Publications et communications de Frederic Pascon

LégendeIndices bibliométriques liés à la revue (pour celles dont l'ISSN a été indiqué par l'auteur) IF = Impact factor Thomson ISI. Sont indiqués : IF de l’année de publication et IF de la dernière édition du JCR (last), « ? » si pas encore connu d'ORBi ; « - »  si inexistant. IF5 : idem que IF mais pour une période de 5 ans (nouvel indice depuis 2009). EigenF = EigenFactor (voir : http://www.eigenfactor.org/). Article Infl. = Article Influence : EigenFactor divisé par le nombre d’articles publiés dans cette revue. En savoir plus ? http://orbi.ulg.ac.be/rpt#revIndices bibliométriques liés à l'article ORBi viewed = nombre total de visualisations de la référence sur ORBi (dont X en interne à ULg). ORBi downloaded = nombre total de téléchargements du texte intégral via ORBi, y compris tirés à part. SCOPUS® = nombre de citations du document repérées par SCOPUS®. En savoir plus ? http://orbi.ulg.ac.be/rpt#art(Avertissement : en fonction des disciplines, certains indicateurs bibliométriques peuvent ne pas se révéler pertinents)__________________________________ , , etc: texte intégral du document disponible en Open Access , , etc: texte intégral du document disponible en accès restreint Peer reviewed (vérifié par ORBi) : l'information est présente dans la base ORBi des périodiques

1. Thèses et mémoires

1.b. Thèses de doctorat

Pascon, F. (2002). 2D1/2 Thermal-Mechanical Model of Continuous Casting of Steel Using Finite Element Method. Unpublished doctoral thesis, Université de Liège, ​​Belgique.
Jury: Habraken, A. (Promotor).
ORBi viewed: 69 (16 ULg) ; downloaded: 74 (10 ULg)
The thesis deals with a numerical model based on the finite element method applied to the continuous casting of steel. The model is developed using the LAGAMINE finite element code and two industrial ...

3. Articles dans des revues scientifiques avec peer reviewing

3.a. À portée internationale

En tant que premier ou dernier auteur

Pascon, F., & Habraken, A. (2007). Finite element study of the effect of some local defects on the risk of transverse cracking in continuous casting of steel slabs. Computer Methods in Applied Mechanics & Engineering, 196, 2285-5599.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 58 (5 ULg) ; downloaded: 82 (1 ULg) — SCOPUS®: 7
IF 2007: 1.488; last: 2.617; IF5: 2.738 — EigenF 2007: 0.0361; last: 0.0403 — Article Infl. 2007: 1.1461; last: 1.2625
This paper introduces a numerical 2.5D model of continuous casting of steel slabs. This model is based on the finite element method and it has been applied to the study of some local defects in a continuous ...
Pascon, F., Cescotto, S., & Habraken, A. (2006). A 2.5 D finite element model for bending and straightening in continuous casting of steel slabs. International Journal for Numerical Methods in Engineering, (68), 125-149.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 109 (1 ULg) ; downloaded: 3 — SCOPUS®: 4
IF 2006: 1.497; last: 2.056; IF5: 2.291 — EigenF 2006: 0.0403; last: 0.0283 — Article Infl. 2006: 1.1761; last: 0.99
This paper presents a bi-dimensional slice model of the continuous casting process developed to focus on the risk of transverse cracking during bending and straightening of steel slabs. The model is based on ...
Pascon, F., Blès, G., Bouffioux, C., Casotto, S., Bruschi, S., & Habraken, A. (2004). Prediction of distortion during cooling of steel rolled rings using thermal-mechanical-metallurgical finite element model. Steel Grips 2, Supplement Metal Forming 1-3, 457-463.
Peer reviewed
ORBi viewed: 101 (10 ULg) ; downloaded: 189 (4 ULg)
This work takes place in the framework of a CRAFT European project gathering three universities, three companies who produce rings through the ring rolling process and a manufacturer of temperature and ...
Pascon, F., Habraken, A., Bourdouxhe, M., & Labory, F. (2000). Modélisation des phénomènes thermomécaniques dans une lingotière de coulée continue. Mécanique & Industries, 1, 61-70.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 103 (14 ULg) ; downloaded: 169 (2 ULg) — SCOPUS®: 1
IF: — EigenF 2000: -; last: 0.0004 — Article Infl. 2000: -; last: 0.1298
La qualité de surface et interne des produits de coulée continue dépend beaucoup du comportement du brin dans la lingotière durant la solidification. Parmi les paramètres susceptibles d’influencer ce ...

