Tran, H. S., Bouffioux, C., Dedry, O., Rojas Ulloa, C. E., Duchene, L., Mertens, A., & Habraken, A. (2022). Identification of a soft matrix-hard inclusion material by indentation. International Journal of Mechanical Sciences, 107723. doi:10.1016/j.ijmecsci.2022.107723 Peer Reviewed verified by ORBi |
Rojas-Ulloa, C., Bouffioux, C., Jaramillo, A., García-Herrera, C., Hussain, T., Duchene, L., Riu, G., Roa, J. J., Flores, P., Habraken, A., & Tuninetti, V. (16 March 2021). Nanomechanical Characterization of the Deformation Response of Orthotropic Ti–6Al–4V. Advanced Engineering Materials, 2001341. doi:10.1002/adem.202001341 Peer Reviewed verified by ORBi |
Bouffioux, C., Pesci, R., Boman, R., Caillet, N., Ponthot, J.-P., & Habraken, A. (2016). Comparison of residual stresses on long rolled profiles measured by X-ray diffraction, ring core and the sectioning methods and simulated by FE method. Thin-Walled Structures, 104, 126-134. doi:10.1016/j.tws.2016.03.017 Peer Reviewed verified by ORBi |
Bouffioux, C., Boman, R., Caillet, N., Rich, N., Ponthot, J.-P., & Habraken, A. (2014). Effect of the kinematic hardening in the simulations of the straightening of long rolled profiles. Key Engineering Materials, 611-612, 178-185. doi:10.4028/www.scientific.net/KEM.611-612.178 Peer Reviewed verified by ORBi |
Bouffioux, C., Lequesne, C., Vanhove, H., Duflou, J. R., Pouteau, P., Duchene, L., & Habraken, A. (November 2011). Experimental and numerical study of an AlMgSc sheet formed by an incremental process. Journal of Materials Processing Technology, 211 (11), 1684-1693. doi:10.1016/j.jmatprotec.2011.05.010 Peer Reviewed verified by ORBi |
Henrard, C., Bouffioux, C., Eyckens, P., Sol, H., Duflou, J. R., Van Houtte, P., Van Bael, A., Duchene, L., & Habraken, A. (2011). Forming forces in single point incremental forming: prediction by finite element simulations, validation and sensitivity. Computational Mechanics, 47, 573-590. doi:10.1007/s00466-010-0563-4 Peer Reviewed verified by ORBi |
Henrard, C., Bouffioux, C., Duchene, L., Duflou, J. R., & Habraken, A. (2007). Validation of a new finite element for incremental forming simulation using a dynamic explicit approach. Key Engineering Materials, 344, 495-502. doi:10.4028/0-87849-437-5.495 Peer Reviewed verified by ORBi |
Flores, P., Duchene, L., Bouffioux, C., Lelotte, T., Henrard, C., Pernin, N., Van Bael, A., He, S., Duflou, J., & Habraken, A. (2007). Model Identification and FE Simulations Effect of Different Yield Loci and Hardening Laws in Sheet Forming. International Journal of Plasticity, 23 (3), 420-449. doi:10.1016/j.ijplas.2006.05.006 Peer Reviewed verified by ORBi |
Habraken, A., Bouffioux, C., Carton, M., & Lecomte-Beckers, J. (2007). Study of a 2024 aluminium rod produced by Rotary Forging. Journal of Materials Processing Technology, 184, 19-26. doi:10.1016/j.jmatprotec.2006.10.044 Peer Reviewed verified by ORBi |
Pascon, F., Blès, G., Bouffioux, C., Casotto, S., Bruschi, S., & Habraken, A. (2004). Prediction of distortion during cooling of steel rolled rings using thermal-mechanical-metallurgical finite element model. Steel Grips 2, Supplement Metal Forming 1-3, 457-463. Peer reviewed |
Moureaux, P., Moto Mpong, S., Remy, M., Bouffioux, C., Lecomte-Beckers, J., & Habraken, A. (2002). Identification d'une loi thermo-élasto-viscoplastique en vue de la modélisation du laminage à chaud du cuivre. Journal de Physique IV, 102, 11-361-368. doi:10.1051/jp4:20020513 Peer reviewed |
