Publications et communications de Anne Habraken

LégendeIndices bibliométriques liés à la revue (pour celles dont l'ISSN a été indiqué par l'auteur) IF = Impact factor Thomson ISI. Sont indiqués : IF de l’année de publication et IF de la dernière édition du JCR (last), « ? » si pas encore connu d'ORBi ; « - »  si inexistant. IF5 : idem que IF mais pour une période de 5 ans (nouvel indice depuis 2009). EigenF = EigenFactor (voir : http://www.eigenfactor.org/). Article Infl. = Article Influence : EigenFactor divisé par le nombre d’articles publiés dans cette revue. En savoir plus ? http://orbi.ulg.ac.be/rpt#revIndices bibliométriques liés à l'article ORBi viewed = nombre total de visualisations de la référence sur ORBi (dont X en interne à l'ULiège). ORBi downloaded = nombre total de téléchargements du texte intégral via ORBi, y compris tirés à part. SCOPUS® = nombre de citations du document repérées par SCOPUS®. En savoir plus ? http://orbi.ulg.ac.be/rpt#art(Avertissement : en fonction des disciplines, certains indicateurs bibliométriques peuvent ne pas se révéler pertinents)__________________________________ , , etc: texte intégral du document disponible en Open Access , , etc: texte intégral du document disponible en accès restreint Peer reviewed (vérifié par ORBi) : l'information est présente dans la base ORBi des périodiques

