  | Delahaye, J., Tchuindjang, J. T., Lecomte-Beckers, J., Rigo, O., Habraken, A., & Mertens, A. (15 August 2019). Influence of Si precipitates on fracture mechanisms of AlSi10Mg parts processed by Selective Laser Melting. Acta Materialia, 175, 160-170. doi:10.1016/j.actamat.2019.06.013  Peer Reviewed verified by ORBi |
 | Hashemi, S. N., Tchuindjang, J. T., Dedry, O., Montrieux, H.-M., Lecomte-Beckers, J., Carrus, R., Habraken, A., & Mertens, A. (12 July 2018). High Temperature Wear Behaviour of High Speed Steel Thick Deposits Obtained by Laser Cladding [Paper presentation]. Thermec 2018 - International Conference on Processing & Manufacturing of Advanced Materials, Paris, France. Peer reviewed |
 | Delahaye, J., Mertens, A., Dedry, O., Rigo, O., Vertruyen, B., Lecomte-Beckers, J., & Habraken, A. (21 September 2017). Effect of solution treatment on the fracture mechanisms of AlSi10Mg parts produced by Selective Laser Melting [Poster presentation]. European Congress and Exhibition on Advanced Materials and Processes (EUROMAT), Thessaloniki, Greece. Peer reviewed |
 | Montrieux, H.-M., Lecomte-Beckers, J., Halleux, J., & Mertens, A. (07 September 2017). Validation of a TEOS based sol-gel coating for the protection of carbon fibres against oxidation regarding their use in metal matrix composites [Poster presentation]. 19th International Sol-Gel Conference, Liège, Belgium. Peer reviewed |
 | Mertens, A., Delahaye, J., & Lecomte-Beckers, J. (29 August 2017). Fusion-based Additive Manufacturing for Processing Aluminum Alloys: State-of-the-Art and Challenges. Advanced Engineering Materials, 19 (8), 1700003. doi:10.1002/adem.201700003 Peer Reviewed verified by ORBi |
 | Tchuindjang, J. T., Hashemi, S. N., Dedry, O., Sinnaeve, M., & Lecomte-Beckers, J. (2017). Effects of High Solidification Rates on Segregations and Solid Phase Transformations in High Speed Steels. In ABRASION 2017 - The 6th International COnference on Abrasion Wear Resistant Alloyed White Cast Iron for Rolling and Pulverizing Mills. |
 | Tran, H. S., Tchuindjang, J. T., Paydas, H., Mertens, A., Tomé Jardin, R. A., Duchene, L., Carrus, R., Lecomte-Beckers, J., & Habraken, A. (15 August 2017). 3D thermal finite element analysis of laser cladding processed Ti-6Al-4V part with microstructural correlations. Materials and Design, 128, 130-142. doi:10.1016/j.matdes.2017.04.092 Peer Reviewed verified by ORBi |
 | Tchuindjang, J. T., Sinnaeve, M., & Lecomte-Beckers, J. (2017). Effects of High Solidification Rates on Segregations and Solid Phase Transformations in High Speed Steels. In Y. MATSUBARA, N. SASAGURI, ... K. YAMAMOTO (Eds.), ABRASION 2017 - The 6th International COnference on Abrasion Wear Resistant Alloyed White Cast Iron for Rolling and Pulverizing Mills (pp. 161-178). Peer reviewed |
 | Mertens, A., Storti, M., Simar, A., Dedry, O., Montrieux, H.-M., & Lecomte-Beckers, J. (10 July 2017). Thermal treatments for tailoring the microstructure and wear behaviour of friction stir processed Aluminium-C fibres composites [Paper presentation]. International Conference on Frontiers in Materials Processing, Applications, Research & technology, Bordeaux, France. Peer reviewed |
Bister, G., Hautcoeur, D., Deschuyteneer, D., Nyssen, P., Cambier, M., Juste, E., Mertens, A., Dedry, O., Lecomte-Beckers, J., Lardot, V., & Cambier, F. (July 2017). Functional refractory molds for metal casting built by additive manufacturing [Paper presentation]. ECerS2017 - 15th conference and exhibition of the European Ceramic Society, Budapest, Hungary. Peer reviewed |
Delahaye, J., Rigo, O., Lecomte-Beckers, J., Habraken, A., & Mertens, A. (28 June 2017). Influence of Si precipitates on fracture mechanisms of AlSi10Mg parts processed by Selective Laser Melting [Paper presentation]. Workshop on Metal additive manufacturing, Louvain-la-Neuve, Belgium. |
  | Tomé Jardin, R. A., Tchuindjang, J. T., Paydas, H., Carrus, R., Mertens, A., Lecomte-Beckers, J., Habraken, A., & Tran, H. S. (28 June 2017). Thermal history modelling to understand microstructures observed in repair technology of Ti-6Al-4V [Paper presentation]. Workshop on metal additive manufacturing, Louvain-la-Neuve, Belgium. |
 | Hashemi, S. N., Tchuindjang, J. T., Dedry, O., Montrieux, H.-M., Carrus, R., Lecomte-Beckers, J., Habraken, A., & Mertens, A. (28 June 2017). Wear behaviour of laser clad High Speed Steels thick deposits [Paper presentation]. Workshop on Metal additive manufacturing, Louvain-la-Neuve, Belgium. |
 | Neira Torres, I., Gilles, G., Tchuindjang, J. T., Flores, P., Lecomte-Beckers, J., & Habraken, A. (June 2017). FE modeling of the cooling and tempering steps of bimetallic rolling mill rolls. International Journal of Material Forming, Volume 10, (Issue 3), 287–305. doi:10.1007/s12289-015-1277-0 Peer Reviewed verified by ORBi |
 | Hashemi, S. N., Mertens, A., Montrieux, H.-M., Tchuindjang, J. T., Dedry, O., Carrus, R., & Lecomte-Beckers, J. (15 April 2017). Oxidative wear behaviour of laser clad high speed steel thick deposits: influence of sliding speed, carbide type and morphology. Surface and Coatings Technology, 315, 519-529. doi:10.1016/j.surfcoat.2017.02.071 Peer Reviewed verified by ORBi |
Simar, A., Ryelandt, S., Delannay, F., Mertens, A., Lecomte-Beckers, J., & Brassart, L. (28 February 2017). Micro-mechanical testing of magnesium based composites reinforced by carbon fibers manufactured by friction stir processing [Paper presentation]. TMS 2017 146th Annual Meeting and Exhibition, San Diego (CA), United States. Peer reviewed |
 | Mertens, A., L'Hoest, T., Magnien, J., Carrus, R., & Lecomte-Beckers, J. (2017). On the Elaboration of Metal-Ceramic Composite Coatings by Laser Cladding. Materials Science Forum, 879, 1288-1293. doi:10.4028/www.scientific.net/MSF.879.1288 Peer reviewed |
 | De Baere, K., Verstraelen, H., Willemen, R., Smet, J.-P., Tchuindjang, J. T., Lecomte-Beckers, J., Lenaerts, S., Meskens, R., Jung, H. G., & Potters, G. (2017). Assessment of corrosion resistance, material properties, and weldability of alloyed steel for ballast tanks. Journal of Marine Science and Technology, 22 (1), 176-199. doi:10.1007/s00773-016-0402-1 Peer Reviewed verified by ORBi |
 | Tran, H. S., Tchuindjang, J. T., Hakan, P., Jardin, R., Carrus, R., Lecomte-Beckers, J., & Habraken, A. (2017). Thermal history modelling to understand microstructures observed in repair technology of Ti-6Al-4V. In Extended Abstract book of 14th Conf. on Computer Methods in Materials Technology KomPlasTech 2017. |
Tran, H. S., Brusten, R., Jardin, R., Paydas, H., Carrus, R., Duchene, L., Lecomte-Beckers, J., & Habraken, A. (03 November 2016). Laser Cladding Finite Element Modelling Application to Ti6Al4V [Paper presentation]. IAP INTEMATE Plenary session meeting, Gent, Belgium. |
 | Mertens, A., Paydas, H., Rigo, O., Carrus, R., & Lecomte-Beckers, J. (05 August 2016). On the effect of microstructural anisotropy on the mechanical and thermophysical properties of Ti6Al4V processed by Laser Beam Melting [Paper presentation]. The 9th Pacific Rim International Conference on Advaced Materials and Processing (PRICM9), Kyoto, Japan. Peer reviewed |
Bister, G., Hautcoeur, D., Deschuyteneer, D., Nyssen, P., Juste, E., Mertens, A., Dedry, O., Lecomte-Beckers, J., Lardot, V., & Cambier, F. (19 July 2016). Alumina and zircon refractory ceramic molds fabrication by additive methods for metal alloys casting [Paper presentation]. 6th International Conference on Shaping of Advanced Ceramics, Montpellier, France. Peer reviewed |
 | Mertens, A., & Lecomte-Beckers, J. (2016). On the role of interfacial reactions, dissolution and secondary precipitation during the laser additive manufacturing of metal matrix composites - A Review. In I. V. Shishkovsky (Ed.), New Trends in 3D Printing (pp. 187-213). Rijeka, Croatia: Intech. doi:10.5772/63045 Peer reviewed |
 | Tomé Jardin, R. A., Tran, H. S., Hashemi, S. N., Lecomte-Beckers, J., Carrus, R., & Habraken, A. (05 July 2016). A 2D and 3D thermal model of powder injection laser cladding [Paper presentation]. NUMIFORM, Troyes, France. |
Jardin, R., Hoang, S. T., Hashemi, S. N., Lecomte-Beckers, J., Carrus, R., & Habraken, A. (2016). 2D and 3D FE models of laser cladding process. In Booklet of the conference with extended abstract and short paper of less than 6 pages. Peer reviewed |
 | Mertens, A., Dedry, O., Reuter, D., Rigo, O., & Lecomte-Beckers, J. (01 June 2016). Microstructural evolution during the heat treatment of Laser Beam Melted AlSi10Mg [Paper presentation]. Thermec 2016 International Conference on Processing and Manufacturing of Advanced Materials, Graz, Austria. Peer reviewed |
 | Mertens, A., L'Hoest, T., Lecomte-Beckers, J., Magnien, J., & Carrus, R. (27 May 2016). On the laser additive manufacturing of metal matrix composites [Paper presentation]. Additive Manufacturing Workshop Brussels, Bruxelles, Belgium. |
 | Mertens, A., Dedry, O., Lecomte-Beckers, J., Reuter, D., & Rigo, O. (26 May 2016). Understanding the effect of thermal treatments on the ductility of LBM AlSi10Mg [Paper presentation]. Additive Manufacturing Workshop Brussels, Bruxelles, Belgium. |
Tran, H. S., Brusten, R., Paydas, H., Duchene, L., Tomé Jardin, R. A., Lecomte-Beckers, J., & Habraken, A. (20 May 2016). 3-D finite element analysis of laser cladding process. Application to Ti-6Al-4V [Paper presentation]. International conference on COmputational methods in Manufacturing Processes (ICOMP’2016), Liege, Belgium. |
 | Tchuindjang, J. T., Dedry, O., Hashemi, S. N., & Lecomte-Beckers, J. (12 May 2016). Microstructure et propriétés de revêtements épais à résistance à l’usure améliorée obtenus par additive manufacturing [Paper presentation]. Innovative and Sustainable Coatings:Améliorer durablement les propriétés mécaniques et esthétiques de vos substrats métalliques, Mons, Belgium. |
 | Mertens, A., Paydas, H., Tchuindjang, J. T., Contrepois, Q., Carrus, R., & Lecomte-Beckers, J. (2016). On the Laser Cladding of Ti Alloy Ti-6Al-4V with Low Laser Power. In V. Ventakesh, A. L. Pilchak, J. E. Allison, S. Ankem, R. Boyer, J. Christodoulou, H. L. Fraser, M. A. Imam, Y. Kosaka, A. Chatterjee, ... A. Woodfield (Eds.), Proc. of the 13th World Conference on Titanium (pp. 1299-1304). Hoboken, United States - New Jersey: John Wiley & Sons. doi:10.1002/9781119296126.ch220 Peer reviewed |
  | Gravet, D., Carton, M., Contrepois, Q., Mertens, A., Dedry, O., Lecomte-Beckers, J., & Dormal, T. (2016). RAPPORT FINAL - Portefeuille de projets TipTopLam. Liège, Belgium: Sirris. |
 | Bister, G., Deschuyteneer, D., Hautcoeur, D., Nyssen, P., Juste, E., Mertens, A., Dedry, O., Lecomte-Beckers, J., Lardot, V., & Cambier, F. (23 March 2016). Refractory ceramic molds fabrication by additive methods for low and high melting point metal alloys casting [Paper presentation]. Journées annuelles GFC - BCerS, Valenciennes, France. Peer reviewed |