En tant que co-auteur

Rossi, B., Pascon, F., & Degée, H. (2009). Enhanced mechanical properties after cold process of fabrication of non-linear metallic profiles. Thin-Walled Structures, 47(12), 1575-1589.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 60 (20 ULg) ; downloaded: 4 (3 ULg) — SCOPUS®: 9
IF 2009: 1.054; last: 1.231; IF5: 1.612 — EigenF 2009: 0.0051; last: 0.0059 — Article Infl. 2009: 0.4562; last: 0.5087
It is well known that the cold-forming process is likely to significantly enhance the mechanical properties of the profile by strain hardening leading to increased resistance compared to a resistance ...
Casotto, S., Pascon, F., Habraken, A., & Bruschi, S. (2005). Thermo-mechanical-metallurgical model to predict geometrical distortions of rings during cooling phase after ring rolling operations. International Journal of Machine Tools & Manufacture, 45(6), 657-664.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 87 (12 ULg) ; downloaded: 136 (8 ULg) — SCOPUS®: 24
IF 2005: 1.057; last: 2.262; IF5: 2.877 — EigenF 2005: 0.0135; last: 0.0134 — Article Infl. 2005: 0.6953; last: 0.7193
The paper presents a validated numerical model able to predict geometrical distortions of rings during cooling phase after hot ring rolling operations. The model is capable to take into account the effects of ...
Castagne, S., Pascon, F., Blès, G., & Habraken, A. (2004). Developments in finite element simulations of continuous casting. Journal de Physique IV, 120, 447-455.
Peer reviewed
ORBi viewed: 56 (9 ULg) ; downloaded: 81 (2 ULg) — SCOPUS®: 7
IF 2004: 0.294; last: -; IF5: - — EigenF 2004: 0.0132; last: - — Article Infl. 2004: 0.1512; last: -
Two complementary approaches of steel continuous casting modelling using the finite element code LAGAMINE have been developed in the M&S Department. We propose here a description of the context in which the ...

