Publications et communications de Laurent Duchene

LégendeIndices bibliométriques liés à la revue (pour celles dont l'ISSN a été indiqué par l'auteur) IF = Impact factor Thomson ISI. Sont indiqués : IF de l’année de publication et IF de la dernière édition du JCR (last), « ? » si pas encore connu d'ORBi ; « - »  si inexistant. IF5 : idem que IF mais pour une période de 5 ans (nouvel indice depuis 2009). EigenF = EigenFactor (voir : http://www.eigenfactor.org/). Article Infl. = Article Influence : EigenFactor divisé par le nombre d’articles publiés dans cette revue. En savoir plus ? http://orbi.ulg.ac.be/rpt#revIndices bibliométriques liés à l'article ORBi viewed = nombre total de visualisations de la référence sur ORBi (dont X en interne à l'ULiège). ORBi downloaded = nombre total de téléchargements du texte intégral via ORBi, y compris tirés à part. SCOPUS® = nombre de citations du document repérées par SCOPUS®. En savoir plus ? http://orbi.ulg.ac.be/rpt#art(Avertissement : en fonction des disciplines, certains indicateurs bibliométriques peuvent ne pas se révéler pertinents)__________________________________ , , etc: texte intégral du document disponible en Open Access , , etc: texte intégral du document disponible en accès restreint Peer reviewed (vérifié par ORBi) : l'information est présente dans la base ORBi des périodiques

1. Thèses et mémoires

1.b. Thèses de doctorat

Duchene, L. (2003). FEM study of metal sheets with a texture based, local description of the yield locus. Unpublished doctoral thesis, Université de Liège, ​Liège, ​​Belgique.
Jury: Habraken, A. (Promotor), Magnée, A., Cescotto, S., Lecomte-Beckers, J., Van Houtte, P., Cailletaud, G., Lemoine, X., & Barlat, F.
ORBi viewed: 77 (12 ULiège) ; downloaded: 173 (6 ULiège) — SCOPUS®: -

1.c. Mémoires de second cycle (licence, master, DES, DEA)

Duchene, L. (2000). Implementation of a yield locus interpolation method in the finite element code LAGAMINE. Unpublished DEA/DES thesis, Université de Liège, ​Liège, ​​Belgique.
ORBi viewed: 33 (5 ULiège) ; downloaded: 33 (5 ULiège) — SCOPUS®: -