 | Mertens, A., Hashemi, S. N., Tchuindjang, J. T., Dedry, O., Carrus, R., Habraken, A., & Lecomte-Beckers, J. (09 February 2016). Local thermal history during the laser additive manufacturing of steel [Paper presentation]. 4th CFD and Thermomechanics Days, Maizières, France. |
| Dedry, O., Mertens, A., & Lecomte-Beckers, J. (2016). FLYCOAT - Programme d'excellence : Rapport scientifique et technique 1°phase 1er Mars 2015 au 29 Février 2016. Univéristé de Liège. |
 | Pincheira, G., Montalba, C., Gacitua, W., Montrieux, H.-M., Lecomte-Beckers, J., Meléndrez, M. F., & Flores, P. (2016). Study of the effect of amino-functionalized multiwall carbon nanotubes on dry sliding wear resistance properties of carbon fiber reinforced thermoset polymers. Polymer Bulletin. doi:10.1007/s00289-016-1608-4 Peer Reviewed verified by ORBi |
 | Paydas, H., Mertens, A., Carrus, R., Lecomte-Beckers, J., & Tchuindjang, J. T. (15 November 2015). Laser cladding as repair technology for Ti6Al4V alloy: Influence of building strategy on microstructure and hardness. Materials and Design, 85, 497-510. doi:10.1016/j.matdes.2015.07.035 Peer Reviewed verified by ORBi |
 | Bister, G., Deschuyteneer, D., Hautcoeur, D., Nyssen, P., Juste, E., Mertens, A., Lecomte-Beckers, J., Lardot, V., & Cambier, F. (26 October 2015). Production of alumina foundry moulds by additive manufacturing for low and high melting points alloys prototypes [Poster presentation]. Annual meeting of the Belgian Ceramic Society, Mons, Belgium. Peer reviewed |
 | Hashemi, S. N., Gilles, G., Tomé Jardin, R. A., Tran, H. S., Mertens, A., Carrus, R., Lecomte-Beckers, J., & Habraken, A. (23 October 2015). 2D Thermal model of powder injection laser cladding of high speed steels (HSS) [Paper presentation]. European Mechanics Society (EUROMECH). Peer reviewed |
 | Hashemi, S. N., Lecomte-Beckers, J., Montrieux, H.-M., Dedry, O., & Tchuindjang, J. T. (September 2015). Comparison of the wear behavior of high speed steel grades obtained from conventional casting and laser cladding [Paper presentation]. Euromat 2015 - European Congress and Exhibition on Advanced Materials and Processes, Warsaw, Poland. |
 | Tchuindjang, J. T., Habraken, A., & Lecomte-Beckers, J. (September 2015). Study of the Crystallization Behavior and the Subsequent Martensitic Transformation in a High Chromium Cast Steel submitted to Different Austenitization Temperatures [Paper presentation]. Euromat 2015 - European Congress and Exhibition on Advanced Materials and Processes, Warsaw, Poland. |
| Dedry, O., Lecomte-Beckers, J., Novello, F., & Denosse, V. (2015). Rapport scientifique et technique final : Tenue à chaud des matériaux métalliques dans des conditions extrêmes - METALEX, Convention n°1217562. Liège, Belgium: CRM. |
 | Tchuindjang, J. T., Paydas, H., Hashemi, S. N., Dedry, O., & Lecomte-Beckers, J. (July 2015). Carbides and grain size quantification methods in high speed steel alloys [Paper presentation]. 14th International Congress for Stereology and Image Analysis (14th ICSIA), Liège, Belgium. |
| Tchuindjang, J. T., Paydas, H., Hashemi, S. N., Dedry, O., & Lecomte-Beckers, J. (July 2015). Development of quantification methods applied to HSS alloys for carbides volume fraction and grain size assessments [Poster presentation]. 14th International Congress for Stereology and Image Analysis (14th ICSIA), Liège, Belgium. |
| Contrepois, Q., Mertens, A., Dedry, O., & Lecomte-Beckers, J. (2015). TipTopLam - Rapid manufacturing laser de pièces en titane (2008-2015), volet 2: FGM Porosité. Sirris. |
| Carton, M., Contrepois, Q., Mertens, A., & Lecomte-Beckers, J. (2015). TipTopLam - Rapid manufacturing laser de pièces en titane (2008-2015), volet 1: Caractérisation microstructurale. Sirris. |
 | Neira Torres, I., Tchuindjang, J. T., Sinnaeve, M., Flores, P., Lecomte-Beckers, J., & Habraken, A. (2015). Determination of Stress and Strain Fields in Cast and Heat Treated Bimetallic Rolling Mill Rolls. In Proceedings of the Iron & Steel Technology Conference and Exposition (AISTech 2015 & ICSTI) (pp. 2706-2716). Peer reviewed |
 | Gilles, G., Neira Torres, I., Tchuindjang, J. T., Sinnaeve, M., Flores, P., Lecomte-Beckers, J., & Habraken, A. (2015). Modelling of stress field evolution in bimetallic rolling mill rolls during the manufacturing process. In Proceedings of the 5th Conference on rolling mill rolls for metals processing Rolls 5 2015. |
 | Tchuindjang, J. T., Neira Torres, I., Fores, P., Habraken, A., & Lecomte-Beckers, J. (12 March 2015). Phase Transformations and Crack Initiation in a High-Chromium Cast Steel Under Hot Compression Tests. Journal of Materials Engineering and Performance, 24 (5), 2025-2041. doi:10.1007/s11665-015-1464-7 Peer Reviewed verified by ORBi |
| Tchuindjang, J. T., Paydas, H., & Lecomte-Beckers, J. (2015). Rapport des analyses chimiques, fractographiques et métallographiques sur des vis M24 (12.9) rompues en service. |
| Paydas, H., Tchuindjang, J. T., & Lecomte-Beckers, J. (2015). Rapport des analyses visuelle et au binoculaire réalisées sur des robinets en laiton rompus en service. |
| Paydas, H., Tchuindjang, J. T., & Lecomte-Beckers, J. (2015). Rapport des analyses métallographiques sur un serre-câble reçu dans un état usagé et non-corrodé. |
 | Mertens, A., Simar, A., Adrien, J., Maire, E., Montrieux, H.-M., Delannay, F., & Lecomte-Beckers, J. (2015). Influence of Fibre Distribution and Grain Size on the Mechanical Behaviour of Friction Stir Processed Mg-C Composites. Materials Characterization, 107, 125. doi:10.1016/j.matchar.2015.07.010 Peer Reviewed verified by ORBi |
 | Rassili, A., & Lecomte-Beckers, J. (2015). Tooling Materials and Solutions for Thixoforming: A key to the process industrialization. Solid State Phenomena, 217-218, 374-380. Peer reviewed |
 | Hashemi, S. N., Dedry, O., Lecomte-Beckers, J., Montrieux, H.-M., Walmag, Carrus, R., & Tchuindjang, J. T. (2015). Comparison of the wear behavior of high speed steel grades obtained from conventional casting and laser cladding. In Materiaux et tribologie jift 2014. Peer reviewed |
 | Mertens, A., & Lecomte-Beckers, J. (January 2015). Metal matrix nanocomposite coatings for improving the usage properties of metallic materials [Paper presentation]. Workshop “How to optimise your coating using nano technology”, Liège, Belgium. |
| Lecomte-Beckers, J., Tchuindjang, J. T., & Paydas, H. (2015). RAPPORT SCIENTIFIQUE & TECHNIQUE FINAL - Projet BLUM – RW 6800. ULg - Université de Liège. |
 | Mertens, A., Dedry, O., Reuter, D., Rigo, O., & Lecomte-Beckers, J. (2015). Thermal Treatments of AlSi10Mg Processed by Laser Beam Melting. In D. Bourell (Ed.), Proceedings of the 26th International Solid Freeform Fabrication Symposium (pp. 1007-1016). Peer reviewed |
| Paydas, H., Tchuindjang, J. T., & Lecomte-Beckers, J. (2014). Rapport des analyses métallographiques sur trois serre-câbles reçus dans 3 états différents. |
| Tchuindjang, J. T., Paydas, H., & Lecomte-Beckers, J. (2014). Influence de la température de service sur des chainons de bandes transporteuses (flights) pour four de cuisson de laine de verre. |
 | Rassili, A., & Lecomte-Beckers, J. (September 2014). Tooling materials and solutions for thixoforming steel: A key to the process industrialization. Solid State Phenomena, 217-218, 374-380. doi:10.4028/www.scientific.net/SSP.217-218.374 Peer reviewed |
| Paydas, H., & Lecomte-Beckers, J. (2014). Rapport des analyses métallographiques sur un arbre à came traité thermiquement. |
 | Lecomte-Beckers, J., Dedry, O., Oakey, J., & Kuhn, B. (Eds.). (2014). Proceedings of the 10th Conference on Materials for Advanced Power Engineering 2014. Juelich, Germany: FZ. Juelich. |
 | Novello, F., Dedry, O., De Noose, V., & Lecomte-Beckers, J. (2014). HIGH TEMPERATURE CORROSION RESISTANCE OF METALLIC MATERIALS IN HARSH CONDITIONS. In J. Lecomte-Beckers, O. Dedry, J. Oakey, ... B. Kuhn (Eds.), Proceedings of the 10th Conference on Materials for Advanced Power Engineering 2014. Juelich, Germany: FZ. Juelich. Peer reviewed |
| Lecomte-Beckers, J., & Dedry, O. (2014). Rapport Final - PROJET ULTRA CB - CONVENTION RW 6418 : Etude de faisabilité dans le développement de nano-revêtements sol-gels capables d’assurer une protection anticorrosion dans les applications soumises à des contraintes mécaniques et thermiques. ULg - Université de Liège. |
 | Tchuindjang, J. T., Neira Torres, I., Habraken, A., Sinnaeve, M., & Lecomte-Beckers, J. (2014). Characterization of the Solidification Path, the Solid State Transformations and the Mechanical Behavior of a High Chromium Cast Steel. In T. Nylen (Other coll.), Proceedings of the 5th Abrasion Conference - 2014. |
| Tchuindjang, J. T., Paydas, H., & Lecomte-Beckers, J. (2014). Rapport des analyses chimiques, métallographiques et fractographiques sur une butée de sécurité en aluminium 5xxx, rompue en service. |
 | Mertens, A., & Lecomte-Beckers, J. (2014). Processing metallic materials by additive technologies - Specificities of the thermal history and microstructures [Paper presentation]. "Business meets research" - Workshop on Additive Manufacturing, Luxembourg, Luxembourg. |
| Tchuindjang, J. T., Paydas, H., & Lecomte-Beckers, J. (2014). AVIS SCIENTIFIQUE SUR ANALYSE COMPAREE DE DEUX MINI-COCOTTES EN FONTE EMAILLEE AYANT DES ORIGINES DIFFERENTES. |
| Mertens, A., & Lecomte-Beckers, J. (20 May 2014). Les composites à matrice métallique/céramique – De nouveaux procédés de fabrication pour de nouvelles applications [Paper presentation]. Nouveaux matériaux à haute performance : Les composites à matrice métallique/céramique, Liège, Belgium. |
 | Hashemi, S. N., Montrieux, H.-M., Tchuindjang, J. T., & Lecomte-Beckers, J. (12 May 2014). Laser cladded high speed steel coatings : High temperature friction and wear characterization with the pin’on’disc device [Poster presentation]. IAP P7/21 INTEMATE Meeting. |
| Tchuindjang, J. T., Paydas, H., & Lecomte-Beckers, J. (2014). Rapport des analyses métallographiques et fractographiques sur tubes en AA 7075-T6, dont un rompu lors d’un test de qualification. |
 | Mertens, A., Paydas, H., Reginster, S., Contrepois, Q., Dormal, T., Lemaire, O., & Lecomte-Beckers, J. (May 2014). Processing of alloy Ti-6Al-4V and of stainless steel 316L by Laser Beam Melting [Paper presentation]. 2nd Spring Meeting, IAP 7/21, Intermate "Multiscale Mechanics of Interface Dominated Materials", Gand, Belgium. |
| Tchuindjang, J. T., Paydas, H., & Lecomte-Beckers, J. (2014). Rapport des analyses chimiques et métallographiques sur tuyauteries en acier galvanisé perforées en service. |
 | Hashemi, S. N., Tchuindjang, J. T., Dedry, O., & Lecomte-Beckers, J. (27 March 2014). Laser cladded high speed steel coatings : Effect of the laser parameters on microstructure and properties of laser cladded coatings [Paper presentation]. IAP P7/21 INTEMATE Meeting. |
| Neira Torres, I., Tchuindjang, J. T., Lecomte-Beckers, J., & Habraken, A. (05 February 2014). A FEM approach to study phase transformation within bimetallic rolls [Paper presentation]. CFD and Thermomechanics days 2014, Maizières-lès-metz, France. |
