Publications and communications of Laurent Duchene

Articles in scientific journals with peer reviewing

Osorio Laurencio, L., Moreno, M., Rivera, M., Tuninetti, V., Chavarria, G. R., Duchene, L., & Wheeler, P. (15 March 2024). A metaheuristic-based method for photovoltaic temperature computation under tropical conditions. Solar Energy, 271 (2024), 112414. doi:10.1016/j.solener.2024.112414

Rojas Ulloa, C. E., Morch, H., Tuninetti, V., Duchene, L., & Habraken, A. (01 February 2024). Implementation of a modified Graham-Walles viscosity function within a Chaboche viscoplastic constitutive model. Computers and Mathematics with Applications, 155, 165-175. doi:10.1016/j.camwa.2023.12.002

Gallo, C., Duchene, L., Quy Duc Pham, T., Jardin, R., Tuninetti, V., & Habraken, A. (30 January 2024). Impact of Boundary Parameters Accuracy on Modeling of Directed Energy Deposition Thermal Field. Metals, 14 (2), 173. doi:10.3390/met14020173

Pham Quy Duc, T., Hoang, T. V., Tran, X. V., Fetni, S., Duchene, L., Tran, H. S., & Habraken, A. (06 October 2023). A framework for the robust optimization under uncertainty in additive manufacturing. Journal of Manufacturing Processes, 103, 53 - 63. doi:10.1016/j.jmapro.2023.08.009

Tuninetti, V., Oñate, A., Valenzuela, M., Sepulveda, H., Pincheira, G., Medina, C., García-Herrera, C., Duchene, L., & Habraken, A. (September 2023). Characterization approaches affect asymmetric load predictions of hexagonal close-packed alloy. Journal of Materials Research and Technology, 26, 5028 - 5036. doi:10.1016/j.jmrt.2023.08.255

Jardin, R. T., Tuninetti, V., Tchuindjang, J. T., Duchene, L., Hashemi, S. N., Tran, H. S., Carrus, R., Mertens, A., & Habraken, A. (August 2023). Optimizing laser power of directed energy deposition process for homogeneous AISI M4 steel microstructure. Optics and Laser Technology, 163, 109426. doi:10.1016/j.optlastec.2023.109426

Rojas Ulloa, C. E., Tuninetti, V., Sepulveda, H., Betaieb, E., Pincheira, G., Gilles, G., Duchene, L., & Habraken, A. (2023). Accurate numerical prediction of ductile fracture and micromechanical damage evolution for Ti6Al4V alloy. Computational Mechanics. doi:10.1007/s00466-023-02362-3

Dashti, A., Keller, C., Vieille, B., Guillet, A., Gallo, C., Habraken, A., & Duchene, L. (2023). Impact of hardening law on the FEM prediction of residual stresses in copper-clad aluminum wires. International Journal of Advanced Manufacturing Technology. doi:10.1007/s00170-023-11315-2

Morch, H., Yuan, S., Duchene, L., Harzallah, R., & Habraken, A. (October 2022). A review of higher order Newton type methods and the effect of numerical damping for the solution of an advanced coupled Lemaitre damage model. Finite Elements in Analysis and Design, 209, 103801. doi:10.1016/j.finel.2022.103801

Tran, H. S., Bouffioux, C., Dedry, O., Rojas Ulloa, C. E., Duchene, L., Mertens, A., & Habraken, A. (2022). Identification of a soft matrix-hard inclusion material by indentation. International Journal of Mechanical Sciences, 107723. doi:10.1016/j.ijmecsci.2022.107723

Betaieb, E., Duchene, L., & Habraken, A. (2022). Calibration of kinematic hardening parameters on sheet metal with a Computer Numerical Control machine. International Journal of Material Forming. doi:10.1007/s12289-022-01714-3

Habraken, A., Aksen, T. A., Alves, J. L., Amaral, R. L., Betaieb, E., Chandola, N., Corallo, L., Cruz, D. J., Duchene, L., Engel, B., Esener, E., Firat, M., Frohn-Sörensen, P., Galán-López, J., Ghiabakloo, H., Kestens, L. A. I., Lian, J., Lingam, R., Liu, W., ... Vincze, G. (15 July 2022). Analysis of ESAFORM 2021 cup drawing benchmark of an Al alloy, critical factors for accuracy and efficiency of FE simulations. International Journal of Material Forming, 15 (5), 61. doi:10.1007/s12289-022-01672-w

Pham Quy Duc, T., Truong Vinh Hoang, Xuan Van Tran, Quoc Tuan Pham, Seif Fetni, Duchene, L., Tran Son Hoang, & Habraken, A. (17 May 2022). Characterization, propagation, and sensitivity analysis of uncertainties in the directed energy deposition process using a deep learning-based surrogate model. Probabilistic Engineering Mechanics, 69, 103297. doi:10.1016/j.probengmech.2022.103297

Yuan, L., Guo, M., Habraken, A., Duchene, L., & Zhuang, L. (14 March 2022). Extremely improved formability of Al–Zn–Mg–Cu alloys via micro-domain heterogeneous structure. Materials Science and Engineering: A: Structural Materials: Properties, Microstructures and Processing, 837, 142737. doi:10.1016/j.msea.2022.142737

Pham Quy Duc, T., Hoang, T. V., Van Tran, X., Tuan Pham, Q., Fetni, S., Duchene, L., Tran, H. S., & Habraken, A. (2022). Fast and accurate prediction of temperature evolutions in additive manufacturing process using deep learning. Journal of Intelligent Manufacturing. doi:10.1007/s10845-021-01896-8

El Fetni, S., Habraken, A., & Duchene, L. (2022). Capabilities of Auto-encoders and Principal Component Analysis of the reduction of microstructural images; Application on the acceleration of Phase-Field simulations. Computational Materials Science, 216 (January 2023). doi:10.1016/j.commatsci.2022.111820

Tchuindjang, J. T., Paydas, H., Tran, H. S., Carrus, R., Duchene, L., Mertens, A., & Habraken, A. (31 May 2021). A New Concept for Modeling Phase Transformations in Ti6Al4V Alloy Manufactured by Directed Energy Deposition. Materials, 14 (11), 2985. doi:10.3390/ma14112985

El Fetni, S., Maurizi-Enrici, T., Niccolini, T., Tran, H. S., Dedry, O., Duchene, L., Mertens, A., & Habraken, A. (17 March 2021). Thermal model for the directed energy deposition of composite coatings of 316L stainless steel enriched with tungsten carbides. Materials & Design, 204 (109661). doi:10.1016/j.matdes.2021.109661

Rojas-Ulloa, C., Bouffioux, C., Jaramillo, A., García-Herrera, C., Hussain, T., Duchene, L., Riu, G., Roa, J. J., Flores, P., Habraken, A., & Tuninetti, V. (16 March 2021). Nanomechanical Characterization of the Deformation Response of Orthotropic Ti–6Al–4V. Advanced Engineering Materials, 2001341. doi:10.1002/adem.202001341

Morch, H., Duchene, L., Harzallah, R., Tuninetti, V., & Habraken, A. (January 2021). Efficient temperature dependence of parameters for thermo-mechanical finite element modeling of Alloy 230. European Journal of Mechanics. A, Solids, 85. doi:10.1016/j.euromechsol.2020.104116

