Publications and communications of Nathalie Job

Books and journal issues published as editor or director

Heinrichs, B., Job, N., Lambert, S., & Léonard, A. (Eds.). (2019). The XIX International Sol-Gel Conference, Liège (Belgium) Sept 3-8, 2017, KEYNOTE, INVITED, AWARD and BEST ORAL AND POSTER PRESENTATIONS. Journal of Sol-Gel Science and Technology.

Job, N., & Ioannides, T. (Eds.). (2012). Catalysts - special issue 'Aerogel catalysts'. MDPI.

Book chapters or contributions to a collective book as author or co-author

Job, N. (2019). Carbon gels for electrochemical applications. In M. Prassas & M. Aegerter (Ed.), Organic and carbon gels: from laboratory synthesis to applications (pp. 149-189). Springer.

Olu, P.-Y., Zadick, A., Job, N., & Chatenet, M. (2017). Anode (electro)catalysts for direct borohydride and ammonia borane fuel cells. In T. Maiyalagan & S. Viswanathan (Eds.), Electrocatalysts for low temperature fuel cells. Fundamental and recent trends (pp. 317-346). Weinheim, Germany: Wiley-VCH. doi:10.1002/9783527803873.ch10

Zubizarreta, L., Gil-Agusti, M., Garcia., Quijano, A., Léonard, A., Job, N., Cifrain, M., Pilcher, F., Khomenko, V., Barsukov, V., Fadagar-Cosma, E., Gheorghe, I., Dooley, Ayyad, O., Gomez-Rodriguez, P., Tedjar, F., Weyhe, R., Vestin, K., barkler, L., ... Rossi., A. (2015). Development of novel SOlid Materials for high power Li polymer BATteries (SOMABAT). Recyclability of components. In E. Briec & B. Müller., Electric Vehicle Batteries: Moving from Research towards Innovation. Lecture notes on mobility (pp. 19-32). Springer International Publishing.

Chatenet, M., Job, N., & Maillard, F. (2013). Basics of PEMFC including the use of carbon-supported nanoparticles. In S. Suib (Ed.), New and future developments in catalysis. Catalysis by nanoparticles (pp. 401-423). Elsevier. doi:10.1016/B978-0-444-53874-1.00018-4

Maillard, F., Job, N., & Chatenet, M. (2013). Approaches to synthesize carbon-supported platinum-based electrocatalysts for proton-exchange membrane fuel cells. In S. Suib (Ed.), New and future developments in catalysis. Batteries, hydrogen storage and fuel cells (pp. 407-428). Elsevier. doi:10.1016/B978-0-444-53880-2.00019-3

Heinrichs, B., Lambert, S., Job, N., & Pirard, J.-P. (2007). Sol-gel synthesis of supported metals. In J. R. Regalbuto (Ed.), Catalyst Preparation : Science and Engineering (pp. 163-208). Boca Raton, United States: CRC Press.

Articles accepted in reviewed journal

Deschamps, F., Mahy, J., Léonard, A., & Job, N. (March 2023). Rotating disk electrode measurements on low and high loading catalyst layers: Diffusion limitations and application to Pt catalysts supported on porous micrometric carbon xerogel particles designed for proton exchange membrane fuel cells. Journal of Electroanalytical Chemistry, 933, 117279. doi:10.1016/j.jelechem.2023.117279

Couto, L. D., Charkhgard, M., Karaman, B., Job, N., & Kinnaert, M. (15 January 2023). Lithium-ion battery design optimization based on a dimensionless reduced-order electrochemical model. Energy, 263, 125966. doi:10.1016/j.energy.2022.125966

Carabetta, J., & Job, N. (January 2021). Silicon-doped carbon xerogel with poly(sodium 4-styrenesulfonate) as a novel protective coating and binder. Microporous and Mesoporous Materials, 310, 110622. doi:10.1016/j.micromeso.2020.110622

Porthault, H., Calberg, C., Amiran, J., Martin, S., Pàez Martinez, C., Job, N., Heinrichs, B., Liquet, D., & Salot, R. (2021). Development of a thin flexible Li battery design with a new gel polymer electrolyte operating at room temperature. Journal of Power Sources, 482, 229055. doi:10.1016/j.jpowsour.2020.229055

Piedboeuf, M.-L., Job, N., Aqil, A., Busby, Y., Fierro, V., Celzard, A., Detrembleur, C., & Léonard, A. (21 July 2020). Understanding the influence of surface oxygen groups on the electrochemical behavior of porous carbons as anodes for lithium-ion batteries. ACS Applied Materials and Interfaces, 12, 36054-36065. doi:10.1021/acsami.0c08297

Léonard, A., Castro-Muniz, A., Suarez-Garcia, F., Job, N., & Paredes, J. (02 July 2020). Understanding the effect of the mesopore volume of ordered mesoporous carbons on their electrochemical behavior as Li-ion battery anodes. Microporous and Mesoporous Materials, 306, 110417. doi:10.1016/j.micromeso.2020.110417

Deschamps, F., Mahy, J., Léonard, A., Lambert, S., Dewandre, A., Scheid, B., & Job, N. (2020). A practical method to characterize Proton Exchange Membrane Fuel Cell catalyst layer topography: Application to two coating techniques and two carbon supports. Thin Solid Films, 695, 137751. doi:10.1016/j.tsf.2019.137751

Haye, E., Deschamps, F., Caldarella, G., Piedboeuf, M.-L., Lafort, A., Cornil, H., Colomer, J.-F., Pireaux, J.-J., & Job, N. (2020). Formable chromium nitride coatings for Proton Exchage Membrane Fuel Cell stainless steel bipolar plates. International Journal of Hydrogen Energy, 30, 15358-15365.

Haye, E., Job, N., Wang, Y., Penninckx, S., Stergiopoulos, V., Tumanov, N., Cardinal, M., Busby, Y., Colomer, J.-F., Su, B.-L., Pireaux, J.-J., & Houssiau, L. (2020). ZnO/Carbon xerogel photocatalysts by low-pressure plasma treatment, the role of the carbon substrate and its plasma functionalization. Journal of Colloids and Interface Science, 570, 312-321. doi:10.1016/j.jcis.2020.03.015

Pàez Martinez, C., Exantus, C., Dallel, D., Alié, C., Calberg, C., Liquet, D., Eskenazi, D., Deschamps, F., Job, N., & Heinrichs, B. (2019). Water-Based Paintable LiCoO2 Microelectrodes: A HighRate Li-Ion Battery Free of Conductive and Binder Additives. Advanced Materials Technologies, 1900499. doi:10.1002/admt.201900499

Asset, T., Gommes, C., Drnec, J., Bordet, P., Chattot, R., Martens, I., Nelayah, J., Job, N., Maillard, F., & Dubau, L. (2019). Disentangling the Degradation Pathways of Highly Defective PtNi/C Nanostructures - An Operando Wide and Small Angle X-ray Scattering Study. ACS Catalysis, 9, 160. doi:10.1021/acscatal.8b02665

Couto, L., Schorsch, J., Job, N., Léonard, A., & Kinnaert, M. (2019). State of health estimation for lithium ion batteries based on an equivalenthydraulic model: An iron phosphate application. Journal of Energy Storage, 21, 259-271. doi:10.1016/j.est.2018.11.001

Da Silva Pires, M., Haye, E., Zubiaur, A., Job, N., Pireaux, J.-J., Houssiau, L., & Busby, Y. (2019). Defective Pt-Ni/graphene nanomaterials by simultaneous or sequential treatments of organometallic precursors by low-pressure oxygen plasma. Plasma Processes and Polymers, 16, 1800203. doi:10.1002/ppap.201800203

Haye, E., Soon Chang, C., Dudek., T., Ghanbaja, J., Busby, Y., Job, N., Houssiau, L., & Pireaux., J.-J. (2019). Tuning the magnetism of plasma-synthesized iron nitride nanoparticles: application in pervaporative membranes. ACS Applied Nano Materials, 2, 2484-2493. doi:10.1021/acsanm.9b00385

Léonard, A., & Job, N. (2019). Safe and green Li-ion batteries based on LiFePO4 and Li4Ti5O12 sprayed as aqueous slurries with xanthan gum as a common binder. Materials Today Energy, 12, 168-178. doi:10.1016/j.mtener.2019.01.008

Lin, L., Xie, K., Beaucamp, M., Job, N., & Penhoat, M. (2019). Riboflavin as a bioorganic solar fuel: photo-redox chemistry rationalized and accelerated in a miniaturized flow photoreactor. ChemPhotoChem, 3, 198-203.