 | Mertens, A., & Lecomte-Beckers, J. (2014). Techniques additives vs techniques conventionnelles-les microstructures [Paper presentation]. Journée d'étude : "Imprimante 3D, Techniques Additives : une révolution industrielle, Liège, Belgium. |
 | Neira Torres, I., Gilles, G., Tchuindjang, J. T., Lecomte-Beckers, J., sinnaeve, M., & Habraken, A. (2014). Study of residual stresses in bimetallic work rolls. Advanced Materials Research, 996, 580-585. doi:10.4028/www.scientific.net/AMR.996.580 Peer reviewed |
 | Giraud, E., Pace, S., & Lecomte-Beckers, J. (2014). Elaboration of Thin Foils in Copper and Zinc by Self-Induced Ion Plating. Medziagotyra, 20 (2), 160-164. doi:10.5755/j01.ms.20.2.4019 Peer Reviewed verified by ORBi |
 | Mertens, A., Reginster, S., Contrepois, Q., Dormal, T., Lemaire, O., & Lecomte-Beckers, J. (2014). Microstructures and Mechanical Properties of Stainless Steel AISI 316L Processed by Selective Laser Melting. Materials Science Forum, 783-786 (2014), 898-903. doi:10.4028/www.scientific.net/MSF.783-786.898 Peer reviewed |
| Tchuindjang, J. T., Paydas, H., & Lecomte-Beckers, J. (2014). Rapport des analyses métallographiques et fractographiques sur une vanne en laiton rompue en service. |
| Lecomte-Beckers, J., Mertens, A., Carton, M., & Contrepois, Q. (2014). Rapport Final, Projet FEDER Programmation 2007-2013, portefeuille de projets SINUS : Simulation Numérique Haute Performance. ULg - Université de Liège. |
 | Mertens, A., Reginster, S., Paydas, H., Contrepois, Q., Dormal, T., Lemaire, O., & Lecomte-Beckers, J. (2014). Mechanical properties of alloy Ti-6Al-4V and of stainless steel 316L processed by Selective Laser Melting: Influence of out-of-equilibrium microstructures. Powder Metallurgy, 57 (3), 184-189. doi:10.1179/1743290114Y.0000000092 Peer Reviewed verified by ORBi |
 | Mertens, A., Simar, A., Garray, D., Halleux, J., Montrieux, H.-M., & Lecomte-Beckers, J. (05 December 2013). Friction Stir Processing of Magnesium Matrix Composites Reinforced with Carbon Fibres or Carbon Nanotubes - A Comparative Study [Paper presentation]. Thermec 2013 "International Conference on Processing & Manufacturing of Advanced Materials", Las Vegas (NV), United States. Peer reviewed |
| Tchuindjang, J. T., Paydas, H., & Lecomte-Beckers, J. (2013). Chemical and Metallographic Analyses on Steel Flights of various origin used in a Curing Oven. |
 | Hashemi, S. N., Montrieux, H.-M., Tchuindjang, J. T., & Lecomte-Beckers, J. (12 November 2013). Laser cladded high speed steel coatings : High temperature friction and wear characterization with the pin’on’disc device [Poster presentation]. IAP P7/21 INTEMATE Meeting. |
 | Mertens, A., Paydas, H., Reginster, S., Contrepois, Q., Dormal, T., Lemaire, O., & Lecomte-Beckers, J. (07 November 2013). Measuring the thermophysical properties of materials at high temperature - Application to the additive manufacturing of alloy Ti-6Al-4V and of stainless steel 316L [Paper presentation]. 2013 BEMEKO workshop on measurement : Challenges and Opportunities, Liège, Belgium. Peer reviewed |
| Lecomte-Beckers, J., Tchuindjang, J. T., Dedry, O., & Reginster, S. (2013). Rapport Final, PROJET RECYLCLAD RW 11-1-7335 : Fabrication de Cylindres Bimétalliques par Rechargement Laser (Laser Cladding) d’Aciers à Outils optimisés sur Axes Réutilisables. ULg - Université de Liège. |
 | Montrieux, H.-M., Lecomte-Beckers, J., & Mertens, A. (October 2013). Les matrices métalliques et céramiques : de nouveaux matériaux composites. Plus Composites, article n°3. |
 | Mertens, A., Reginster, S., Paydas, H., Dormal, T., Lemaire, O., & Lecomte-Beckers, J. (12 September 2013). On the Role of Out-of-Equilibrium Microstructures in Ti-6Al-4V and in Stainless Steel 316L Processed by Selective Laser Melting in Determining their Mechanical Properties [Paper presentation]. EUROMAT 2013 - European Congress and Exhibition on Advanced Materials and Processes, Sevilla, Spain. Peer reviewed |
| Neira Torres, I., Lecomte-Beckers, J., Tchuindjang, J. T., Habraken, A., & Gilles, G. (10 September 2013). Study of phase transformations within bimetallic rolling mills [Paper presentation]. First International Workshop Lagashop 2013, Liége, Belgium. |
 | Mertens, A., Simar, A., Garray, D., Halleux, J., Montrieux, H.-M., & Lecomte-Beckers, J. (09 September 2013). Microstructure and Thermomechanical Behaviour of Magnesium – C nanotubes Composites produced by Friction Stir Processing [Paper presentation]. EUROMAT 2013 - European Congress and Exhibition on Advanced Materials and Processes, Sevilla, Spain. Peer reviewed |
 | Montrieux, H.-M., Demy, P., Ibarra-Castanedo, C., Mertens, A., Gerlach, N., Lecomte-Beckers, J., & Maldague, X. (2013). Comparison between optical pulsed thermography and vibrothermography for the assessment of carbon fibers composite materials. In X. Maldague (Ed.), Advances in Signal Processing for Non Destructive Evaluation of Materials Proceedings of the VIIth International Workshop and selected papers from 16th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2013) (978-2-9809199-4-7). Canada: É. Du CAO. Peer reviewed |
 | Hashemi, S. N., & Lecomte-Beckers, J. (21 May 2013). Study of Phase Transformations in Tool Steels obtained from a Laser Metal Deposition Process [Paper presentation]. IAP P7/21 INTEMATE Meeting. |
| Tchuindjang, J. T., Paydas, H., & Lecomte-Beckers, J. (2013). Study and Characterization of Seawater Corrosion on 3 Carbon steels. |
 | Lecomte-Beckers, J., Tchuindjang, J. T., & Paydas, H. (2013). Présentation d'un cas de corrosion microbienne dans la station d’épuration de Liège-Oupeye [Paper presentation]. Séminaire Aquawal, Oupeye, Belgium. |
 | Lecomte-Beckers, J., Lecomte, J., Gerlach, N., Collard, V., Svarova, P., Wenkin, M., & Novello, F. (04 April 2013). Research on durable junction of multimaterials [Poster presentation]. 4th International Materials Education Symposium, Cambridge, United Kingdom. |
| Tchuindjang, J. T., Paydas, H., & Lecomte-Beckers, J. (2013). Rapport des analyses métallos et MEB-EDS sur des tuyauteries inox corrodées en service. |
| Lecomte-Beckers, J., & Paydas, H. (2013). Rapport Final, Projet BLISK, Convention RW 6247 : BLaded dISK. ULg - Université de Liège. |
 | Neira Torres, I., Gilles, G., Tchuindjang, J. T., Lecomte-Beckers, J., Sinnaeve, M., & Habraken, A. (2013). Prediction of residual stresses by FE simulations on bimetallic work rolls during cooling. Computer Methods in Materials Science, 13 (1), 84-91. Peer reviewed |
 | Reginster, S., Mertens, A., Paydas, H., Tchuindjang, J. T., Contrepois, Q., Dormal, T., Lemaire, O., & Lecomte-Beckers, J. (2013). Processing of Ti alloys by additive manufacturing: a comparison of the microstructures obtained by laser cladding, selective laser melting and electron beam melting. Materials Science Forum, 765, 431-417. doi:10.4028/www.scientific.net/MSF.765.413 Peer reviewed |
| Lecomte-Beckers, J., Gerlach, N., & Lecomte, J. (2013). Rapport Final, Projet Région wallonne R.RWAL.2626-J-F-D, RONDUJUM : Research ON DUrable JUnction of Multimaterials. ULg - Université de Liège. |
 | Hashemi, S. N., Montrieux, H.-M., Tchuindjang, J. T., & Lecomte-Beckers, J. (2013). Laser cladded high speed steel coatings : High temperature friction and wear characterization with the pin’on’disc device [Poster presentation]. BEMEKO workshop on measurement. |
| Tchuindjang, J. T., Paydas, H., & Lecomte-Beckers, J. (2013). Rapport des analyses Métallographiques, Fractographiques et Chimique sur une Bride DN100 PN100 en Inox rompue en service. |
 | Rassili, A., Falzone, S., & Lecomte-Beckers, J. (2013). Tooling Materials and Solutions for Thixoforming of Steel. Solid State Phenomena, 192-193, 527-532. doi:10.4028/www.scientific.net/SSP.192-193.527 Peer reviewed |
| Tchuindjang, J. T., & Lecomte-Beckers, J. (2012). Analyses métallographiques et fractographiques sur une soupape de moteur thermique rompue. |
| Montrieux, H.-M., Mertens, A., & Lecomte-Beckers, J. (2012). Développement d’une ailette d’obus en composite magnésium renforcé de fibres de carbone. Région Wallonne. |
Mertens, A., Montrieux, H.-M., Lecomte-Beckers, J., Simar, A., Delannay, F., Maire, E., & Adrien, J. (12 November 2012). Influence of Fiber Distribution and Grain Size on the Mechanical Behavior of Friction Stir Processed Mg-C Composites [Paper presentation]. 1st Fall Meeting, IAP 7/21, Intemate Multiscale Mechanics of Interface Dominated Material, La Roche-En-Ardenne, Belgium. |
| Tchuindjang, J. T., Paydas, H., & Lecomte-Beckers, J. (2012). Rapport des analyses chimiques et métallographiques comparatives d’une tôle brute et d’une plaque usinée. |
Simar, A., de Meester, B., Delannay, F., Mertens, A., Lecomte-Beckers, J., Avettand-Fenoel, M.-N., Shabadi, R., Taillard, R., Maire, E., & Adrien, J. (29 October 2012). Composite Manufacturing by Friction Stir Processing [Paper presentation]. Journées d’Automne, Paris, France. Peer reviewed |
 | Mertens, A., Guzmán Inostroza, C. F., Habraken, A., Behera, A. K., Duflou, J., & Lecomte-Beckers, J. (September 2012). Experimental Characterisation of Damage Occuring during Single Point Incremental Forming of a Ferritic Steel [Poster presentation]. Hardening and Damage of Materials uder Finite Deformations : Constitutive Modeling and Numerical Implementation, Dortmund, Germany. |
| Tchuindjang, J. T., Paydas, H., & Lecomte-Beckers, J. (2012). Rapport des analyses fractographiques sur une plaque-support d’un convoyeur en aluminium 5083 fissurée, et analyses métallographiques et non-destructives sur plaque-support en 6082 impactée. |
 | Mertens, A., Simar, A., Montrieux, H.-M., Halleux, J., Delannay, F., & Lecomte-Beckers, J. (2012). Friction Stir Processing of Magnesium Matrix Composites reinforced with Carbon Fibres: Influence of the Matrix Characteristics and of the Processing Parameters on Microstructural Developments. In K. U. K. W.J.Poole (Ed.), Proceedings of the 9th International Conference On Magnesium Alloys and their Apllications. Peer reviewed |
 | Mertens, A., Montrieux, H.-M., Lecomte-Beckers, J., Simar, A., Delannay, F., & Halleux, J. (05 July 2012). Production of Mg-matrix composites with C fibres reinforcement : liquid - vs solid - state processing routes [Paper presentation]. Seminaire hebdomadaire, Hamilton (ON), Canada. |
 | Fernandez, C., Flores, P., Montrieux, H.-M., & Lecomte-Beckers, J. (2012). Influence of the addition of functionalized MWCNT on mechanical properties on epoxy/carbon fiber and epoxy/carbon-aramid fiber composites. In Proceedings of the 1st Brazilian Conference on Composite Materials. Peer reviewed |
 | Mertens, A., Montrieux, H.-M., Halleux, J., Lecomte-Beckers, J., & Delannay, F. (25 May 2012). Processing of Carbon Fibers Reinforced Mg Matrix Composites Via Pre-infiltration with Al. Journal of Materials Engineering and Performance, 21 (5), 701-706. doi:10.1007/s11665-012-0177-4 Peer Reviewed verified by ORBi |