Yuan, S., Duchene, L., Keller, C., Hug, E., Folton, C., Betaieb, E., Milis, O., & Habraken, A. (2021). Mechanical response of nickel multicrystals for shear and tensile conditions at room temperature and 573 K. Materials Science and Engineering: A: Structural Materials: Properties, Microstructures and Processing, 809, 140987. doi:10.1016/j.msea.2021.140987

Jardin Tome, R., Tuninetti, V., Tchuindjang, J. T., Hashemi, S. N., Carrus, R., Mertens, A., Duchene, L., Tran, H. S., & Habraken, A. (22 November 2020). Sensitivity Analysis in the Modelling of a High Speed Steel Thin-Wall Produced by Directed Energy Deposition. Metals, 10 (2020), 1554. doi:10.3390/met10111554

El Fetni, S., Maurizi-Enrici, T., Niccolini, T., Tran, H. S., Dedry, O., Jardin, R., Duchene, L., Mertens, A., & Habraken, A. (September 2020). 2D thermal finite element analysis of laser cladding of 316L+WC Composite coatings. Procedia Manufacturing, 50 (86-92). doi:10.1016/j.promfg.2020.08.016

Tuninetti, V., Flores, P., Valenzuela, M., Pincheira, G., Medina, C., Duchene, L., & Habraken, A. (06 March 2020). Experimental characterization of the compressive mechanicalbehaviour of Ti6Al4V alloy at constant strain rates over the fullelastoplastic range. International Journal of Material Forming, 13 (709–724). doi:10.1007/s12289-020-01543-2

Yuan, S., Duchene, L., Keller, C., Hug, E., & Habraken, A. (March 2020). Tunable surface boundary conditions in strain gradient crystal plasticity model. Mechanics of Materials, 145. doi:10.1016/j.mechmat.2020.103393

Tuninetti, V., Gilles, G., Flores, P., Pincheira, G., Duchene, L., & Habraken, A. (14 September 2019). Impact of distortional hardening and the strength differential effect on the prediction of large deformation behavior of the Ti6Al4V alloy. Meccanica, 54 (11-12), 1823–1840. doi:10.1007/s11012-019-01051-x

Tomé Jardin, R. A., Tchuindjang, J. T., Duchene, L., Tran, H. S., Hashemi, S. N., Carrus, R., Mertens, A., & Habraken, A. (01 February 2019). Thermal histories and microstructures in Direct Energy Deposition of a High Speed Steel thick deposit. Materials Letters, 236, 42-45. doi:10.1016/j.matlet.2018.09.157

Guzman, C. F., Yuan, S., Duchene, L., Flores, E. I. S., & Habraken, A. (2018). Damage prediction in single point incremental forming using an extended Gurson model. International Journal of Solids and Structures, 151, 45-56. doi:10.1016/j.ijsolstr.2017.04.013

Tran, H. S., Tchuindjang, J. T., Paydas, H., Mertens, A., Tomé Jardin, R. A., Duchene, L., Carrus, R., Lecomte-Beckers, J., & Habraken, A. (15 August 2017). 3D thermal finite element analysis of laser cladding processed Ti-6Al-4V part with microstructural correlations. Materials and Design, 128, 130-142. doi:10.1016/j.matdes.2017.04.092

Velosa De Sena, J., Guzmán Inostroza, C. F., Duchene, L., Habraken, A., Behera, A. K., Duflou, J., Angelo Valente, R., & Alves de Sousa, R. J. (July 2016). Simulation of a two-slope pyramid made by SPIF using an adaptive remeshing method with solid-shell finite element. International Journal of Material Forming, 9 (3), 259-434. doi:10.1007/s12289-014-1213-8

Sena, J., Lequesne, C., Duchene, L., Habraken, A., Valente, R., & Alves de Sousa, R. (June 2016). Single point incremental forming simulation with adaptive remeshing technique using solid-shell elements. Engineering Computations, 33 (5), 1388-1421. doi:10.1108/EC-06-2015-0172

Ben Bettaieb, A., Velosa de Sena, J. I., Alves de Sousa, R., Valente, R., Habraken, A., & Duchene, L. (December 2015). On the comparison of two solid-shell formulations based on in-plane reduced and full integration schemes in linear and non-linear applications. Finite Elements in Analysis and Design, 107, 44-59. doi:10.1016/j.finel.2015.08.005

HUG, E., DUBOS, P. A., keller, C., Duchene, L., & Habraken, A. (July 2015). Size effects and temperature dependence on strain-hardening mechanisms in some face centered cubic materials. Mechanics of Materials, 91, 136-151. doi:10.1016/j.mechmat.2015.07.001

Keller, C., Hug, E., Habraken, A., & Duchene, L. (January 2015). Effect of stress path on the miniaturization size effect for nickel polycrystals. International Journal of Plasticity, 64, 26-39. doi:10.1016/j.ijplas.2014.07.001

Gilles, G., Habraken, A., & Duchene, L. (2014). Experimental investigation and phenomenological modeling of the quasi-static mechanical behavior of TA6V titanium alloy. Key Engineering Materials, 622-623, 1200-1206. doi:10.4028/www.scientific.net/KEM.622-623.1200

Zhang, L., Habraken, A., Ben Bettaieb, A., & Duchene, L. (17 April 2013). Parametric study of metal/polymer multilayer coatings for temperature wrinkling prediction. Journal of Materials Engineering and Performance, 22 (9), 2437-2445. doi:10.1007/s11665-013-0541-z

Duchene, L., Guzmán Inostroza, C. F., Behera, A. K., Duflou, J., & Habraken, A. (2013). Numerical simulation of a pyramid steel sheet formed by single point incremental forming using solid-shell finite elements. Key Engineering Materials. doi:10.4028/www.scientific.net/KEM.549.180

Ben Bettaieb, A., Tuninetti Vásquez, V., & Duchene, L. (2012). Numerical simulation of T-bend of multilayer coated metal sheet using solid-shell element. Steel Research International.