Navlani-Garcia, M., Salinas-Torres, D., Mori, K., Léonard, A., Kuwahara, Y., Job, N., & Yamashita, H. (2019). Insights on palladium decorated nitrogen-doped carbon xerogels for the hydrogen production from formic acid. Catalysis Today, 324, 90-96. doi:10.1016/j.cattod.2018.06.013

Piedboeuf, M.-L., Léonard, A., Reichenauer, G., Balzer, C., & Job, N. (2019). How do the micropores of carbon xerogels influence their electrochemical behavior as anodes for lithium-ion batteries? Microporous and Mesoporous Materials, 275, 278-287. doi:10.1016/j.micromeso.2018.08.029

Zubiaur, A., & Job, N. (2018). Streamlining of the synthesis process of Pt/carbon xerogel electrocatalysts with high Pt loading for the oxygen reduction reaction in proton exchange membrane fuel cells applications. Applied Catalysis B: Environmental. doi:10.1016/j.apcatb.2017.11.059

Alkarmo, W., Ouhib, F., Aqil, A., Thomassin, J.-M., Vertruyen, B., Piedboeuf, M.-P., Job, N., Detrembleur, C., & Jérôme, C. (April 2018). Continuous-porous N-doped carbon network as high-performance electrode for lithium-ion batteries. Journal of Materials Science, 53 (8), 6135-6146. doi:10.1007/s10853-017-1974-9

Alié, C., Calberg, C., Pàez Martinez, C., Liquet, D., Eskenazi, D., Heinrichs, B., & Job, N. (2018). Electrochemical performances of Li4Mn5O12 films prepared by spray-coated sol-gel reaction. Journal of Power Sources, 403, 173-183. doi:10.1016/j.jpowsour.2018.09.081

Asset, T., Chattot, R., Fontana, M., Mercier-Guyon, B., Job, N., Dubau, L., & Maillard, F. (2018). A review on recent developments and prospects for the oxygen reduction reaction on hollow Pt-alloy nanoparticles. Chemphyschem: A European Journal of Chemical Physics and Physical Chemistry, 19, 1552-1567. doi:10.1002/cphc.201800153

Asset, T., Job, N., Busby, Y., Crisci, A., Martin, V., Stergiopoulos, V., Bonnaud, C., Serov, A., Atanassov, P., Chattot, R., Dubau, L., & Maillard, F. (2018). Porous hollow PtNi/C electrocatalysts: carbon support considerations to meet performance and stability requirements. ACS Catalysis, 8, 893-903. doi:10.1021/acscatal.7b03539

Banerjee, R., Chen, D., Karakalos, S., Piedboeuf, M.-L., Job, N., & Regalbuto, J. (2018). Ambient oxidation of ultrasmall platinum nanoparticles on microporous carbon catalyst supports. ACS Applied Nano Materials, 1, 5876-5884. doi:10.1021/acsanm.8b01548

Eskenazi, D., Kreit, P., Pirard, J.-P., Compère, P., & Job, N. (2018). Toward a continuous synthesis of porous carbon xerogel beads. AIChE Journal, 64, 1049-1058. doi:10.1002/aic.16056

Haye, E., Busby, Y., da Silva Pires, M., Bocchese, F., Job, N., Houssiau, L., & Pireaux, J.-J. (2018). Low-pressure plasma synthesis of Ni/C nanocatalysts from solid precursors: influence of the plasma chemistry on the morphology and chemical state. ACS Applied Nano Materials, 1, 265-273. doi:10.1021/acsanm.7b00125

Salinas-Torres, D., Léonard, A., Stergiopoulos, V., Busby, Y., Pireaux, J.-J., & Job, N. (2018). Effect of nitrogen doping on the pore texture of carbon xerogels based on resorcinol-melamine-formaldehyde precursors. Microporous and Mesoporous Materials, 258, 190-198. doi:10.1016/j.micromeso.2017.08.004

Asset, T., Chattot, R., Drnec, J., Bordet, P., Job, N., Maillard, F., & Dubau, L. (2017). Elucidating the mechanisms driving the ageing of porous hollow PtNi/C nanoparticles by the means of COads stripping. ACS Applied Materials and Interfaces, 9, 25298-25307. doi:10.1021/acsami.7b05782

Piedboeuf, M.-L., Léonard, A., Deschamps, F., & Job, N. (May 2016). Carbon xerogels as model materials: toward a relationship between pore texture and electrochemical behavior as anodes for lithium-ion batteries. Journal of Materials Science, 51 (9), 4358-4370. doi:10.1007/s10853-016-9748-3

Asset, T., Chattot, R., Nelayah, J., Job, N., Dubau, L., & Maillard, F. (2016). Structure – Oxygen Reduction Reaction Activity Relation-ships in Porous Hollow PtNi/C Nanoparticles. ChemElectroChem, 3, 1591-1600. doi:10.1002/celc.201600300

Gheorghiu, C., Garcia-Bordeje, E., Job, N., & Roman-Martinez, M. C. (2016). Structured carbons as supports for hydrogenation hybrid catalysts prepared by the immobilization of a Rh diamine complex. Chemical Engineering Journal, 291, 47-54. doi:10.1016/j.cej.2016.01.071

Job, N. (2016). Les gels de carbone: de la maîtrise de la texture à l'amélioration de procédés. Chimie Nouvelle, 121, 1-16.

Merche, D., Dufour, T., Baneton, J., Caldarella, G., Debaille, V., Job, N., & Reniers, F. (2016). Synthesis of Platinum Nanoparticles on Carbon Powder for Fuel Cell Applications Using an Easy Atmospheric Plasma Approach. Belvac News, 55.

Merche, D., Dufour., T., Baneton, J., Caldarella, G., Debaille, V., Job, N., & Reniers, F. (2016). Fuel cell electrodes from organometallic platinum precursors: an easy atmospheric plasma approach. Plasma Processes and Polymers, 13, 91-104. doi:10.1002/ppap.201500157

Olu, P.-Y., Job, N., & Chatenet, M. (2016). Evaluation of anode (electro)catalytic materials for the direct borohydride fuel cell: methods and benchmarks. Journal of Power Sources, 327, 235-257. doi:10.1016/j.jpowsour.2016.07.041

Rey-Raap, N., Piedboeuf, M.-L., Arenillas, A., Menendez, J. A., Léonard, A., & Job, N. (2016). Aqueous and organic inks of carbon xerogels as models for studying the role of porosity in lithium-ion battery electrodes. Materials and Design, 109, 282-288. doi:10.1016/j.matdes.2016.07.007

Aqil, A., Vlad, A., Piedboeuf, M.-L., Aqil, M., Job, N., Melinte, S., Detrembleur, C., & Jérôme, C. (07 June 2015). A new design of organic radical batteries (ORBs): carbon nanotube buckypaper electrode functionalized by electrografting. Chemical Communications, 51 (45), 9301-9304. doi:10.1039/C5CC02420J