| Tchuindjang, J. T., Paydas, H., & Lecomte-Beckers, J. (2012). Rapport des analyses métallographiques et fractographiques sur plaque de convoyeur fissurée en alliage d'aluminium 5083. |
| Paydas, H., Tchuindjang, J. T., & Lecomte-Beckers, J. (2012). Synthèse bibliographique sur les propriétés mécaniques des alliages d'aluminium 5083,6082 et 7075. |
 | Mertens, A., Contrepois, Q., Dormal, T., Lemaire, O., & Lecomte-Beckers, J. (2012). Ti alloys processed by selective laser melting and by laser cladding: microstructures and mechanical properties. In proceedings of 12th EUROPEAN CONFERENCE ON SPACECRAFT STRUCTURES, MATERIALS & ENVIRONMENTAL TESTING, Noordwijk 20-23 mars 2012. Noordwijk, Netherlands: ESA communications. Peer reviewed |
 | Lecomte-Beckers, J., Sinnaeve, M., & Tchuindjang, J. T. (2012). Current Developments of Alloyed Steels for Hot Strip Roughing Mills : Characterization of High-Chromium Steel and Semi-High Speed Steel. Iron and Steel Technology, 33-40. Peer Reviewed verified by ORBi |
 | Simar, A., Mertens, A., Montrieux, H.-M., Lecomte-Beckers, J., Halleux, J., & Delannay, F. (26 January 2012). Microstructure and mechanical properties of stir processed magnesium matrix composites reinforced with carbon fibres [Paper presentation]. The 2nd International Conference on Friction Stir Welding and Processing (FSWP'2012), Saint-Etienne, France. Peer reviewed |
| Tchuindjang, J. T., Paydas, H., & Lecomte-Beckers, J. (2012). Rapport des analyses chimiques et métallographiques sur une manchette perforée après soudure sur un coude. |
 | Verlee, B., Dormal, T., & Lecomte-Beckers, J. (2012). Density and porosity control of sintered 316L stainless steel parts produced by additive manufacturing. Powder Metallurgy, 55 (4), 260-267. doi:10.1179/0032589912Z.00000000082 Peer Reviewed verified by ORBi |
 | Lecomte-Beckers, J., Sinnaeve, M., & Tchuindjang, J. T. (2011). Comparison between High Chromium Steel and Semi HSS used in Hot Strip Mill Roughing Stands. In Proceedings of the 13th Southern African Roll Users Conference (SARUC 2011) (pp. 35-40). Witbank, South Africa: SARUC. Peer reviewed |
| Tchuindjang, J. T., Paydas, H., & Lecomte-Beckers, J. (2011). Rapport des analyses chimiques et métallographiques sur une tuyauterie en inox perforée. |
 | Contrepois, Q., & Lecomte-Beckers, J. (12 September 2011). Rapidly solidified microstructure of 3D parts fabricated by selective laser melting (SLM) - Examples of stainless steel 316L and titanium Ti-6Al-4V [Poster presentation]. European congress and exhibition on advanced materials and processes, Montpellier, France. |
 | Montrieux, H.-M., Mertens, A., Halleux, J., Delannay, F., & Lecomte-Beckers, J. (September 2011). Interfacial phenomena in carbon fibre reinforced magnesium alloys processed by squeeze casting and thixomolding [Paper presentation]. Euromat 2011: European Congress and Exhibition on Advanced Materials and Processes, Montpellier, France. Peer reviewed |
 | Contrepois, Q., Carton Marc, & Lecomte-Beckers, J. (September 2011). Characterization of the β Phase Decomposition in Ti-5Al-5Mo-5V-3Cr at Slow Heating Rates. Open Journal of Metal, 1. Peer reviewed |
| Mertens, A., Lecomte-Beckers, J., Montrieux, H.-M., Halleux, J., & Delannay, F. (September 2011). Processing of carbon fibers reinforced Mg matrix composites via pre-infiltration with Al [Paper presentation]. Euromat 2011, European congress and exhibition on advanced materials and processes, Montpellier, France. Peer reviewed |
 | Tchuindjang, J. T., Sinnaeve, M., & Lecomte-Beckers, J. (September 2011). Enhancement of in-situ Transformation of M2C Eutectics Carbides during High Temperature Heat Treatment on a HSS and a Semi-HSS Grades [Poster presentation]. European congress and exhibition on advanced materials and processes, EUROMAT 2011, Montpellier, France. |
 | Lecomte-Beckers, J., & Tchuindjang, J. T. (Eds.). (2011). Proceedings of the international conference Abrasion 2011 (Abrasion Wear Resistant Alloyed White Cast Irons For Rolling and Pulverizing Mills), 4th Edition. Liège, Belgium: ULg-Service MMS. |
 | Tchuindjang, J. T., Sinnaeve, M., & Lecomte-Beckers, J. (2011). Influence of High Temperature Heat Treatment on in situ Transformation of Mo-rich Eutectic Carbides in HSS and Semi-HSS Grades. In J. Lecomte-Beckers & J. T. Tchuindjang (Eds.), Conference Proceedings of Abrasion 2011 (pp. 61-75). Liège, Belgium: MMS-ULg. Peer reviewed |
| Tchuindjang, J. T., Paydas, H., & Lecomte-Beckers, J. (2011). Rapport des analyses fractographiques sur une tôle de citerne à mazout fissurée. |
 | Lecomte-Beckers, J., & Tchuindjang, J. T. (30 June 2011). Study of the origin of the unexpected pearlite during the cooling stage of two cast high-speed steels. Solid State Phenomena, 172-174, 803-808. doi:10.4028/www.scientific.net/SSP.172-174.803 Peer reviewed |
 | Verlee, B., Dormal, T., & Lecomte-Beckers, J. (2011). MANUFACTURING OF POROUS PARTS IN 316L STAINLESS STEEL BY 3D-PRINTING: SOME INDUSTRIAL CASE STUDIES. In Proceedings of AEPR’11, 16th European Forum on Rapid Prototyping and Manufacturing (Publibook, edited by Editions Ecole Centrale de Nantes). France: Ecole Centrale de Nantes. Peer reviewed |
 | Verlee, B., Dormal, T., & Lecomte-Beckers, J. (24 May 2011). Les matériaux intelligents: pièces à porosité contrôlée en acier inoxydable fabriquées par rapidprototyping [Paper presentation]. Séminaire départemental, Liège, Belgium. |
 | Noble, P., Lumay, G., Coninx, M., Collin, B., Magnée, A., Lecomte-Beckers, J., Denoix, J.-M., & Serteyn, D. (May 2011). A pendulum test as a tool to evaluate viscous friction parameters in the equine fetlock joint. Veterinary Journal, 188 (2), 204-209. doi:10.1016/j.tvjl.2010.03.016 Peer Reviewed verified by ORBi |
| Paydas, H., Dedry, O., Montrieux, H.-M., & Lecomte-Beckers, J. (2011). Literature review about electrical contacts. |
Paydas, H., & Lecomte-Beckers, J. (2011). Etude bibliographique concernant les phases de type martensite et Widmanstatten dans les alliages de Titane (Ti6Al4V). |
| Tchuindjang, J. T., Paydas, H., & Lecomte-Beckers, J. (2011). Rapport des analyses chimiques, métallographiques et fractographiques sur un tube coudé en titane rompu. |
 | Tchuindjang, J. T., & Lecomte-Beckers, J. (2011). Equilibrium and non Equilibrium study of the Fine Pearlite Formation in two Cast High Speed Steels after solidification and thermal treatment. International Journal of Materials Research. Peer reviewed |
 | Keller, C., Schwartz, R., Bobadilla, M., Tchuindjang, J. T., Lecomte-Beckers, J., & Habraken, A. (2011). Towards the Prediction of Damage Of Peritectic Steels During Continuous Casting Process. AIP Conference Proceedings, 1353, 151-156. doi:10.1063/1.3589507 Peer Reviewed verified by ORBi |
 | Lecomte-Beckers, J., Sinnaeve, M., & Tchuindjang, J. T. (2011). New Trends in Hot Strip Mill Roughing Mills: Characterization of High Chromium Steel and Semi-HSS Grades. In Proceedings of the Iron & Steel Technology Conference (AISTech 2011) (pp. 1771-1782). Peer reviewed |
 | Lecomte-Beckers, J., Tchuindjang, J. T., Sinnaeve, M., & Ernst, R. (2010). RECENT TRENDS IN HOT STRIP ROUGHING MILLS: HIGH CHROMIUM STEEL VERSUS SEMI-HSS. In Procceedings of the 47th Rolling Seminar - Processes, Rolled and Coated Products (pp. 689-702). Peer reviewed |
 | Rassili, A., Pierret, J.-C., Vaneetveld, G., Halleux, J., Walmag, G., & Lecomte-Beckers, J. (September 2010). X38CrMoV5 hot-work tool steel as tool material for thixoforging of steel, numerical and experimental evaluation. Transactions of Nonferrous Metals Society of China, 20 (Special 3), 713-718. doi:10.1016/S1003-6326(10)60568-7 Peer reviewed |
 | Pierret, J.-C., Rassili, A., Vaneetveld, G., & Lecomte-Beckers, J. (September 2010). Stability of steel thixoforging process. Transactions of Nonferrous Metals Society of China, 20 (Special 3), 937-942. doi:10.1016/S1003-6326(10)60610-3 Peer reviewed |
 | Vaneetveld, G., Rassili, A., Pierret, J.-C., & Lecomte-Beckers, J. (September 2010). Conception of tooling adapted to the thixoforging of high solid fraction hot-crack-sensitive aluminium alloys. Transactions of Nonferrous Metals Society of China, 20 (9), 1712-1718. doi:10.1016/S1003-6326(09)60363-0 Peer reviewed |
| Tchuindjang, J. T., & Lecomte-Beckers, J. (2010). Comparison between a high chromium steel and a semi HSS grades used as work rolls in the roughing stands of a hot strip mill. In Proceedings of The 10th International Conference on Steel Rolling (10th ICSR) (pp. 1771-1781). Beijing, China: The chinese society for metals. Peer reviewed |
| Tchuindjang, J. T., & Lecomte-Beckers, J. (2010). Rapport des analyses chimiques et MEB sur des échantillons de tuyauteries en inox corrodées. |
 | Verlee, B., Dormal, T., & Lecomte-Beckers, J. (15 June 2010). Contrôle de la porosité résiduelle dans les pièces en acier inoxydable fabriquées par rapid manufacturing selon la technologie 3D printing [Paper presentation]. Assises Européennes du Prototypage Rapide 2010, Paris, France. |
Paydas, H., Tchuindjang, J. T., & Lecomte-Beckers, J. (2010). Examen métallographique sur des échantillons en alliage Ti-6Al-4V soudés par friction. (Convention Blisk RW 6247). |
| Noble, P., Lumay, G., Coninx, M., Collin, B., Lecomte-Beckers, J., Denoix, J.-M., & Serteyn, D. (April 2010). A pendulum test as a tool to evaluate viscous friction parameters in the equine fetlock joint. |
 | Noble, P., Collin, B., Lecomte-Beckers, J., Magnée, A., Denoix, J. M., & Serteyn, D. (2010). An equine joint friction test model using a cartilage-on-cartilage arrangement. Veterinary Journal. doi:10.1016/j.tvjl.2008.12.003 Peer Reviewed verified by ORBi |
| Noble, P., Collin, B., Lecomte-Beckers, J., Magnée, A., Denoix, J.-M., & Serteyn, D. (2010). L'articulation synoviale : un systeme tribologique parfait. Annales de Médecine Vétérinaire, 154 (2), 83-93. Peer Reviewed verified by ORBi |
Giraud, E., & Lecomte-Beckers, J. (2010). Fabrication de feuilles métalliques minces ou multicouches par pulvérisation assistée par plasma et canon à électrons. (Rapport scientifique et technique final, Période du 01/06/2007 au 31/10/2010, Projet EBEAMFOIL, Convention RW n° 71/6697, Partenariat Public Privé (PPP)). |
 | Montrieux, H.-M., & Lecomte-Beckers, J. (2010). Fissuration de dépôts durs à base de Ni et de Co en Laser Cladding. |
 | Vaneetveld, G., Rassili, A., Lecomte-Beckers, J., & Atkinson, H. V. (2010). Electron backscattered diffraction of aluminium alloy 7075 samples after heat treatment. International Journal of Material Forming, 777-780. doi:10.1007/s12289-009-0623-5 Peer Reviewed verified by ORBi |
 | Vaneetveld, G., Rassili, A., Pierret, J.-C., & Lecomte-Beckers, J. (2010). Benefits of thixoforging hot-crack-sensitive aluminium alloys at high solid fraction. International Journal of Material Forming, 2, 777-780. doi:10.1007/s12289-010-0887-9 Peer Reviewed verified by ORBi |