3. Articles dans des revues scientifiques avec peer reviewing

3.a. À portée internationale

En tant que premier ou dernier auteur

ben bettaieb, A., Velosa de Sena, J. I., Alves de Sousa, R., Valente, R., Habraken, A., & Duchene, L. (2015). On the comparison of two solid-shell formulations based on in-plane reduced and full integration schemes in linear and non-linear applications. Finite Elements in Analysis and Design, 107, 44-59.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 25 (1 ULiège) ; downloaded: 28 (1 ULiège) — SCOPUS®: 2 (2 sans les autocitations)
IF 2015: 2.175; last: 2.175; IF5: 2.169 — EigenF: — Article Infl.:
Keller, C., Hug, E., Habraken, A., & Duchene, L. (2015). Effect of stress path on the miniaturization size effect for nickel polycrystals. International Journal of Plasticity, 64, 26-39.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 61 (28 ULiège) ; downloaded: 14 (14 ULiège) — SCOPUS®: 5 (3 sans les autocitations)
IF 2015: 5.623; last: 5.623; IF5: 6.23 — EigenF 2015: ?; last: 0.016 — Article Infl. 2015: ?; last: 1.9
Gilles, G., Habraken, A., & Duchene, L. (2014). Experimental investigation and phenomenological modeling of the quasi-static mechanical behavior of TA6V titanium alloy. Key Engineering Materials [=KEM], 622-623, 1200-1206.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 57 (16 ULiège) ; downloaded: 10 (8 ULiège) — SCOPUS®: 0
Zhang, L., Habraken, A., Ben Bettaieb, A., & Duchene, L. (2013). Parametric study of metal/polymer multilayer coatings for temperature wrinkling prediction. Journal of Materials Engineering and Performance, 22(9), 2437-2445.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 45 (20 ULiège) ; downloaded: 12 (12 ULiège) — SCOPUS®: 0
IF 2013: 0.981; last: 1.094; IF5: 1.131 — EigenF 2013: 0.0056; last: 0.007 — Article Infl. 2013: 0.3125; last: 0.3
Duchene, L., Guzmán Inostroza, C. F., Behera, A. K., Duflou, J., & Habraken, A. (2013, March). Numerical simulation of a pyramid steel sheet formed by single point incremental forming using solid-shell finite elements. Key Engineering Materials [=KEM].
Peer reviewed (vérifié par ORBi)
ORBi viewed: 163 (70 ULiège) ; downloaded: 133 (36 ULiège) — SCOPUS®: 3 (1 sans les autocitations)
Ben Bettaieb, A., Tuninetti Vásquez, V., & Duchene, L. (2012, September). Numerical simulation of T-bend of multilayer coated metal sheet using solid-shell element. Steel Research International.
Peer reviewed
ORBi viewed: 200 (53 ULiège) ; downloaded: 16 (12 ULiège) — SCOPUS®: 0
IF 2012: 0.493; last: 1.021; IF5: 0.833 — EigenF 2012: 0.004; last: 0.005 — Article Infl. 2012: 0.2; last: 0.3
Keller, C., Habraken, A., & Duchene, L. (2012). Finite element investigation of size effects on the mechanical behavior of nickel single crystals. Materials Science & Engineering : A, 550(30), 342-349.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 101 (24 ULiège) ; downloaded: 436 (14 ULiège) — SCOPUS®: 5 (3 sans les autocitations)
IF 2012: 2.108; last: 2.647; IF5: 2.959 — EigenF 2012: 0.084; last: 0.072 — Article Infl. 2012: 0.7; last: 0.8
Guzmán Inostroza, C. F., Ben Bettaieb, A., Velosa de Sena, J. I., Alves de Sousa, R., Habraken, A., & Duchene, L. (2012). Evaluation of the Enhanced Assumed Strain and Assumed Natural Strain in the SSH3D and RESS3 Solid Shell Elements for Single Point Incremental Forming Simulation. Key Engineering Materials [=KEM], 504-506, 913-918.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 183 (52 ULiège) ; downloaded: 25 (25 ULiège) — SCOPUS®: 1 (1 sans les autocitations)
Keller, C., Hug, E., Habraken, A., & Duchene, L. (2012). Finite element analysis of the free surface effects on the mechanical behavior of thin nickel polycrystals. International Journal of Plasticity, 29, 155–172.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 142 (38 ULiège) ; downloaded: 13 (13 ULiège) — SCOPUS®: 30 (20 sans les autocitations)
IF 2012: 4.356; last: 5.623; IF5: 6.23 — EigenF 2012: 0.014; last: 0.016 — Article Infl. 2012: 1.7; last: 1.9
Ben Bettaieb, M., Débordes, O., Dogui, A., & Duchene, L. (2012). Averaging properties for periodic homogenization and large deformation. International Journal for Multiscale Computational Engineering.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 96 (26 ULiège) ; downloaded: 18 (10 ULiège) — SCOPUS®: 2 (2 sans les autocitations)
IF 2012: 0.784; last: 1.103; IF5: 1.159 — EigenF 2012: 0.001; last: 0.002 — Article Infl. 2012: 0.4; last: 0.5
Gilles, G., Cazacu, O., Hammami, W., Habraken, A., & Duchene, L. (2012). Experimental and numerical study of TA-6V mechanical behavior in different monotonic loading conditions at room temperature. Procedia IUTAM, 3, 100-114.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 79 (34 ULiège) ; downloaded: 13 (13 ULiège) — SCOPUS®: 4 (3 sans les autocitations)
Hammami, W., Gilles, G., Habraken, A., & Duchene, L. (2011). Phenomenological and crystal plasticity approaches to describe the mechanical behaviour of Ti6Al4V titanium alloy. International Journal of Material Forming, 4(2), 205-2015.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 121 (46 ULiège) ; downloaded: 22 (18 ULiège) — SCOPUS®: 9 (8 sans les autocitations)
IF 2011: -; last: 1.241; IF5: 0.882 — EigenF: — Article Infl.:
Ben Bettaieb, M., Lemoine, X., Bouaziz, O., Habraken, A., & Duchene, L. (2011). Numerical modeling of damage evolution of DP steels on the basis of X-ray tomography measurements. Mechanics of Materials, 43(3), 139-156.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 113 (38 ULiège) ; downloaded: 19 (19 ULiège) — SCOPUS®: 13 (8 sans les autocitations)
IF 2011: 1.769; last: 2.636; IF5: 2.812 — EigenF 2011: 0.009; last: 0.008 — Article Infl. 2011: 1.1; last: 1.0
Ben Bettaieb, M., Lemoine, X., Bouaziz, O., Habraken, A., & Duchene, L. (2011). A finite element analysis of the bending and the bendability of metallic sheets. International Journal of Material Forming, 4(3), 283-297.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 64 (16 ULiège) ; downloaded: 12 (10 ULiège) — SCOPUS®: 0
IF 2011: -; last: 1.241; IF5: 0.882 — EigenF: — Article Infl.:
Gilles, G., Hammami, W., Libertiaux, V., Cazacu, O., Yoon, J. H., Habraken, A., & Duchene, L. (2011). Experimental characterization and elasto-plastic modeling of the quasi-static mechanical response of TA-6 V at room temperature. International Journal of Solids & Structures, 48(9), 1277–1289.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 127 (73 ULiège) ; downloaded: 24 (23 ULiège) — SCOPUS®: 39 (19 sans les autocitations)
IF 2011: 1.857; last: 2.081; IF5: 2.56 — EigenF 2011: 0.034; last: 0.026 — Article Infl. 2011: 1.0; last: 1.0
Verleysen, P., Peirs, J., Van Slycken, J., Faes, K., & Duchene, L. (2011). Effect of strain rate on the forming behaviour of sheet metals. Journal of Materials Processing Technology, 211, 1457-1464.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 267 (4 ULiège) ; downloaded: 7 (2 ULiège) — SCOPUS®: 38 (38 sans les autocitations)
IF 2011: 1.783; last: 2.359; IF5: 2.748 — EigenF 2011: 0.037; last: 0.022 — Article Infl. 2011: 0.6; last: 0.8
Marmi, A., Habraken, A., & Duchene, L. (2009). Multiaxial fatigue damage modelling at Macro scale of Ti6AL4V alloy. International Journal of Fatigue, 31, 2031-2040.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 176 (44 ULiège) ; downloaded: 414 (29 ULiège) — SCOPUS®: 29 (29 sans les autocitations)
IF 2009: 1.602; last: 2.162; IF5: 2.252 — EigenF 2009: 0.013; last: 0.012 — Article Infl. 2009: 0.7; last: 0.7
Cescotto, S., Xiang, L., & Duchene, L. (2008). A Natural Neighbor Method Based on Fraeijs de Veubeke Variational Principle for Elastoplasticity and Fracture Mechanics. Journal of Engineering Materials & Technology, 130.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 44 (11 ULiège) ; downloaded: 4 (4 ULiège) — SCOPUS®: 1 (0 sans les autocitations)
IF 2008: 0.938; last: 0.935; IF5: 0.908 — EigenF 2008: 0.004; last: 0.002 — Article Infl. 2008: 0.6; last: 0.4
de Montleau, P., Habraken, A., & Duchene, L. (2008). A new finite element integration scheme. Application to a simple shear test of anisotropic material. International Journal for Numerical Methods in Engineering.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 82 (26 ULiège) ; downloaded: 13 (11 ULiège) — SCOPUS®: 5 (2 sans les autocitations)
IF 2008: 2.229; last: 2.1; IF5: 2.724 — EigenF 2008: 0.033; last: 0.026 — Article Infl. 2008: 1.0; last: 1.3
Duchene, L., Lelotte, T., Flores, P., Bouvier, S., & Habraken, A. (2008). Rotation of axes for anisotropic metal in FEM simulations. International Journal of Plasticity, (24), 397–427.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 88 (21 ULiège) ; downloaded: 177 (20 ULiège) — SCOPUS®: 22 (17 sans les autocitations)
IF 2008: 3.875; last: 5.623; IF5: 6.23 — EigenF 2008: 0.014; last: 0.016 — Article Infl. 2008: 1.4; last: 1.9
Duchene, L., El Houdaigui, F., & Habraken, A. (2007). Length changes and texture prediction during free end torsion test of copper bars with FEM and remeshing techniques. International Journal of Plasticity, 23(8), 1417-1438.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 106 (11 ULiège) ; downloaded: 225 (9 ULiège) — SCOPUS®: 30 (19 sans les autocitations)
IF 2007: 4.516; last: 5.623; IF5: 6.23 — EigenF 2007: 0.013; last: 0.016 — Article Infl. 2007: 1.3; last: 1.9
Duchene, L., & Habraken, A. (2005). Analysis of the sensivity of FEM predictions to numerical parameters in deep drawing simulations. European Journal of Mechanics A : Solids, (24), 614-629.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 78 (6 ULiège) ; downloaded: 276 (7 ULiège) — SCOPUS®: 28 (22 sans les autocitations)
IF 2005: 1.071; last: 2.453; IF5: 2.467 — EigenF 2005: 0.007; last: 0.007 — Article Infl. 2005: 0.9; last: 0.8
Habraken, A., & Duchene, L. (2004). Anisotropic elasto-plastic finite element analysis using a stress-strain interpolation method based on a polycrystalline model. International Journal of Plasticity, 20(Issue 8-9), 1525-1560.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 84 (9 ULiège) ; downloaded: 286 (8 ULiège) — SCOPUS®: 48 (32 sans les autocitations)
IF 2004: 3.819; last: 5.623; IF5: 6.23 — EigenF 2004: 0.012; last: 0.016 — Article Infl. 2004: 1.4; last: 1.9
Duchene, L., Godinas, A., Cescotto, S., & Habraken, A. (2002). Texture evolution during deep-drawing processes. Journal of Materials Processing Technology, 125-126, 110-118.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 49 (8 ULiège) ; downloaded: 89 (7 ULiège) — SCOPUS®: 9 (2 sans les autocitations)
IF 2002: 0.362; last: 2.359; IF5: 2.748 — EigenF 2002: 0.017; last: 0.022 — Article Infl. 2002: 0.2; last: 0.8