1. Thèses et mémoires

1.b. Thèses de doctorat

3. Articles dans des revues scientifiques avec peer reviewing

3.a. À portée internationale

En tant que premier ou dernier auteur

Tran, H. S., Tchuindjang, J. T., Paydas, H., Mertens, A., Tomé Jardin, R. A., Duchene, L., Carrus, R., Lecomte-Beckers, J., & Habraken, A. (2017). 3D thermal finite element analysis of laser cladding processed Ti-6Al-4V part with microstructural correlations. Materials & Design, 128, 130-142.
Peer reviewed
ORBi viewed: 73 (28 ULiège) ; downloaded: 6 (6 ULiège) — SCOPUS®: 0
IF 2017: ?; last: 3.997; IF5: 4.023 — EigenF: — Article Infl.:
Neira Torres, I., Gilles, G., Tchuindjang, J. T., Flores, P., Lecomte-Beckers, J., & Habraken, A. (2015, November). FE modeling of the cooling and tempering steps of bimetallic rolling mill rolls. International Journal of Material Forming.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 40 (21 ULiège) ; downloaded: 38 (11 ULiège) — SCOPUS®: 0
IF 2015: 1.241; last: 1.241; IF5: 0.882 — EigenF 2015: ?; last: 0.003 — Article Infl. 2015: ?; last: 0.2
Balan, T., Lemoine, X., Maire, E., & Habraken, A. (2015, September). Implementation of a damage evolution law for dual-phase steels in Gurson-type models. Materials and Design, (88), 1213-1222.
Peer reviewed
ORBi viewed: 47 (8 ULiège) ; downloaded: 116 (2 ULiège) — SCOPUS®: 2 (2 sans les autocitations)
HUG, E., DUBOS, P. A., keller, C., Duchene, L., & Habraken, A. (2015). Size effects and temperature dependence on strain-hardening mechanisms in some face centered cubic materials. Mechanics of Materials, 91, 136-151.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 70 (5 ULiège) ; downloaded: 126 (6 ULiège) — SCOPUS®: 7 (5 sans les autocitations)
IF 2015: 2.636; last: 2.636; IF5: 2.812 — EigenF: — Article Infl.:
Tuninetti, V., Gilles, G., Pardoen, T., & Habraken, A. (2015). Anisotropy and tension-compression asymmetry modeling of the room temperature plastic response of Ti-6A1-4V. International Journal of Plasticity, 67, 53-68.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 92 (32 ULiège) ; downloaded: 15 (15 ULiège) — SCOPUS®: 15 (13 sans les autocitations)
IF 2015: 5.623; last: 5.623; IF5: 6.23 — EigenF 2015: ?; last: 0.016 — Article Infl. 2015: ?; last: 1.9
ben bettaieb, M., Van Hoof, T., Pardoen, T., dufour, P., Lenain, A., Pascal, J.-J., & Habraken, A. (2014). On the Elasto-viscoplastic behavior of the Ti5553 alloy. Materials Science & Engineering : A, 617, 97-109.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 73 (21 ULiège) ; downloaded: 6 (6 ULiège) — SCOPUS®: 0
IF 2014: 2.567; last: 2.647; IF5: 2.959 — EigenF 2014: 0.072; last: 0.072 — Article Infl. 2014: 0.8; last: 0.8
Hug, E., keller, C., & Habraken, A. (2014). Impact of metallurgical size effects on plasticity of thin metallic materials. Materials Science Forum, 783-786, 2290-2295.
Peer reviewed
ORBi viewed: 62 (19 ULiège) ; downloaded: 5 (5 ULiège) — SCOPUS®: 0
Tuninetti Vásquez, V., & Habraken, A. (2014). Impact of anisotropy and viscosity to model the mechanical behavior of Ti-6A1-4V alloy. Materials Science and Engineering: A, (605), 39-50.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 71 (26 ULiège) ; downloaded: 275 (15 ULiège) — SCOPUS®: 6 (3 sans les autocitations)
IF 2014: 2.567; last: 2.647; IF5: 2.959 — EigenF 2014: 0.072; last: 0.072 — Article Infl. 2014: 0.8; last: 0.8
Neira Torres, I., Gilles, G., Tchuindjang, J. T., Lecomte-Beckers, J., sinnaeve, M., & Habraken, A. (2014). Study of residual stresses in bimetallic work rolls. Advanced Materials Research, 996, 580-585.
Peer reviewed
ORBi viewed: 100 (31 ULiège) ; downloaded: 8 (8 ULiège) — SCOPUS®: 4 (1 sans les autocitations)
Fansi Tchonko, J., Balan, T., Lemoine, X., Maire, E., Landron, C., Bouaziz, O., Ben Bettaieb, M., & Habraken, A. (2013). Numerical investigation and experimental validation of physically-based advanced GTN model for DP steels. Materials Science & Engineering : A, 569, 1-12.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 112 (33 ULiège) ; downloaded: 95 (18 ULiège) — SCOPUS®: 10 (5 sans les autocitations)
IF 2013: 2.409; last: 2.647; IF5: 2.959 — EigenF 2013: 0.077; last: 0.072 — Article Infl. 2013: 0.7; last: 0.8
Duchene, L., Guzmán Inostroza, C. F., Behera, A. K., Duflou, J., & Habraken, A. (2013, March). Numerical simulation of a pyramid steel sheet formed by single point incremental forming using solid-shell finite elements. Key Engineering Materials [=KEM].
Peer reviewed (vérifié par ORBi)
ORBi viewed: 161 (69 ULiège) ; downloaded: 131 (35 ULiège) — SCOPUS®: 2 (0 sans les autocitations)
Ben bettaieb, M., Lenain, A., & Habraken, A. (2012). Static and fatigue characterization of the Ti5553 titanium alloy. Fatigue & Fracture of Engineering Materials & Structures, (36), 401-415.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 77 (5 ULiège) ; downloaded: 255 (8 ULiège) — SCOPUS®: -
IF 2012: 0.861; last: 1.838; IF5: 1.588 — EigenF 2012: 0.004; last: 0.004 — Article Infl. 2012: 0.5; last: 0.5
Bouffioux, C., Lequesne, C., Vanhove, H., Duflou, J. R., Pouteau, P., Duchene, L., & Habraken, A. (2011). Experimental and numerical study of an AlMgSc sheet formed by an incremental process. Journal of Materials Processing Technology, 211(11), 1684-1693.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 110 (32 ULiège) ; downloaded: 14 (14 ULiège) — SCOPUS®: 8 (7 sans les autocitations)
IF 2011: 1.783; last: 2.359; IF5: 2.748 — EigenF 2011: 0.037; last: 0.022 — Article Infl. 2011: 0.6; last: 0.8
Gerday, A.-F., Ben Bettaieb, M., Duchene, L., Clement, N., Diarra, H., & Habraken, A. (2011). Material behavior of the hexagonal alpha phase of a titanium alloy identified from nanoindentation tests. European Journal of Mechanics A : Solids, 30, 248-255.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 121 (31 ULiège) ; downloaded: 12 (11 ULiège) — SCOPUS®: 7 (7 sans les autocitations)
IF 2011: 1.484; last: 2.453; IF5: 2.467 — EigenF 2011: 0.006; last: 0.007 — Article Infl. 2011: 0.8; last: 0.8
Flores, P., Tuninetti Vásquez, V., Gilles, G., Gonry, P., Duchene, L., & Habraken, A. (2010). Accurate stress computation in plane strain tensile tests for sheet metal using experimental data. Journal of Materials Processing Technology, 210, 1772-1779.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 123 (56 ULiège) ; downloaded: 21 (21 ULiège) — SCOPUS®: 18 (11 sans les autocitations)
IF 2010: 1.57; last: 2.359; IF5: 2.748 — EigenF 2010: 0.038; last: 0.022 — Article Infl. 2010: 0.5; last: 0.8
Rossi, B., Degée, H., & Habraken, A. (2008). Analytical formulation for actual mechanical properties of stainless steel structural members. Steel Research International, 79(2), 265-272.
Peer reviewed
ORBi viewed: 102 (32 ULiège) ; downloaded: 6 (6 ULiège) — SCOPUS®: 0
IF 2008: 0.344; last: 1.021; IF5: 0.833 — EigenF 2008: 0.003; last: 0.005 — Article Infl. 2008: 0.2; last: 0.3
Duchene, L., Lelotte, T., Flores, P., Bouvier, S., & Habraken, A. (2008). Rotation of axes for anisotropic metal in FEM simulations. International Journal of Plasticity, (24), 397–427.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 88 (21 ULiège) ; downloaded: 171 (20 ULiège) — SCOPUS®: 22 (17 sans les autocitations)
IF 2008: 3.875; last: 5.623; IF5: 6.23 — EigenF 2008: 0.014; last: 0.016 — Article Infl. 2008: 1.4; last: 1.9
Duflou, J. R., Verbert, J., Belkassem, B., Gu, J., Sol, H., Henrard, C., & Habraken, A. (2008). Process window enhancement for single point incremental forming through multi-step toolpaths. CIRP Annals - Manufacturing Technology, (57), 253-256.
Peer reviewed
ORBi viewed: 122 (5 ULiège) ; downloaded: 434 (3 ULiège) — SCOPUS®: 87 (71 sans les autocitations)
IF 2008: 1.123; last: 2.492; IF5: 3.195 — EigenF 2008: 0.005; last: 0.009 — Article Infl. 2008: 0.3; last: 0.7
Schwartz, R., Castagne, S., & Habraken, A. (2007). Numerical study to identify the material parameters of a damage model. Computer Methods in Materials Science, 7(2), 237-242.
Peer reviewed
ORBi viewed: 97 (30 ULiège) ; downloaded: 69 (12 ULiège) — SCOPUS®: -
Castagne, S., Talamona, D., & Habraken, A. (2007). A damage constitutive law for steel elevated temperature. Identification of the parameters. International Journal of Material Processing, (1), 23-43.
Peer reviewed
ORBi viewed: 71 (9 ULiège) ; downloaded: 92 (8 ULiège) — SCOPUS®: -
Henrard, C., Bouffioux, C., Duchene, L., Duflou, J. R., & Habraken, A. (2007). Validation of a new finite element for incremental forming simulation using a dynamic explicit approach. Key Engineering Materials [=KEM], 344, 495-502.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 100 (16 ULiège) ; downloaded: 137 (8 ULiège) — SCOPUS®: 14 (10 sans les autocitations)
Flores, P., Duchene, L., Bouffioux, C., Lelotte, T., Henrard, C., Pernin, N., Van Bael, A., He, S., Duflou, J., & Habraken, A. (2007). Model Identification and FE Simulations Effect of Different Yield Loci and Hardening Laws in Sheet Forming. International Journal of Plasticity, 23(3), 420-449.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 123 (20 ULiège) ; downloaded: 464 (13 ULiège) — SCOPUS®: 57 (40 sans les autocitations)
IF 2007: 4.516; last: 5.623; IF5: 6.23 — EigenF 2007: 0.013; last: 0.016 — Article Infl. 2007: 1.3; last: 1.9
Charlier, R., & Habraken, A. (1990). Numerical Modelisation of Contact with Friction Phenomena by the Finite Element Method. Computers & Geotechnics, 9(n°1&2), 59-72.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 42 (13 ULiège) ; downloaded: 38 (2 ULiège) — SCOPUS®: -
IF 1990: ?; last: 1.705; IF5: 2.179 — EigenF 1990: -; last: 0.008 — Article Infl. 1990: -; last: 0.8