9. Colloques et congrès scientifiques

9.b. Sur proposition personnelle

Publiées

À portée internationale
Avec peer reviewing
Kaux, J.-F., Drion, P., Colige, A., Pascon, F., Libertiaux, V., HOFFMANN, A., Janssen, L., HEYERES, A., Nusgens, B., LE GOFF, C., Gothot, A., Cescotto, S., Defraigne, J.-O., Rickert, M., & Crielaard, J.-M. (2012). Effects of platelet-rich plasma on the healing of tendons: animal model. Biomedica 2012 (pp. 180).
Peer reviewed
ORBi viewed: 38 (10 ULg) ; downloaded: 1
Introduction: Platelet-Rich Plasma (PRP) contains lot of growth factors which could enhance the healing process of different tissues. We aimed to determine if a single injection of PRP could improve the ...
Kaux, J.-F., Drion, P., Colige, A., Pascon, F., Libertiaux, LE GOFF, C., Gothot, A., Cescotto, S., Defraigne, J.-O., Rickert, M., & Crielaard, J.-M. (2011). Plasma enrichi en plaquettes et cicatrisation tendineuse : modèle sur rats. Annales de Réadaptation et de Médecine Physique, 54(1), 123.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 95 (18 ULg) ; downloaded: 5 (1 ULg)
Introduction: Le but de notre étude était de déterminer si une injection de plasma enrichi en plaquettes (PRP) pouvait améliorer et accélérer le processus de cicatrisation de tendons d'Achille de rats rompus ...
Kaux, J.-F., Drion, P., Colige, A., Pascon, F., Libertiaux, V., LE GOFF, C., Gothot, A., Cescotto, S., Defraigne, J.-O., Rickert, M., & Crielaard, J.-M. (2011). Platelet-rich plasma and tendons healing: rat model. Annales de Réadaptation et de Médecine Physique, 54(Sup 1), 125.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 30 (11 ULg) ; downloaded: 2 (2 ULg)
Kaux, J.-F., Drion, P., Colige, A., Pascon, F., Libertiaux, V., LE GOFF, C., Gothot, A., Cescotto, S., Defraigne, J.-O., Rickert, M., & Crielaard, J.-M. (2011). Platelet-rich plasma and tendons healing: rat model. Biomedica Life Science Summit (pp. 175).
Peer reviewed
ORBi viewed: 26 (12 ULg) ; downloaded: 8 (6 ULg)
Kaux, J.-F., Drion, P., Renouf, J., Pascon, F., Libertiaux, V., Colige, A., Le Goff, C., Lambert, C., Nusgens, B., Gothot, A., Cescotto, S., Defraigne, J.-O., Rickert, M., & Crielaard, J.-M. (2011). Platelet-rich plasma (PRP) and tendon healing: animal model. British Journal of Sports Medicine, 45(2), 1.
Peer reviewed
ORBi viewed: 117 (22 ULg) ; downloaded: 33 (4 ULg) — SCOPUS®: -
IF 2011: 4.144; last: 3.668; IF5: 3.985 — EigenF 2011: 0.0180; last: 0.0180 — Article Infl. 2011: 1.0188; last: 1.0188
Introduction: The tendon is a tissue which does not heal easily. Recently, several studies have demonstrated the positive effects of platelets on the healing process of tendons. A local injection of ...
Kaux, J.-F., Drion, P., Renouf, J., Pascon, F., Libertiaux, V., Colige, A., Hoffmann, A., Le Goff, C., Lambert, C., Nusgens, B., Gothot, A., Cescotto, S., Defraigne, J.-O., Rickert, M., & Crielaard, J.-M. (2010). Injection de concentrés plaquettaires et régénération tendineuse : modèle animal. 3ème Congrès Commun SFMS - SFTS (pp. 62).
Peer reviewed
ORBi viewed: 141 (18 ULg) ; downloaded: 8 (1 ULg)
Introduction : La régénération tendineuse en traumatologie du sport demeure un processus actuellement difficile à gérer et de nouvelles voies thérapeutiques sont en cours d’exploration. La littérature ...
Kaux, J.-F., Drion, P., Libertiaux, V., Pascon, F., Colige, A., Le Goff, C., Lambert, C., Nusgens, B., Cescotto, S., Defraigne, J.-O., Rickert, M., & Crielaard, J.-M. (2010). Le VEGF-111 comme nouvel outil thérapeutique des lésions tendineuses. 3ème Congrès Commun SFMS - SFTS (pp. 58).
Peer reviewed
ORBi viewed: 73 (18 ULg) ; downloaded: 8 (3 ULg)
Introduction : Les lésions tendineuses sont très fréquentes en traumatologie du sport et deviennent fréquemment chroniques. Pour ces raisons, de nouvelles thérapeutiques sont en cours de développement. Les ...
Kaux, J.-F., Drion, P., Renouf, J., Pascon, F., Libertiaux, V., Le Goff, C., Gothot, A., Cescotto, S., Defraigne, J.-O., Rickert, M., & Crielaard, J.-M. (2010). Platelet-Rich Plasma injection to improve tendon healing process. Osteoarthritis and Cartilage, 18(Supplement 2), 221.
Peer reviewed
ORBi viewed: 247 (16 ULg) ; downloaded: 13 (4 ULg) — SCOPUS®: -
IF 2010: 3.953; last: 4.262; IF5: 4.248 — EigenF 2010: 0.0226; last: 0.0232 — Article Infl. 2010: 1.2964; last: 1.2788
Introduction It is well known that injured tendons do not heal easily. For example, tendinopathy is a condition which often becomes chronic in the case of bad or late management. Recently, several studies ...
Kaux, J.-F., Drion, P., Libertiaux, V., Pascon, F., Colige, A., Le Goff, C., Lambert, C., Nusgens, B., Gothot, A., Cescotto, S., Defraigne, J.-O., Rickert, M., & Crielaard, J.-M. (2010). VEGF-111 as a new therapeutic tool for tendon lesion. Osteoarthritis and Cartilage, 18(Supplement 2), 22.
Peer reviewed
ORBi viewed: 127 (27 ULg) ; downloaded: 10 (5 ULg) — SCOPUS®: -
IF 2010: 3.953; last: 4.262; IF5: 4.248 — EigenF 2010: 0.0226; last: 0.0232 — Article Infl. 2010: 1.2964; last: 1.2788