Piedboeuf, M.-L., Léonard, A., Traina, K., & Job, N. (03 March 2015). Influence of the textural parameters of resorcinol–formaldehyde dry polymers and carbon xerogels on particle sizes upon mechanical milling. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 471, 124-132. doi:10.1016/j.colsurfa.2015.02.014

Haghgoo, M., Yousefi, A. A., Mehr, M. J. Z., Léonard, A., Philippe, M., Compère, P., Léonard, A., & Job, N. (2015). Correlation between morphology and electrical conductivity of dried and carbonized multi-walled carbon nanotube/resorcinol–formaldehyde xerogel composites. Journal of Materials Science, 20, 6007-6020. doi:10.1007/s10853-015-9148-0

Job, N., Lambert, S., Zubiaur, A., Cao, C., & Pirard, J.-P. (2015). Design of Pt/carbon xerogel catalysts for PEM fuel cells. Catalysts, 5, 40-57. doi:10.3390/catal5010040

Olu, P.-Y., Bonnefont, A., Rouhet, M., Bozdech, S., Job, N., Chatenet, M., & Savinova, E. (2015). Insights into the potential dependence of the borohydride electrooxidation reaction mechanism on platinum nanoparticles supported on ordered carbon nanomaterials. Electrochimica Acta, 179, 637-646. doi:10.1016/j.electacta.2015.02.158

Olu, P.-Y., Deschamps, F., Caldarella, G., Chatenet, M., & Job, N. (2015). investigation of platinum and palladium as potential anodic catalysts for direct borohydride and ammonia borane fuel cells. Journal of Power Sources, 297, 492-503. doi:10.1016/j.jpowsour.2015.08.022

Ouhib, F., Aqil, A., Thomassin, J.-M., Malherbe, C., Gilbert, B., Svaldo-Lanero, T., Duwez, A.-S., Deschamps, F., Job, N., Vlad, A., Melinte, S., Jérôme, C., & Detrembleur, C. (07 October 2014). A facile and fast electrochemical route to produce functional few-layer graphene sheets for lithium battery anode application. Journal of Materials Chemistry A, 2 (37), 15298-15302. doi:10.1039/c4ta03139c

Zubiaur, A., Chatenet, M., Maillard, F., Lambert, S., Pirard, J.-P., & Job, N. (02 May 2014). Using the Multiple SEA Method to Synthesize Pt/Carbon Xerogel Electrocatalysts for PEMFC Applications. Fuel Cells From Fundamentals to Systems, 14 (3), 343-349. doi:10.1002/fuce.201300208

Cao Chongjiang, Yang Guang, Dubau Laetitia, Maillard Frédéric, Lambert, S., Pirard, J.-P., & Job, N. (2014). Highly dispersed Pt/C catalysts prepared by the Charge Enhanced DryImpregnation method. Applied Catalysis B: Environmental, 150-151, 101-106. doi:10.1016/j.apcatb.2013.12.004

Haghgoo, M., Yousefi, A. A., Zohouriaan Mehr, M. J., Fierro, V., Celzard, A., Léonard, A., Léonard, A., & Job, N. (2014). Characterization of multi-walled carbon nanotube dispersion in resorcinol-formaldehyde aerogel. Microporous and Mesoporous Materials, 184, 97-104. doi:10.1016/j.micromeso.2013.10.002

Laurent-Brocq, M., Job, N., Eskenazi, D., & Pireaux, J.-J. (2014). Pt/C catalyst for PEM fuel cells: Control of Pt nanoparticles characteristics through a novel plasma deposition method. Applied Catalysis B: Environmental, 147, 453-463. doi:10.1016/j.apcatb.2013.06.021

Léonard, A., Gommes, C., Piedboeuf, M.-L., Pirard, J.-P., & Job, N. (2014). Rapid aqueous synthesis of ordered mesoporous carbons: Investigation of synthesis variables and application as anode materials for Li-ion batteries. Microporous and Mesoporous Materials, 195, 92-101. doi:10.1016/j.micromeso.2014.04.028

Mager, N., Meyer, N., Léonard, A., Job, N., Devillers, M., & Hermans, S. (2014). Functionalization of carbon xerogels for the preparation of palladium supported catalysts applied in sugar transformations. Applied Catalysis B: Environmental, 148-149, 424-435. doi:10.1016/j.apcatb.2013.11.028

Olu, P.-Y., Barros, C., Job, N., & Chatenet, M. (2014). Electrooxidation of NaBH4 in alkaline medium on well-defined Pt nanoparticles deposited onto flat glassy carbon substrate: evaluation of the effects of Pt nanoparticle size, inter-particle distance and loading. Electrocatalysis, 5, 288-300. doi:10.1007/s12678-014-0195-0

Olu, P.-Y., Gilles, B., Job, N., & Chatenet, M. (2014). Influence of the surface morphology of smooth platinum electrodes for the sodium borohydride oxidation reaction. Electrochemistry Communications, 43, 47-50. doi:10.1016/j.elecom.2014.02.018

Job, N., Chatenet, M., Berthon-Fabry, S., Hermans, S., & Maillard, F. (2013). Efficient Pt/carbon electrocatalysts for Proton Exchange Membrane fuel cells: avoid chloride-based Pt salts ! Journal of Power Sources, 240, 294-305. doi:10.1016/j.jpowsour.2013.03.188

Job, N. (2012). Mass transport in carbon gels with tuned porosity. Spanish Carbon Group Bulletin.

Haghgoo, M., Plougonven, E., Yousefi, A. A., Pirard, J.-P., Léonard, A., & Job, N. (2012). Use of X-ray microtomography to study the homogeneity of carbon nanotube aqueous suspensions and carbon nanotube/polymer composites. Carbon, 50 (4), 1703-1706. doi:10.1016/j.carbon.2011.11.031

Ouattara-Brigaudet, M., Berthon-Fabry, S., Beauger, C., Chatenet, M., Job, N., Sennour, M., & Achard, P. (2012). Influence of the carbon texture of platinum/carbon aerogel electrocatalysts on their behaviour in a Proton Exchange Membrane Fuel Cell cathode. International Journal of Hydrogen Energy, 37, 9742-9757. doi:10.1016/j.ijhydene.2012.03.085

Páez Martínez, C., Contreras, M. S., Léonard, A., Blacher, S., Olivera-Fuentes, C. G., Pirard, J.-P., & Job, N. (2012). Effect of CO2 activation of carbon xerogels on the adsorption of methylene blue. Adsorption, 18 (3-4), 199-211. doi:10.1007/s10450-012-9394-2

Almazan Almazan, M. D. C., Léonard, A., Job, N., López-Garzón, J., Pirard, J.-P., & Blacher, S. (2011). Three-dimensional void space structure of activated carbon packed beds. Journal of Porous Materials, 18, 761–766. doi:10.1007/s10934-010-9438-5

Pirard, S., Diverchy, C., Hermans, S., Devillers, M., Pirard, J.-P., & Job, N. (2011). Kinetics and diffusional limitations in nanostructured heterogeneous catalyst with controlled pore texture. Catalysis Communications, 12, 441-445. doi:10.1016/j.catcom.2010.11.002

Contreras, M. S., Páez, C. A., Zubizarreta, L., Léonard, A., Blacher, S., Olivera-Fuentes, C. G., Arenillas, A., Pirard, J.-P., & Job, N. (September 2010). A comparison of physical activation of carbon xerogels with carbon dioxide with chemical activation using hydroxides. Carbon, 48 (11), 3157-3168. doi:10.1016/j.carbon.2010.04.054