En tant que co-auteur

Velosa De Sena, J., Guzmán Inostroza, C. F., Duchene, L., Habraken, A., Behera, A. K., Duflou, J., Angelo Valente, R., & Alves de Sousa, R. J. (2016). Simulation of a two-slope pyramid made by SPIF using an adaptive remeshing method with solid-shell finite element. International Journal of Material Forming, 9(3), 259-434.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 73 (41 ULiège) ; downloaded: 140 (18 ULiège) — SCOPUS®: 2 (1 sans les autocitations)
IF 2016: ?; last: 1.241; IF5: 0.882 — EigenF: — Article Infl.:
Sena, J., Lequesne, C., Duchene, L., Habraken, A., Valente, R., & Alves de Sousa, R. (2016). Single point incremental forming simulation with adaptive remeshing technique using solid-shell elements. Engineering Computations International Journal for Computer- Aided Engineering and Software, 33(5), 1388-1421.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 28 (4 ULiège) ; downloaded: 94 (4 ULiège) — SCOPUS®: 1 (1 sans les autocitations)
IF 2016: ?; last: 0.691; IF5: 0.986 — EigenF: — Article Infl.:
ben bettaieb, A., Velosa de Sena, J. I., Alves de Sousa, R., Valente, R., Habraken, A., & Duchene, L. (2015). On the comparison of two solid-shell formulations based on in-plane reduced and full integration schemes in linear and non-linear applications. Finite Elements in Analysis and Design, 107, 44-59.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 25 (1 ULiège) ; downloaded: 27 (1 ULiège) — SCOPUS®: 2 (2 sans les autocitations)
IF 2015: 2.175; last: 2.175; IF5: 2.169 — EigenF: — Article Infl.:
Keller, C., Hug, E., Habraken, A., & Duchene, L. (2015). Effect of stress path on the miniaturization size effect for nickel polycrystals. International Journal of Plasticity, 64, 26-39.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 61 (28 ULiège) ; downloaded: 14 (14 ULiège) — SCOPUS®: 5 (3 sans les autocitations)
IF 2015: 5.623; last: 5.623; IF5: 6.23 — EigenF 2015: ?; last: 0.016 — Article Infl. 2015: ?; last: 1.9
Gilles, G., Habraken, A., & Duchene, L. (2014). Experimental investigation and phenomenological modeling of the quasi-static mechanical behavior of TA6V titanium alloy. Key Engineering Materials [=KEM], 622-623, 1200-1206.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 57 (16 ULiège) ; downloaded: 10 (8 ULiège) — SCOPUS®: 0
Ben Bettaieb, M., Lemoine, X., Bouaziz, O., Habraken, A., & Duchene, L. (2011). Numerical modeling of damage evolution of DP steels on the basis of X-ray tomography measurements. Mechanics of Materials, 43(3), 139-156.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 113 (38 ULiège) ; downloaded: 19 (19 ULiège) — SCOPUS®: 13 (8 sans les autocitations)
IF 2011: 1.769; last: 2.636; IF5: 2.812 — EigenF 2011: 0.009; last: 0.008 — Article Infl. 2011: 1.1; last: 1.0
Ben Bettaieb, M., Lemoine, X., Bouaziz, O., Habraken, A., & Duchene, L. (2011). A finite element analysis of the bending and the bendability of metallic sheets. International Journal of Material Forming, 4(3), 283-297.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 64 (16 ULiège) ; downloaded: 12 (10 ULiège) — SCOPUS®: 0
IF 2011: -; last: 1.241; IF5: 0.882 — EigenF: — Article Infl.:
Marmi, A., Habraken, A., & Duchene, L. (2009). Multiaxial fatigue damage modelling at Macro scale of Ti6AL4V alloy. International Journal of Fatigue, 31, 2031-2040.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 176 (44 ULiège) ; downloaded: 404 (29 ULiège) — SCOPUS®: 28 (28 sans les autocitations)
IF 2009: 1.602; last: 2.162; IF5: 2.252 — EigenF 2009: 0.013; last: 0.012 — Article Infl. 2009: 0.7; last: 0.7
Poortmans, S., Boubakar, D., Habraken, A., & Verlinden, B. (2007). Correcting tensile test results of ECAE-deformed aluminium. Scripta Materialia, 56(9), 749-752.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 79 (6 ULiège) ; downloaded: 153 (7 ULiège) — SCOPUS®: 7 (6 sans les autocitations)
IF 2007: 2.481; last: 3.305; IF5: 3.436 — EigenF 2007: 0.059; last: 0.049 — Article Infl. 2007: 1.1; last: 1.2
Mosbah, P., Shima, S., Habraken, A., & Charlier, R. (1999). Numerical simulation of compacting process of a multi-stepped part – Comparison with experiments. Journal of the Japan Society of Powder and Powder Metallurgy, 46, 696-704.
Peer reviewed
ORBi viewed: 20 (3 ULiège) ; downloaded: 40 (1 ULiège) — SCOPUS®: 7 (3 sans les autocitations)

3.b. À portée nationale

En tant que premier ou dernier auteur

Guzman, C. F., Yuan, S., Duchene, L., Flores, E. I. S., & Habraken, A. (2017). Damage prediction in single point incremental forming using an extended Gurson model. International Journal of Solids and Structures.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 21 (9 ULiège) ; downloaded: 20 (6 ULiège) — SCOPUS®: 0
IF 2017: ?; last: 2.081; IF5: 2.56 — EigenF: — Article Infl.:

6. Chapitres et parties d’ouvrages collectifs

6.a. Chapitres

Habraken, A., Duchene, L., Godinas, A., & Cescotto, S. (2001). Anisotropic elastoplastic model based on texture. Handbook of materials behavior models.
ORBi viewed: 18 (9 ULiège) ; downloaded: 10 (6 ULiège) — SCOPUS®: -

8. Conférences scientifiques dans des universités et centres de recherche

Tuninetti, V., Yuan, S., Gilles, G., Guzmán Inostroza, C. F., Habraken, A., & Duchene, L. (2016, September). Modeling the ductile fracture and the plastic anisotropy of DC01 steel at room temperature and low strain rates. Paper presented at NUMISHEET 2016 - The 10th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Bristol, UK.
ORBi viewed: 84 (16 ULiège) ; downloaded: 25 (7 ULiège) — SCOPUS®: -
Habraken, A., & Guzmán Inostroza, C. F. (2016, February 09). About the Enhanced Formability of Single Point Incremental Forming. Paper presented at 4 th edition of the CFD and Thermomechanics Days 9 - 11 February 2016 (ARCELORMITTAL Europe and USA), Maizières Lés Metz, France.
ORBi viewed: 88 (10 ULiège) ; downloaded: 157 (5 ULiège)
Velosa De Sena, J., Guzmán Inostroza, C. F., Duchene, L., Habraken, A., Alves de Sousa, R. J., & Angelo Valente, R. (2013, September 11). Adaptive remeshing technique for the single incremental forming simulations using solid-shell elements. Paper presented at First International Workshop on the Finite Element Code LAGAMINE.
ORBi viewed: 75 (29 ULiège) ; downloaded: 75 (11 ULiège) — SCOPUS®: -