Keller, C., Habraken, A., & Duchene, L. (July 2012). Finite element investigation of size effects on the mechanical behavior of nickel single crystals. Materials Science and Engineering: A: Structural Materials: Properties, Microstructures and Processing, 550 (30), 342-349. doi:10.1016/j.msea.2012.04.085

Ben Bettaieb, M., Débordes, O., Dogui, A., Duchene, L., & Keller, C. (May 2012). On the numerical integration of rate independent single crystal behavior at large strain. International Journal of Plasticity, 32-33, 184-217. doi:10.1016/j.ijplas.2011.10.010

Guzmán Inostroza, C. F., Ben Bettaieb, A., Velosa de Sena, J. I., Alves de Sousa, R., Habraken, A., & Duchene, L. (February 2012). Evaluation of the Enhanced Assumed Strain and Assumed Natural Strain in the SSH3D and RESS3 Solid Shell Elements for Single Point Incremental Forming Simulation. Key Engineering Materials, 504-506, 913-918. doi:10.4028/www.scientific.net/KEM.504-506.913

Ben Bettaieb, M., Débordes, O., Dogui, A., & Duchene, L. (2012). Averaging properties for periodic homogenization and large deformation. International Journal for Multiscale Computational Engineering. doi:10.1615/IntJMultCompEng.2012002587

Gilles, G., Cazacu, O., Hammami, W., Habraken, A., & Duchene, L. (2012). Experimental and numerical study of TA-6V mechanical behavior in different monotonic loading conditions at room temperature. Procedia IUTAM, 3, 100-114. doi:10.1016/j.piutam.2012.03.008

Keller, C., Hug, E., Habraken, A., & Duchene, L. (2012). Finite element analysis of the free surface effects on the mechanical behavior of thin nickel polycrystals. International Journal of Plasticity, 29, 155–172. doi:10.1016/j.ijplas.2011.08.007

Bouffioux, C., Lequesne, C., Vanhove, H., Duflou, J. R., Pouteau, P., Duchene, L., & Habraken, A. (November 2011). Experimental and numerical study of an AlMgSc sheet formed by an incremental process. Journal of Materials Processing Technology, 211 (11), 1684-1693. doi:10.1016/j.jmatprotec.2011.05.010

Hammami, W., Gilles, G., Habraken, A., & Duchene, L. (01 June 2011). Phenomenological and crystal plasticity approaches to describe the mechanical behaviour of Ti6Al4V titanium alloy. International Journal of Material Forming, 4 (2), 205-2015. doi:10.1007/s12289-011-1028-9

Ben Bettaieb, M., Lemoine, X., Bouaziz, O., Habraken, A., & Duchene, L. (March 2011). Numerical modeling of damage evolution of DP steels on the basis of X-ray tomography measurements. Mechanics of Materials, 43 (3), 139-156. doi:10.1016/j.mechmat.2011.02.005

Ben Bettaieb, M., Lemoine, X., Bouaziz, O., Habraken, A., & Duchene, L. (2011). A finite element analysis of the bending and the bendability of metallic sheets. International Journal of Material Forming, 4 (3), 283-297. doi:10.1007/s12289-010-0993-8

Ben Bettaieb, M., Lemoine, X., Duchene, L., & Habraken, A. (2011). On the numerical integration of an advanced Gurson model. International Journal for Numerical Methods in Engineering, 85 (8), 1049-1072. doi:10.1002/nme.3010

Chen, E., Duchene, L., Habraken, A., & Verlinden, B. (2011). Prediction of the Tension/Compression asymmetry of ECAP processed FCC material using an integrated model based on dislocation and back-stress. Materials Science Forum, 667-669, 961-966. doi:10.4028/www.scientific.net/MSF.667-669.961

Gerday, A.-F., Ben Bettaieb, M., Duchene, L., Clement, N., Diarra, H., & Habraken, A. (2011). Material behavior of the hexagonal alpha phase of a titanium alloy identified from nanoindentation tests. European Journal of Mechanics. A, Solids, 30, 248-255. doi:10.1016/j.euromechsol.2010.11.001

Gilles, G., Hammami, W., Libertiaux, V., Cazacu, O., Yoon, J. H., Habraken, A., & Duchene, L. (2011). Experimental characterization and elasto-plastic modeling of the quasi-static mechanical response of TA-6 V at room temperature. International Journal of Solids and Structures, 48 (9), 1277–1289. doi:10.1016/j.ijsolstr.2011.01.011

Henrard, C., Bouffioux, C., Eyckens, P., Sol, H., Duflou, J. R., Van Houtte, P., Van Bael, A., Duchene, L., & Habraken, A. (2011). Forming forces in single point incremental forming: prediction by finite element simulations, validation and sensitivity. Computational Mechanics, 47, 573-590. doi:10.1007/s00466-010-0563-4

Verleysen, P., Peirs, J., Van Slycken, J., Faes, K., & Duchene, L. (2011). Effect of strain rate on the forming behaviour of sheet metals. Journal of Materials Processing Technology, 211, 1457-1464. doi:10.1016/j.jmatprotec.2011.03.018

Verlinden, B., Chen, E., Duchene, L., & Habraken, A. (2011). Transient yielding during compression tests on ECAP’ed AA1050 Aluminium. Materials Science Forum, 667-669, 955-960. doi:10.4028/www.scientific.net/MSF.667-669.955

Lequesne, C., Plumier, A., Duchene, L., & Habraken, A. (10 May 2010). Modeling of Crack Propagation in Weld Beam-to-Column Connection Submitted to Cyclic Loading with Cohesive Zone Model. Journal of ASTM International, 7 (5). doi:10.1520/JAI102531

Ben Bettaieb, M., Lemoine, X., Duchene, L., & Habraken, A. (2010). Simulation of bending process of hardening metallic sheets using damage model. Part II: Numerical investigations. Materials Science and Engineering: A: Structural Materials: Properties, Microstructures and Processing, 528 (1), 442-448. doi:10.1016/j.msea.2010.09.031

Ben Bettaieb, M., Lemoine, X., Duchene, L., & Habraken, A. (2010). Simulation of bending process of hardening metallic sheets using damage model. Part I: Theoretical development and numerical implementation. Materials Science and Engineering: A: Structural Materials: Properties, Microstructures and Processing, 528 (1), 434-441. doi:10.1016/j.msea.2010.09.030

Chen, E., Duchene, L., Habraken, A., & Verlinden, B. (2010). Multiscale modelling of back-stress during equal-channel angular pressing. Reviews on Advanced Materials Science, 25 (1), 23-31.

Chen, E., Duchene, L., Habraken, A., & Verlinden, B. (2010). Multiscale modeling of back-stress evolution in equal-channel angular pressing: from one pass to multiple passes. Journal of Materials Science, 45 (17), 4696-4704. doi:10.1007/s10853-010-4385-8

Flores, P., Tuninetti Vásquez, V., Gilles, G., Gonry, P., Duchene, L., & Habraken, A. (2010). Accurate stress computation in plane strain tensile tests for sheet metal using experimental data. Journal of Materials Processing Technology, 210, 1772-1779. doi:10.1016/j.jmatprotec.2010.06.008

Keller, C., Afteni, M., Banu, M., Habraken, A., Hug, E., Castagne, S., Duchene, L., & Ben Bettaieb, M. (2010). Effect of a decrease in sample dimensions on plasticity: application to the micro-forming of nickel. Steel Research International, 81 (9), 1173-1177.