En tant que co-auteur

Tran, H. S., Tchuindjang, J. T., Paydas, H., Mertens, A., Tomé Jardin, R. A., Duchene, L., Carrus, R., Lecomte-Beckers, J., & Habraken, A. (2017). 3D thermal finite element analysis of laser cladding processed Ti-6Al-4V part with microstructural correlations. Materials & Design, 128, 130-142.
Peer reviewed
ORBi viewed: 79 (29 ULiège) ; downloaded: 7 (7 ULiège) — SCOPUS®: 1 (1 sans les autocitations)
IF 2017: ?; last: 3.997; IF5: 4.023 — EigenF: — Article Infl.:
Velosa De Sena, J., Guzmán Inostroza, C. F., Duchene, L., Habraken, A., Behera, A. K., Duflou, J., Angelo Valente, R., & Alves de Sousa, R. J. (2016). Simulation of a two-slope pyramid made by SPIF using an adaptive remeshing method with solid-shell finite element. International Journal of Material Forming, 9(3), 259-434.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 74 (42 ULiège) ; downloaded: 145 (19 ULiège) — SCOPUS®: 2 (1 sans les autocitations)
IF 2016: ?; last: 1.241; IF5: 0.882 — EigenF: — Article Infl.:
Sena, J., Lequesne, C., Duchene, L., Habraken, A., Valente, R., & Alves de Sousa, R. (2016). Single point incremental forming simulation with adaptive remeshing technique using solid-shell elements. Engineering Computations International Journal for Computer- Aided Engineering and Software, 33(5), 1388-1421.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 29 (5 ULiège) ; downloaded: 106 (5 ULiège) — SCOPUS®: 1 (1 sans les autocitations)
IF 2016: ?; last: 0.691; IF5: 0.986 — EigenF: — Article Infl.:
HUG, E., DUBOS, P. A., keller, C., Duchene, L., & Habraken, A. (2015). Size effects and temperature dependence on strain-hardening mechanisms in some face centered cubic materials. Mechanics of Materials, 91, 136-151.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 71 (5 ULiège) ; downloaded: 128 (6 ULiège) — SCOPUS®: 7 (5 sans les autocitations)
IF 2015: 2.636; last: 2.636; IF5: 2.812 — EigenF: — Article Infl.:
Ben Bettaieb, M., Débordes, O., Dogui, A., Duchene, L., & Keller, C. (2012). On the numerical integration of rate independent single crystal behavior at large strain. International Journal of Plasticity, 32-33, 184-217.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 43 (12 ULiège) ; downloaded: 483 (3 ULiège) — SCOPUS®: 6 (5 sans les autocitations)
IF 2012: 4.356; last: 5.623; IF5: 6.23 — EigenF 2012: 0.014; last: 0.016 — Article Infl. 2012: 1.7; last: 1.9
Bouffioux, C., Lequesne, C., Vanhove, H., Duflou, J. R., Pouteau, P., Duchene, L., & Habraken, A. (2011). Experimental and numerical study of an AlMgSc sheet formed by an incremental process. Journal of Materials Processing Technology, 211(11), 1684-1693.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 110 (32 ULiège) ; downloaded: 14 (14 ULiège) — SCOPUS®: 8 (7 sans les autocitations)
IF 2011: 1.783; last: 2.359; IF5: 2.748 — EigenF 2011: 0.037; last: 0.022 — Article Infl. 2011: 0.6; last: 0.8
Ben Bettaieb, M., Lemoine, X., Duchene, L., & Habraken, A. (2011). On the numerical integration of an advanced Gurson model. International Journal for Numerical Methods in Engineering, 85(8), 1049-1072.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 136 (37 ULiège) ; downloaded: 19 (18 ULiège) — SCOPUS®: 7 (2 sans les autocitations)
IF 2011: 2.009; last: 2.1; IF5: 2.724 — EigenF 2011: 0.029; last: 0.026 — Article Infl. 2011: 1.1; last: 1.3
Gerday, A.-F., Ben Bettaieb, M., Duchene, L., Clement, N., Diarra, H., & Habraken, A. (2011). Material behavior of the hexagonal alpha phase of a titanium alloy identified from nanoindentation tests. European Journal of Mechanics A : Solids, 30, 248-255.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 122 (31 ULiège) ; downloaded: 12 (11 ULiège) — SCOPUS®: 9 (9 sans les autocitations)
IF 2011: 1.484; last: 2.453; IF5: 2.467 — EigenF 2011: 0.006; last: 0.007 — Article Infl. 2011: 0.8; last: 0.8
Chen, E., Duchene, L., Habraken, A., & Verlinden, B. (2011). Prediction of the Tension/Compression asymmetry of ECAP processed FCC material using an integrated model based on dislocation and back-stress. Materials Science Forum, 667-669, 961-966.
Peer reviewed
ORBi viewed: 54 (8 ULiège) ; downloaded: 5 (5 ULiège) — SCOPUS®: 1 (1 sans les autocitations)
Verlinden, B., Chen, E., Duchene, L., & Habraken, A. (2011). Transient yielding during compression tests on ECAP’ed AA1050 Aluminium. Materials Science Forum, 667-669, 955-960.
Peer reviewed
ORBi viewed: 66 (10 ULiège) ; downloaded: 5 (5 ULiège) — SCOPUS®: 1 (1 sans les autocitations)
Henrard, C., Bouffioux, C., Eyckens, P., Sol, H., Duflou, J. R., Van Houtte, P., Van Bael, A., Duchene, L., & Habraken, A. (2011). Forming forces in single point incremental forming: prediction by finite element simulations, validation and sensitivity. Computational Mechanics, 47, 573-590.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 323 (92 ULiège) ; downloaded: 35 (25 ULiège) — SCOPUS®: 43 (36 sans les autocitations)
IF 2011: 2.065; last: 2.639; IF5: 2.746 — EigenF 2011: 0.011; last: 0.009 — Article Infl. 2011: 1.0; last: 1.0
Lequesne, C., Plumier, A., Duchene, L., & Habraken, A. (2010). Modeling of Crack Propagation in Weld Beam-to-Column Connection Submitted to Cyclic Loading with Cohesive Zone Model. Journal of ASTM International, 7(5).
Peer reviewed
ORBi viewed: 184 (38 ULiège) ; downloaded: 14 (10 ULiège) — SCOPUS®: 0
Ben Bettaieb, M., Lemoine, X., Duchene, L., & Habraken, A. (2010). Simulation of bending process of hardening metallic sheets using damage model. Part I: Theoretical development and numerical implementation. Materials Science & Engineering : A, 528(1), 434-441.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 61 (17 ULiège) ; downloaded: 7 (7 ULiège) — SCOPUS®: 6 (4 sans les autocitations)
IF 2010: 2.101; last: 2.647; IF5: 2.959 — EigenF 2010: 0.101; last: 0.072 — Article Infl. 2010: 0.7; last: 0.8
Ben Bettaieb, M., Lemoine, X., Duchene, L., & Habraken, A. (2010). Simulation of bending process of hardening metallic sheets using damage model. Part II: Numerical investigations. Materials Science & Engineering : A, 528(1), 442-448.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 49 (14 ULiège) ; downloaded: 6 (6 ULiège) — SCOPUS®: 5 (4 sans les autocitations)
IF 2010: 2.101; last: 2.647; IF5: 2.959 — EigenF 2010: 0.101; last: 0.072 — Article Infl. 2010: 0.7; last: 0.8
Flores, P., Tuninetti Vásquez, V., Gilles, G., Gonry, P., Duchene, L., & Habraken, A. (2010). Accurate stress computation in plane strain tensile tests for sheet metal using experimental data. Journal of Materials Processing Technology, 210, 1772-1779.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 123 (56 ULiège) ; downloaded: 21 (21 ULiège) — SCOPUS®: 19 (12 sans les autocitations)
IF 2010: 1.57; last: 2.359; IF5: 2.748 — EigenF 2010: 0.038; last: 0.022 — Article Infl. 2010: 0.5; last: 0.8
Chen, E., Duchene, L., Habraken, A., & Verlinden, B. (2010). Multiscale modeling of back-stress evolution in equal-channel angular pressing: from one pass to multiple passes. Journal of Materials Science, 45(17), 4696-4704.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 40 (10 ULiège) ; downloaded: 6 (6 ULiège) — SCOPUS®: 2 (2 sans les autocitations)
IF 2010: 1.859; last: 2.302; IF5: 2.288 — EigenF 2010: 0.053; last: 0.042 — Article Infl. 2010: 0.6; last: 0.6
Chen, E., Duchene, L., Habraken, A., & Verlinden, B. (2010). Multiscale modelling of back-stress during equal-channel angular pressing. Reviews of advanced materials science, 25(1), 23-31.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 57 (21 ULiège) ; downloaded: 7 (7 ULiège) — SCOPUS®: 2 (2 sans les autocitations)
IF 2010: 1.859; last: 2.302; IF5: 2.288 — EigenF 2010: 0.053; last: 0.042 — Article Infl. 2010: 0.6; last: 0.6
Keller, C., Afteni, M., Banu, M., Habraken, A., Hug, E., Castagne, S., Duchene, L., & Ben Bettaieb, M. (2010). Effect of a decrease in sample dimensions on plasticity: application to the micro-forming of nickel. Steel Research International, 81(9), 1173-1177.
Peer reviewed
ORBi viewed: 140 (31 ULiège) ; downloaded: 16 (13 ULiège) — SCOPUS®: -
IF 2010: 0.455; last: 1.021; IF5: 0.833 — EigenF 2010: 0.004; last: 0.005 — Article Infl. 2010: 0.2; last: 0.3
Poortmans, S., Duchene, L., Habraken, A., & Verlinden, B. (2009). Modelling compression tests on aluminium produced by equal channel angular extrusion. Acta Materialia.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 111 (13 ULiège) ; downloaded: 4 (4 ULiège) — SCOPUS®: 14 (12 sans les autocitations)
IF 2009: 3.76; last: 5.058; IF5: 5.149 — EigenF 2009: 0.106; last: 0.091 — Article Infl. 2009: 1.8; last: 1.7
Gerday, A.-F., Ben Bettaieb, M., Duchene, L., Clément, N., Diarra, H., & Habraken, A. (2009). Interests and limitations of nanoindentation for bulk multiphase material identification: Application to the β phase of Ti-5553. Acta Materialia, (57), 5186 - 5195.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 190 (43 ULiège) ; downloaded: 237 (21 ULiège) — SCOPUS®: 26 (25 sans les autocitations)
IF 2009: 3.76; last: 5.058; IF5: 5.149 — EigenF 2009: 0.106; last: 0.091 — Article Infl. 2009: 1.8; last: 1.7
Ben Bettaieb, M., Lemoine, X., Duchene, L., & Habraken, A. (2008). Study of bendability of steel sheets. Steel Research International, (79/1), 225-232.
Peer reviewed
ORBi viewed: 482 (37 ULiège) ; downloaded: 295 (16 ULiège) — SCOPUS®: -
IF 2008: 0.344; last: 1.021; IF5: 0.833 — EigenF 2008: 0.003; last: 0.005 — Article Infl. 2008: 0.2; last: 0.3
Henrard, C., Bouffioux, C., Duchene, L., Duflou, J. R., & Habraken, A. (2007). Validation of a new finite element for incremental forming simulation using a dynamic explicit approach. Key Engineering Materials [=KEM], 344, 495-502.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 100 (16 ULiège) ; downloaded: 142 (8 ULiège) — SCOPUS®: 14 (10 sans les autocitations)
Flores, P., Duchene, L., Bouffioux, C., Lelotte, T., Henrard, C., Pernin, N., Van Bael, A., He, S., Duflou, J., & Habraken, A. (2007). Model Identification and FE Simulations Effect of Different Yield Loci and Hardening Laws in Sheet Forming. International Journal of Plasticity, 23(3), 420-449.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 128 (20 ULiège) ; downloaded: 467 (13 ULiège) — SCOPUS®: 57 (40 sans les autocitations)
IF 2007: 4.516; last: 5.623; IF5: 6.23 — EigenF 2007: 0.013; last: 0.016 — Article Infl. 2007: 1.3; last: 1.9