Chatenet, M., Dubau, L., Job, N., & Maillard, F. (2010). The (electro)catalyst/membrane interface in the Proton Exchange Membrane Fuel Cell : similarities and differences with non-electrochemical Catalytic membrane Reactors. Catalysis Today, 156, 76-86. doi:10.1016/j.cattod.2010.02.028

Diverchy, C., Hermans, S., Job, N., Pirard, J.-P., & Devillers, M. (2010). Functionalization of carbon xerogels for the preparation of Pd/C catalysts by grafting of Pd complex. Studies in Surface Science and Catalysis, 175, 699-702. doi:10.1016/S0167-2991(10)75139-9

Gheorghiu, C. C., Perez-Cadenas, M., Roman-Martinez, M. C., Salinas-Martinez de Lecea, C., & Job, N. (2010). Immobilization of homogeneous catalysts in nanostructured carbon xerogels. Studies in Surface Science and Catalysis, 175, 647-651. doi:10.1016/S0167-2991(10)75128-4

Grzyb, B., Hildenbrand, C., Berthon-Fabry, S., Bégin, D., Job, N., Rigacci, A., & Achard, P. (2010). Functionalisation and chemical characterisation of cellulose derived carbon aerogels. Carbon, 48, 2297-2307. doi:10.1016/j.carbon.2010.03.005

Job, N., Lambert, S., Chatenet, M., Gommes, C., Maillard, F., Berthon-Fabry, S., Regalbuto, J. R., & Pirard, J.-P. (2010). Synthesis of highly loaded Pt/carbon xerogel catalysts for PEM fuel cells by the Strong Electrostatic Adsorption method. Catalysis Today, 150, 119-127. doi:10.1016/j.cattod.2009.06.022

Job, N., Maillard, F., Chatenet, M., Gommes, C., Lambert, S., Hermans, S., Regalbuto, J. R., & Pirard, J.-P. (2010). Synthesis and characterization of highly loaded Pt/carbon xerogel catalysts prepared by Strong Electrostatic Adsorption method. Studies in Surface Science and Catalysis, 175, 169-176. doi:10.1016/S0167-2991(10)75021-7

Micoud, F., Maillard, F., Bonnefont, A., Job, N., & Chatenet, M. (2010). The role of the support in COads monolayer electrooxidation on Pt nanoparticles : Pt/WOx vs. Pt/C. Physical Chemistry Chemical Physics, 12, 1182-1193. doi:10.1039/b915244j

Zubizarreta, L., Menendez, J. A., Job, N., Pis, J. J., Pirard, J.-P., Marco-Lozar, J. P., Linares-Solano, A., Cazorla-Amoros, D., & Arenillas, A. (2010). Ni-doped carbon xerogels for H2 storage. Carbon, 48, 2722-2733. doi:10.1016/j.carbon.2010.03.068

Escalona, I., Gommes, C., Job, N., Blacher, S., Olivera-Fuentes, C., Pirard, J.-P., & Léonard, A. (2009). Water desorption from resorcinol-formaldehyde hydrogels and adsorption in the resulting xerogels. Microporous and Mesoporous Materials, 117, 61-66. doi:10.1016/j.micromeso.2008.06.007

Job, N., Berthon-Fabry, S., Chatenet, M., Marie, J., Brigaudet, M., & Pirard, J.-P. (2009). Nanostructured carbons as catalyst supports for PEM fuel cell electrodes. Topics in Catalysis, 52, 2117-2122. doi:10.1007/s11244-009-9384-0

Job, N., Dardenne, A., & Pirard, J.-P. (2009). Silo flow-pattern diagnosis using the tracer method. Journal of Food Engineering, 91 (1), 118-125. doi:10.1016/j.jfoodeng.2008.08.010

Job, N., Maillard, F., Marie, J., Berthon-Fabry, S., Pirard, J.-P., & Chatenet, M. (2009). Electrochemical characterization of Pt/carbon xerogel and Pt/carbon aerogel catalysts - first insights into the influence of the carbon texture on the Pt nanoparticles morphology and catalytic activity. Journal of Materials Science, 44, 6591-6600. doi:10.1007/s10853-009-3581-x

Lambert, S., Job, N., D'Souza, L., Pereira Ribeiro, M. F., Pirard, R., Heinrichs, B., Figueiredo, J. L., Pirard, J.-P., & Regalbuto, J. R. (January 2009). Synthesis of very highly dispersed platinum catalysts supported on carbon xerogels by the strong electrostatic adsorption method. Journal of Catalysis, 261, 23-33. doi:10.1016/j.jcat.2008.10.014

Zubizaretta, L., Arenillas, A., Pis, J. J., Pirard, J.-P., & Job, N. (2009). Studying chemical activation in carbon xerogels. Journal of Materials Science, 44, 6583-6590.

Gommes, C., Job, N., Pirard, J.-P., Blacher, S., & Goderis, B. (2008). Critical opalescence points to thermodynamic instability:relevance to small-angle X-ray scattering of resorcinol–formaldehyde gel formation at low pH. Journal of Applied Crystallography, 41 (4), 663-668. doi:10.1107/S0021889808014994

Job, N., Marie, J., Lambert, S., Berthon-Fabry, S., & Achard, P. (2008). Carbon xerogels as catalyst supports for PEM fuel cell cathode. Energy Conversion and Management, 49, 2461-2470. doi:10.1016/j.enconman.2008.03.025

Zubizarreta, L., Arenillas, A., Menendez, J. A., Pis, J. J., Pirard, J.-P., & Job, N. (2008). Microwave drying as an effective method to obtain porous carbon xerogels. Journal of Non-Crystalline Solids, 354 (33), 4024-4026. doi:10.1016/j.jnoncrysol.2008.06.003

Zubizarreta, L., Arenillas, A., Pirard, J.-P., Pis, J. J., & Job, N. (2008). Tailoring the textural properties of activated carbon xerogels by chemical activation with KOH. Microporous and Mesoporous Materials, 115 (3), 480-490. doi:10.1016/j.micromeso.2008.02.023

Job, N., Panariello, F., Crine, M., Pirard, J.-P., & Léonard, A. (01 February 2007). Rheological determination of the sol-gel transition during the aqueous synthesis of resorcinol-formaldehyde resins. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 293 (1-3), 224-228. doi:10.1016/j.colsurfa.2006.07.037

Gommes, C., Job, N., Blacher, S., & Pirard, J.-P. (2007). Compressing some sol-gel materials reduces their stiffness: a textural analysis. Studies in Surface Science and Catalysis, 160, 193-200. doi:10.1016/s0167-2991(07)80026-7

Job, N., Pirard, R., Vertruyen, B., Colomer, J.-F., Marien, J., & Pirard, J.-P. (2007). Synthesis of transition metal-doped carbon xerogels by cogelation. Journal of Non-Crystalline Solids, 353 (24-25), 2333-2345. doi:10.1016/j.jnoncrysol.2007.04.001

Job, N., Sabatier, F., Pirard, J.-P., Crine, M., & Léonard, A. (October 2006). Towards the production of carbon xerogel monoliths by optimizing convective drying conditions. Carbon, 44 (12), 2534-2542. doi:10.1016/j.carbon.2006.04.031

Cabiac, A., Job, N., Pirard, J.-P., & Delahay, G. (2006). Cu/carbon xerogel catalysts for the selective catalytic reduction of NO by NH3 : effect of the pore texture. Journal of Chemistry for Sustainable Development, 6, 559-564.

Job, N., Heinrichs, B., Lambert, S., Pirard, J.-P., Colomer, J.-F., Vertruyen, B., & Marien, J. (2006). Carbon xerogels as catalyst supports: study of mass transfer. AIChE Journal, 52, 2663-2676. doi:10.1002/aic.10870

Job, N., Heinrichs, B., Léonard, A., Colomer, J.-F., Marien, J., & Pirard, J.-P. (2006). Avoiding mass transfer limitations in carbon supported catalysis by using carbon xerogel as supports. Chemistry for Sustainable Development, 14, 571-575.