Gerday, A.-F., Ben Bettaieb, M., Duchene, L., Clément, N., Diarra, H., & Habraken, A. (2009). Interests and limitations of nanoindentation for bulk multiphase material identification: Application to the β phase of Ti-5553. Acta Materialia, (57), 5186 - 5195. doi:10.1016/j.actamat.2009.07.020

Marmi, A., Habraken, A., & Duchene, L. (2009). Multiaxial fatigue damage modelling at Macro scale of Ti6AL4V alloy. International Journal of Fatigue, 31, 2031-2040. doi:10.1016/j.ijfatigue.2009.03.003

Poortmans, S., Duchene, L., Habraken, A., & Verlinden, B. (2009). Modelling compression tests on aluminium produced by equal channel angular extrusion. Acta Materialia. doi:10.1016/j.actamat.2008.12.023

Cescotto, S., Xiang, L., & Duchene, L. (April 2008). A Natural Neighbor Method Based on Fraeijs de Veubeke Variational Principle for Elastoplasticity and Fracture Mechanics. Journal of Engineering Materials and Technology, 130. doi:10.1115/1.2884337

Ben Bettaieb, M., Lemoine, X., Duchene, L., & Habraken, A. (2008). Study of bendability of steel sheets. Steel Research International, (79/1), 225-232.

de Montleau, P., Habraken, A., & Duchene, L. (2008). A new finite element integration scheme. Application to a simple shear test of anisotropic material. International Journal for Numerical Methods in Engineering. doi:10.1002/nme.2130

Duchene, L., Lelotte, T., Flores, P., Bouvier, S., & Habraken, A. (2008). Rotation of axes for anisotropic metal in FEM simulations. International Journal of Plasticity, (24), 397–427. doi:10.1016/j.ijplas.2007.03.015

Duchene, L., El Houdaigui, F., & Habraken, A. (2007). Length changes and texture prediction during free end torsion test of copper bars with FEM and remeshing techniques. International Journal of Plasticity, 23 (8), 1417-1438. doi:10.1016/j.ijplas.2007.01.008

Flores, P., Duchene, L., Bouffioux, C., Lelotte, T., Henrard, C., Pernin, N., Van Bael, A., He, S., Duflou, J., & Habraken, A. (2007). Model Identification and FE Simulations Effect of Different Yield Loci and Hardening Laws in Sheet Forming. International Journal of Plasticity, 23 (3), 420-449. doi:10.1016/j.ijplas.2006.05.006

Henrard, C., Bouffioux, C., Duchene, L., Duflou, J. R., & Habraken, A. (2007). Validation of a new finite element for incremental forming simulation using a dynamic explicit approach. Key Engineering Materials, 344, 495-502. doi:10.4028/0-87849-437-5.495

Duchene, L., & Habraken, A. (2005). Analysis of the sensivity of FEM predictions to numerical parameters in deep drawing simulations. European Journal of Mechanics. A, Solids, (24), 614-629. doi:10.1016/j.euromechsol.2005.04.007

Habraken, A., & Duchene, L. (2004). Anisotropic elasto-plastic finite element analysis using a stress-strain interpolation method based on a polycrystalline model. International Journal of Plasticity, 20 (Issue 8-9), 1525-1560. doi:10.1016/j.ijplas.2003.11.006

Duchene, L., Godinas, A., Cescotto, S., & Habraken, A. (2002). Texture evolution during deep-drawing processes. Journal of Materials Processing Technology, 125-126, 110-118. doi:10.1016/S0924-0136(02)00331-X

Scientific conferences in universities or research centers

Habraken, A., Mertens, A., Duchene, L., Tchuindjang, J. T., Tran, H. S., Tomé Jardin, R. A., Delahaye, J., Dedry, O., Paydas, H., & Carrus, R. (06 December 2019). Microstructure prediction in additive manufacturing(TA6V, AlSi10Mg, AISI M4 materials) [Paper presentation]. Séminaire mensuel Integrative Systems+Design Division, Ann Arbor, United States - Michigan.

Tuninetti, V., Yuan, S., Gilles, G., Guzmán Inostroza, C. F., Habraken, A., & Duchene, L. (September 2016). Modeling the ductile fracture and the plastic anisotropy of DC01 steel at room temperature and low strain rates [Paper presentation]. NUMISHEET 2016 - The 10th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes, Bristol, United Kingdom.

Tran, H. S., Brusten, R., Paydas, H., Duchene, L., Tomé Jardin, R. A., Lecomte-Beckers, J., & Habraken, A. (20 May 2016). 3-D finite element analysis of laser cladding process. Application to Ti-6Al-4V [Paper presentation]. International conference on COmputational methods in Manufacturing Processes (ICOMP’2016), Liege, Belgium.

Guzmán Inostroza, C. F., Sena, J. I., Duchene, L., & Habraken, A. (11 September 2013). Accurate Single Point Incremental Forming Simulations using Solid-Shell Elements [Paper presentation]. First International Workshop on the Finite Element Code LAGAMINE (LAGASHOP 2013), Liège, Belgium.

Velosa De Sena, J., Guzmán Inostroza, C. F., Duchene, L., Habraken, A., Alves de Sousa, R. J., & Angelo Valente, R. (11 September 2013). Adaptive remeshing technique for the single incremental forming simulations using solid-shell elements [Paper presentation]. First International Workshop on the Finite Element Code LAGAMINE.

Scientific congresses and symposiums

Published communications

Betaieb, E., Duchene, L., & Habraken, A. (In press). Identification and validation of Brass material parameters using single point incremental forming. In TMS Proceedings. New York City, United States: Springer Link. doi:10.1007/978-3-031-06212-4_79

Pham Quy Duc, T., Hoang, T. V., Tran, X. V., Fetni, S., Duchene, L., Tran, H. S., & Habraken, A. (2022). Uncertainty Quantification in the Directed Energy Deposition Process Using Deep Learning-Based Probabilistic Approach. In G. Vincze & F. Barlat (Eds.), Achievements and Trends in Material Forming- Peer-reviewed extended papers selected from the 25th International Conference on Material Forming, ESAFORM 2022. Trans Tech Publications Ltd. doi:10.4028/p-j9chvq

El Fetni, S., Duchene, L., Tran, H. S., & Habraken, A. (2021). Thermal field prediction in DED manufacturing process using Artificial Neural Network. In A. Habraken, L. Duchene, ... A. Mertens, ESAFORM 2021: The 24th International ESAFORM Conference on Material Forming. Liège, Belgium: PoPuPs. doi:10.25518/esaform21.2812

Yuan, S., Habraken, A., Milis, O., & Duchene, L. (2019). Study of High Purity Nickel with Various Grain Sizes Using Shear Tests. AIP Conference Proceedings. doi:10.1063/1.5112755

Tomé Jardin, R. A., Tchuindjang, J. T., Duchene, L., Carrus, R., Mertens, A., Habraken, A., & Tran, H. S. (2019). Numerical analysis of thermal stress in laser cladding technology of M4 High Speed Steel. In Y. Korkolis, B. Kinsey, M. Knezevic, ... Padhye, Proceedings of NUMIFORM 2019: The 13th International Conference on Numerical Methods in Industrial Forming Processes.

Tuninetti, V., Flores, P., Medina, C., Duchene, L., & Habraken, A. (2019). Effect of small strain rate variations on the identification of the compressive behaviour of Ti6Al4V. In Proceedings of Giens 2019.