Rassili, A., Robelet, M., & Lecomte-Beckers, J. (2010). Identification of Suitable Steels : Chapter 3. In A. Rassili & H. Atkinson (Eds.), Thixoforming steels (pp. 37-65). Shaker Verlag Publications. |
Lecomte-Beckers, J., Contrepois, Q., Kuhn, F., & beck, T. (2010). Materials for advanced power engineering 2010 : Proceedings of the 9th Liège conference. Julich, Germany: Schriften des Forschungszentrum Julich, Reihe energietechnik/Energy Technology Forschungszentrum Julich. |
 | Pierret, J.-C., Rassili, A., Vaneetveld, G., Bigot, R., & Lecomte-Beckers, J. (2010). Friction coefficients evaluation for steel thixoforging. In Proceedings of The 13th Esaform Conference on Material Forming (2010) - semi-solid processing. Peer reviewed |
Contrepois, Q., & Lecomte-Beckers, J. (2009). Caractérisation thermique des alliages 2014-T6 et 6061-T6. (Projet Stirhetal RW N° 0716690). |
Tchuindjang, J. T., & Lecomte-Beckers, J. (2009). Etude comparative de la cinétique de solidification à l'équilibre et hors-équilibre de deux nuances d'un alliage pour cylindre de travail dégrossisseur à chaud. (Rapport - Final Convention RW 5359). |
Tchuindjang, J. T., & Lecomte-Beckers, J. (2009). Essais en analyse thermique différentielle sur l'enveloppe d'un cylindre de travail dégrossisseur à chaud. (Projet CENCYLAM). |
 | Montrieux, H.-M., & Lecomte-Beckers, J. (06 November 2009). Study of Carbon Fibre-Reinforced Magnesium Composites (Introduction to interfacial phenomenon) [Paper presentation]. 2e journée des doctorants MAIN : Matériaux nouveaux pour le futur, Louvain-la-Neuve, Belgium. |
Carton, M., & Lecomte-Beckers, J. (2009). Rapport d'essais réalisés sur une pièce hybride composée de la nuance d'aluminium 5183 et de l'acier A516655. (Projet Feder 2007-2013, Sinus). |
Carton, M., & Lecomte-Beckers, J. (2009). Rapport d'essais réalisés sur des matériaux de coeur de coulée n°34898 TOV B et 33878-1 de chez MK. (Projet Soubiro - Convention n°816779). |
Carton, M., & Lecomte-Beckers, J. (2009). Développement des performances du Ti-555 pour l'allégement des turbo-réacteurs. (Rapport final - Projet RW Titaero - Convention n°415944). |
| Noble, P., Collin, B., Lecomte-Beckers, J., Magnée, A., Denoix, J.-M., & Serteyn, D. (01 April 2009). An equine joint friction test model using a cartilage-on-cartilage arrangement [Poster presentation]. Biomedica 2009, Liège, Belgium. |
Brassine, C., & Lecomte-Beckers, J. (2009). Modelisation de la diffusivité thermique des aciers en fonction des éléments d'alliage pour la simulation numérique du soudage par point. (Convention RW OPTYMA 061/6339 - Rapport final). |
 | Montrieux, H.-M., & Lecomte-Beckers, J. (2009). Dépôt Laser de poudre à base Fe-C-Mn-Cr et WC/W2C. |
 | Verlee, B., Dormal, T., Clarinval, A.-M., & Lecomte-Beckers, J. (25 February 2009). Rapid prototyping [Paper presentation]. European Training Action on Ceramic Nanocomposites, Madrid, Spain. |
Lecomte-Beckers, J. (2009). Physique des matériaux : partim 2 polymères. |
 | Pierret, J.-C., Rassili, A., Vaneetveld, G., Walmag, G., & Lecomte-Beckers, J. (2009). Influence of the chemical composition on the thixoformability of steels. International Journal of Material Forming, 765-768. doi:10.1007/s12289-009-0597-3 Peer Reviewed verified by ORBi |
 | Lecomte-Beckers, J., & Tchuindjang, J. T. (2009). Structural investigation of solidification and heat treatments influence on High Alloyed Cast Irons Grades with Nb-V-Ti Additions. Defects and diffusion forum, 289-292, 77-86. doi:10.4028/www.scientific.net/DDF.289-292.77 Peer reviewed |
Montrieux, H.-M., Tchuindjang, J. T., & Lecomte-Beckers, J. (2008). Etude de dépôts en alliage Nickel - Diamants fabriqués par Laser Cladding. (Rapport de recherche LaserCo - Rapport Final). |
Montrieux, H.-M., Tchuindjang, J. T., & Lecomte-Beckers, J. (2008). Recherche sur la frittabilité de l'Inconel 718. (Rapport de recherche Metal Inject - Rapport Final). |
Pace, S., & Lecomte-Beckers, J. (2008). Fabrication de feuilles minces métalliques par dépôt sous vide. (Rapport final seconde prolongation, RW, First spin-off, Convention 415810). |
Pace, S., & Lecomte-Beckers, J. (2008). Fabrication de feuilles minces métalliques par dépôt sous vide. (Rapport final fin deuxième prolongation, RW, First spin-off EVAFOIL, Convention 415810). |
 | Vaneetveld, G., Rassili, A., Pierret, J.-C., & Lecomte-Beckers, J. (July 2008). Improvement in Thixoforging of 7075 Aluminium Alloys at High Solid Fraction. Solid State Phenomena, 141-143, 689-694. doi:10.4028/www.scientific.net/SSP.141-143.707 Peer reviewed |
 | Fraipont, C., & Lecomte-Beckers, J. (July 2008). Alloy Characterization to Adapt Steels to Thixoforming: Study of a High Chromium High Carbon Steel. Solid State Phenomena, 141-143, 523-527. doi:10.4028/www.scientific.net/SSP.141-143.523 Peer reviewed |
Pace, S., & Lecomte-Beckers, J. (2008). Fabrication de feuilles métalliques minces ou multicouches par pulvérisation assistée par plasma et canon à électrons. (Rapport d'activité détaillé annuel - Partenariat Public Privé (PPP), RW, Convention EBEAMFOIL). |
 | Fraipont, C., & Lecomte-Beckers, J. (April 2008). Influence of Alloying Elements on the Thixoformability of a Chromium Steel. International Journal of Material Forming, 1 (1), 997-1000. doi:10.1007/s12289-008-0226-6 Peer Reviewed verified by ORBi |
Carton, M., & Lecomte-Beckers, J. (2008). Détermination des paramètres thermophysiques des nuances AK204, AK211, AK328, AK586, AL990, H2152, J0303, AL351, AL957, AM296, AM1052-A, AM1052-B. Soudabilité. (Recherche ARSA - Rapport Final). |
 | Vaneetveld, G., Rassili, A., Pierret, J.-C., & Lecomte-Beckers, J. (January 2008). Extrusion tests of 7075 aluminium alloy at high solid fraction. International Journal of Material Forming, 1 (1), 1019-1022. doi:10.1007/s12289-008-0231-9 Peer Reviewed verified by ORBi |
 | Tchuindjang, J. T., & Lecomte-Beckers, J. (2008). Investigation on retained delta ferrite occurrence and its influence on HSS and Semi HSS Strengthening after thermomecanical routes. In Proceedings of Abrasion 2008 (pp. 115-127). Italy: Edito M. Pellizzari. Peer reviewed |
Lecomte-Beckers, J. (2008). Sélection des matériaux. |
 | Pierret, J.-C., Rassili, A., Vaneetveld, G., Lecomte-Beckers, J., & Bigot, R. (2008). Robustness of a thixoforming production line. Solid State Phenomena, 141-143, 207-212. doi:10.4028/www.scientific.net/SSP.141-143.207 Peer reviewed |
 | Pierret, J.-C., Rassili, A., Vaneetveld, G., Lecomte-Beckers, J., Cezard, P., & Bigot, R. (January 2008). Steel thixoforming, influence of forming parameters on the microstructure. International Journal of Material Forming, 1 (1), 1011-1014. doi:10.1007/s12289-008-0229-3 Peer Reviewed verified by ORBi |
 | Vaneetveld, G., Clarinval, A. M., Dormal, T., Noben, J. C., & Lecomte-Beckers, J. (2008). Optimization of the formulation and post-treatment of stainless steel for rapid manufacturing. Journal of Materials Processing Technology, 196 (1-3), 160-164. doi:10.1016/j.jmatprotec.2007.05.017 Peer Reviewed verified by ORBi |
Lecomte-Beckers, J. (2008). Physique des matériaux : partim 1 métal. |
Lecomte-Beckers, J. (2008). Ingénierie des matériaux métalliques: Solidification des métaux et alliages - Traitement thermique. |
 | Tchuindjang, J. T., Terziev, L., Sinnaeve, M., Mukadi Kantabilenga, G., & Lecomte-Beckers, J. (16 November 2007). ASSESSMENT OF RETAINED AUSTENITIC PHASE IN INDEFINITE CHILL CAST IRON MICROSTRUCTURE TOWARDS VARIOUS TECHNIQUES [Poster presentation]. Congrès annuel de la société belge de microscopie (SBM), Liège, Belgium. |
Brassine, C., & Lecomte-Beckers, J. (2007). Caractérisation mécanique des matériaux obtenus par les procédés MIM "Quickset" et "Cold Flow", ainsi que par forgeage. (Rapport de recherche Metal Inject). |
Pace, S., & Lecomte-Beckers, J. (2007). Fabrication de feuilles minces métalliques par dépôt sous vide. (Rapport final fin première prolongation, RW, First spin-off, Convention 415810). |
Brassine, C., & Lecomte-Beckers, J. (2007). Caractérisation mécanique comparative des matériaux obtenus par les procédés MIM. (Rapport Final Metal Inject). |
 | Rassili, A., Vaneetveld, G., Pierret, J.-C., & Lecomte-Beckers, J. (14 June 2007). THIXOFORMAGE DES METAUX: Mise en forme rapide de pièces fonctionelles “near-net-shape” à design complexe dignes du forgeage! [Poster presentation]. Pôle Mécatech: rencontres entreprises-laboratoires, Louvain-la-Neuve, Belgium. |
Carton, M., & Lecomte-Beckers, J. (2007). Détermination des paramètres thermophysiques de 12 nuances de chez ARSA. (Rapport Final, Convention ARSA). |
 | Ernst, R., Breyer, J.-P., Tchuindjang, J. T., & Lecomte-Beckers, J. (2007). Improvement in HSS grade for early stands of hot strip mills - Metallurgical features and mechanical properties assessment. In Proceedings of the 43rd Seminar of Rollings. Peer reviewed |
 | Tchuindjang, J. T., & Lecomte-Beckers, J. (2007). Fractography survey on high cycle fatigue failure: Crack origin characterisation and correlations between mechanical tests and microstructure in Fe-C-Cr-Mo-X alloys. International Journal of Fatigue, 29 (4), 713-728. doi:10.1016/j.ijfatigue.2006.06.012 Peer Reviewed verified by ORBi |
 | Fraipont, C., & Lecomte-Beckers, J. (2007). Determination of the Influence of Alloying Elements on Solidification Parameters for the Study of the Thixoformability of a Chromium Steel. In Proceedings of The 10th Esaform Conference on Material Forming (pp. 1113-1117). Peer reviewed |
 | Carton, M., Pascal, J., Clement, N., & Lecomte-Beckers, J. (2007). Study of transformations and microstructural modification in Ti-LCB and T-555 alloys using Differential Scanning Calorimetry. In Proceedings of Ti-2007 Science and technology - 11th World Conference on Titanium (JIMIC 5) (pp. 491-494). Peer reviewed |
 | Martinez, L., Gomez, C., Lecomte-Beckers, J., & Perez, F. J. (2007). Corrosion studies of different ferrous alloys for rolling cylinders. Materials and Design, 28 (1), 196-202. doi:10.1016/j.matdes.2005.04.016 Peer Reviewed verified by ORBi |
 | Habraken, A., Bouffioux, C., Carton, M., & Lecomte-Beckers, J. (2007). Study of a 2024 aluminium rod produced by Rotary Forging. Journal of Materials Processing Technology, 184, 19-26. doi:10.1016/j.jmatprotec.2006.10.044 Peer Reviewed verified by ORBi |
 | Lecomte-Beckers, J., Delaunois, F., Breyer, J.-P., & Tchuindjang, J. T. (2007). Metallurgical assessment of two HSS rolls grades for Hot Strip Mill. In AISTech-Proceedings of the Iron and Steel Technology Conference. Peer reviewed |
 | Lecomte-Beckers, J., & Carton, M. (2007). Tailoring microstructures to improve thermomechanical behaviour of metallic alloys : Ti alloys for Aerospace applications. In Proceedings of international workshop : Advancements in design optimization of materials, structures and mechanical systems (pp. 74-82). |
Pace, S., & Lecomte-Beckers, J. (2006). Fabrication de feuilles minces métalliques par dépôt sous vide. (Rapport scientifique et technique fianl premier mandat, RW, First spin-off, Convention 415810). |