Job, N., Léonard, A., Colomer, J.-F., Pirard, R., Heinrichs, B., Marien, J., Crine, M., & Pirard, J.-P. (2006). Metal catalysts suppported on texture-tailored carbon xerogels. Studies in Surface Science and Catalysis, 162, 111-118.

Job, N., Panariello, F., Marien, J., Crine, M., Pirard, J.-P., & Léonard, A. (01 January 2006). Synthesis optimization of organic xerogels produced from convective air-drying of resorcinol-formaldehyde gels. Journal of Non-Crystalline Solids, 352 (1), 24-34. doi:10.1016/j.jnoncrysol.2005.11.024

Job, N., Pirard, R., Pirard, J.-P., & Alié, C. (2006). Non intrusive mercury porosimetry: Pyrolysis of resorcinol-formaldehyde xerogels. Particle and Particle Systems Characterization, 23 (1), 72-81. doi:10.1002/ppsc.200601011

Job, N., Ribeiro Pereira, M. F., Lambert, S., Cabiac, A., Delahay, G., Colomer, J.-F., Marien, J., Figueiredo, J. L., & Pirard, J.-P. (2006). Highly dispersed platinum catalysts prepared by impregnation of texture-tailored carbon xerogels. Journal of Catalysis, 240 (2), 160-171. doi:10.1016/j.jcat.2006.03.016

Léonard, A., Job, N., Blacher, S., Pirard, J.-P., Crine, M., & Jomaa, W. (July 2005). Suitability of convective air drying for the production of porous resorcinol-formaldehyde and carbon xerogels. Carbon, 43 (8), 1808-1811. doi:10.1016/j.carbon.2005.02.016

Job, N., Heinrichs, B., Ferauche, F., Noville, F., Marien, J., & Pirard, J.-P. (15 May 2005). Hydrodechlorination of 1,2-dichloroethane on Pd-Ag catalysts supported on tailored texture carbon xerogels. Catalysis Today, 102, 234-241. doi:10.1016/j.cattod.2005.02.021

Job, N., Thery, A., Pirard, R., Marien, J., Kocon, L., Rouzaud, J.-N., Béguin, F., & Pirard, J.-P. (2005). Carbon aerogels, cryogels and xerogels: Influence of the drying method on the textural properties of porous carbon materials. Carbon, 43 (12), 2481-2494. doi:10.1016/j.carbon.2005.04.031

Job, N., Pirard, R., Marien, J., & Pirard, J.-P. (2004). Synthesis of transition metal-doped carbon xerogels by solubilization of metal salts in resorcinol-formaldehyde aqueous solution. Carbon, 42 (15), 3217-3227. doi:10.1016/j.carbon.2004.08.013

Job, N., Pirard, R., Marien, J., & Pirard, J.-P. (2004). Porous carbon xerogels with texture tailored by pH control during sol-gel process. Carbon, 42 (3), 619-628. doi:10.1016/j.carbon.2003.12.072

Job, N., Ferauche, F., Pirard, R., & Pirard, J.-P. (2002). Single step synthesis of metal catalysts supported on porous carbon with controlled texture. Studies in Surface Science and Catalysis, 143, 619-626.

Articles accepted in conference proceedings

Deschamps, F., Mahy, J., Léonard, A., Dewandre, A., Scheid, B., & Job, N. (2023). Topographic and electrical characterization of Proton Exchange Membrane fuel cell catalytic layers prepared using carbon black and carbon xerogel supports. In C. Ewels, Carbon 2022 Extended.Abstract.Book (pp. 116-118). Figshare. doi:10.6084/m9.figshare.22360630.v1

Stergiopoulos, V., Lafort, A., Maseri, F., & Job, N. (2013). Effect of current flow on bipolar plate/gas diffusion layer interfacial contact resistance in Proton Exchange Membrane fuel cells (PEMFC). In Proceedings of the Fundamentals and Development of Fuel cells 2013 conference.

Deschamps, F., Traina, K., Pirard, J.-P., & Job, N. (2013). Catalytic layer for PEMFC based on carbon xerogels. In Proceedings of the Fundamentals and Development of Fuel cells 2013 conference.

Léonard, A., Pirard, J.-P., & Job, N. (2012). Synthesis and characterization of porous carbon xerogels and ordered mesoporous carbons for anode materials in Li-based batteries. In E. Fagadar-Cosma (Ed.), Insights into novel solid materials, their recyclability and integration into Li polymer batteries for EVs. Future research directions in this field.:Book of abstracts. Timisoara, Romania: Tempus.

Léonard, A., Piedboeuf, M.-L., Khomenko, V., Senyk, I., Pirard, J.-P., & Job, N. (2012). Resorcinol-formaldehyde carbon xerogels as lithium-ion battery anode materials: influence of porosity on capacity and cycling behaviour. In E. Fagadar-Cosma (Ed.), Insights into novel solid materials, their recyclability and integration into Li polymer batteries for EVs. Future research directions in this field.:Book of abstracts. Timisoara, Romania: Tempus.

Melon, R., Renzoni, R., Léonard, A., Job, N., & Léonard, A. (2012). Life cycle assessment of carbon xerogels. In E. Fagadar-Cosma (Ed.), Book of abstracts - Advanced Workshop - Insights into novel solid materials, their recyclability and integration into Li polymer batteries for EVs (pp. 51-52). Timisoara, Romania: editura Tempus.

Eskenazi, D., Kreit, P., Compère, P., Pirard, J.-P., & Job, N. (2012). Continuous synthesis of porous carbon xerogel beads. In Proceedings of the International Carbon Conference 2012.

Léonard, A., Piedboeuf, M.-L., Khomenko, V., Senyk, I., Pirard, J.-P., & Job, N. (2012). Resorcinol-formaldehyde carbon xerogels as lithium-ion battery anode materials: influence of porosity on capacity and cycling behaviour. In Proceedings of the International Carbon Conference 2012.

Job, N., Maillard, F., Pirard, J.-P., Berthon-Fabry, S., & Chatenet, M. (2011). Pt/carbon xerogel catalysts for PEM fuel cells. In Proceedings of the Fundamentals & Developments of Fuel Cells (FDFC) 2011 Conference.

Brigaudet, M., Berthon-Fabry, S., Beauger, C., Job, N., Chatenet, M., & Achard, P. (2009). Study of diffusive limitations in Proton Exchange Membrane Fuel Cells (PEMFC). In Proceedings of the International Carbon Conference 2009 (pp. 5).

Hildebrand, C., Grzyb, B., Berthon-Fabry, S., Job, N., Rigacci, A., & Achard, P. (2009). EDLC electrodes from cellulose-based carbon aerogels : influence of the carbon's surface chemistry. In Proceedings of the International Carbon Conference 2009 (pp. 6).

Job, N., Berthon-Fabry, S., Lambert, S., Chatenet, M., Maillard, F., Brigaudet, M., & Pirard, J.-P. (2009). Carbon xerogels as supports for catalysts and electrocatalysts. In Proceedings of the International Carbon Conference 2009 (pp. 12).

Zubizaretta, L., Arenillas, A., Pirard, J.-P., Pis, J. J., & Job, N. (2009). Evolution of the surface chemistry of carbon xerogels with very different textural properties by chemical activation and oxidation. In Proceedings of the International Carbon Conference 2009 (pp. 6).

Léonard, A., Escalona, I., Job, N., Olivera-Fuentes, C., Pirard, J.-P., Crine, M., & Blacher, S. (2007). Water desorption isotherms of resorcinol-formaldehyde and carbon xerogels. In The American Carbon Society (Ed.), Proceedings of Carbon 2007.