Habraken, A., Pedro, J. O., Toussaint, P., Maas, F., Bouffioux, C., Breunig, S., Kuhlmann, U., Pourostad, V., Rigueiro, C., & Claudio, B. (03 May 2017). Design guidelines for Optimal Use of HSS in Bridges [Paper presentation]. Workshop OPTIBRI, Stuttgart, Germany. |
Dedry, O., Bouffioux, C., Tran, H. S., Santos Macías, J. G., Habraken, A., & Mertens, A. (2021). Identification of AlSi10Mg matrix behavior by nanoindentation. In 24th International Conference on Material Forming. Liège, Belgium: PoPuPs. doi:10.25518/esaform21.2464 Peer reviewed |
Rabahallah, F., Bouffioux, C., Duchene, L., Vanhove, H., Duflou, J. R., & Habraken, A. (2010). Optimized Remeshing for Incremental Forming Simulation. In Proceedings of the Advances in Materials and Processing Technologies Conference. Peer reviewed |
Bouffioux, C., Pouteau, P., Duchene, L., Vanhove, H., Duflou, J. R., & Habraken, A. (2010). Material data identification to model the single point incremental forming process. International Journal of Material Forming, 3 (Suppl. 1), 979-982. doi:10.1007/s12289-010-0933-7 Peer Reviewed verified by ORBi |
Bouffioux, C., Henrard, C., Eyckens, P., Aerens, R., Van Bael, A., Sol, H., Duflou, J. R., & Habraken, A. (2008). Comparison of the tests chosen for material parameter identification to predict single point incremental forming forces. In N. Asnafi (Ed.), Proceedings of the International Conference of International Deep Drawing Research Group (IDDRG 2008) (pp. 133-144). Peer reviewed |
Bouffioux, C., Eyckens, P., Henrard, C., Aerens, R., Van Bael, A., Sol, H., & Habraken, A. (2008). Identification of material parameters to predict Single Point Incremental Forming forces. International Journal of Material Forming. doi:10.1007/s12289-008-0183-0 Peer Reviewed verified by ORBi |
Lequesne, C., Henrard, C., Bouffioux, C., Duflou, J., & Habraken, A. (2008). Adaptive remeshing for incremental forming simulation. In H. Pavel (Ed.), Proceedings of the 7th International Conference and Workshop on Numerical Simulation od 3D Sheet Metal Forming Processes (NUMISHEET 2008) (pp. 399-403). Zurich, Switzerland: ETH. Peer reviewed |
Van Bael, A., Eyckens, P., He, S., Bouffioux, C., Henrard, C., Habraken, A., Duflou, J., & Van Houtte, P. (2007). Forming limit predictions for single-point incremental sheet metal forming. In E. Cueto & F. Chinesta, Proceedings of the 10th International ESAFORM Conference on Material Forming (pp. 309-314). Springer. Peer reviewed |
Bouffioux, C., Henrard, C., Gu, J., Duflou, J., & Habraken, A. (2007). Development of an inverse method for identification of materials parameters in the single point incremental sheet forming process. In M. Tisza (Ed.), Proceedings of the IDDRG 2007 International Conference. Peer reviewed |
Cooreman, S., Bouffioux, C., Lecompte, D., Debruyne, D., Sol, H., & Vantomme, J. (2006). Elasto-plastic material parameter identification by inverse methods: sensitivity matrix calculation. In Proceedings of the SEM annual conference and exposition 2006. Peer reviewed |
Cooreman, S., Bouffioux, C., Lecompte, D., Sol, H., Vantomme, J., & Debruyne, D. (2006). Computation of the sensitivity matrix used for Elasto-plastic material parameter identification by inverse methods. In Congress on theoretical and applied Mechanics, Mons, Belgium, May 2006. doi:10.1016/j.ijsolstr.2006.11.024 Peer reviewed |
Bouffioux, C., Carton, M., Lecomte-Beckers, J., & Habraken, A. (2005). Determination of the optimal forging conditions of a Cr-Mo-V high alloy steel through a microstructural, thermophysical and mechanical study. In D. Banabic, Proceedings of the 8th ESAFORM Conference on Material Forming (Vol. 1) (pp. 45-48). Cluj Napoca, Romania: The publishing House of the Romanian Academy. Peer reviewed |