3.b. À portée nationale

En tant que co-auteur

Guzman, C. F., Yuan, S., Duchene, L., Flores, E. I. S., & Habraken, A. (2017). Damage prediction in single point incremental forming using an extended Gurson model. International Journal of Solids and Structures.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 26 (10 ULiège) ; downloaded: 25 (7 ULiège) — SCOPUS®: 0
IF 2017: ?; last: 2.081; IF5: 2.56 — EigenF: — Article Infl.:

6. Chapitres et parties d’ouvrages collectifs

6.a. Chapitres

Duchene, L., & Habraken, A. (2007). Multiscale Approaches. In F., Chinesta & E., Cueto, Advances in Material Forming - Esaform 10 years on (pp. 125-141).
ORBi viewed: 37 (11 ULiège) ; downloaded: 138 (12 ULiège) — SCOPUS®: 0
Habraken, A., Duchene, L., Godinas, A., & Cescotto, S. (2001). Anisotropic elastoplastic model based on texture. Handbook of materials behavior models.
ORBi viewed: 18 (9 ULiège) ; downloaded: 10 (6 ULiège) — SCOPUS®: -

8. Conférences scientifiques dans des universités et centres de recherche

Tuninetti, V., Yuan, S., Gilles, G., Guzmán Inostroza, C. F., Habraken, A., & Duchene, L. (2016, September). Modeling the ductile fracture and the plastic anisotropy of DC01 steel at room temperature and low strain rates. Paper presented at NUMISHEET 2016 - The 10th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Bristol, UK.
ORBi viewed: 86 (16 ULiège) ; downloaded: 27 (7 ULiège) — SCOPUS®: -
Tran, H. S., Brusten, R., Paydas, H., Duchene, L., Tomé Jardin, R. A., Lecomte-Beckers, J., & Habraken, A. (2016, May 20). 3-D finite element analysis of laser cladding process. Application to Ti-6Al-4V. Paper presented at International conference on COmputational methods in Manufacturing Processes (ICOMP’2016), Liege, Belgium.
ORBi viewed: 56 (14 ULiège) ; downloaded: 127 (16 ULiège)
Guzmán Inostroza, C. F., Sena, J. I., Duchene, L., & Habraken, A. (2013, September 11). Accurate Single Point Incremental Forming Simulations using Solid-Shell Elements. Paper presented at First International Workshop on the Finite Element Code LAGAMINE (LAGASHOP 2013), Liège, Belgium.
ORBi viewed: 74 (21 ULiège) ; downloaded: 67 (11 ULiège) — SCOPUS®: -
Velosa De Sena, J., Guzmán Inostroza, C. F., Duchene, L., Habraken, A., Alves de Sousa, R. J., & Angelo Valente, R. (2013, September 11). Adaptive remeshing technique for the single incremental forming simulations using solid-shell elements. Paper presented at First International Workshop on the Finite Element Code LAGAMINE.
ORBi viewed: 76 (30 ULiège) ; downloaded: 79 (12 ULiège) — SCOPUS®: -