Léonard, A., Job, N., Jomaa, W., Pirard, J.-P., Crine, M., & Puiggali, J.-R. (2005). Production de xérogels de carbone hyperporeux par séchage convectif. In C. Azzaro-Pantel, J. Bertrand, M. Cabassub, C. Frances, M. Poux, H. Roux-De Balmann, ... C. Xuereb (Eds.), Récents progrès en génie des procédés N° 92: 10ème Congrès de la SFGP, Toulouse 2005. Le génie des procédés vers de nouveaux espaces. Paris, France: Lavoisier Technique et Documentation.

Job, N., Ferauche, F., Pirard, R., & Pirard, J.-P. (2002). Single step synthesis of metal catalysts supported on porous carbon with controlled texture. In Studies in Surface Science and Catalysis (pp. 619-626). Amsterdam, Netherlands: Elsevier Science.

Job, N., Dardenne, A., & Pirard, J.-P. (2001). Study of the sugar ingot flow-patterns in the Notre-Dame Refinery silo in Oreye. In Proceedings of the First International Congress on Tracers and Tracing methods (pp. 8).

Oral presentations in conferences with scientific selection committee

Mahy, J., Lambert, S., Wolfs, C., Drogui, P., & Job, N. (19 July 2023). Adsorption process with carbon xerogel cylinders coupled with in situ regeneration by H2O2 electrogeneration for Refractory Organic Compounds removal in water [Paper presentation]. World Conference on Carbon 2023, Cancun, Mexico.

Mahy, J., Lambert, S., Wolfs, C., Drogui, D., & Job, N. (10 March 2023). Synthesis of porous carbon and Ag-carbon cylinders for the removal of Refractory Organic Compounds in water with adsorption coupled with in situ regeneration by H2O2 electrogeneration and photocatalysis [Paper presentation]. Congrès inter-centre de l'INRS, Québec, Canada.

Carré, B., Karaman, B., Léonard, A., & Job, N. (2023). Optimized carbon supports for durable and high performance PEMFC electrodes [Paper presentation]. CARBON 2023.

Deschamps, F., Mahy, J., Léonard, A., & Job, N. (2023). Peut-on mesurer l’activité de catalyseurs Pt/carbone nanostructurés sur électrode à disque rotative ? [Paper presentation]. Colloque annuel de la SFEC.

Mahy, J., Job, N., Wolfs, C., Deschamps, F., Drogui, P., & Lambert, S. (08 June 2022). Adsorption process with carbon xerogel cylinders for Refractory Organic Compounds removal in water, coupled with innovative in situ regeneration by H2O2 electrogeneration [Paper presentation]. 16th International Conference on Nanostructured Materials (NANO 2022), Séville, Spain.

Pireaux, J.-J., da Silva Pires, M., Bocchese, F., Zubiaur, A., Stergiopoulos, V., Job, N., Houssiau, L., & Busby, Y. (February 2019). Tunable carbon-supported catalyst materials processed by low-pressure plasma treatments of solid precursors [Paper presentation]. 7th International conference on Advanced Plasma Technologies (ICAPT-7), Hue, Vietnam.

Job, N. (30 June 2018). Catalytic layers of Proton Exchange Membrane Fuel Cells based on carbon xerogel supports [Paper presentation]. Carbon for Catalysis (CARBOCAT) 2018, Porto, Portugal.

da Silva Pires, M., Busby, Y., Haye, E., Job, N., Pireaux, J.-J., & Houssiau, L. (05 June 2018). Catalyseurs pour piles à combustible fabriqués par degradation plasma de précurseurs organométalliques [Paper presentation]. ELSPEC 2018, Biarritz, France.

Asset, T., Job, N., Busby, Y., Crisci, A., Martin, V., Stergiopoulos, V., Bonnaud, C., Serov, A., Atanassov, P., Chattot, R., Dubau, L., & Maillard, F. (13 May 2018). Porous hollow PtNi/C electrocatalysts: carbon support considerations to meet stability requirements [Paper presentation]. 232nd ECS Meeting, Seattle, United States.

Busby, Y., da Silva Pires, M., Haye, Stergiopoulos, V., Job, N., & Pireaux. (12 December 2017). Versatile Catalyst Materials Fabrication by Low-Pressure Plasma Treatments [Paper presentation]. European Fuel Cell 2017, Naples, Italy.

Piedboeuf, M.-L., Léonard, A., & Job, N. (26 October 2017). CARBON XEROGELS AS MODEL MATERIALS TO STUDY THE BEHAVIOR OF HARD CARBONS AS ANODES FOR LITHIUM-ION BATTERIES [Paper presentation]. CESEP 2017 - 7th international conference on carbon for energy storage and environnement protection, Lyon, France.

Haye, E., Busby, Y., da Silva Pires, M., Job, N., & Pireaux, J.-J. (October 2017). Synthesis and characterization of Ni-based nanoparticles by low-pressure plasma treatment of a solid precursor [Paper presentation]. 8th International Conference on Innovations in Thin Film Processing and Characterization, Nancy, France.

Deschamps, F., & Job, N. (14 August 2017). Conductivity measurement of PEMFC catalytic layers based on carbon xerogels and carbon black [Paper presentation]. Advances in Functional Materials Conference 2017.

Zubiaur, A., Asset, T., Deschamps, F., Stergiopoulos, V., Busby, Y., Dubau, L., Maillard, F., Pireaux, J.-J., & Job, N. (03 March 2017). Carbon gel-supported catalysts for PEM fuel cell catalytic layers [Paper presentation]. European Fuel Cell Car Workshop (EFCW 2017), Orléans, France.

Asset, T., Chattot, R., Dubau, L., Job, N., & Maillard, F. (2017). Controlling the morphology, activity and durability of PtNi porous hollow nanoparticles through the nature of their carbon support [Paper presentation]. 68th Annual Meeting of the International Society of Electrochemistry, Providence, United States.

Romano, A.-P., Caldarella, G., Poelman, M., Maseri, F., Olivier., M., & Job, N. (2017). Corrosion performance of electropolymerized doped polypyrrole coatings on a 316L stainless steel bipolar plates for proton exchange membrane fuel cells (PEMFC) [Paper presentation]. EuroCorr2017 & 20th ICC congress, Prague, Czechia.

Busby, Y., Gulas, M., Laurent-Brocq, M., Devant, L., Stergiopoulos, V., Job, N., & Pireaux, J.-J. (12 December 2016). Nanoparticles-nanosubstrates hybrids through one pot synthesis by plasma treatment: towards optimization of Pt/carbon catalysts for PEM fuel cells [Paper presentation]. 6th International Conference on Advanced Plasma Technologies ICAPT-6, Siem Reap, Cambodia.

Baneton, J., Busby, Y., Caldarella, G., Laha., P., Pireaux., J.-J., Job, N., Terryn, H., & Reniers, F. (06 November 2016). Using a dielectric barrier discharge (DBD) device to produce proton exchange membranes at atmospheric pressure for PEMFC technology [Paper presentation]. 69. AVS 63rd International Symposium & Exhibition, Nashville (TE), United States.

Piedboeuf, M.-L., Léonard, A., & Job, N. (22 September 2016). Carbon xerogels: model materials to study the behavior of hard carbons as anodes for lithium-ion batteries [Paper presentation]. 3rd International seminar on aerogels, Sophia-Antipolis, France.

Busby, Y., da Silva., M., Stergiopoulos, V., Job, N., Houssiau, L., & Pireaux., J.-J. (19 September 2016). Dry synthesis of Pt/C and Pt-Ni/C catalysts for PEM fuel cells by low-pressure plasma [Paper presentation]. E-MRS Fall Meeting, Symposium Q: ‘Advanced materials for fuel cells and electrolyzers’, Varsovie, Poland.