Betaieb, E., Yuan, S., Guzman, C. F., Duchene, L., & Habraken, A. (16 April 2019). Prediction of cracks within cones processed by single point incremental forming. Procedia Manufacturing, 29 (2019), 96-104. doi:10.1016/j.promfg.2019.02.111

Morch, H., Duchene, L., & Habraken, A. (August 2018). Identification method of an advanced constitutive law for nickel-based alloy Haynes 230 used in solar receivers. Journal of Physics. Conference Series, 1063. doi:10.1088/1742-6596/1063/1/012149

Yuan, S., Duchene, L., Milis, O., Keller, C., Hug, E., & Habraken, A. (July 2018). A Novel Geometry for Shear Test Using Axial Tensile Setup. Proceedings, 2. doi:10.3390/ICEM18-05277

Morch, H., Duchene, L., & Habraken, A. (2017). Visco-plastic Chaboche model for nickel-based alloys under anisothermal cyclic loading. In Proceedings of the XIV International Conference on Computational Plasticity.

Hoang, S. T., Tummala, H., Duchene, L., Péron Luhrs, V., Fivel, M., & Habraken, A. (2015). Interaction between dislocation and coherent twin boundary by quasicontinuum model. In Proceedings of XIII International Conference on Computational Plasticity. Fundamentals and Applications COMPLAS ebook open accesss XIII.

Velosa De Sena, J., Duchene, L., Habraken, A., Angelo Valente, R., & Alves de Sousa, R. J. (2014). Numerical Simulation of a Conical Shape Made by Single Point Incremental Forming. In Incremental sheet forming.

Velosa De Sena, J., Guzmán Inostroza, C. F., Duchene, L., Habraken, A., Angelo Valente, R., & Alves de Sousa, R. J. (2014). Numerical Simulation of a Conical Shape Made By Single Point Incremental. In Incremental sheet forming.

marandi, K., vayrette, R., Pardoen, T., Duchene, L., & Habraken, A. (2013). Bauschinger effect in thin metallic films by Fem simulations. In XII International Conference on Computational Plasticity. Fundamentals and Application COMPLAS XII , Barcelone 3-5 septembre 2013.

Duchene, L., Ben Bettaieb, A., Tuninetti Vásquez, V., & Habraken, A. (2013). Numerical modeling and digital image correlation strain measurements of coated metal sheets submitted to large bending deformation. In Proceedings of the 16th ESAFORM conference on Material Forming.

Gilles, G., Habraken, A., Cazacu, O., Balan, T., & Duchene, L. (2013). Experimental and numerical study of TA6V mechanical behavior under different quasi-static strain paths at room temperature. AIP Conference Proceedings, 1532, 651-656. doi:10.1063/1.4806890

Ben Bettaieb, A., Duchene, L., Zhang, L., & Habraken, A. (2011). New Solid-Shell Finite Element Based on EAS and ANS Concepts for Sheet Metal Forming. AIP Conference Proceedings, 1383, 374-381. doi:10.1063/1.3623634

Ben Bettaieb, M., Van Hoof, T., Zhang, L., Minnebo, H., Dufour, P., Jacques, P. J., Duchene, L., & Habraken, A. (2011). Investigation of the efficiency of the Ti555 compared with TA6V alloy in the case of an aeronautic application. The 12th World Conference on Titanium Ti-2011.

Ben Bettaieb, M., Van Hoof, T., Zhang, L., Minnebo, H., Dufour, P., Jacques, P. J., Duchene, L., & Habraken, A. (2011). Investigation of the Efficiency of the Ti555 Compared with TA6V Alloy in the Case of an Aeronautic Application. In Proceedings of the 12th World Conference on Titanium (pp. 1969-1973).

Duchene, L., Ben Bettaieb, A., & Habraken, A. (2011). Assessment of the enhanced assumed strain (EAS) and the assumed natural strain (ANS) techniques in the mechanical behavior of the SSH3D solid-shell element. Complas XI.

Gilles, G., Tuninetti Vásquez, V., Ben Bettaieb, M., Cazacu, O., Habraken, A., & Duchene, L. (2011). Experimental characterization and constitutive modeling of TA6V mechanical behavior in plane strain state at room temperature. AIP Conference Proceedings, 1383. doi:10.1063/1.3623595

Hammami, W., Tirry, W., Coghe, F., Duchene, L., Delannay, L., & Habraken, A. (2011). Ti6A14V Anisotropy and Texture Evolution Predictions Using Multisite and Self Consistent Crystal Plasticity Models. In Proceedings of the 12th World conference on Titanium (pp. 950-953).

Verleysen, P., Peirs, J., & Duchene, L. (2011). Determination of the high strain rate forming properties of steel sheet. Complas XI.

Zhang, L., Ben Bettaieb, A., Habraken, A., & Duchene, L. (April 2010). Temperature wrinkling prediction in metal/polymer multilayer coatings. International Journal of Material Forming, 3 (supplement 1), 559-562. doi:10.1007/s12289-010-0831-z

Bouffioux, C., Pouteau, P., Duchene, L., Vanhove, H., Duflou, J. R., & Habraken, A. (2010). Material data identification to model the single point incremental forming process. International Journal of Material Forming, 3 (Suppl. 1), 979-982. doi:10.1007/s12289-010-0933-7

Gilles, G., Habraken, A., & Duchene, L. (2010). Material parameter identification of Cazacu's model for Ti6Al4V using the simulated annealing algorithm. Materials Science Forum, 636-637, 1125-1130. doi:10.4028/www.scientific.net/MSF.636-637.1125

Keller, C., Afteni, M., Banu, M., Habraken, A., Hug, E., Castagne, S., & Duchene, L. (2010). Influence of Surface Effect On Nickel Micro Deep Drawing Process. In Proceeding of the Numiform 2010 conference (pp. 1025-1030). American Institute of Physics.

Keller, C., Habraken, A., Hug, E., & Duchene, L. (2010). Miniaturization induced size effects: Experimental and numerical investigation of size effects linked to the miniaturization of metallic components. In Scale transition for plastic crystalline and microstructured materials: from experiment to numerical modeling.

Marmi, A., Habraken, A., & Duchene, L. (2010). Multiaxial fatigue damage modeling of Ti6Al4V alloy. In Proceedings of the ICMFF9 Conference.

Rabahallah, F., Bouffioux, C., Duchene, L., Vanhove, H., Duflou, J. R., & Habraken, A. (2010). Optimized Remeshing for Incremental Forming Simulation. In Proceedings of the Advances in Materials and Processing Technologies Conference.

Ben Bettaieb, M., Lemoine, X., Duchene, L., & Habraken, A. (2009). The Role of Void Evolution on the bendability of Steel Sheets. In E. Oñate & D. R. J. Owen (Eds.), Computational plasticity X. Fundamentals and applications.

Gerday, A.-F., Ben Bettaieb, M., Pascon, F., Duchene, L., & Habraken, A. (2009). Numerical Modeling of Representative Cells of Ti-5553 Using Periodic Homogenization Technique. In E. Oñate & D. R. J. Owen (Eds.), Computational plasticity X. Fundamentals and applications.

Hammami, W., Bouvier, S., Duchene, L., Delannay, L., & Habraken, A. (2009). Crystal Plasticity Modelling of Monotonic Shear Tests on Pure Titanium. In E. Oñate & D. R. J. Owen (Eds.), Computational plasticity X. Fundamentals and applications.