9. Colloques et congrès scientifiques

9.a. Sur invitation

À portée internationale

Habraken, A., Duchene, L., Bouffioux, C., & Canales Cardenas, C. (2017, May 03). OPTIBRI Opening and Project Overview. Paper presented at Design Guidelines for Optimal Use of HSS in Bridges - OptiBri Workshop, Stuttgart, Germany.
Peer reviewed
ORBi viewed: 13 (2 ULiège) ; downloaded: 14 (2 ULiège)
Tran, H. S., Brusten, R., Jardin, R., Paydas, H., Carrus, R., Duchene, L., Lecomte-Beckers, J., & Habraken, A. (2016, November 03). Laser Cladding Finite Element Modelling Application to Ti6Al4V. Paper presented at IAP INTEMATE Plenary session meeting, Gent, Belgique.
ORBi viewed: 38 (12 ULiège)
Tran, H. S., Duchene, L., Tummala, H., Peron Luhrs, V., Fivel, M., & Habraken, A. (2016, September 07). Quasicontinuum analysis of interaction between screw dislocation and coherent twin boundary. Paper presented at 15th European Mechanics of Materials Conference, Brussels, Belgium.
ORBi viewed: 44 (7 ULiège) ; downloaded: 29 (3 ULiège)
Hoang, S. T., Tummala, H., Duchene, L., Péron Luhrs, V., Fivel, M., & Habraken, A. (2015). Interaction between dislocation and coherent twin boundary by quasicontinuum model. Proceedings of XIII International Conference on Computational Plasticity. Fundamentals and Applications COMPLAS ebook open accesss XIII.
Peer reviewed
ORBi viewed: 25 (4 ULiège) — SCOPUS®: 0
Velosa De Sena, J., Duchene, L., Habraken, A., Angelo Valente, R., & Alves de Sousa, R. J. (2014). Numerical Simulation of a Conical Shape Made by Single Point Incremental Forming. Incremental sheet forming.
Peer reviewed
ORBi viewed: 67 (27 ULiège) ; downloaded: 40 (10 ULiège) — SCOPUS®: -
Velosa De Sena, J., Guzmán Inostroza, C. F., Duchene, L., Habraken, A., Angelo Valente, R., & Alves de Sousa, R. J. (2014). Numerical Simulation of a Conical Shape Made By Single Point Incremental. Incremental sheet forming.
Peer reviewed
ORBi viewed: 71 (26 ULiège) ; downloaded: 96 (18 ULiège) — SCOPUS®: -

À portée nationale

Velosa De Sena, J., Duchene, L., Habraken, A., Angelo Valente, R., & Alves de Sousa, R. J. (2013, June 27). Single Point Incremental Forming using Adaptive Remeshing Technique with Solid-Shell Finite Elements. Paper presented at Cogress on Numerical Methods in Engineering CNME, Bilbao, Spain.
Peer reviewed
ORBi viewed: 33 (17 ULiège) ; downloaded: 59 (14 ULiège) — SCOPUS®: -