9. Colloques et congrès scientifiques

9.a. Sur invitation

À portée internationale

Habraken, A., Duchene, L., Bouffioux, C., & Canales Cardenas, C. (2017, May 03). OPTIBRI Opening and Project Overview. Paper presented at Design Guidelines for Optimal Use of HSS in Bridges - OptiBri Workshop, Stuttgart, Germany.
Peer reviewed
ORBi viewed: 12 (1 ULiège) ; downloaded: 13 (1 ULiège)
Tran, H. S., Tchuindjang, J. T., Hakan, P., Jardin, R., Carrus, R., Lecomte-Beckers, J., & Habraken, A. (2017). Thermal history modelling to understand microstructures observed in repair technology of Ti-6Al-4V. Extended Abstract book of 14th Conf. on Computer Methods in Materials Technology KomPlasTech 2017.
ORBi viewed: 64 (18 ULiège) ; downloaded: 9 (9 ULiège)
Tran, H. S., Brusten, R., Jardin, R., Paydas, H., Carrus, R., Duchene, L., Lecomte-Beckers, J., & Habraken, A. (2016, November 03). Laser Cladding Finite Element Modelling Application to Ti6Al4V. Paper presented at IAP INTEMATE Plenary session meeting, Gent, Belgique.
ORBi viewed: 34 (10 ULiège)
Tran, H. S., Duchene, L., Tummala, H., Peron Luhrs, V., Fivel, M., & Habraken, A. (2016, September 07). Quasicontinuum analysis of interaction between screw dislocation and coherent twin boundary. Paper presented at 15th European Mechanics of Materials Conference, Brussels, Belgium.
ORBi viewed: 43 (7 ULiège) ; downloaded: 23 (3 ULiège)
Habraken, A. (2016, September 06). Single Point Incremental Forming to increase material knowledge and production flexibility. Paper presented at 10th Int. Conf. and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes Numisheet 2016, Bristol, United Kingdom.
Peer reviewed
ORBi viewed: 17 (5 ULiège) ; downloaded: 4 (4 ULiège)
Jardin, R., Hoang, S. T., Hashemi, S. N., Lecomte-Beckers, J., Carrus, R., & Habraken, A. (2016). 2D and 3D FE models of laser cladding process. Booklet of the conference with extended abstract and short paper of less than 6 pages.
Peer reviewed
ORBi viewed: 46 (19 ULiège)
Neira Torres, I., Tchuindjang, J. T., Sinnaeve, M., Flores, P., Lecomte-Beckers, J., & Habraken, A. (2015). Determination of Stress and Strain Fields in Cast and Heat Treated Bimetallic Rolling Mill Rolls. Proceedings of the Iron & Steel Technology Conference and Exposition (AISTech 2015 & ICSTI) (pp. 2706-2716). Cleveland, Ohio, USA.
Peer reviewed
ORBi viewed: 114 (17 ULiège) ; downloaded: 5 (5 ULiège) — SCOPUS®: 0
Tchuindjang, J. T., Neira Torres, I., Habraken, A., Sinnaeve, M., & Lecomte-Beckers, J. (2014). Characterization of the Solidification Path, the Solid State Transformations and the Mechanical Behavior of a High Chromium Cast Steel. In T., Nylen (Other coll.), Proceedings of the 5th Abrasion Conference - 2014.
ORBi viewed: 47 (13 ULiège) ; downloaded: 4 (4 ULiège) — SCOPUS®: -
Velosa De Sena, J., Duchene, L., Habraken, A., Angelo Valente, R., & Alves de Sousa, R. J. (2014). Numerical Simulation of a Conical Shape Made by Single Point Incremental Forming. Incremental sheet forming.
Peer reviewed
ORBi viewed: 66 (26 ULiège) ; downloaded: 39 (9 ULiège) — SCOPUS®: -
Velosa De Sena, J., Guzmán Inostroza, C. F., Duchene, L., Habraken, A., Angelo Valente, R., & Alves de Sousa, R. J. (2014). Numerical Simulation of a Conical Shape Made By Single Point Incremental. Incremental sheet forming.
Peer reviewed
ORBi viewed: 70 (25 ULiège) ; downloaded: 92 (17 ULiège) — SCOPUS®: -
Habraken, A., & Collin, F. (2013). Finite element formulation and couplings. Paper presented at First International Workshop on the Finite Element COde LAGAMINE, Liège, Belgique.
Peer reviewed
ORBi viewed: 20 (3 ULiège) ; downloaded: 42 (6 ULiège) — SCOPUS®: -
Mathonet, V., Degée, H., Habraken, A., Tossings, P., & Delhez, E. (2004). Structural optimisation of steel frames for industrial applications. Proceedings of the Inverse Problems Design and Optimization Symposium.
Peer reviewed
ORBi viewed: 136 (19 ULiège) ; downloaded: 115 (12 ULiège) — SCOPUS®: -

À portée nationale

Delahaye, J., Rigo, O., Lecomte-Beckers, J., Habraken, A., Mertens, A., & Delahaye, J. (2017, June 28). Influence of Si precipitates on fracture mechanisms of AlSi10Mg parts processed by Selective Laser Melting. Paper presented at Workshop on Metal additive manufacturing, Louvain-la-Neuve, Belgique.
ORBi viewed: 64 (9 ULiège) ; downloaded: 1 (1 ULiège)
Hashemi, S. N., Tchuindjang, J. T., Dedry, O., Montrieux, H.-M., Carrus, R., Lecomte-Beckers, J., Habraken, A., & Mertens, A. (2017, June 28). Wear behaviour of laser clad High Speed Steels thick deposits. Paper presented at Workshop on Metal additive manufacturing, Louvain-la-Neuve, Belgique.
ORBi viewed: 45 (12 ULiège) ; downloaded: 2 (2 ULiège)
Velosa De Sena, J., Duchene, L., Habraken, A., Angelo Valente, R., & Alves de Sousa, R. J. (2013, June 27). Single Point Incremental Forming using Adaptive Remeshing Technique with Solid-Shell Finite Elements. Paper presented at Cogress on Numerical Methods in Engineering CNME, Bilbao, Spain.
Peer reviewed
ORBi viewed: 32 (16 ULiège) ; downloaded: 56 (13 ULiège) — SCOPUS®: -