Asset, T., Chattot, R., Nelayah, J., Dnerc, J., Bordet, P., Dubau, L., Job, N., & Maillard, F. (12 September 2016). Influence of grain boundaries on the COads monolayer oxidation and oxygen reduction reaction kinetics [Paper presentation]. International Symposium on Electrocatalysis (ECAT 2016), Kanagawa, Japan.

Busby, Y., Gulas, M., Laurent-Brocq, M., Devant, L., Stergiopoulos, V., Job, N., & Pireaux, J.-J. (22 August 2016). One pot synthesis by plasma treatment of Pt-based catalysts for PEM fuel cells [Paper presentation]. International Vacuum Conference - Symposium Electronic Materials and Processing: Fuel Cells (EM03), Busan, South Korea.

Piedboeuf, M.-L., Léonard, A., & Job, N. (08 August 2016). Carbon xerogels as model materials to study the behavior of hard carbons as anodes for lithium-ion batteries [Paper presentation]. Nano 2016, Québec, Canada.

Baneton, J., Merche, D., Caldarella, G., Job, N., & Reniers, F. (07 June 2016). Atmospheric-pressure plasma synthesis of sulfonated polystyrene membranes for PEMFC technology using dielectric barrier discharge devices of different geometry [Paper presentation]. Workshop IAP Plasma 2016, Nancy, France.

Busby, Y., Felten, A., Gulas, M., Laurent-Brocq, M., Devant, L., Job, N., & Pireaux, J.-J. (24 May 2016). Interface nanoparticules de métal - carbone: de la physico-chimie de base aux catalyseurs Pt/C [Paper presentation]. Conférence francophone de spectroscopies électroniques ELSPEC, Paris, France.

Baneton, J., Merche, D., Raes, M., Debaille., V., Busby, Y., Caldarella, G., Stergiopoulos, V., Terryn, H., Pireaux., Job, N., & Reniers, F. (18 October 2015). Atmospheric plasma synthesis of metallic platinum nanoparticles for PEMFC technology using an organometallic-carbon solution nebulized in the post-discharge of an RF torch [Paper presentation]. AVS 62nd Internationa Symposium & Exhibition, San José (CA), United States.

Deschamps, F., Léonard, A., & Job, N. (15 July 2015). Characterization of PEMFC catalytic layers based on carbon xerogels [Paper presentation]. Carbon 2015.

Piedboeuf, M.-L., Léonard, A., Deschamps, F., & Job, N. (15 July 2015). Carbon Xerogels as Anodes for Lithium-Ion Batteries: model materials for the study of irreversible capacity losses in carbon materials [Paper presentation]. CARBON 2015, Dresde, Germany.

Léonard, A., Piedboeuf, M.-L., & Job, N. (13 July 2015). How do surface-modified carbon xerogels devoid of micropores behave as anode materials for Li-ion batteries ? [Paper presentation]. ACIN 2015 - International Symposium on Advanced Complex Inorganic Nanomaterials, Namur, Belgium.

Deschamps, F., Léonard, A., & Job, N. (01 July 2015). Characterization of PEMFC catalytic layers based on carbon xerogels [Paper presentation]. AFM 2015.

Piedboeuf, M.-L., Léonard, A., Deschamps, F., & Job, N. (18 May 2015). Xérogels de carbone en tant qu’anode de batteries Li-ion: Vers une relation texture - performances électrochimiques [Paper presentation]. Colloque francophone du carbone 2015, Les karellis, France.

Job, N., Piedboeuf, M.-L., Zubiaur, A., Deschamps, F., & Léonard, A. (2015). Carbon xerogels as model materials for electrochemical devices [Paper presentation]. 17th International Sol-Gel Conference.

Job, N., Lambert, S., Zubiaur, A., Cao., C., & Pirard, J.-P. (July 2014). Design of Pt/carbon xerogel catalysts for PEM fuel cells [Paper presentation]. 11th International Symposium on Scientific Bases for the Preparation of Heterogeneous Catalysts, Louvain-la-Neuve, Belgium.

Zubiaur, A., Chatenet, M., Maillard, F., Olu, P.-Y., & Job, N. (July 2014). Synthesis of Pt/Carbon Xerogel Electrocatalysts for Proton Exchange Membrane Fuel Cells (PEMFC): Effect of the Reduction Procedure [Paper presentation]. XII international conference on Nanostructured Materials (NANO 2014), Moscou, Russia.

Piedboeuf, M.-L., Léonard, A., Traina, K., & Job, N. (15 May 2014). Influence du broyage mécanique sur la taille et les paramètres texturaux de particules de xérogels de carbone [Paper presentation]. Conférence annuelle du Groupe Français d'Etude sur le Carbone GFEC 2014, Nouan le Fuzelier (Orléans), France.

Léonard, A., Piedboeuf, M.-L., & Job, N. (13 May 2014). Diminution de la microporosité de xérogels de carbone poreux par modification de surface et évaluation de leurs performances en tant que matériaux d’anodes pour batteries Li-ion [Paper presentation]. Colloque du GFEC 2014, Nouan-le-Fuzelier, France.

Devant, L., Laurent-Brocq, M., Job, N., & Pireaux., J.-J. (2014). Pt/C catalyst for PEM fuel cells: low pressure and low temperature plasma synthesis of Pt nanoparticles [Paper presentation]. 15th Latin American Workshop on Plasma Physics, San Jose, Costa Rica.

Piedboeuf, M.-L., Léonard, A., Pirard, J.-P., & Job, N. (May 2013). Xérogels de carbone à base de résorcinol-formaldéhyde en tant que matériaux d’anode pour batterie Li-ion; Synthèse et broyage avec contrôle de la granulométrie [Paper presentation]. Conférence annuelle du Groupe Français d'Etude sur le Carbone GFEC 2013, Voreppe, France.

Olu, P.-Y., Rouhet, M., Bonnefont, A., Savinova, E., Job, N., & Chatenet, M. (2013). Étude du mécanisme d'électrooxydation de BH4- sur platine à bas potentiel [Paper presentation]. Journées d’Electrochimie 2013, Paris, France.

Deschamps, F., Traina, K., Pirard, J.-P., & Job, N. (01 October 2012). Préparation de couches catalytiques pour PEMFC à partir de xérogels de carbone [Paper presentation]. Journées Scientifiques du GFEC (Groupe Français d'Etudes des Carbones), Houffalize, Belgium.

Laurent-Brocq, M., Job, N., & Pireaux, J.-J. (01 October 2012). Fonctionnalisation surfacique de poudre de carbone pour greffer des nanoparticules métalliques par plasma [Paper presentation]. Journées Scientifiques du GFEC (Groupe Français d'Etudes des Carbones), Houffalize, Belgium.

Piedboeuf, M.-L., Léonard, A., Khomenko, V., Senyk, I., Pirard, J.-P., & Job, N. (October 2012). Xérogels de carbone à base de résorcinol-formaldéhyde en tant que matériaux d’anode pour batterie Li-ion : influence de la porosité sur la capacité et le comportement lors des cycles d’insertion-désinsertion [Paper presentation]. Journées Scientifiques du Groupe Français d’Étude des Carbones 2012, Houffalize, Belgium.

Zubiaur, A., Chatenet, M., Maillard, F., Lambert, S., Pirard, J.-P., & Job, N. (01 October 2012). Propriétés physicochimiques et électrochimiques de catalyseurs Pt/xérogel de carbone synthétisés par la méthode de SEA multiple [Paper presentation]. Journées Scientifiques du GFEC (Groupe Français d'Etudes des Carbones), Houffalize, Belgium.