Lecomte-Beckers, J., Brassine, C., Lebrun, J., Ngendakumana, P., Dular, P., Rassili, A., & Wathieu, P. (2006). Etude et faisabilité d'un générateur magnéthothermique, avec dispositif expérimental. Phase 2 : Expérimentation. (Rapport Final, RW, Convention 550086 GEMMAG). |
Carton, M., & Lecomte-Beckers, J. (2006). Influence d'une couche de zinc sur les propriétés thermophysiques. (Rapport Final, RW, Convention ARSA). |
Lecomte-Beckers, J., & Herman, M. (2006). Cinétique des changements de phase - Application à l'étude de la cinétique de précipitation dans des alliages fortement alliés au chrome. (Marichal Ketin, First Europe objectif 3, Convention EPH3310300R074F/415822, Projet "Phakir" - Rapport scientifique et technique n°3 - Rapport Final). |
Lecomte-Beckers, J., & Herman, M. (2006). Cinétique des changements de phase - Application à l'étude de la cinétique de précipitation dans des alliages fortement alliés au chrome. (Marichal Ketin, First Europe objectif 3, Convention EPH3310300R074F/415822, Projet "Phakir" - Rapport d'activité n°3 - Rapport Final). |
 | Lecomte-Beckers, J., Herman, M., & Breyer, J. P. (2006). Influence of excessive carbides upon strength of hot rolled rolls of steel similar to high speed grade. Stalʹ, 9, 87-92. Peer reviewed |
 | Lecomte-Beckers, J., Rassili, A., Robelet, M., Poncin, C., & Koeune, R. (2006). Determination of solidification parameters used for the prediction of the thixoformability of several steel alloys. Solid State Phenomena, 116-117, 54-57. doi:10.4028/www.scientific.net/SSP.116-117.54 Peer reviewed |
 | Simar, A., Lecomte-Beckers, J., Pardoen, T., & de Meester, B. (2006). Effect of boundary conditions and heat source distribution on temperature distribution in friction stir welding. Science and Technology of Welding and Joining, 11 (2), 170-177. doi:10.1179/174329306X84409 Peer Reviewed verified by ORBi |
 | Lecomte-Beckers, J., Moureaux, P., Carton, M., & Habraken, A. (2006). Characterization of Duplex steel Uranus 76N during deformation and heat treatment. Physica Status Solidi A. Applications and Materials Science, 203 (15), 3651-3664. doi:10.1002/pssa.200621200 Peer Reviewed verified by ORBi |
 | Fraipont, C., Puettgen, W., Bleck, W., & Lecomte-Beckers, J. (2006). Influence of experimental parameters on properties and microstructure of the steel X210CrW12 in the semi-solid state. Solid State Phenomena, 116-117, 209-212. doi:10.4028/www.scientific.net/SSP.116-117.209 Peer reviewed |
Lecomte-Beckers, J., & Wathieu P. (2006). Procédé et dispositif de production d'énergie en présence de circuit magnétique (page17). |
Tchuindjang, J. T., & Lecomte-Beckers, J. (2006). Dimensionnement de chariots d'amortisseurs et choix d'accessoires pour machine d'impact. (Rapport du laboratoire MMS, Actions de Recherche Concertée (ARC) - Communauté Française, MacroMousses). |
 | Herman, M., Breyer, J. P., & Lecomte-Beckers, J. (2006). Influence of carbide precipitation on hot hardness of high speed steel rolls. In Proceedings of the Southern African Roll Users' Conference (SARUC) (pp. 28-33). Peer reviewed |
Lecomte-Beckers, J., Carton, M., Schubert, F., & Ennis, P. J. (2006). Materials for advanced power engineering 2006 : Proceedings of the 8th Liège conference. Julich, Germany: Schriften des Forschungszentrum Julich, Reihe energietechnik/Energy Technology Forschungszentrum Julich. |
 | Perez, F. J., Martinez, L., Hierro, M. P., Gomez, C., Portela, A. L., Pucci, G. N., Duday, D., Lecomte-Beckers, J., & Greday, Y. (2006). Corrosion behaviour of different hot rolled steels. Corrosion Science, 48 (2), 472-480. doi:10.1016/j.corsci.2005.01.001 Peer Reviewed verified by ORBi |
 | Vaneetveld, G., Rassili, A., Lecomte-Beckers, J., & Atkinson, H. V. (2006). Thixoforging of 7075 aluminium alloys at high solid fraction. Solid State Phenomena, 116-117, 762-765. doi:10.4028/www.scientific.net/SSP.116-117.762 Peer reviewed |
Lecomte-Beckers, J., Brassine, C., Lebrun, J., Ngendakumana, P., Dular, P., Rassili, A., & Wathieu, P. (2005). Etude et faisabilité d'un générateur magnéthothermique, avec dispositif expérimental. Phase 1 : Etude et faisabilité. (Rapport Final, RW, Convention 550086 GEMMAG). |
Lecomte-Beckers, J., & Herman, M. (2005). Deliverable N° 3 - Self Assessment Report (BNEN) : Studiecentrum voor Kernenergie - Centre d'Etude de l'Energie Nucléaire. (Rapport final). |
Carton, M., & Lecomte-Beckers, J. (2005). Mesures de diffusivité thermique sur 9 tôles de chez OCAS. (Rapport Final - Convention OCAS). |
Carton, M., & Lecomte-Beckers, J. (2005). Mesures de diffusivité thermique sur des tôles avec différentes épaisseurs de vernis. (Rapport Final - Convention OCAS). |
Cescotto, S., Carton, M., & Lecomte-Beckers, J. (2005). Metallographic analyses and Hardness results. (Projet U-rail, Intermediate Report). |
Lecomte-Beckers, J. (May 2005). thermal conductivity and microstructure. |
Carton, M., & Lecomte-Beckers, J. (2005). Study of liquid fraction of semi-solids steels for thixoforming. (Rapport Final - Ascometal - Convention THIXO). |
 | Bouffioux, C., Carton, M., Lecomte-Beckers, J., & Habraken, A. (2005). Determination of the optimal forging conditions of a Cr-Mo-V high alloy steel through a microstructural, thermophysical and mechanical study. In D. Banabic, Proceedings of the 8th ESAFORM Conference on Material Forming (Vol. 1) (pp. 45-48). Cluj Napoca, Romania: The publishing House of the Romanian Academy. Peer reviewed |
Lecomte-Beckers, J., & Herman, M. (2005). Cinétique des changements de phase - Application à l'étude de la cinétique de changement de phases par traitement thermique dans les alliages de fonderie pour cylindres de laminoirs type ICDP. (Marichal Ketin, Commission mixte Communauté Française de Belgique - RW - DGRI - DRE, Convention RW-DGRI-DRE-Bulgarie, Rapport d'activités 2004 - Rapport Final). |
Lecomte-Beckers, J., & Herman, M. (2005). Cinétique des changements de phase - Application à l'étude de la cinétique de changement de phases par traitement thermique dans les alliages de fonderie pour cylindres de laminoirs type ICDP. (Marichal Ketin, Commission mixte Communauté Française de Belgique - RW - DGRI - DRE, Convention RW-DGRI-DRE-Bulgarie, Rapport d'activités 2005 - Rapport Final). |
Tchuindjang, J. T., & Lecomte-Beckers, J. (2005). Etude d'adhésifs et dimensionnement d'une rampe de lancement pour machine d'impact. (Annexe du laboratoire MMS au rapport annuel, Actions de Recherche Concertée (ARC) - Communauté Française, MacroMousses). |
Carton, M., & Lecomte-Beckers, J. (2005). Caractérisation des tôles M00, M21 et M31 par détermination de la chaleur spécifique et de la diffusivité thermique. (Rapport Final - Convention OCAS). |
 | Lecomte-Beckers, J., Rassili, A., Carton, M., & Robelet, M. (2005). Study of liquid fraction evolution of semi-solid steels for thixoforming. In Proceedings of the 8th ESAFORM Conference on Material Forming (pp. 1087-1090). Peer reviewed |
 | Lecomte-Beckers, J., Rassili, A., Carton, M., Robelet, M., & Koeune, R. (2005). Study of the liquid fraction and thermophysical properties of semi-solid steels and application to the simulation of inductive heating for thixoforming. In D. Bananic, Advanced Methods in Material Forming (pp. 321-347). Berlin, Germany: Springer Berlin Heidelberg. doi:10.1007/3-540-69845-0_20 |
 | Guérard, S., Gyselinck, J., & Lecomte-Beckers, J. (2005). Finit element modelling of an asynchronous motor with one broken rotor bar, comparison with the data recorded on a prototype and material aspects. Bulletin Scientifique de l'AIM (Association des Ingénieurs Electriciens sortis de l'Institut Electrotechnique Montefiore), 1, 13-22. |
 | Lecomte-Beckers, J., & Tchuindjang, J. T. (2005). Use of Microscopy for identification of complex MC, M2C, M6C, M7C3 and M23C6 carbides in high speed-steels. Imaging and Microscopy, 2, 48-49. Peer Reviewed verified by ORBi |
Lecomte-Beckers, J., & Tchuindjang, J. T. (2004). Effet des inclusions et des carbures dans des aciers et fontes fortement alliés, soumis à des sollicitations mécaniques sévères. (Rapport Final - Convention RW 114877 INCA). |
Lecomte-Beckers, J. (June 2004). Titanium alloys. |
Lecomte-Beckers, J., Bouffioux, C., Carton, M., & Habraken, A. (2004). Caractérisation rationnelle des propriétés à chaud des matériaux métalliques. (Rapport Final - Convention RW 981/3793). |
 | Lecomte-Beckers, J., Rassili, A., Carton, M., & Robelet, M. (2004). Characterisation of thermophysical properties of semi-solid steels for thixoforming. In Proceedings of the 8th International Conference on Semi-Solid Processing of Alloys and Composites (S2P). Peer reviewed |
 | Bouffioux, C., Carton, M., Lecomte-Beckers, J., & Habraken, A. (2004). Study of the cooling process of an extruded aluminium profile. In S. Gosh, J. M. Castro, ... J. K. Lee, Proceedings of Materials Processing and Design: Modeling, Simulation and Applications (NUMIFORM 2004) (pp. 1022-1027). American Institute of Physics AIP Conference Proceedings. Peer reviewed |
 | Lecomte-Beckers, J., Tchuindjang, J. T., Ernst, R., & Breyer, J.-P. (2004). Structural investigations of HSS rolls for hot strip mill. In Proceedings of the 41st Rolling Seminar Processes, Rolled and Coated Product (pp. 93-102). Peer reviewed |
 | Castagne, S., Pascon, F., Lecomte-Beckers, J., & Habraken, A. (2004). Mesoscopic model of intergranular cracks in low carbon steel during cooling of continuous casting. In M. Lamberigts, Proceedings of the 2nd international conference of thermomechanical processing of steels (TMP 2004) (pp. 233-240). Liège, Belgium: Stahl Eisen. Peer reviewed |
 | Tchuindjang, J. T., & Lecomte-Beckers, J. (2004). Melting and crystallisation behaviour of multi-component Fe-C-Cr-X alloys : microstructural aspects. In Proceedings of the 13th European Microscopy Congress (pp. 651-652). Peer reviewed |
 | Pecquet, E., Volles, R., Lecomte-Beckers, J., & Habraken, A. (2004). Lingopti project: semi-continuous casting process of copper-nickel alloys. In Proceedings of the 21st International Congress of Theoritical and Applied Mechanics. Peer reviewed |
Carton, M., & Lecomte-Beckers, J. (2003). Détermination de la chaleur spécifique, de la diffusivité thermique et de la densité de tôles d'acier de chez Arcelor. (Rapport Final - Convention OCAS). |
Carton, M., & Lecomte-Beckers, J. (2003). Thermal characterisation of the modified C38. (Rapport Final - Convention THIXO). |
Lecomte-Beckers, J. (June 2003). HSS alloys. |
 | Robertz, B., Boschini, F., Rulmont, A., Cloots, R., Vandriessche, I., Hoste, S., & Lecomte-Beckers, J. (June 2003). Preparation of BaZrO3 powders by a spray-drying process. Journal of Materials Research, 18 (6), 1325-1332. doi:10.1557/JMR.2003.0182 Peer Reviewed verified by ORBi |
 | Tchuindjang, J. T., & Lecomte-Beckers, J. (2003). Study of complex carbides obtained after solidification and thermal treatment in High Speed Steels. In Proceedings des journées annuelles de la Société belge de physique SBP-BSP (27 et 28 mai 2003). |