9.b. Sur proposition personnelle

Publiées

À portée internationale
Avec peer reviewing
Morch, H., Duchene, L., & Habraken, A. (2017). Visco-plastic Chaboche model for nickel-based alloys under anisothermal cyclic loading. Proceedings of the XIV International Conference on Computational Plasticity.
Peer reviewed
ORBi viewed: 26 (7 ULiège) ; downloaded: 13 (2 ULiège)
Flipon, B., Lawrjaniec, D., Papeleux, L., Ponthot, J.-P., & Habraken, A. (2016). Numerical Simulations of a Two Roll Round Bar Straightener. AIP Conference Proceedings 1769, 120001 (2016) (pp. 6).
Peer reviewed
ORBi viewed: 19 (1 ULiège) ; downloaded: 1 (1 ULiège) — SCOPUS®: 0
Guzmán Inostroza, C. F., Tuninetti, V., Gilles, G., & Habraken, A. (2015). Assessment of damage and anisotropic plasticity models to predict Ti-6Al-4V behavior. Key Engineering Materials [=KEM], 651-653, 575-580.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 80 (12 ULiège) ; downloaded: 427 (9 ULiège) — SCOPUS®: 3 (3 sans les autocitations)
Lemoine, X., Tudor, B., & Habraken, A. (2014, October). Numerical investigation of cut-edge effect using the Gurson-Tvergaard-Needleman model. Procedia Engineering.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 71 (16 ULiège) ; downloaded: 5 (4 ULiège) — SCOPUS®: 0
Gilles, G., Tuninetti Vásquez, V., Ben Bettaieb, M., Cazacu, O., Habraken, A., & Duchene, L. (2011). Experimental characterization and constitutive modeling of TA6V mechanical behavior in plane strain state at room temperature. AIP Conference Proceedings, 1383.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 101 (43 ULiège) ; downloaded: 17 (17 ULiège) — SCOPUS®: 1 (0 sans les autocitations)
Keller, C., Schwartz, R., Bobadilla, M., Tchuindjang, J. T., Lecomte-Beckers, J., & Habraken, A. (2011). Towards the Prediction of Damage Of Peritectic Steels During Continuous Casting Process. AIP Conference Proceedings, 1353, 151-156.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 100 (36 ULiège) ; downloaded: 115 (13 ULiège) — SCOPUS®: 0
Lequesne, C., Pensis, O., Renard, M., Vanderheyden, S., & Habraken, A. (2011). Roller Pressure Quench Process of Steel Plate Modelling. Proceedings of Esaform 2011.
Peer reviewed
ORBi viewed: 104 (15 ULiège) ; downloaded: 11 (6 ULiège) — SCOPUS®: -
Studer, L., Detrembleur, S., Dewals, B., Pirotton, M., & Habraken, A. (2010). Modeling the vertical spincasting of large bimetallic rolling mill rolls. Key Engineering Materials [=KEM], 443, 15-20.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 77 (20 ULiège) ; downloaded: 10 (8 ULiège) — SCOPUS®: 0
Marmi, A., Habraken, A., & Duchene, L. (2010). Multiaxial fatigue damage modeling of Ti6Al4V alloy. Proceedings of the ICMFF9 Conference.
Peer reviewed
ORBi viewed: 142 (25 ULiège) ; downloaded: 13 (12 ULiège) — SCOPUS®: -
Gilles, G., Habraken, A., & Duchene, L. (2010). Material parameter identification of Cazacu's model for Ti6Al4V using the simulated annealing algorithm. Materials Science Forum, 636-637, 1125-1130.
Peer reviewed
ORBi viewed: 127 (40 ULiège) ; downloaded: 10 (10 ULiège) — SCOPUS®: 3 (3 sans les autocitations)
Rabahallah, F., Bouffioux, C., Duchene, L., Vanhove, H., Duflou, J. R., & Habraken, A. (2010). Optimized Remeshing for Incremental Forming Simulation. Proceedings of the Advances in Materials and Processing Technologies Conference.
Peer reviewed
ORBi viewed: 124 (24 ULiège) ; downloaded: 11 (10 ULiège) — SCOPUS®: -
Van Hoof, T., Ben Bettaieb, M., Lani, F., Dufour, P., Jacques, P., Lenain, A., & Habraken, A. (2010). Comparison of mechanical efficiency of two microstructures of Ti5553 alloy in the case of bolted flanges submitted to tensile loading. Steel Research International, 81(9), 1148-1152.
Peer reviewed
ORBi viewed: 112 (17 ULiège) ; downloaded: 8 (8 ULiège) — SCOPUS®: -
IF 2010: 0.455; last: 1.021; IF5: 0.833 — EigenF 2010: 0.004; last: 0.005 — Article Infl. 2010: 0.2; last: 0.3
Hammami, W., Delannay, L., Duchene, L., & Habraken, A. (2009). Crystal plasticity prediction of Lankford coefficient using the MULTISITE model: influence of the critical resolved shear stresses. International Journal of Material Forming, 2(Supplément 1), 65 - 68.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 231 (47 ULiège) ; downloaded: 113 (17 ULiège) — SCOPUS®: 1 (0 sans les autocitations)
IF 2009: -; last: 1.241; IF5: 0.882 — EigenF: — Article Infl.:
Studer, L., Detrembleur, S., Dewals, B., Pirotton, M., & Habraken, A. (2009). Modeling the Vertical Spincasting of Large Bimetallic Rolling Mill Rolls. In J., Ambrosio (Ed.), Proceedings of the 7th EUROMECH Solid Mechanics Conference.
Peer reviewed
ORBi viewed: 74 (14 ULiège) ; downloaded: 5 (3 ULiège) — SCOPUS®: -
Lequesne, C., Henrard, C., Bouffioux, C., Duflou, J., & Habraken, A. (2008). Adaptive remeshing for incremental forming simulation. In H., Pavel (Ed.), Proceedings of the 7th International Conference and Workshop on Numerical Simulation od 3D Sheet Metal Forming Processes (NUMISHEET 2008) (pp. 399-403). Zurich, Switzerland: ETH.
Peer reviewed
ORBi viewed: 272 (25 ULiège) ; downloaded: 198 (17 ULiège) — SCOPUS®: -
Verbert, J., Belkassem, B., Henrard, C., Habraken, A., Gu, J., Sol, H., & Duflou, J. R. (2008). Multi-Step toolpath approach to overcome forming limitations in single point incremental forming. In P., Boisse, Proceedings of the 11th International ESAFORM Conference on Material Forming (pp. 587-590). Springer.