Hammami, W., Delannay, L., Duchene, L., & Habraken, A. (August 2009). Crystal plasticity prediction of Lankford coefficient using the MULTISITE model: influence of the critical resolved shear stresses. International Journal of Material Forming, 2 (Supplément 1), 65 - 68. doi:10.1007/s12289-009-0573-y

Ben Bettaieb, M., Lemoine, X., Duchene, L., & Habraken, A. (2009). Study of the formability of steels. In Proceedings of the International ESAFORM Conference 2009.

Duchene, L., Geers, M. G. D., Brekelmans, W. A. M., Chen, E., Verlinden, B., & Habraken, A. (2008). Multiscale modeling of equal channel angular extruded aluminium with strain gradient crystal plasticity and phenomenological models. In A. Rollett (Ed.), Proceedings of the 15th International Conference on the Texture of Materials (ICOTOM-15).

Habraken, A., Gerday, A.-F., & Duchene, L. (2008). Multiscale finite element study of Ti-555. In Akhtar S. Khan, Babak Farrokh, M. Baig, A. Pandey, C. Meredith, S. Yu, ... H. Liu (Eds.), Proceedings of the 14th International Symposium on Plasticity & Its Current Applications, Mechanics & Mechanisms of Finite Plastic Deformation (pp. 265-267). Neat Press.

Li, X., Cescotto, S., & Duchene, L. (2008). Application of a three-field natural neighbour method in elastoplasticity. In Proceedings of the 8th World Congress on Computational Mechanics (WCCM8).

Duchene, L., Diouf, B., Lelotte, T., Flores, P., Bouvier, S., & Habraken, A. (2007). Study of axes rotation during simple shear tests on aluminium sheets. In J. M. A. César de Sa & A. D. Santos (Eds.), Proceedings of the 9th International Conference NUMIFORM 2007 (AIP Conference Proceedings 908, pp. 399-404).

Habraken, A., Gerday, A.-F., Diouf, B., & Duchene, L. (2007). Comparisons of FEM approaches modelling the metal plastic behaviour. In E. Cueto & F. Chinesta, Proceedings of the 10th ESAFORM Conference on Material Forming (pp. 1478-1483). Springer. doi:10.1063/1.2729724

Duchene, L., de Montleau, P., & Habraken, A. (2006). Development and performance assessment of an improved 8-node mixed type FEM element. In N. Juster & A. Rosochowski (Eds.), Proceedings of the 9th International ESAFORM Conference on Material Forming (pp. 135-138). Krakow, Poland: Akapit.

Lelotte, T., Duchene, L., & Habraken, A. (2006). Fast method to predict an earing profile based on Lankford coefficients and yield locus. In C. A. Mota Soares (Ed.), Proceedings of the III European Conference on Computational Mechanics Solids (ECCM III). Dodrecht, Netherlands: Springer.

Duchene, L., de Montleau, P., El Houdaigui, F., Bouvier, S., & Habraken, A. (2005). Analysis of Texture Evolution and hardening Behavior during Deep drawing with an improved mixed type FEM Element. In L. M. Smith, F. Pourboghrat, J. W. Yoon, ... T. B. Stoughton (Eds.), On the Cutting Edge of Technology, NUMISHEET 2005, 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (AIP Conference proceedings, Vol 778, pp. 409-414). Melville (New York), United States: American Institue of Physics (AIP).

Duchene, L., El Houdaigui, F., & Habraken, A. (2005). Finite element simulations of the swift effect. In P. F. Bariani (Ed.), Proceedings of the ICTP 2005 International Conference on Technology of Plasticity.

El Houdaigui, F., Duchene, L., Habraken, A., Poortmans, S., & Verlinden, B. (2005). Anisotropic yield locus of ultrafine-grained aluminium produced by Equal Channel angular extrusion. In E. Onate & D. R. J. Owen (Eds.), Proceedings of the VIII International Conference on Computational Plasticity (COMPLAS VIII) (pp. 1170-1173).

Flores, P., Duchene, L., Lelotte, T., Bouffioux, C., El Houdaigui, F., Van Bael, A., He, S., & Habraken, A. (2005). Model identification and FE simulations: effect of different yield loci and hardening laws in sheet forming. In L. M. Smith, F. Pourboghrat, J. W. Yoon, ... T. B. Stoughton (Eds.), On the Cutting Edge of Technology NUMISHEET 2005, Proceedings of the 6th International Conference and Workshop on Numerical Simulation of 3D Sheet Metal Forming Processes (AIP Confernce Proceedings, Vol 778, pp. 371-381). Melville (New York), United States: American Institute of Physics (AIP).

Lelotte, T., Gerday, A.-F., Flores, P., Bouvier, S., Van Houtte, P., Habraken, A., & Duchene, L. (2005). Axes rotation during simple shear test: Measurement and predictions. In E. Oñate & D. R. J. Owen (Eds.), Proceedings of the VIII International Conference on Computational Plasticity (COMPLAS VIII).

de Montleau, P., Duchene, L., Bouvier, S., Flores, P., & Habraken, A. (2004). Deep drawing process with different elasto-plastic law. In S. Stören (Ed.), Proceedings of the 7th ESAFORM conference on Material Forming (pp. 163-166). Norwegian University of Sciences and Technology.

Duchene, L., de Montleau, P., Bouvier, S., & Habraken, A. (2004). Deep drawing simulations with different polycrystalline models. In S. Gosh, J. M. Castro, ... J. K. Lee (Eds.), Materials Processing and Design: Modeling, Simulation and Applications (NUMIFORM 2004) (pp. 588-593). American Institute of Physics AIP Conference Proceedings.

Duchene, L., Delannay, L., & Habraken, A. (2004). Finite element prediction of the swift effect based on Taylor-type polycrystal plasticity models. In S. Stören (Ed.), Proceedings of the 7th ESAFORM conference on Materials Forming (pp. 171-174). Norwegian University of Sciences and Technology.

Van Bael, A., He, S., Van Houtte, P., Delannay, L., Duchene, L., & Habraken, A. (2004). Finite-element simulations of cup drawing using the taylor and the lamel model. In S. Stören (Ed.), Proceedings of the 7th ESAFORM conference on Materials Forming (pp. 215-218). Norwegian University of Sciences and Technology.

Cescotto, S., Duchene, L., Pascon, F., & Habraken, A. (2003). Numerical modelling of metal forming - current practice and advanced applications. In V. P. Iu, L. N. Lamas, Y. P. Li, ... K. M. Mok (Eds.), Computational Methods in Engineering and Science, lu et al. (eds), Proceedings of the 9th International Conference of enhancement and Promotion of Computing Methods for Engineering and Science (A.A. Balkema Publishers, pp. 25-36). Lisse, Netherlands: Swets & Zeitlinger.

de Montleau, P., Duchene, L., Flores, P., & Habraken, A. (2003). Numerical shear tests for different elasto-plastic laws. In E. Onate & D. R. J. Owen, Proceedings of the VII International Conference on Computational Plasticity (COMPLAS 2003). Barcelona, Spain: CIMNE.