Henrard, C., Bouffioux, C., Godinas, A., & Habraken, A. (2005). Development of a contact model adapted to incremental forming. In D. Banabic (Ed.), Proceedings of the 8th ESAFORM Conference on Material Forming (pp. 27-29). The publishing House of the Romanian Academy. Peer reviewed |
He, S., Van Bael, A., Van Houtte, P., Tunckol, Y., Duflou, J., Henrard, C., Bouffioux, C., & Habraken, A. (2005). Effect of FEM choices in the modelling of incremental forming of aluminium sheets. In D. Banabic (Ed.), Proceedings of the 8th ESAFORM Conference on Material Forming (pp. 711-714). The publishing House of the Romanian Academy. Peer reviewed |
Flores, P., Duchene, L., Lelotte, T., Bouffioux, C., El Houdaigui, F., Van Bael, A., He, S., & Habraken, A. (2005). Model identification and FE simulations: effect of different yield loci and hardening laws in sheet forming. In L. M. Smith, F. Pourboghrat, J. W. Yoon, ... T. B. Stoughton (Eds.), On the Cutting Edge of Technology NUMISHEET 2005, Proceedings of the 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (AIP Confernce Proceedings, Vol 778, pp. 371-381). Melville (New York), United States: American Institute of Physics (AIP). Peer reviewed |
Bouffioux, C., Carton, M., Lecomte-Beckers, J., & Habraken, A. (2004). Study of the cooling process of an extruded aluminium profile. In S. Gosh, J. M. Castro, ... J. K. Lee, Proceedings of Materials Processing and Design: Modeling, Simulation and Applications (NUMIFORM 2004) (pp. 1022-1027). American Institute of Physics AIP Conference Proceedings. Peer reviewed |
Habraken, A., Bouffioux, C., Dedry, O., Fetni Seif, Sepulveda, H., Duchene, L., & Mertens, A. (25 May 2023). Fatigue crack prediction in Multiphasic-Phasic Material [Paper presentation]. 3rd Benelux Network Meeting and Workshop on Damage and Fracture Mechanics (BDFM-2023). |
Bouffioux, C., Papeleux, L., Tran, H. S., Ponthot, J.-P., Duchene, L., & Habraken, A. (28 April 2022). Development of a 2.5D Representative Volume Element model of AlSi10Mg material produced by additive manufacturing [Paper presentation]. ESAFORM 2022, Braga, Portugal. Peer reviewed |
Tran Hoang, S., Bouffioux, C., Dedry, O., Delahaye, J., El Fetni, S., Mertens, A., & Habraken, A. (04 April 2022). Prediction of static properties of LPBFAlSi10Mg samples post-treated by Friction Stir Processing or thermal treatments [Paper presentation]. EMMC18 – 18th European Mechanics of Materials Conference. Peer reviewed |
Bouffioux, C., Canales Cardenas, C., Duchene, L., Ponthot, J.-P., & Habraken, A. (June 2017). FATIGUE CRACK PROPAGATION IN HSS S690QL WELDED CONNECTIONS IN BRIDGES [Paper presentation]. 14th International Conference on Fracture - ICF14, Rhodes, Greece. |
Habraken, A., Duchene, L., Bouffioux, C., & Canales Cardenas, C. (03 May 2017). OPTIBRI Opening and Project Overview [Paper presentation]. Design Guidelines for Optimal Use of HSS in Bridges - OptiBri Workshop, Stuttgart, Germany. |
Bouffioux, C., Habraken, A., Duchene, L., & Canales Cardenas, C. (03 May 2017). Characterization of Fatigue Behaviour, from Material Science to Civil Engineering Applications [Paper presentation]. Design Guidelines for Optimal Use of HSS in Bridges - OptiBri Workshop, Stuttgart, Germany. |
Habraken, A., Duchene, L., Bouffioux, C., & Canales Cardenas, C. (2017). Optimal use of High Strength Steel grades within bridge. |
Levasseur, S., & Bouffioux, C. (2013). Back Analysis and optimisation method with Lagamine [Paper presentation]. First International Workshop on the Finite Element Code Lagamine, Liège, Belgium. |