Peer reviewed
ORBi viewed: 87 (6 ULiège) ; downloaded: 227 (5 ULiège) — SCOPUS®: 25 (24 sans les autocitations)
Bouffioux, C., Henrard, C., Eyckens, P., Aerens, R., Van Bael, A., Sol, H., Duflou, J. R., & Habraken, A. (2008). Comparison of the tests chosen for material parameter identification to predict single point incremental forming forces. In N., Asnafi (Ed.), Proceedings of the International Conference of International Deep Drawing Research Group (IDDRG 2008) (pp. 133-144).
Peer reviewed
ORBi viewed: 146 (20 ULiège) ; downloaded: 136 (13 ULiège) — SCOPUS®: -
Bouffioux, C., Eyckens, P., Henrard, C., Aerens, R., Van Bael, A., Sol, H., & Habraken, A. (2008). Identification of material parameters to predict Single Point Incremental Forming forces. International Journal of Material Forming.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 112 (20 ULiège) ; downloaded: 11 (10 ULiège) — SCOPUS®: 22 (16 sans les autocitations)
IF 2008: -; last: 1.241; IF5: 0.882 — EigenF: — Article Infl.:
Rossi, B., Habraken, A., & Pascon, F. (2007). On the evaluation of the through thickness residual stresses distribution of cold formed profiles. 10th International ESAFORM Conference on Material Forming : ESAFORM, Zaragoza, 18-20 April 2007 (pp. 570-577).
Peer reviewed
ORBi viewed: 101 (30 ULiège) ; downloaded: 310 (10 ULiège) — SCOPUS®: -
Lelotte, T., Rossi, B., & Habraken, A. (2007). Micro and macro investigation on the hardening of a titanium alloy. 11th World conference on titanium: Ti 2007, Kyoto 3-7 June 2007 (pp. 415-419).
Peer reviewed
ORBi viewed: 85 (35 ULiège) — SCOPUS®: -
Studer, L., Habraken, A., Pirotton, M., Pascon, F., & Dewals, B. (2007). Modelling the vertical centrifugal casting of large bimetallic rolling mills. In E., Onate, M., Papadrakis, & B., Schrefler (Eds.), Proceedings of the Conference of Computational Methods for Coupled Problems in Science and Engineering 2 (pp. 141-144). Barcelona, Spain: CIMNE.
Peer reviewed
ORBi viewed: 123 (10 ULiège) ; downloaded: 85 (7 ULiège) — SCOPUS®: -
Bouffioux, C., Henrard, C., Gu, J., Duflou, J., & Habraken, A. (2007). Development of an inverse method for identification of materials parameters in the single point incremental sheet forming process. In M., Tisza (Ed.), Proceedings of the IDDRG 2007 International Conference.
Peer reviewed
ORBi viewed: 117 (12 ULiège) ; downloaded: 79 (10 ULiège) — SCOPUS®: -
Viet, B. Q., Boman, R., Papeleux, L., Wouters, P., Kergen, R., Daolio, G., Duroux, P., Flores, P., Habraken, A., & Ponthot, J.-P. (2006). Springback and Twist Prediction of Roll Formed Parts. In A. D., Santos & A., Barata da Rocha (Eds.), Proceedings of the IDDRG 2006 International Deep Drawing Research Group, Drawing the things to come, Trends and Advances in Sheet Metal Forming (pp. 567-574).
Peer reviewed
ORBi viewed: 432 (32 ULiège) ; downloaded: 893 (22 ULiège)
Lequesne, C., Plumier, A., Degée, H., & Habraken, A. (2006). Numerical study of the fatigue crack in welded beam-to-column connection using cohesive zone model. Proceedings of the International Conference on Fracture and Damage Mechanics V (pp. 847-850). Uetikon-Zuerich, Switzerland: Trans Tech Publications.
Peer reviewed
ORBi viewed: 78 (16 ULiège) ; downloaded: 107 (9 ULiège) — SCOPUS®: -
Henrard, C., Bouffioux, C., Godinas, A., & Habraken, A. (2005). Development of a contact model adapted to incremental forming. In D., Banabic (Ed.), Proceedings of the 8th ESAFORM Conference on Material Forming (pp. 27-29). The publishing House of the Romanian Academy.
Peer reviewed
ORBi viewed: 102 (8 ULiège) ; downloaded: 118 (6 ULiège) — SCOPUS®: -
Bouffioux, C., Carton, M., Lecomte-Beckers, J., & Habraken, A. (2004). Study of the cooling process of an extruded aluminium profile. In S., Gosh, J. M., Castro, & J. K., Lee, Proceedings of Materials Processing and Design: Modeling, Simulation and Applications (NUMIFORM 2004) (pp. 1022-1027). American Institute of Physics AIP Conference Proceedings.
Peer reviewed
ORBi viewed: 82 (8 ULiège) ; downloaded: 164 (6 ULiège) — SCOPUS®: -
Pecquet, E., Volles, R., Lecomte-Beckers, J., & Habraken, A. (2004). Lingopti project: semi-continuous casting process of copper-nickel alloys. Proceedings of the 21st International Congress of Theoritical and Applied Mechanics. Warsaw, Pologne.
Peer reviewed
ORBi viewed: 96 (13 ULiège) ; downloaded: 53 (2 ULiège) — SCOPUS®: -
Pascon, F., & Habraken, A. (2003). 2D1/2 thermo-mechanical model of continuous casting using FEM. In V., Brucato (Ed.), Proceedings of the 6th International ESAFORM Conference on Material Forming. Nuova Ipsa editore.
Peer reviewed
ORBi viewed: 89 (7 ULiège) ; downloaded: 75 (4 ULiège) — SCOPUS®: -
Jeunechamps, P.-P., Walmag, J., Mathonet, V., Delhez, E., Habraken, A., Ponthot, J.-P., Tossings, P., & Duysinx, P. (2003). Identification of elastoplastic model parameters in large deformation problems using gamma methods. Proceedings of the 5th World Congress on Structural and Multidisciplinary Optimization.
Peer reviewed
ORBi viewed: 83 (18 ULiège) ; downloaded: 61 (7 ULiège) — SCOPUS®: -
Moto Mpong, S., de Montleau, P., Godinas, A., & Habraken, A. (2002). Acceleration of finite element analysis by parallel processing. In M., Pietrzyk, Z., Mitura, & J., Kaczmar (Eds.), Proceedings of the 5th international ESAFORM Conference on Material Forming (pp. 47-50). Kraków, Poland: Akapit.
Peer reviewed
ORBi viewed: 92 (13 ULiège) ; downloaded: 97 (12 ULiège) — SCOPUS®: -