Duchene, L., Godinas, A., Cescotto, S., & Habraken, A. (2003). Micro-macro analysis of steel sheet behaviour in finite element simulations. Application to deep-drawing process. Journal de Physique IV, 105. doi:10.1051/jp4:20030191

Duchene, L., Godinas, A., Cescotto, S., & Habraken, A. (2002). Micro-macro analysis of steel sheet behaviour in finite element simulations. Application to deep-drawing process. In S. Cescotto, Proceedings of the Sixth European Mechanics of Materials Conference (EMMC6) Non Linear Mechanics of Anisotropic Materials (pp. 337-344).

Flores, P., Duchene, L., & Habraken, A. (2002). Texture analysis of cylindrical cup during deep-drawing process. In D. Y. Yang, S. I. Oh, H. Huh, ... Y. H. Kim, Proceedings of the 5th international conference NUMISHEET 2002 (pp. 605-610).

Duchene, L., Godinas, A., Habraken, A., & Cescotto, S. (2001). Modelling of the micro-mechanical behaviour of steel sheets during deep-drawing. In J. R. Duflou, M. Geiger, H. J. J. Kals, B. Shirvani, ... U. P. Singh, Proceedings of the 9th International Conference on Sheet Metal (pp. 631-638).

Duchene, L., Godinas, A., Habraken, A., & Cescotto, S. (2001). Micro-mechanical analysis of steel sheet behaviour during deep-drawing. In Proceedings of the First Asian-Pacific Congress on Computational Mechanics: APCOM 2001.

Duchene, L., Habraken, A., & Godinas, A. (2001). Influence of steel anisotropy during deep-drawing process. In A. Habraken, Proceedings of the 4th international Conference ESAFORM (pp. 461-464).

Duchene, L., Habraken, A., & Godinas, A. (2001). Implementation of a texture based interpolated yield locus in a FEM code. In Balkema, Proceedings of NUMIFORM 2001 (Simulation of Materials Processing: Theory, Methods and Applications) (pp. 203-208). Tokyo, Japan: Mori Editor.

Duchene, L., Habraken, A., & Godinas, A. (2000). Validation of a FEM model coupled with texture applied to deep drawing process. In Proceedings of the 3rd ESAFORM Conference on Material Forming (pp. 3 à IV-6). Stuttgart, Germany: Frits Editor.

Wauters, M., Habraken, A., & Duchene, L. (2000). A fully coupled elasto-plastic damage model applied to anisotropic materials. In J. L. Tassoulas (Ed.), Proceedings of the 14th Engineering Mechanics Conference (pp. 6).

Wauters, M., Habraken, A., & Duchene, L. (2000). A fully coupled elasto-plastic damage model applied to anisotropic materials [Paper presentation]. 3rd ESAFORM Conference on Material Forming, Stuttgart, Germany.

Duchene, L., Godinas, A., & Habraken, A. (1999). Texture effects on steel sheet behaviour under large strain simulations. In 12th International Conference on Texture of Materials (ICOTOM12).

Duchene, L., Godinas, A., & Habraken, A. (1999). Metal plastic behaviour linked to texture analysis and FEM method. In 4th International Conference NUMISHEET 1999.

Duchene, L., Habraken, A., & Cescotto, S. (1999). Elastoplastic anisotropic model based on texture analysis to simulate steel sheet behavior. In 7th International Symposium on Plasticity.

Habraken, A., Radu, J.-P., Duchene, L., Wauters, M., & Munhoven, S. (1998). Comparisons of anisotropic elastoplastic laws applied to steel sheet. In International Conference NUMIFORM 1998.

Oral communications or posters

Habraken, A., Jardin Tome, R., Pham Quy Duc, T., Tchuindjang, J. T., Carrus, R., Tuninetti, Duchene, L., Mertens, A., Hoang, T. V., & Tran Xuan Van. (05 October 2023). Simulations of Directed Energy Deposition process, High Speed Steel [Paper presentation]. 3rd International Workshop on Plasticity, Damage and Fracture of Engineering Materials, 4-6 October 2023, İstanbul, Türkiye (Hybrid), Istanbul, Turkey.

Rojas Ulloa, C. E., Morch, H., Tchuindjang, J. T., Pensis, O., Di Giovanni, A., Mertens, A., Duchene, L., Tuninetti, V., & Habraken, A. (03 July 2023). Creep mechanisms of Incoloy 800H at high temperature [Paper presentation]. Thermec 2023 The International Conference on PROCESSING & MANUFACTURING OF ADVANCED MATERIALS Processing, Fabrication, Properties, Applications, Vienne, Austria.

Habraken, A., Bouffioux, C., Dedry, O., Fetni Seif, Sepulveda, H., Duchene, L., & Mertens, A. (25 May 2023). Fatigue crack prediction in Multiphasic-Phasic Material [Paper presentation]. 3rd Benelux Network Meeting and Workshop on Damage and Fracture Mechanics (BDFM-2023).

Rojas Ulloa, C., Morch, H., Tuninetti Vásquez, V., Tchuindjang, J. T., Mertens, A., Duchene, L., Habraken, A., Pensis, O., & Di Giovanni, A. (23 May 2023). Accurate very-high temperature creep-life prediction of Incoloy 800H addressing effects of creep mechanism transition and nitridation [Paper presentation]. ECCC23, Edimburgh, United Kingdom.

Rojas Ulloa, C., Morch, H., Betaieb, E., Tuninetti, V., Duchene, L., & Habraken, A. (31 August 2022). Assessment of the influence of creep transition and nitridation in the creep-life prediction of Incoloy 800H [Paper presentation]. ACOMEN, Liège, Belgium.

Bouffioux, C., Papeleux, L., Tran, H. S., Ponthot, J.-P., Duchene, L., & Habraken, A. (28 April 2022). Development of a 2.5D Representative Volume Element model of AlSi10Mg material produced by additive manufacturing [Paper presentation]. ESAFORM 2022, Braga, Portugal.

El Fetni, S., Delahaye, J., Duchene, L., Mertens, A., & Habraken, A. (28 February 2022). Adaptive time stepping approach for Phase-Field modeling of phase separation and precipitates coarsening in additive manufacturing alloys [Paper presentation]. COMPLAS 2021 - XVI International Conference on Computational Plasticity, Barcelone, Spain. doi:10.23967/complas.2021.009

El Fetni, S., Delahaye, J., Duchene, L., Mertens, A., & Habraken, A. (07 September 2021). Presentation: Adaptive time stepping approach for Phase-F1ield modeling of phase separation and precipitates coarsening in additive manufacturing alloys [Paper presentation]. COMPLAS 2021, Barcelona, Spain.

Betaieb, E., Duchene, L., & Habraken, A. (19 September 2019). Identification and identifiability methods of metal sheet parameters [Poster presentation]. Forming Technology Forum 2019, Munich, Germany.

Duchene, L., Morch, H., & Habraken, A. (04 June 2019). Improved Temperature Dependence of the Material Parameters in a Visco-plastic Chaboche Law for an Accurate Cyclic Hardening Modelling [Paper presentation]. The 8th edition of the International Conference on Computational Methods for Coupled Problems in Science and Engineering (COUPLED PROBLEMS 2019), Sitges, Spain.