Eskenazi, D., Kreit, P., Compère, P., Pirard, J.-P., & Job, N. (17 June 2012). Continuous synthesis of porous carbon xerogel beads. Communication présentée par D. Eskenazi [Paper presentation]. ANQUE's International Congress of Chemical Engineering, Séville, Spain.

Léonard, A., Job, N., & Pirard, J.-P. (2012). Nanostructured carbon materials for energy storage applications: control of porosity of resorcinol-formaldehyde xerogels [Paper presentation]. Annual World Conference on Carbon 2012, Cracovie, Poland.

Job, N., Maillard, F., Chatenet, M., Gommes, C., Lambert, S., Hermans, S., Regalbuto, J. R., & Pirard, J.-P. (11 July 2010). Synthesis and characterization of highly loaded Pt/carbon xerogel catalysts prepared by Strong Electrostatic Adsorption method [Paper presentation]. 10th International Symposium on Scientific Bases for the Preparation of Heterogeneous Catalysts, Louvain-la-Neuve, Belgium.

Chatenet, M., Job, N., & Maillard, F. (28 June 2009). The (electro)catalyst/membrane interface in the Proton Exchange Membrane Fuel Cell : similarities and differences with non-electrochemical Catalytic Membrane Reactors [Paper presentation]. 9th International Conference on Catalysis in Membrane Reactors, Lyon, France.

Brigaudet, M., Berthon-Fabry, S., Beauger, C., Job, N., Chatenet, M., & Achard, P. (14 June 2009). Study of diffusive limitations in Proton Exchange Membrane Fuel Cells (PEMFC) [Paper presentation]. Carbon Conference 2009, Biarritz, France.

Job, N., Berthon-Fabry, S., Lambert, S., Chatenet, M., Maillard, F., Brigaudet, M., & Pirard, J.-P. (14 June 2009). Carbon xerogels as supports for catalysts and electrocatalysts [Paper presentation]. International Carbon Conference 2009, Biarritz, France.

Maillard, F., Vion-Dury, Solhy, K., Dubau, L., Chatenet, M., Job, N., & Guetaz, L. (24 May 2009). Degradation mechanisms of Pt/C electrocatalysts at the nm-scale [Paper presentation]. 21th ECS (Electrochemical Society) Meeting, San Francisco, Californie, United States.

Job, N., Maillard, F., Marie, J., Berthon-Fabry, S., Pirard, J.-P., & Chatenet, M. (31 March 2008). Caractérisation électrochimique de catalyseurs Pt/xérogel de carbone et Pt/aérogel de carbone [Paper presentation]. Journées scientifiques du GFEC (Groupe Français d'Etudes des Carbones), Chambon-sur-Lac, France.

Job, N., Marien, J., Lambert, S., Berthon-Fabry, S., & Achard, P. (19 March 2007). Xérogels de carbone comme supports de catalyseurs pour cathodes de piles à combustibles PEM [Paper presentation]. Journées scientifiques du GFEC (Groupe Français d'Etudes des Carbones), Carcans-Maubuisson, France.

Job, N., Marie, J., Lambert, S., D'Souza, L., Heinrichs, B., Regalbuto, J. R., Berthon-Fabry, S., Pirard, J.-P., & Achard, P. (2007). Carbon xerogels as catalyst supports for PEM fuel cell cathode [Paper presentation]. 2nd International Conference on Carbon for Energy Storage and Environment Protection, CESEP'07, Krakow, Poland.

Job, N., Heinrichs, B., Léonard, A., Colomer, J.-F., Marien, J., & Pirard, J.-P. (2006). Élimination des limitations de transfert de matière en catalyse supportée sur carbone par utilisation de supports de type xérogel de carbone [Paper presentation]. Journées Scientifiques du GFEC (Groupe Français d’Études des Carbones), Presqu’île de Giens, France.

Job, N., Heinrichs, B., Léonard, A., Colomer, J.-F., Marien, J., & Pirard, J.-P. (2006). Avoiding mass transfer limitations in carbon supported catalysis by using carbon xerogel type supports [Paper presentation]. Second International Symposium on Carbon for Catalysis - CarboCat-II, St. Petersburg, Russia.

Job, N., Léonard, A., Pirard, R., Heinrichs, B., Crine, M., & Pirard, J.-P. (2006). Metal catalysts supported on texture tailored carbon xerogels [Paper presentation]. 9th International Symposium - Scientific Bases for the Preparation of Heterogeneous Catalysts, Louvain-la-Neuve, Belgium.

Job, N., Alié, C., Pirard, R., & Pirard, J.-P. (30 May 2005). Non intrusive mercury porosimetry : application to the study of the texture evolution of resorcinol-formaldehyde xerogel during pyrolysis [Paper presentation]. Workshop - Macro/Mesopore Analysis : Mercury Porosimetry and Alternative Liquid Penetration Techniques, Aix-en-Provence, France.

Job, N., Théry, A., Pirard, R., Marien, J., Kocon, L., Rouzaud, J.-N., Béguin, F., & Pirard, J.-P. (22 March 2005). Aérogels, cryogels et xérogels de carbone: influence de la méthode de séchage sur les propriétés texturales des matériaux carbonés poreux [Paper presentation]. Journées Scientifiques du GFEC (Groupe Français d'Etude des Carbones), Saint-Agnan en Morvan, France.

Job, N., Heinrichs, B., Ferauche, F., & Pirard, J.-P. (19 July 2004). Hydrodechlorination of 1,2-dichloroethane on Pd-Ag catalysts supported on texture-tailored materials [Paper presentation]. 1st International Symposium on Carbon for Catalysis (CARBOCAT I), Lausanne, Switzerland.

Job, N., Pirard, R., Marien, J., & Pirard, J.-P. (15 March 2004). Xérogels de carbone chargés en métaux par solubilisation de sels dans la solution de précurseurs : influence sur la texture des matériaux carbonés [Paper presentation]. Journées scientifiques du GFEC (Groupe Français d'Etudes des Carbones), Nieuwpoort, Belgium.

Job, N., Heinrichs, B., Ferauche, F., Marien, J., & Pirard, J.-P. (2004). Hydrodechlorination of 1,2-dichloroethane on Pd-Ag catalysts supported on texture-tailored carbon xerogels [Paper presentation]. International Symposium on Carbon for Catalysis, CarboCat-2004, Lausanne, Switzerland.

Job, N., Pirard, R., & Pirard, J.-P. (15 September 2003). Synthèse et caractérisation de catalyseurs métalliques supportés sur carbone de texture contrôlée par procédé sol-gel [Paper presentation]. Journées scientifiques du GFEC (Groupe Français d'Etudes des Carbones), Praz-sur-Arly, France.

Patents

Godaux, D., Lorge, P., Ghysels, B., Job, N., Franck, F., Caldarella, G., Cardol, P., & Remacle, C. (18 November 2020). Polypeptide monomérique présentant une activité hydrogénase, en particulier polypeptide monomérique recombinant présentant une activité hydrogénase.

Lorge, P., Remacle, C., Gerin, S., Job, N., Franck, F., Caldarella, G., Ghysels, B., Godaux, D., & Cardol, P. (30 November 2017). Dispositif pour la production d'hydrogène gazeux.

Lorge, P., Remacle, C., Gerin, S., Job, N., Franck, F., Caldarella, G., Ghysels, B., Godaux, D., & Cardol, P. (31 August 2017). DISPOSITIF PHOTO-CATALYTIQUE POUR LA PRODUCTION D'HYDROGENE GAZEUX.

Léonard, A., Piedboeuf, M.-L., & Job, N. (2017). Process to prepare an electrode for an electrochemical device.

Pirard, J.-P., Pirard, R., & Job, N. (2003). Porous carbon material.