Castagne, S., Charles, Habraken, A., Zhang, L., Gaspard, & Batazzi. (2000). Numerical Modelling of the Forging Process of Rolls for Rolling Mills. Proceedings of the 2nd International Conference on forging and related technology.
Peer reviewed
ORBi viewed: 24 (2 ULiège) ; downloaded: 29 (3 ULiège) — SCOPUS®: -
Charles, J. F., Habraken, A., & Lecomte-Beckers, J. (1999). Integration of recrystallisation model coupled with an elasto-visco-plastic law - Experimental tests and calibration of this model. Proceedings of the 2nd ESAFORM Conference on Material Forming (pp. 529-532). Guimaraes, Portugal.
Peer reviewed
ORBi viewed: 36 (2 ULiège) ; downloaded: 65 — SCOPUS®: -
Charles, J. F., Habraken, A., & Lecomte-Beckers, J. (1998). Modeling of elasto-viscoplastic behaviour of steels at high temperatures. In Baajens & Huetink (Ed.), Proceedings of Simulation of Materials Processing, Methods and Applications. Esaform (pp. 57-60). Rotterdam, Pays-Bas: Balkema.
Peer reviewed
ORBi viewed: 50 (3 ULiège) ; downloaded: 4 (1 ULiège) — SCOPUS®: -
Charles, J.-F., Habraken, A., & Lecomte-Beckers, J. (1998). An elasto-viscoplastic model for forging steel at high temperatures. Proceedings of NUMIFORM 98, Simulation of Materials Processing : Theory, Methods and Applications (pp. 277-282). Balkema, Enschede, The Netherlands: Huetink, Baaijens.
Peer reviewed
ORBi viewed: 15 (4 ULiège) — SCOPUS®: -
Mosbah, P., Bouvard, D., Habraken, A., & Charlier, R. (1997). Modelling of Compression and Ejection of Metal Powder: Comparison of Analytical and Numerical Methods. Proc. of the European Conference on Advances in Structural PM Component Production.
Peer reviewed
ORBi viewed: 12 — SCOPUS®: -
Habraken, A., Zhu, Y. Y., Charlier, R., & Wang, X. C. (1995). A damage model for elastoviscoplastic materials at large strains. Proc. of the Int. Conf. on Computational Plasticity, Fundamentals and Applications, COMPLAS.
Peer reviewed
ORBi viewed: 15 (2 ULiège) — SCOPUS®: -
Bille, J. P., Cescotto, S., Habraken, A., & Charlier, R. (1994). Numerical approach of contact using an augmented lagrangian method. 2nd Contact Mechanics Int. Symp., CMIS.
Peer reviewed
ORBi viewed: 25 (9 ULiège) — SCOPUS®: -
Argento, C., Bouvard, D., Stutz, P., Charlier, R., & Habraken, A. (1994). Numerical Simulation of Hot Isostatic Pressing of Metal Powder: Influence of Constitutive Equations. Acte du Powder Metallurgy World Congress.
Peer reviewed
ORBi viewed: 68 ; downloaded: 0 — SCOPUS®: -
Habraken, A., Radu, J.-P., & Charlier, R. (1992). Numerical approach of contact with friction between two bodies in large deformations. Proc. of the Contact Mechanics Int. Symp.
Peer reviewed
ORBi viewed: 9 (2 ULiège) — SCOPUS®: -
Cescotto, S., Habraken, A., Radu, J.-P., & Charlier, R. (1989). Some recent developments in computer simulation of metal forming processes. Proc. of the 9th Int. Conf. on Computer Methods in Mechanics, Vol. 4.
Peer reviewed
ORBi viewed: 21 (1 ULiège) — SCOPUS®: -
Cescotto, S., Grober, H., Charlier, R., & Habraken, A. (1987). Prévision des défauts de géométrie au cours du laminage à chaud des aciers. Proc. de la Conf. Int. sur les Méthodes de calculs pour la Prévision des Défauts de Mise en Forme.
Peer reviewed
ORBi viewed: 81 (1 ULiège) — SCOPUS®: -
Habraken, A., & Charlier, R. (1986). A three-dimensional finite element for the simulation of metal forming processes. Proc. of the 2nd Int. Conf. on Numerical Methods in Industrial Forming Processes.
Peer reviewed
ORBi viewed: 8 (3 ULiège) — SCOPUS®: 1 (1 sans les autocitations)
Charlier, R., & Habraken, A. (1986). On the modelling of tridimensional contact with friction problems in context of large displacements problems. Proc. of the 2nd Int. Conf. on Numerical Methods in Industrial Forming Processes.
Peer reviewed
ORBi viewed: 20 — SCOPUS®: -
Grober, H., Cescotto, S., Charlier, R., Bourdouxhe, M., & Habraken, A. (1985). Numerical simulation of metal forming processes. Proc. Int. Conf. on Nonlinear Mechanics.
Peer reviewed
ORBi viewed: 45 (6 ULiège) ; downloaded: 5 (3 ULiège) — SCOPUS®: -
À portée nationale
Flores, P., & Habraken, A. (2006). Caracterizacion del comportamiento elasto-plastico de placas metalicas.
Peer reviewed
ORBi viewed: 36 (12 ULiège) — SCOPUS®: -
Pecquet, E., Pascon, F., Lecomte-Beckers, J., & Habraken, A. (2003). Lingopti project: semi-continuous casting process of coper-nickel alloys. In E., Dick, J., Vierendeels, F., Cantrijn, G., Campion, & C., Lacor, Proceedings of the 6th national congress on theoretical and applied mechanics.
Peer reviewed
ORBi viewed: 135 (6 ULiège) ; downloaded: 159 (3 ULiège) — SCOPUS®: -
Charles, J. F., Castagne, S., Zhang, L., Habraken, A., & Cescotto, S. (2000). Numerical modelling of the forging process of rolls for rolling mills. Proceedings of the 5ème Congrès national belge, Mecanique théorique et appliquée (pp. 243-246).
Peer reviewed
ORBi viewed: 23 (5 ULiège) ; downloaded: 38 (2 ULiège) — SCOPUS®: -
Bille, J. P., Habraken, A., & Charlier, R. (1994). Numerical approach of contact using an augmented lagrangian method. Congrès National Belge de Mécanique Théorique et Appliquée.
Peer reviewed
ORBi viewed: 9 (1 ULiège) — SCOPUS®: -
Cescotto, S., Charlier, R., & Habraken, A. (1987). Simulation du formage des métaux par éléments finis. 1er Congrès National Belge de Mécanique Théorique et Appliquée.
Peer reviewed
ORBi viewed: 14 (1 ULiège) — SCOPUS®: -