 | Pecquet, E., Pascon, F., Lecomte-Beckers, J., & Habraken, A. (2003). Lingopti project: semi-continuous casting process of coper-nickel alloys. In E. Dick, J. Vierendeels, F. Cantrijn, G. Campion, ... C. Lacor, Proceedings of the 6th national congress on theoretical and applied mechanics. Peer reviewed |
 | Tchuindjang, J. T., & Lecomte-Beckers, J. (2003). Inclusions and Carbides characterisation in High-Speed Steels. In Proceedings de la journée de la société belge de microscopie (SBM-BVM), RUCA, UA. |
Lecomte-Beckers, J. (2003). Nuclear materials I. (Edition provisoire). |
 | Lecomte-Beckers, J., Tchuindjang, J. T., Pirard, E., & Breyer, J.-P. (2003). Development of a new high-speed steel with optimized carbide composition for mill rolls. Stalʹ, 2, 88-92. Peer reviewed |
Lecomte-Beckers, J., & Carton, M. (2002). Caractérisation thermique (liquidus-solidus) de six matériaux base zinc par ATD. (Rapport Final - Convention UMICORE). |
Lecomte-Beckers, J., & Carton, M. (2002). Etude d'aciers et de fontes au chrome. (Rapport Final - Convention GONTERMAN PEIPERS). |
Lecomte-Beckers, J., & Carton, M. (2002). Caractérisation thermophysique et métallurgique du Cupronickel. (Rapport Final - Convention UCA). |
Lecomte-Beckers, J., & Carton, M. (2002). Etude d'aciers pour thixoforgeage par calorimétrie différentielle à balayage - détermination de la fraction liquide. (Rapport Final - ASCOMETAL - Convention THIXO). |
Delheusy, M., Bley, F., Gaspard, J.-P., Lecomte-Beckers, J., Livet, F., & Simon, J. P. (2002). Competition between ordering and phase separation in a model superalloy NiCrAl. (D2AM-ESRF experiment n° 02-01-111 - Experimental Report). |
 | Tchuindjang, J. T., & Lecomte-Beckers, J. (2002). Microscopic identification of complex MC, M2C, M7C3, M6C and M23C6 carbides in high-speed steels. In Proceedings of The International Conference Joint Microscopic Meeting. Peer reviewed |
Lecomte-Beckers, J., Schubert, F., & Ennis, P. J. (2002). Materials for advanced power engineering 2002 : Proceedings of the 7th Liège conference. Julich, Germany: Schriften des Forschungszentrum Julich, Reihe energietechnik/Energy Technology Forschungszentrum Julich. |
Lecomte-Beckers, J. (January 2002). TT of high temperature alloys. |
Lecomte-Beckers, J., Tchuindjang, J. T., Cescotto, S., Pirard, E., Decolnet, L., Ghfiri, R., & Boerave, P. (2002). Relation entre la nature et la distribution des carbures et les propriétés mécaniques sur des cylindres de laminage à chaud (HSS). (Rapport Final - Convention RW 971/3651). |
Lecomte-Beckers, J., Tchuindjang, J. T., Cescotto, S., Pirard, E., Decolnet, L., Ghfiri, R., & Boerave, P. (2002). Relation entre le schéma inclusionnaire et les propriétés mécaniques sur des aciers fortement alliés. (Rapport Final - Convention RW 971/3651). |
 | Moureaux, P., Moto Mpong, S., Remy, M., Bouffioux, C., Lecomte-Beckers, J., & Habraken, A. (2002). Identification d'une loi thermo-élasto-viscoplastique en vue de la modélisation du laminage à chaud du cuivre. Journal de Physique IV, 102, 11-361-368. doi:10.1051/jp4:20020513 Peer reviewed |
 | Lecomte-Beckers, J., Tchoufang Tchuindjang, J., Pirard, E., & Breyer, J.-P. (2002). Physical metallurgy of a HSS material for hot rolling mill rolls. In Proceedings of the 14th Rolling Conference - 1st Conference on Uses of Steel (pp. 507-516). Peer reviewed |
Perez, F. J., Duday, D., Hierro, M. P., Gomez, C., Portela, A., Pucci, A. L., & Lecomte-Beckers, J. (2001). Effect of inclusions and grain boundary segregations on the oxidation-corrosion behavior of rolls alloys by electrochemical impedance spectroscop. In Proceedings of the MSMF-3 International Conference (pp. 693). Peer reviewed |
 | Tchuindjang, J. T., & Lecomte-Beckers, J. (2001). Microscopic determination of the nature of MC, M2C, M7C3 (M6C) carbides in high speed steels. In Proceedings of the Annual Meeting of the SBM (société belge de microscopie), Probing the molecular level. |
 | De Colnet, L., Pirard, E., Tchoufang Tchuindjang, J., Lecomte-Beckers, J., Gfhiri, R., Boeraeve, P., & Cescotto, S. (2001). Quantitative description of MC, M2C, M6C and M7C3 carbides in high speed steel rolls. In P. Sandera (Ed.), proceedings of the MSMF-3 international conference held in Brno (pp. 710-717). Peer reviewed |
Lecomte-Beckers, J., & Tchuindjang, J. T. (2001). Influence of some heat treatments parameters on the microstructure of high alloyed steels. In Proceedings of the MSMF-3 International Conference (pp. 693). Peer reviewed |
 | Lecomte-Beckers, J., Tchoufang Tchuindjang, J., Gfhiri, R., Boeraeve, P., De Colnet, L., & Pirard, E. (2001). Effect of alumina and titanium nitrides inclusions on mechanical properties in high alloyed steels. In Sandera (Ed.), Proceedings of the MSMF-3 International Conference (pp. 693-700). Peer reviewed |
 | Lecomte-Beckers, J., & Magnée, A. (2001). Microstructural study of oxides and carbides used for abrasion properties in high alloyed steels. In Proceedings of the 8th International Conference on Composites Engineering (pp. 527-528). Peer reviewed |
 | De Colnet, L., Pirard, E., Lecomte-Beckers, J., & Tchoufang Tchuindjang, J. (2001). Image analysis of carbides in high speed steel rolls and their relationship with the mechanical properties. In F. Mücklich (Ed.), Proceedings of the Euromat Metallographic Conference, Progress in Metallography (pp. 139-143). Saarbrucken, Germany: Werkstof Informationsgesellschaft. |
 | Magnée, A., & Lecomte-Beckers, J. (2000). Microstructure and abrasion resistance of tool steels reinforced by dispersed oxides and carbides phases. In Revue de Métallurgie- Journées d'Automne de la Société Française de Métallurgie et de Matériaux (pp. 4-9). Peer reviewed |
 | Lecomte-Beckers, J., Terziev, L., & Breyer, J. P. (2000). Performance characteristics of mill rolls from graphite chromium cast iron. Stalʹ, 1, 46-50. Peer reviewed |
Lecomte-Beckers, J. (2000). Techniques modernes d'analyse microscopique en sciences des matériaux. (Edition provisoire). |
 | Lecomte-Beckers, J., & Magnée, A. (2000). Characteristics of powder steel strengthened by disperse oxide and carbide phases. Stalʹ, 10, 98-99. Peer reviewed |
Lecomte-Beckers, J. (03 November 1999). Le collage structural : Préparation de surface et durabilité (Corrosion et durabilité des assemblages collés) - Journée d'étude organisée par la SRBII (société Royale Belge des ingénieurs et des Industriels) et le CRIF. |
Lecomte-Beckers, J. (1999). Principe et utilisation des matériaux (Partim matériaux métalliques). (Edition provisoire). |
 | Lecomte-Beckers, J., Terziev, L., Breyer, J. P., & Delcour, N. (1999). Application and performances of graphitic chromium cast iron rolls. Revue de Métallurgie, 96 (11), 1401-1411. doi:10.1051/metal/199996111401 Peer reviewed |
 | Perez, F. J., Duday, D., Hierro, M. P., Gomez, C., Lecomte-Beckers, J., & Greday, Y. (1999). Surface methods for cleaner steels : evaluation of inclusions and grain boundary segregations by electrochemical impedance spectroscopy. In Proceedings of The International COST-517 : Workshop on Cleaner Metals for Industrial Exploitation (pp. 33-44). |
 | Lecomte-Beckers, J., & Tchuindjang, J. T. (1999). Study and Characterization of Inclusions in Steels obtained from ESR and Conventionally Electrical Ingot Processes. In Proceedings of the Annual Meeting of the SBM (société belge de microscopie). |
 | Charles, J. F., Habraken, A., & Lecomte-Beckers, J. (1999). Integration of recrystallisation model coupled with an elasto-visco-plastic law - Experimental tests and calibration of this model. In Proceedings of the 2nd ESAFORM Conference on Material Forming (pp. 529-532). Peer reviewed |
 | Lecomte-Beckers, J., Terziev, L., Breyer, J.-P., & Bojinov, M. V. (1999). Use of graphite chromium cast iron in hot strip mill. In Proceedings of the Conference SARUC 99 - The Southern African Roll Users Conference (pp. 49-55). Peer reviewed |
 | Lecomte-Beckers, J., & Tchuindjang, J. T. (1999). Importance of Heat Treating Procedure in the Study and the Characterization of Impurities in high alloyed Steels. In Proceedings of The International COST-517 : Workshop on Cleaner Metals for Industrial Exploitation (pp. 45-53). |
 | Lecomte-Beckers, J. (1999). Caractéristiques principales des alliages d'aluminium. In Chaire Aluminium organisée par l'Aluminium Center Belgium et le FNRS (pp. 13-30). |
Lecomte-Beckers, J., Brozova, A., Eklund, P., & Lejcek, P. (1999). International Workshop COST Action 517 : Cleaner for industrial exploitation. Luxembourg: European Commission, Office for Official Publications. |
 | Lecomte-Beckers, J., Terziev, L., & Breyer, J.-P. (1999). Effect of austenite destabilisation heat treatment on graphite precipitation in chromium iron. In Proceedings of the International Conference on Solid-SoUd Phase Transformations ‘99 (JIMIC3) (pp. 1629-1632). Kyoto, Japan: M. Koiwa, K. Otsuka and T. Miyazaki. Peer reviewed |
 | Lecomte-Beckers, J., & Magnée, A. (1998). Microstructure and properties of PM steel reinforced by dispersed oxides and carbides phases. In Proceedings of ECCM-8, European Conference on Composite Materials : Science, Technologies and Applications (pp. 113-119). Peer reviewed |
Charles, J.-F., Habraken, A., & Lecomte-Beckers, J. (1998). An elasto-viscoplastic model for forging steel at high temperatures. In Proceedings of NUMIFORM 98, Simulation of Materials Processing : Theory, Methods and Applications (pp. 277-282). Balkema, Enschede, Netherlands: Huetink, Baaijens. Peer reviewed |
Lecomte-Beckers, J., & Schubert, F. (1998). Materials for advanced power engineering 1998 : Proceedings of the 6th Liège conference. Julich, Germany: Schriften des Forschungszentrum Julich, Reihe energietechnik/Energy Technology Forschungszentrum Julich. |
 | Lecomte-Beckers, J., Terziev, L., & Breyer, J. P. (1998). Graphitization in chromium cast iron. In Mechanical Working and Steel Processing Conference Proceedings (pp. 423-431). Peer reviewed |
 | Charles, J. F., Habraken, A., & Lecomte-Beckers, J. (1998). Modeling of elasto-viscoplastic behaviour of steels at high temperatures. In Baajens & Huetink (Ed.), Proceedings of Simulation of Materials Processing, Methods and Applications. Esaform (pp. 57-60). Rotterdam, Netherlands: Balkema. Peer reviewed |
 | Terziev, L., Lecomte-Beckers, J., Bojinov, V., Petrov, R., & Breyer, J. P. (1997). Dilatometric and calorimetric study of the graphitisation of high chromium cast iron. Journal de Chimie Physique et de Physico-Chimie Biologique, 94[5], 1107-1115. doi:10.1051/jcp/1997941107 Peer reviewed |
Lecomte-Beckers, J., & Terziev, L. (1997). Study of graphite precipitation during heat treatment in chromium cast iron. In Proceeding of the Annual Meeting of the SBM/NMVS. |
Lecomte-Beckers, J. (1997). Matériaux métalliques pour Applications aérospatiales. (Edition provisoire). |
Lecomte-Beckers, J. (1996). Protection contre la corrosion. |