9.b. Sur proposition personnelle

Publiées

À portée internationale
Avec peer reviewing
Morch, H., Duchene, L., & Habraken, A. (2017). Visco-plastic Chaboche model for nickel-based alloys under anisothermal cyclic loading. Proceedings of the XIV International Conference on Computational Plasticity.
Peer reviewed
ORBi viewed: 33 (10 ULiège) ; downloaded: 32 (4 ULiège)
marandi, K., vayrette, R., Pardoen, T., Duchene, L., & Habraken, A. (2013). Bauschinger effect in thin metallic films by Fem simulations. XII International Conference on Computational Plasticity. Fundamentals and Application COMPLAS XII , Barcelone 3-5 septembre 2013.
Peer reviewed
ORBi viewed: 86 (9 ULiège) ; downloaded: 6 (6 ULiège) — SCOPUS®: 0
Duchene, L., Ben Bettaieb, A., Tuninetti Vásquez, V., & Habraken, A. (2013). Numerical modeling and digital image correlation strain measurements of coated metal sheets submitted to large bending deformation. Proceedings of the 16th ESAFORM conference on Material Forming.
Peer reviewed
ORBi viewed: 120 (48 ULiège) ; downloaded: 116 (31 ULiège) — SCOPUS®: -
Gilles, G., Habraken, A., Cazacu, O., Balan, T., & Duchene, L. (2013). Experimental and numerical study of TA6V mechanical behavior under different quasi-static strain paths at room temperature. AIP Conference Proceedings, 1532, 651-656.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 64 (17 ULiège) ; downloaded: 9 (9 ULiège) — SCOPUS®: 1 (0 sans les autocitations)
Duchene, L., Ben Bettaieb, A., & Habraken, A. (2011). Assessment of the enhanced assumed strain (EAS) and the assumed natural strain (ANS) techniques in the mechanical behavior of the SSH3D solid-shell element. Complas XI.
Peer reviewed
ORBi viewed: 96 (33 ULiège) ; downloaded: 15 (11 ULiège) — SCOPUS®: 4 (0 sans les autocitations)
Ben Bettaieb, A., Duchene, L., Zhang, L., & Habraken, A. (2011). New Solid-Shell Finite Element Based on EAS and ANS Concepts for Sheet Metal Forming. AIP Conference Proceedings, 1383, 374-381.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 136 (25 ULiège) ; downloaded: 13 (11 ULiège) — SCOPUS®: 1 (0 sans les autocitations)
Verleysen, P., Peirs, J., & Duchene, L. (2011). Determination of the high strain rate forming properties of steel sheet. Complas XI.
Peer reviewed
ORBi viewed: 77 (2 ULiège) ; downloaded: 0 — SCOPUS®: 1 (1 sans les autocitations)
Gilles, G., Tuninetti Vásquez, V., Ben Bettaieb, M., Cazacu, O., Habraken, A., & Duchene, L. (2011). Experimental characterization and constitutive modeling of TA6V mechanical behavior in plane strain state at room temperature. AIP Conference Proceedings, 1383.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 102 (43 ULiège) ; downloaded: 17 (17 ULiège) — SCOPUS®: 1 (0 sans les autocitations)
Hammami, W., Tirry, W., Coghe, F., Duchene, L., Delannay, L., & Habraken, A. (2011). Ti6A14V Anisotropy and Texture Evolution Predictions Using Multisite and Self Consistent Crystal Plasticity Models. Proceedings of the 12th World conference on Titanium (pp. 950-953).
Peer reviewed
ORBi viewed: 103 (36 ULiège) ; downloaded: 8 (8 ULiège) — SCOPUS®: -
Ben Bettaieb, M., Van Hoof, T., Zhang, L., Minnebo, H., Dufour, P., Jacques, P. J., Duchene, L., & Habraken, A. (2011). Investigation of the Efficiency of the Ti555 Compared with TA6V Alloy in the Case of an Aeronautic Application. Proceedings of the 12th World Conference on Titanium (pp. 1969-1973).
Peer reviewed
ORBi viewed: 160 (4 ULiège) — SCOPUS®: -
Ben Bettaieb, M., Van Hoof, T., Zhang, L., Minnebo, H., Dufour, P., Jacques, P. J., Duchene, L., & Habraken, A. (2011). Investigation of the efficiency of the Ti555 compared with TA6V alloy in the case of an aeronautic application. The 12th World Conference on Titanium Ti-2011.
Peer reviewed
ORBi viewed: 41 (11 ULiège) ; downloaded: 4 (4 ULiège) — SCOPUS®: -
Zhang, L., Ben Bettaieb, A., Habraken, A., & Duchene, L. (2010). Temperature wrinkling prediction in metal/polymer multilayer coatings. International Journal of Material Forming, 3(supplement 1), 559-562.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 138 (41 ULiège) ; downloaded: 15 (14 ULiège) — SCOPUS®: 3 (1 sans les autocitations)
IF 2010: -; last: 1.241; IF5: 0.882 — EigenF: — Article Infl.:
Marmi, A., Habraken, A., & Duchene, L. (2010). Multiaxial fatigue damage modeling of Ti6Al4V alloy. Proceedings of the ICMFF9 Conference.
Peer reviewed
ORBi viewed: 142 (25 ULiège) ; downloaded: 13 (12 ULiège) — SCOPUS®: -
Gilles, G., Habraken, A., & Duchene, L. (2010). Material parameter identification of Cazacu's model for Ti6Al4V using the simulated annealing algorithm. Materials Science Forum, 636-637, 1125-1130.
Peer reviewed
ORBi viewed: 127 (40 ULiège) ; downloaded: 10 (10 ULiège) — SCOPUS®: 3 (3 sans les autocitations)
Keller, C., Habraken, A., Hug, E., & Duchene, L. (2010). Miniaturization induced size effects: Experimental and numerical investigation of size effects linked to the miniaturization of metallic components. Scale transition for plastic crystalline and microstructured materials: from experiment to numerical modeling.
Peer reviewed
ORBi viewed: 143 (17 ULiège) ; downloaded: 6 (6 ULiège) — SCOPUS®: -
Rabahallah, F., Bouffioux, C., Duchene, L., Vanhove, H., Duflou, J. R., & Habraken, A. (2010). Optimized Remeshing for Incremental Forming Simulation. Proceedings of the Advances in Materials and Processing Technologies Conference.
Peer reviewed
ORBi viewed: 124 (24 ULiège) ; downloaded: 11 (10 ULiège) — SCOPUS®: -
Bouffioux, C., Pouteau, P., Duchene, L., Vanhove, H., Duflou, J. R., & Habraken, A. (2010). Material data identification to model the single point incremental forming process. International Journal of Material Forming, 3(Suppl. 1), 979-982.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 162 (39 ULiège) ; downloaded: 20 (12 ULiège) — SCOPUS®: 13 (8 sans les autocitations)
IF 2010: -; last: 1.241; IF5: 0.882 — EigenF: — Article Infl.:
Keller, C., Afteni, M., Banu, M., Habraken, A., Hug, E., Castagne, S., & Duchene, L. (2010). Influence of Surface Effect On Nickel Micro Deep Drawing Process. Proceeding of the Numiform 2010 conference (pp. 1025-1030). American Institute of Physics.
Peer reviewed
ORBi viewed: 70 (16 ULiège) ; downloaded: 16 (8 ULiège) — SCOPUS®: -
Gerday, A.-F., Ben Bettaieb, M., Pascon, F., Duchene, L., & Habraken, A. (2009). Numerical Modeling of Representative Cells of Ti-5553 Using Periodic Homogenization Technique. In E., Oñate & D. R. J., Owen (Eds.), Computational plasticity X. Fundamentals and applications.
Peer reviewed
ORBi viewed: 161 (39 ULiège) ; downloaded: 80 (18 ULiège) — SCOPUS®: 0
Ben Bettaieb, M., Lemoine, X., Duchene, L., & Habraken, A. (2009). The Role of Void Evolution on the bendability of Steel Sheets. In E., Oñate & D. R. J., Owen (Eds.), Computational plasticity X. Fundamentals and applications.
Peer reviewed
ORBi viewed: 149 (24 ULiège) ; downloaded: 90 (16 ULiège) — SCOPUS®: 0
Hammami, W., Bouvier, S., Duchene, L., Delannay, L., & Habraken, A. (2009). Crystal Plasticity Modelling of Monotonic Shear Tests on Pure Titanium. In E., Oñate & D. R. J., Owen (Eds.), Computational plasticity X. Fundamentals and applications.
Peer reviewed
ORBi viewed: 106 (30 ULiège) ; downloaded: 120 (13 ULiège) — SCOPUS®: 1 (0 sans les autocitations)
Hammami, W., Delannay, L., Duchene, L., & Habraken, A. (2009). Crystal plasticity prediction of Lankford coefficient using the MULTISITE model: influence of the critical resolved shear stresses. International Journal of Material Forming, 2(Supplément 1), 65 - 68.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 233 (47 ULiège) ; downloaded: 117 (17 ULiège) — SCOPUS®: 1 (0 sans les autocitations)
IF 2009: -; last: 1.241; IF5: 0.882 — EigenF: — Article Infl.:
Ben Bettaieb, M., Lemoine, X., Duchene, L., & Habraken, A. (2009). Study of the formability of steels. Proceedings of the International ESAFORM Conference 2009.
Peer reviewed
ORBi viewed: 108 (29 ULiège) ; downloaded: 6 (6 ULiège) — SCOPUS®: -
Li, X., Cescotto, S., & Duchene, L. (2008). Application of a three-field natural neighbour method in elastoplasticity. Proceedings of the 8th World Congress on Computational Mechanics (WCCM8).
Peer reviewed
ORBi viewed: 21 (2 ULiège) ; downloaded: 42 — SCOPUS®: -
Habraken, A., Gerday, A.-F., & Duchene, L. (2008). Multiscale finite element study of Ti-555. In Akhtar S. Khan, Babak Farrokh, M., Baig, A., Pandey, C., Meredith, S., Yu, & H., Liu (Eds.), Proceedings of the 14th International Symposium on Plasticity & Its Current Applications, Mechanics & Mechanisms of Finite Plastic Deformation (pp. 265-267). Neat Press.
Peer reviewed
ORBi viewed: 38 (10 ULiège) ; downloaded: 76 (7 ULiège) — SCOPUS®: -
Duchene, L., Geers, M. G. D., Brekelmans, W. A. M., Chen, E., Verlinden, B., & Habraken, A. (2008). Multiscale modeling of equal channel angular extruded aluminium with strain gradient crystal plasticity and phenomenological models. In A., Rollett (Ed.), Proceedings of the 15th International Conference on the Texture of Materials (ICOTOM-15).
Peer reviewed
ORBi viewed: 100 (6 ULiège) ; downloaded: 76 (4 ULiège) — SCOPUS®: -
Habraken, A., Gerday, A.-F., Diouf, B., & Duchene, L. (2007). Comparisons of FEM approaches modelling the metal plastic behaviour. In E., Cueto & F., Chinesta, Proceedings of the 10th ESAFORM Conference on Material Forming (pp. 1478-1483). Springer.
Peer reviewed
ORBi viewed: 53 (19 ULiège) ; downloaded: 68 (13 ULiège) — SCOPUS®: -
Duchene, L., Diouf, B., Lelotte, T., Flores, P., Bouvier, S., & Habraken, A. (2007). Study of axes rotation during simple shear tests on aluminium sheets. In J. M. A., César de Sa & A. D., Santos (Eds.), Proceedings of the 9th International Conference NUMIFORM 2007 (AIP Conference Proceedings 908, pp. 399-404).