Communications uniquement orales ou poster

À portée internationale
Delahaye, J., Mertens, A., Dedry, O., Rigo, O., Vertruyen, B., Lecomte-Beckers, J., Habraken, A., & Delahaye, J. (2017, September 21). Effect of solution treatment on the fracture mechanisms of AlSi10Mg parts produced by Selective Laser Melting. Poster session presented at European Congress and Exhibition on Advanced Materials and Processes (EUROMAT), Thessaloniki, Greece.
ORBi viewed: 34 (4 ULiège) ; downloaded: 0
Tomé Jardin, R. A., Tchuindjang, J. T., Paydas, H., Carrus, R., Mertens, A., Lecomte-Beckers, J., Habraken, A., & Tran, H. S. (2017, June 28). Thermal history modelling to understand microstructures observed in repair technology of Ti-6Al-4V. Paper presented at Workshop on metal additive manufacturing, Louvain-la-Neuve, Belgium.
ORBi viewed: 26 (6 ULiège) ; downloaded: 10 (1 ULiège)
Bouffioux, C., Canales Cardenas, C., Duchene, L., Ponthot, J.-P., & Habraken, A. (2017, June). FATIGUE CRACK PROPAGATION IN HSS S690QL WELDED CONNECTIONS IN BRIDGES. Paper presented at 14th International Conference on Fracture - ICF14, Rhodes, Greece.
ORBi viewed: 29 (7 ULiège) ; downloaded: 17 (5 ULiège)
Tomé Jardin, R. A., Tran, H. S., Hashemi, S. N., Lecomte-Beckers, J., Carrus, R., & Habraken, A. (2016, July 05). A 2D and 3D thermal model of powder injection laser cladding. Paper presented at NUMIFORM, Troyes, France.
Peer reviewed
ORBi viewed: 21 (2 ULiège) ; downloaded: 7 (1 ULiège)
Keller, C., Hug, E., Duchene, L., & Habraken, A. (2015, January 04). Effect of stress path on the miniaturizatio size effect for nickel polycrystals. Paper presented at PLASTICITY, DAMAGE & FRACTURE 2015, Montego Bay, Jamaica.
ORBi viewed: 53 (16 ULiège) ; downloaded: 61 (4 ULiège) — SCOPUS®: -
Canales Cardenas, C., Bussetta, P., Habraken, A., & Ponthot, J.-P. (2014). On the numerical simulation of sheet metal blanking process. Paper presented at 1st. International conference on COmputational methods in Manufacturing Processes (ICOMP'2014), Saint-Étienne, France.
ORBi viewed: 130 (27 ULiège) ; downloaded: 12 (12 ULiège)
Duchene, L., Ben Bettaieb, A., Zhang, L., & Habraken, A. (2010, September). Effect of the enhanced assumed strain technique on the wrinkling prediction of thin aluminum film coated sheets. Paper presented at SolMech conference, Warsaw, Poland.
Peer reviewed
ORBi viewed: 60 (39 ULiège) — SCOPUS®: -
Diarra, H., Gerday, A.-F., Ben Bettaieb, M., Pascon, F., Duchene, L., & Habraken, A. (2010). Study of the effects of α-grain proportion, shape and orientation on the mechanical behavior of Ti-5553 by FE simulations. Paper presented at Advances in Materials and Processing Technologies (AMPT 2010), Paris, France.
Peer reviewed
ORBi viewed: 73 (23 ULiège) ; downloaded: 77 (10 ULiège) — SCOPUS®: -
Gilles, G., Hammami, W., Libertiaux, V., Habraken, A., Cazacu, O., & Duchene, L. (2010). Experimental characterization and constitutive modeling of TA6V titanium mechanical behavior in tension and compression. Paper presented at 37th Solid Mechanics Conference, Warsaw, Poland.
Peer reviewed
ORBi viewed: 97 (37 ULiège) ; downloaded: 51 (12 ULiège) — SCOPUS®: -
À portée nationale
Guzmán Inostroza, C. F., & Habraken, A. (2014, December). On Damage Characterization of a Steel Sheet. Poster session presented at Encuentros ChileGlobal, Santiago, Chile.
ORBi viewed: 67 (10 ULiège) ; downloaded: 27 (8 ULiège) — SCOPUS®: -
Guzmán Inostroza, C. F., & Habraken, A. (2014, May 12). Fully implicit integration scheme for the GTN model. Poster session presented at IAP Plenary session spring meeting, Gent, Belgium.
ORBi viewed: 68 (7 ULiège) ; downloaded: 131 (5 ULiège) — SCOPUS®: -

11. Rapports

11.a. Rapports de recherche

Externes

Collin, F., Dewals, B., Elsen, C., Nguyen, F., Bastin, D., Habraken, A., Denoël, V., Franssen, J.-M., Teller, J., & Michel, F. (2015). Research Self-Evaluation Report of the Department ArGEnCo. Argenco.
ORBi viewed: 88 (18 ULiège) ; downloaded: 92 (39 ULiège) — SCOPUS®: -
Habraken, A., Bouffioux, C., Lequesne, C., Rosochowski, A., Rosochowska, M., Verlinden, B., Vidal, V., Ailinca, G., Duflou, J. R., Vanhove, H., Schmitz, A., & Pouteau, P. (2010). An Aluminium alloy improved by ECAP and formed by SPIF process – ALECASPIF (D/2010/1191/16). Brussels, Belgium: Belgian Science Policy.
ORBi viewed: 57 (8 ULiège) ; downloaded: 5 (4 ULiège) — SCOPUS®: -

Internes

Pietrapertosa, C., Habraken, A., & Jaspart, J.-P. (2005). Assemblage de tôles minces par clinchage en construction métallique. BM7820.
ORBi viewed: 33 ; downloaded: 48 (2 ULiège) — SCOPUS®: -

11.c. Autres rapports

Rossi, B., Gilles, G., Zolotas, E., & Habraken, A. (2011). Experimental investigations of the material behavior of Ti6Al4V titanium alloy.
ORBi viewed: 78 (12 ULiège) ; downloaded: 8 (7 ULiège) — SCOPUS®: -