Tomé Jardin, R. A., Tchuindjang, J. T., Duchene, L., Carrus, R., Pesci, R., Mertens, A., Habraken, A., & Tran, H. S. (27 May 2019). Thermo-Mechanical laser cladding simulations of M4 High Speed Steel [Paper presentation]. 4th workshop of Metal Additive Manufacturing, Leuven, Belgium.

Morch, H., Duchene, L., & Habraken, A. (22 January 2019). Modélisation de l'endommagement de fluage-fatigue d'un alliage de Nickel pour récepteur solaire [Poster presentation]. Aussois 2019 - Rupture des matériaux et des structures, Aussois, France.

Tomé Jardin, R. A., Tran, H. S., Hashemi, S. N., Tchuindjang, J. T., Carrus, R., Duchene, L., Mertens, A., & Habraken, A. (25 April 2018). 2D FE Simulations of High Speed Steel Laser Cladding Process [Paper presentation]. ESAFORM, Palermo, Italy.

Bouffioux, C., Canales Cardenas, C., Duchene, L., Ponthot, J.-P., & Habraken, A. (June 2017). FATIGUE CRACK PROPAGATION IN HSS S690QL WELDED CONNECTIONS IN BRIDGES [Paper presentation]. 14th International Conference on Fracture - ICF14, Rhodes, Greece.

Bouffioux, C., Habraken, A., Duchene, L., & Canales Cardenas, C. (03 May 2017). Characterization of Fatigue Behaviour, from Material Science to Civil Engineering Applications [Paper presentation]. Design Guidelines for Optimal Use of HSS in Bridges - OptiBri Workshop, Stuttgart, Germany.

Habraken, A., Duchene, L., Bouffioux, C., & Canales Cardenas, C. (03 May 2017). OPTIBRI Opening and Project Overview [Paper presentation]. Design Guidelines for Optimal Use of HSS in Bridges - OptiBri Workshop, Stuttgart, Germany.

Tran, H. S., Brusten, R., Jardin, R., Paydas, H., Carrus, R., Duchene, L., Lecomte-Beckers, J., & Habraken, A. (03 November 2016). Laser Cladding Finite Element Modelling Application to Ti6Al4V [Paper presentation]. IAP INTEMATE Plenary session meeting, Gent, Belgium.

Tran, H. S., Duchene, L., Tummala, H., Peron Luhrs, V., Fivel, M., & Habraken, A. (07 September 2016). Quasicontinuum analysis of interaction between screw dislocation and coherent twin boundary [Paper presentation]. 15th European Mechanics of Materials Conference, Brussels, Belgium.

Keller, C., Hug, E., Duchene, L., & Habraken, A. (04 January 2015). Effect of stress path on the miniaturizatio size effect for nickel polycrystals [Paper presentation]. PLASTICITY, DAMAGE & FRACTURE 2015, Montego Bay, Jamaica.

Duchene, L., Marmi, A., & Habraken, A. (September 2014). Assessment of a multiscale fatigue damage model associated with stress gradient effects [Poster presentation]. The 10th International Conference on Fatigue Damage of Structural Materials, Hyannis, United States.

Velosa De Sena, J., Duchene, L., Habraken, A., Angelo Valente, R., & Alves de Sousa, R. J. (27 June 2013). Single Point Incremental Forming using Adaptive Remeshing Technique with Solid-Shell Finite Elements [Paper presentation]. Cogress on Numerical Methods in Engineering CNME, Bilbao, Spain.

de Sena, J. I., Duchene, L., Habraken, A., Alves de Sousa, R., & Valente, R. (24 April 2013). Adaptive remeshing strategies using solid-shell elements in the numerical simulation of incremental forming processes [Paper presentation]. ESAFORM 2013, Aveiro, Portugal.

Habraken, A., Gilles, G., Tuninetti Vásquez, V., Duchene, L., Hammami, W., delannay, L., bouvier, S., Bacroix, B., chauveau, T., & hug, E. (January 2013). Identification and validation of CRSS values for Ti6Al4V alloy [Paper presentation]. PLASTICITY 2013 , Symposium to honour Paul Van Houtte, BAHAMAS, United States.

Duchene, L., Ben Bettaieb, A., Zhang, L., & Habraken, A. (September 2010). Effect of the enhanced assumed strain technique on the wrinkling prediction of thin aluminum film coated sheets [Paper presentation]. SolMech conference, Warsaw, Poland.

Habraken, A., Hammami, W., Gilles, G., & Duchene, L. (May 2010). Multiscale approach to describe the mechanical behaviour of Ti6Al4V alloys [Paper presentation]. 4th European Conference on Computational Mechanics (Solids, Structures and Coupled Problems in Engineering), Paris, France.

Diarra, H., Gerday, A.-F., Ben Bettaieb, M., Pascon, F., Duchene, L., & Habraken, A. (2010). Study of the effects of α-grain proportion, shape and orientation on the mechanical behavior of Ti-5553 by FE simulations [Paper presentation]. Advances in Materials and Processing Technologies (AMPT 2010), Paris, France.

Gilles, G., Hammami, W., Libertiaux, V., Habraken, A., Cazacu, O., & Duchene, L. (2010). Experimental characterization and constitutive modeling of TA6V titanium mechanical behavior in tension and compression [Paper presentation]. 37th Solid Mechanics Conference, Warsaw, Poland.

Hammami, W., Duchene, L., Delannay, L., Bouvier, S., Coghe, F., Tirry, W., & Habraken, A. (2010). Critical resolved shear stresses and hardening parameter optimisation using crystal plasticity model for Ti6AL4V sheet based on simple tension tests & texture evolution [Paper presentation]. 2nd International Symposium Computational Mechanics of Polycrystals, Bad Honnef, Germany.

Duchene, L., Bouvier, S., & Habraken, A. (September 2009). Accurate earing profile prediction during deep drawing with microstructure based hardening and crystal plasticity models [Paper presentation]. International Conference on Material Modelling (ICMM 2009), Dortmund, Germany.

Book chapters and contributions to collective works

Duchene, L., & Habraken, A. (2007). Multiscale Approaches. In F. Chinesta & E. Cueto, Advances in Material Forming - Esaform 10 years on (pp. 125-141). doi:10.1007/978-2-287-72143-4_8

Habraken, A., Duchene, L., Godinas, A., & Cescotto, S. (2001). Anisotropic elastoplastic model based on texture. In Handbook of materials behavior models.

Theses and dissertations

Doctoral thesis

Duchene, L. (2003). FEM study of metal sheets with a texture based, local description of the yield locus [Doctoral thesis, ULiège - Université de Liège]. ORBi-University of Liège. https://orbi.uliege.be/handle/2268/135058

Master dissertations

Duchene, L. (2000). Implementation of a yield locus interpolation method in the finite element code LAGAMINE [Specialised master, ULiège - Université de Liège]. ORBi-University of Liège. https://orbi.uliege.be/handle/2268/135086

Other publications and communications

Speeches and writings for a general audience

Others

Habraken, A., Duchene, L., Bouffioux, C., & Canales Cardenas, C. (2017). Optimal use of High Strength Steel grades within bridge.

Duchene, L. (2012). Approches multi-échelles et éléments finis Solid-Shell [Paper presentation]. Leçon inaugurale, Liège, Belgium.