Peer reviewed
ORBi viewed: 21 (3 ULiège) ; downloaded: 48 (3 ULiège) — SCOPUS®: -
Lelotte, T., Duchene, L., & Habraken, A. (2006). Fast method to predict an earing profile based on Lankford coefficients and yield locus. In C. A., Mota Soares (Ed.), Proceedings of the III European Conference on Computational Mechanics Solids (ECCM III). Dodrecht, Pays-Bas: Springer.
Peer reviewed
ORBi viewed: 75 (7 ULiège) ; downloaded: 85 (6 ULiège) — SCOPUS®: -
Duchene, L., de Montleau, P., & Habraken, A. (2006). Development and performance assessment of an improved 8-node mixed type FEM element. In N., Juster & A., Rosochowski (Eds.), Proceedings of the 9th International ESAFORM Conference on Material Forming (pp. 135-138). Krakow, Poland: Akapit.
Peer reviewed
ORBi viewed: 81 (13 ULiège) ; downloaded: 95 (8 ULiège) — SCOPUS®: -
Duchene, L., El Houdaigui, F., & Habraken, A. (2005). Finite element simulations of the swift effect. In P. F., Bariani (Ed.), Proceedings of the ICTP 2005 International Conference on Technology of Plasticity.
Peer reviewed
ORBi viewed: 64 (4 ULiège) ; downloaded: 100 (2 ULiège) — SCOPUS®: -
Duchene, L., de Montleau, P., El Houdaigui, F., Bouvier, S., & Habraken, A. (2005). Analysis of Texture Evolution and hardening Behavior during Deep drawing with an improved mixed type FEM Element. In L. M., Smith, F., Pourboghrat, J. W., Yoon, & T. B., Stoughton (Eds.), On the Cutting Edge of Technology, NUMISHEET 2005, 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (AIP Conference proceedings, Vol 778, pp. 409-414). Melville (New York), USA: American Institue of Physics (AIP).
Peer reviewed
ORBi viewed: 66 (7 ULiège) ; downloaded: 160 (5 ULiège) — SCOPUS®: -
El Houdaigui, F., Duchene, L., Habraken, A., Poortmans, S., & Verlinden, B. (2005). Anisotropic yield locus of ultrafine-grained aluminium produced by Equal Channel angular extrusion. In E., Onate & D. R. J., Owen (Eds.), Proceedings of the VIII International Conference on Computational Plasticity (COMPLAS VIII) (pp. 1170-1173).
Peer reviewed
ORBi viewed: 134 (19 ULiège) ; downloaded: 52 (4 ULiège) — SCOPUS®: 0
Flores, P., Duchene, L., Lelotte, T., Bouffioux, C., El Houdaigui, F., Van Bael, A., He, S., & Habraken, A. (2005). Model identification and FE simulations: effect of different yield loci and hardening laws in sheet forming. In L. M., Smith, F., Pourboghrat, J. W., Yoon, & T. B., Stoughton (Eds.), On the Cutting Edge of Technology NUMISHEET 2005, Proceedings of the 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (AIP Confernce Proceedings, Vol 778, pp. 371-381). Melville (New York), USA: American Institute of Physics (AIP).
Peer reviewed
ORBi viewed: 154 (10 ULiège) ; downloaded: 167 (5 ULiège) — SCOPUS®: -
Lelotte, T., Gerday, A.-F., Flores, P., Bouvier, S., Van Houtte, P., Habraken, A., & Duchene, L. (2005). Axes rotation during simple shear test: Measurement and predictions. In E., Oñate & D. R. J., Owen (Eds.), Proceedings of the VIII International Conference on Computational Plasticity (COMPLAS VIII).
Peer reviewed
ORBi viewed: 71 (20 ULiège) ; downloaded: 43 (5 ULiège) — SCOPUS®: 0
Duchene, L., Delannay, L., & Habraken, A. (2004). Finite element prediction of the swift effect based on Taylor-type polycrystal plasticity models. In S., Stören (Ed.), Proceedings of the 7th ESAFORM conference on Materials Forming (pp. 171-174). Norwegian University of Sciences and Technology.
Peer reviewed
ORBi viewed: 42 (4 ULiège) ; downloaded: 72 (3 ULiège) — SCOPUS®: -
Duchene, L., de Montleau, P., Bouvier, S., & Habraken, A. (2004). Deep drawing simulations with different polycrystalline models. In S., Gosh, J. M., Castro, & J. K., Lee (Eds.), Materials Processing and Design: Modeling, Simulation and Applications (NUMIFORM 2004) (pp. 588-593). American Institute of Physics AIP Conference Proceedings.
Peer reviewed
ORBi viewed: 47 (8 ULiège) ; downloaded: 65 (6 ULiège) — SCOPUS®: -
de Montleau, P., Duchene, L., Bouvier, S., Flores, P., & Habraken, A. (2004). Deep drawing process with different elasto-plastic law. In S., Stören (Ed.), Proceedings of the 7th ESAFORM conference on Material Forming (pp. 163-166). Norwegian University of Sciences and Technology.
Peer reviewed
ORBi viewed: 71 (9 ULiège) ; downloaded: 102 (9 ULiège) — SCOPUS®: -
Van Bael, A., He, S., Van Houtte, P., Delannay, L., Duchene, L., & Habraken, A. (2004). Finite-element simulations of cup drawing using the taylor and the lamel model. In S., Stören (Ed.), Proceedings of the 7th ESAFORM conference on Materials Forming (pp. 215-218). Norwegian University of Sciences and Technology.
Peer reviewed
ORBi viewed: 21 (4 ULiège) — SCOPUS®: -
Cescotto, S., Duchene, L., Pascon, F., & Habraken, A. (2003). Numerical modelling of metal forming - current practice and advanced applications. In V. P., Iu, L. N., Lamas, Y. P., Li, & K. M., Mok (Eds.), Computational Methods in Engineering and Science, lu et al. (eds), Proceedings of the 9th International Conference of enhancement and Promotion of Computing Methods for Engineering and Science (A.A. Balkema Publishers, pp. 25-36). Lisse: Swets & Zeitlinger.
Peer reviewed
ORBi viewed: 38 (5 ULiège) ; downloaded: 38 (6 ULiège) — SCOPUS®: -
Duchene, L., Godinas, A., Cescotto, S., & Habraken, A. (2003). Micro-macro analysis of steel sheet behaviour in finite element simulations. Application to deep-drawing process. Journal de Physique IV, 105.
Peer reviewed
ORBi viewed: 33 (5 ULiège) ; downloaded: 89 (4 ULiège) — SCOPUS®: 1 (0 sans les autocitations)
IF 2003: 0.319; last: -; IF5: - — EigenF: — Article Infl.:
de Montleau, P., Duchene, L., Flores, P., & Habraken, A. (2003). Numerical shear tests for different elasto-plastic laws. In E., Onate & D. R. J., Owen, Proceedings of the VII International Conference on Computational Plasticity (COMPLAS 2003). Barcelona, Spain: CIMNE.
Peer reviewed
ORBi viewed: 46 (10 ULiège) ; downloaded: 74 (8 ULiège) — SCOPUS®: -
Duchene, L., Godinas, A., Cescotto, S., & Habraken, A. (2002). Micro-macro analysis of steel sheet behaviour in finite element simulations. Application to deep-drawing process. In S., Cescotto, Proceedings of the Sixth European Mechanics of Materials Conference (EMMC6) Non Linear Mechanics of Anisotropic Materials (pp. 337-344).
Peer reviewed
ORBi viewed: 47 (9 ULiège) ; downloaded: 90 (4 ULiège) — SCOPUS®: -
Flores, P., Duchene, L., & Habraken, A. (2002). Texture analysis of cylindrical cup during deep-drawing process. In D. Y., Yang, S. I., Oh, H., Huh, & Y. H., Kim, Proceedings of the 5th international conference NUMISHEET 2002 (pp. 605-610).
Peer reviewed
ORBi viewed: 145 (7 ULiège) ; downloaded: 195 (5 ULiège) — SCOPUS®: -
Duchene, L., Habraken, A., & Godinas, A. (2001). Influence of steel anisotropy during deep-drawing process. In A., Habraken, Proceedings of the 4th international Conference ESAFORM (pp. 461-464).
Peer reviewed
ORBi viewed: 241 (4 ULiège) ; downloaded: 141 (5 ULiège) — SCOPUS®: -
Duchene, L., Godinas, A., Habraken, A., & Cescotto, S. (2001). Modelling of the micro-mechanical behaviour of steel sheets during deep-drawing. In J. R., Duflou, M., Geiger, H. J. J., Kals, B., Shirvani, & U. P., Singh, Proceedings of the 9th International Conference on Sheet Metal (pp. 631-638).
Peer reviewed
ORBi viewed: 30 (6 ULiège) ; downloaded: 23 (5 ULiège) — SCOPUS®: -
Duchene, L., Habraken, A., & Godinas, A. (2001). Implementation of a texture based interpolated yield locus in a FEM code. In Balkema, Proceedings of NUMIFORM 2001 (Simulation of Materials Processing: Theory, Methods and Applications) (pp. 203-208). Tokyo: Mori Editor.
Peer reviewed
ORBi viewed: 28 (6 ULiège) ; downloaded: 32 (4 ULiège) — SCOPUS®: -
Duchene, L., Godinas, A., Habraken, A., & Cescotto, S. (2001). Micro-mechanical analysis of steel sheet behaviour during deep-drawing. Proceedings of the First Asian-Pacific Congress on Computational Mechanics: APCOM 2001.
Peer reviewed
ORBi viewed: 25 (6 ULiège) — SCOPUS®: -
Wauters, M., Habraken, A., & Duchene, L. (2000). A fully coupled elasto-plastic damage model applied to anisotropic materials.
Peer reviewed
ORBi viewed: 44 (12 ULiège) ; downloaded: 76 (6 ULiège) — SCOPUS®: -
Duchene, L., Habraken, A., & Godinas, A. (2000). Validation of a FEM model coupled with texture applied to deep drawing process. Proceedings of the 3rd ESAFORM Conference on Material Forming (pp. 3 à IV-6). Stuttgart, Germany: Frits Editor.
Peer reviewed
ORBi viewed: 40 (9 ULiège) ; downloaded: 57 (11 ULiège) — SCOPUS®: -
Wauters, M., Habraken, A., & Duchene, L. (2000). A fully coupled elasto-plastic damage model applied to anisotropic materials. In J. L., Tassoulas (Ed.), Proceedings of the 14th Engineering Mechanics Conference (pp. 6).
Peer reviewed
ORBi viewed: 64 (20 ULiège) ; downloaded: 35 (5 ULiège) — SCOPUS®: -
Duchene, L., Habraken, A., & Cescotto, S. (1999). Elastoplastic anisotropic model based on texture analysis to simulate steel sheet behavior. 7th International Symposium on Plasticity.
Peer reviewed
ORBi viewed: 12 (6 ULiège) — SCOPUS®: -
Duchene, L., Godinas, A., & Habraken, A. (1999). Texture effects on steel sheet behaviour under large strain simulations. 12th International Conference on Texture of Materials (ICOTOM12).
Peer reviewed
ORBi viewed: 12 (5 ULiège) — SCOPUS®: -
Duchene, L., Godinas, A., & Habraken, A. (1999). Metal plastic behaviour linked to texture analysis and FEM method. 4th International Conference NUMISHEET 1999.
Peer reviewed
ORBi viewed: 21 (3 ULiège) — SCOPUS®: -
Habraken, A., Radu, J.-P., Duchene, L., Wauters, M., & Munhoven, S. (1998). Comparisons of anisotropic elastoplastic laws applied to steel sheet. International Conference NUMIFORM 1998.
Peer reviewed
ORBi viewed: 19 (10 ULiège) — SCOPUS®: -