Lecomte-Beckers, J. (1996). Comportement des matériaux métalliques utilisés dans les systèmes énergétiques. (Edition provisoire). |
 | Terziev, L., Lecomte-Beckers, J., & Wegria, J. (1995). Influence of creep on the microstructure of Zn-Al-Cu alloys aged at 250°C. Physica Status Solidi A. Applied Research, 152[2], 405-413. doi:10.1002/pssa.2211520209 Peer Reviewed verified by ORBi |
 | Lecomte-Beckers, J., & Terziev, L. (1995). Effect of microstructural transformation on the creep resistance of Zn-Al-Cu alloys. In Proceedings of Trinocular Joint Meeting on Electron Microscopy. Peer reviewed |
Lecomte-Beckers, J. (1995). Corrosion des Matériaux métalliques. |
 | Terziev, L., Lecomte-Beckers, J., & Wegria, J. (1994). Microstructural study of a zinc-aluminium-copper alloy after thermal treatment at 100°C and creep. Zeitschrift für Metallkunde, 85[9], 640-644. Peer reviewed |
 | Lecomte-Beckers, J., Coutsouradis, D., & Kazimierzak, B. (1994). Recrystallisation behaviour of Fe base ODS alloys. In Proceedings of the International Conference on Materials for Advanced Power Engineering. Liège, Belgium: Kluwer Academic. Peer reviewed |
 | Lecomte-Beckers, J., Terziev, L., & Wegria, J. (1994). Etude des relations entre les microstructures obtenues par vieillissement isotherme et le comportement mécanique (fatigue, résilience) dans des alliages Zn-Al et Zn-Al-Cu. Revue de Métallurgie, 91[5], 789-798. Peer reviewed |
 | Lecomte-Beckers, J., Terziev, L., & Wegria, J. (1994). Evolution of microstructure during creep of thermally treated Zn-Al-Cu alloy. In Proceedings of the 13th International Congress on Electron Microscopy (pp. 435). Peer reviewed |
 | Lecomte-Beckers, J., Terziev, Wegria, & Tabakova. (1994). Effect of isothermal ageing on the Zn-Al alloys creep characteristics. In Proceedings of The 3rd International Conference on Zn-Al Alloys - Advances in Science, Technology and Applications of Zn-Al Alloys (pp. 101-107). Mexico: G. Torres Villasenor, Y.H ZHU and PINA. |
 | Lecomte-Beckers, J., Coutsouradis, D., Lecomte-Mertens, C., & Kazimierzak, B. (1994). Mechanical properties and recrystallisation behaviour of Fe base ODS alloys. In Proceedings of PM'94, Congrès mondial de Métallurgie des Poudres (pp. 527-530). Paris, France: Les Editions de Physique. Peer reviewed |
 | Lecomte-Beckers, J., Terziev, L., & Wegria, J. (1993). TEM investigation of transition phases precipitation in ZA alloys after isothermal aging at 250°C and subsequent creep at high temperature. Materials Science Forum (Intergranular and Interphase Boundaries in Materials), 126-128, 667-670. Peer reviewed |
Lecomte-Beckers, J. (1993). Matériaux métalliques spéciaux. (Edition provisoire). |
 | Magnée, A., & Lecomte-Beckers, J. (1992). Role of impurities in reclaimed WC-TaC-TiC-Co powders used in cutting tools. In Proceedings of the International Conference on Advances in Hard Materials Production (pp. 2-1-2/15). |
Lecomte-Beckers, J. (1992). Comportement des matériaux métalliques soumis à irradiation et corrosion. |
 | Rachev, P., Terziev, L., Lecomte-Beckers, J., & Wegria, J. (1991). Electron microscopical investigations of hexagonal phase precipitation in Zn---12 wt% Al---1 wt% Cu and Zn---27 wt% Al---2 wt% Cu alloys. Acta Metallurgica et Materialia, 39 (9), 2177-2182. doi:10.1016/0956-7151(91)90187-6 Peer reviewed |
Lecomte-Beckers, J., Coutsouradis, D., & Lamberigts, M. J. (1990). Procédé et dispositif pour l'introduction d'éléments de renforcement dans un bain de métal fondu (page 17). |
 | Lecomte-Beckers, J., Coutsouradis, D., & Lamberigts, M. (1990). Silicon carbide fibers and particles reinforced aluminium alloys produced by stir casting. In Proceedings of The 4th European Conference on Composite Materials - Developments in The Science and Technology of Composite Materials (pp. 387-392). Peer reviewed |
 | Lecomte-Beckers, J., Coutsouradis, D., & Lamberigts, M. (1990). Study of composite aluminium alloys produced by stir casting. In Proceedings of the International Conference on Advanced Aluminium and Magnesium Alloys (pp. 719-727). Peer reviewed |
 | Terziev, L., Rachev, P., Lecomte-Beckers, J., & Greday, T. (1990). Phase formation during aging of Zn-12% Al and Zn-27% Al alloys at 100°C. Zeitschrift für Metallkunde, 81[6], 424-427. Peer reviewed |
 | Rashev, P., Terziev, L., Lecomte-Beckers, J., & Greday, T. (1989). Quantitative X-ray microanalysis of precipitates in zinc-aluminium-copper. In Proceeding of the 12th International Congress on XR optics and microanalyses. Peer reviewed |
 | Lecomte-Beckers, J., Terziev, L., Rashev, P., & Walmag, G. (1989). Etude microstructurale des phases métastables dans les alliages Zn-Al. Journal de Microscopie et de Spectroscopie Electroniques, 14[2], 85-94. Peer reviewed |
 | Terziev, L., Lecomte-Beckers, J., Rashev, P., & Greday, T. (1989). Study of transition phases during isothermal aging at 250°C of Zn-27% Al alloy. Physica Status Solidi A. Applied Research, 116[2], 521-527. doi:10.1002/pssa.2211160209 Peer Reviewed verified by ORBi |
 | Lecomte-Beckers, J. (1988). Study of solidification features of nickel-base superalloys in relation with composition. Metallurgical Transactions A: Physical Metallurgy and Materials Science, 19A(9), 2333-2340. doi:10.1007/BF02645057 Peer reviewed |
Lecomte-Beckers, J., Terziev, L., Rachev, P., & Walmag, G. (1988). Etude microstructurale des alliages ZA12 et ZA27 au cours du vieillissement. Journal de Microscopie et de Spectroscopie Electroniques, 13, 43. Peer reviewed |
 | Lecomte-Beckers, J. (1988). Study of microporosity formation in nickel-base superalloys. Metallurgical Transactions A: Physical Metallurgy and Materials Science, 19A(9), 2341-2348. doi:10.1007/BF02645058 Peer reviewed |
 | Lecomte-Beckers, J. (1988). Relation between chemistry, solidification behaviour, microstructure and microporosity in nickel-base superalloys. In Proceedings of 6th International Symposium on Superalloys (pp. 713-721). Peer reviewed |
 | Terziev, L., Rashev, P., Lecomte-Beckers, J., & Greday, T. (1987). Microstructural study of Zn-Al alloy. In Proceedings of The 4th Physics and Chemistry of Solids, School-Symposium Physics of Metals, Polish Academy of Sciences, Institute for Low Temperature and Structure Research (pp. 110-113). |
 | Lecomte-Beckers, J., & Walmag, G. (1987). Microstructural study of high strength rolled Zn-Cu-Ti alloys. Micron and Microscopica Acta, 18 (3), 241-242. doi:10.1016/0739-6260(87)90079-7 Peer reviewed |
Lecomte-Beckers, J. (1987). Fonderie de Précision - solidification des métaux et alliages, Notes du cours de "Fonderie de Précision". |
 | Lecomte-Beckers, J., Terziev, L., & Greday, T. (1987). Aspects of the phase transformation during aging of Zn-11% Al and Zn-27% Al alloys. In Proceedings of the International Conference on Phase Transformation (pp. 250-253). Peer reviewed |
 | Lecomte-Beckers, J., & Diderrich, E. (1987). Mise en oeuvre de composites à matrice métallique bore-aluminium. ATB Métallurgie, 27 (1), 3-10. |
 | Lecomte-Beckers, J., & Lamberigts, M. (1986). Microporosity formation in nickel-base superalloys in relation to their solidification sequence. In Proceedings of the International Conference of High Temperature Alloys for Gas Turbine and Other Applications (pp. 745-755). Kluwer. Peer reviewed |
 | Lecomte-Beckers, J., Terziev, L., Wegria, J., & Greday, T. (1986). Microstructural study of Zn-11% Al and Zn-27% Al alloys. In Proceedings of the 25th Annual Conference of Metallurgists (pp. 35-43). |
Lecomte-Beckers, J. (1986). Les matériaux composites à matrice métallique, Journée d'informations sur les matériaux composites (ISIL). |
 | Lamberigts, M., Lecomte-Beckers, J., & Drapier, J.-M. (1986). Reverting foundry nickel-base superalloys. In International Conference on High Temperature Alloys for Gas Turbine and Other Applications (pp. 745-756). kluwer. Peer reviewed |
Lecomte-Beckers, J. (1985). Les matériaux composites à matrice métallique. édité par l'Institut Provincial d'Enseignement de Promotion Sociale à Seraing. |
Lecomte-Beckers, J. (1985). Les microporosités dans les superalliages de nickel. Etude de leur formation en relation avec la composition, la séquence de solidification, les ségrégations et la microstructure [Doctoral thesis, ULiège - Université de Liège]. ORBi-University of Liège. https://orbi.uliege.be/handle/2268/280 |
Lecomte-Beckers, J. (1985). Le nickel, Addendum au Chapitre VI du cours de "Connaissance des Matériaux métalliques" consacré à l'étude des non-ferreux. |
 | Lamberigts, M., Lecomte-Beckers, J., Walmag, G., & Drapier, J.-M. (1985). The investment casting and processing of cobalt-base and cobalt-bearing superalloys. In Second Congress Cobalt Metallurgy and Uses (pp. 198-224). Peer reviewed |
 | Coutsouradis, D., Leroy, V., Greday, T., & Lecomte-Beckers, J. (1983). Review of hot shortness problems in copper-containing steel. ATB Métallurgie, 23 (3), 7-1-7/24. |
 | Daoxin, J., & Lecomte-Beckers, J. (1982). Research regarding the formation of micropores in a Ni-Ti-C alloy during directional solidification under vacuum. Metallurgical reports CRM, 60, 3-12. |
 | Daoxin, J., Lecomte-Beckers, J., & Habraken, L. (1982). Modelling micropore formation during directional solidification. metallurgical report CRM, 59, 25-34. |
Lecomte-Beckers, J. (1982). Application de la diffraction des rayons X en métallurgie, Notes des Travaux Pratiques de Métallurgie Physique. |
 | Ji, D., Lecomte-Beckers, J., & Habraken, L. (1982). Formation of micropores in a DS Ni-Ti-C alloy. Proceedings Conference on High Temperature Alloys Gas Turbines, 973-986. Peer reviewed |
 | Habraken, L., & Lecomte-Beckers, J. (1982). Hot shortness and scaling of Copper containing steels. In I. Le May & L. Mc. Schetky, Copper in Iron and Steel (pp. 45-81). Wiley & Sons. |
Lecomte-Beckers, J. (1981). Etude de la formation des microporosités dans l'alliage Ni-TiC en solidification dirigée. |
Lecomte-Beckers, J. (1980). Perspectives et développement des matériaux composites à matrice aluminium. |
Lecomte-Beckers, J. (1980). Mécanique de l'écoulement plastique dans la mise à forme, Chapitres IX du cours de "Métallurgie Physique". |
 | Lecomte-Beckers, J. (1979). Modélisation écologique d'une rivière en vue de l'optimisation de l'épuration. Revue IRE, 3[6], 43-55. |
Lecomte-Beckers, J. (1979). La surface du métal : Relation entre le comportement en surface et le comportement en volume d'un matériau, Chapitres I et VII du cours de "Physique du Métal". |
Lecomte-Beckers, J. (1979). Microscopie électronique à transmission et diffraction électronique, Notes des Travaux pratiques de Métallurgie Physique. |
Lecomte-Beckers, J. (1979). Les matériaux composites à matrice aluminium, Chapitre X du cours "Connaissance des matériaux aérospatiaux". |
 | Lecomte-Beckers, J. (1979). Modélisation du phénomène de biodégradation naturelle en rivière polluée en vue de l'optimisation de l'épuration. Wallonie: Revue du Conseil Économie et Social de la Région Wallonne, 79 (3-4), 339-374. |