Communications uniquement orales ou poster

À portée internationale
Bouffioux, C., Canales Cardenas, C., Duchene, L., Ponthot, J.-P., & Habraken, A. (2017, June). FATIGUE CRACK PROPAGATION IN HSS S690QL WELDED CONNECTIONS IN BRIDGES. Paper presented at 14th International Conference on Fracture - ICF14, Rhodes, Greece.
ORBi viewed: 38 (7 ULiège) ; downloaded: 19 (5 ULiège)
Bouffioux, C., Habraken, A., Duchene, L., & Canales Cardenas, C. (2017, May 03). Characterization of Fatigue Behaviour, from Material Science to Civil Engineering Applications. Paper presented at Design Guidelines for Optimal Use of HSS in Bridges - OptiBri Workshop, Stuttgart, Germany.
ORBi viewed: 28 (5 ULiège) ; downloaded: 7 (2 ULiège)
Keller, C., Hug, E., Duchene, L., & Habraken, A. (2015, January 04). Effect of stress path on the miniaturizatio size effect for nickel polycrystals. Paper presented at PLASTICITY, DAMAGE & FRACTURE 2015, Montego Bay, Jamaica.
ORBi viewed: 53 (16 ULiège) ; downloaded: 65 (4 ULiège) — SCOPUS®: -
Duchene, L., Marmi, A., & Habraken, A. (2014, September). Assessment of a multiscale fatigue damage model associated with stress gradient effects. Poster session presented at The 10th International Conference on Fatigue Damage of Structural Materials, Hyannis, USA.
ORBi viewed: 73 (13 ULiège) ; downloaded: 56 (7 ULiège) — SCOPUS®: -
de Sena, J. I., Duchene, L., Habraken, A., Alves de Sousa, R., & Valente, R. (2013, April 24). Adaptive remeshing strategies using solid-shell elements in the numerical simulation of incremental forming processes. Paper presented at ESAFORM 2013, Aveiro, Portugal.
ORBi viewed: 57 (12 ULiège) — SCOPUS®: -
Habraken, A., Gilles, G., Tuninetti Vásquez, V., Duchene, L., Hammami, W., delannay, L., bouvier, S., Bacroix, B., chauveau, T., & hug, E. (2013, January). Identification and validation of CRSS values for Ti6Al4V alloy. Paper presented at PLASTICITY 2013 , Symposium to honour Paul Van Houtte, BAHAMAS, ETATS UNIS.
ORBi viewed: 135 (29 ULiège) ; downloaded: 150 (17 ULiège) — SCOPUS®: -
Duchene, L., Ben Bettaieb, A., Zhang, L., & Habraken, A. (2010, September). Effect of the enhanced assumed strain technique on the wrinkling prediction of thin aluminum film coated sheets. Paper presented at SolMech conference, Warsaw, Poland.
Peer reviewed
ORBi viewed: 60 (39 ULiège) — SCOPUS®: -
Habraken, A., Hammami, W., Gilles, G., & Duchene, L. (2010, May). Multiscale approach to describe the mechanical behaviour of Ti6Al4V alloys. Paper presented at 4th European Conference on Computational Mechanics (Solids, Structures and Coupled Problems in Engineering), Paris, France.
Peer reviewed
ORBi viewed: 51 (29 ULiège) ; downloaded: 9 (5 ULiège) — SCOPUS®: -
Diarra, H., Gerday, A.-F., Ben Bettaieb, M., Pascon, F., Duchene, L., & Habraken, A. (2010). Study of the effects of α-grain proportion, shape and orientation on the mechanical behavior of Ti-5553 by FE simulations. Paper presented at Advances in Materials and Processing Technologies (AMPT 2010), Paris, France.
Peer reviewed
ORBi viewed: 73 (23 ULiège) ; downloaded: 79 (12 ULiège) — SCOPUS®: -
Gilles, G., Hammami, W., Libertiaux, V., Habraken, A., Cazacu, O., & Duchene, L. (2010). Experimental characterization and constitutive modeling of TA6V titanium mechanical behavior in tension and compression. Paper presented at 37th Solid Mechanics Conference, Warsaw, Poland.
Peer reviewed
ORBi viewed: 97 (37 ULiège) ; downloaded: 51 (12 ULiège) — SCOPUS®: -
Hammami, W., Duchene, L., Delannay, L., Bouvier, S., Coghe, F., Tirry, W., & Habraken, A. (2010). Critical resolved shear stresses and hardening parameter optimisation using crystal plasticity model for Ti6AL4V sheet based on simple tension tests & texture evolution. Paper presented at 2nd International Symposium Computational Mechanics of Polycrystals, Bad Honnef, Germany.
Peer reviewed
ORBi viewed: 72 (31 ULiège) — SCOPUS®: -
Duchene, L., Bouvier, S., & Habraken, A. (2009, September). Accurate earing profile prediction during deep drawing with microstructure based hardening and crystal plasticity models. Paper presented at International Conference on Material Modelling (ICMM 2009), Dortmund, Allemagne.
Peer reviewed
ORBi viewed: 65 (15 ULiège) — SCOPUS®: -

14. Allocutions et communications diverses

14.c. Allocutions diverses

Duchene, L. (2012). Approches multi-échelles et éléments finis Solid-Shell. Paper presented at Leçon inaugurale, Liège, Belgique.
ORBi viewed: 15 (6 ULiège) ; downloaded: 62 (5 ULiège) — SCOPUS®: -

14.d Autres

Habraken, A., Duchene, L., Bouffioux, C., & Canales Cardenas, C. (2017). Optimal use of High Strength Steel grades within bridge.
ORBi viewed: 38 (15 ULiège) ; downloaded: 17 (5 ULiège)