Introduction: Tendon lesion is one of the most frequent pathology in sports and by physical workers. This pathology often becomes chronic. For this reason, it is of interest to develop new treatments ...
Kaux, J.-F., Le Goff, C., Drion, P., Libertiaux, V., Pascon, F., Colige, A., Lambert, C., Nusgens, B., Cescotto, S., Defraigne, J.-O., Rickert, M., & Crielaard, J.-M. (2010). New use of VEGF in therapeutics: application in tendon lesions. Clinical Chemistry, 56(S6), 111.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 70 (21 ULg) ; downloaded: 8 (6 ULg)
IF 2010: 6.886; last: 7.149; IF5: 7.192 — EigenF 2010: 0.0469; last: 0.0469 — Article Infl. 2010: 1.7463; last: 1.7463
Introduction: As demonstrated in previous studies, mechanical overload, injury and inflammation, hypoxic condition or any combination of the above could lead to increased expression of VEGF in the tendon. Thus ...
Kaux, J.-F., Le Goff, C., Drion, P., Pascon, F., Libertiaux, V., Gothot, A., Cescotto, S., Defraigne, J.-O., Rickert, M., & Crielaard, J.-M. (2010). Use of clinical biology techniques in clinical practice: injections of platelet-rich plasma to heal tendon. Clinical Chemistry, 56(S6), 111.
Peer reviewed
ORBi viewed: 58 (16 ULg) ; downloaded: 18 (4 ULg) — SCOPUS®: -
IF 2010: 6.886; last: 7.149; IF5: 7.192 — EigenF 2010: 0.0469; last: 0.0465 — Article Infl. 2010: 1.7463; last: 2.1494
Introduction: A tendon is a tissue which does not heal easily. For example, tendinopathy is a condition which often becomes chronic in the case of bad or overdue management. Several studies, essentially in ...
Kaux, J.-F., Drion, P., Pascon, F., Libertiaux, V., Le Goff, C., Gothot, A., Cescotto, S., Rickert, M., & Crielaard, J.-M. (2009). Le PRP (Platelet-Rich Plasma) peut-il favoriser la régénération tendineuse ? Annales de Réadaptation et de Médecine Physique, 52(Sup. 1), 109-e110.
Peer reviewed (vérifié par ORBi)
ORBi viewed: 573 (72 ULg) ; downloaded: 194 (16 ULg)
Introduction : Certaines tendinopathies (l’épicondylite, la tendinopathie rotulienne supérieure ou encore la tendinopathie d’Achille) demeurent rebelles malgré un traitement « classique » bien conduit : repos ...
Gerday, A.-F., Ben Bettaieb, M., Pascon, F., Duchene, L., & Habraken, A. (2009). Numerical Modeling of Representative Cells of Ti-5553 Using Periodic Homogenization Technique. In E., Oñate & D. R. J., Owen (Eds.), Computational plasticity X. Fundamentals and applications.
Peer reviewed
ORBi viewed: 133 (33 ULg) ; downloaded: 43 (13 ULg) — SCOPUS®: 0
This article focuses on the modeling of representative cells of Ti-5553 using the periodic homogenization theory and a microscopic constitutive law.
Noble, P., Collin, B., Denoix, J.-M., Serteyn, D., & Pascon, F. (2009, July). Estimation of joint contact forces in the equine digit. ISB proceedings.
Peer reviewed
ORBi viewed: 109 (29 ULg)
Libertiaux, V., & Pascon, F. (2009). Viscoelastic Modeling of Brain Tissue: A Fractional Calculus-Based Approach. In J.-F., Ganghoffer & F., Pastrone (Eds.), Mechanics of Microstructured Solids Cellular Materials, Fibre Reinforced Solids and Soft Tissues (pp. 81-90). Berlin, Germany: Springer.
Peer reviewed
ORBi viewed: 105 (12 ULg)
In recent years, the mechanical study of the brain has become a major topic in the field of biomechanics. A global biomechanical model of the brain could find applications in neurosurgery and haptic device ...
Studer, L., Detrembleur, S., Habraken, A., Pirotton, M., Pascon, F., & Dewals, B. (2008). Modelling the vertical spincasting of large bimettalic rolling mill rolls. Proceedings of the Second International Conference on Advances in Solidification Processes (ICASP-2).
Peer reviewed
ORBi viewed: 44 (10 ULg) ; downloaded: 95 (4 ULg)
In order to take into account the dynamic effects of molten metal during solidification, a methodology is presented to interface a metal solidification solver with a specifically developped flow dynamics solver.
Rossi, B., Habraken, A., & Pascon, F. (2007). On the evaluation of the through thickness residual stresses distribution of cold formed profiles. 10th International ESAFORM Conference on Material Forming : ESAFORM, Zaragoza, 18-20 April 2007 (pp. 570-577).
Peer reviewed
ORBi viewed: 78 (27 ULg) ; downloaded: 86 (6 ULg)
The aim of this research is to evaluate the through thickness residual stresses distribution in the walls and in the corners of a cold-formed open section made of a material presenting a non linear hardening ...
Studer, L., Habraken, A., Pirotton, M., Pascon, F., & Dewals, B. (2007). Modelling the vertical centrifugal casting of large bimetallic rolling mills. In E., Onate, M., Papadrakis, & B., Schrefler (Eds.), Proceedings of the Conference of Computational Methods for Coupled Problems in Science and Engineering 2 (pp. 141-144). Barcelona, Spain: CIMNE.
Peer reviewed
ORBi viewed: 74 (6 ULg) ; downloaded: 46 (2 ULg)
In order to take into account the dynamical effects of molten metal during solidification, we want to interface a metal solidification solver with a flow dynamics solver.
Pascon, F., Pecquet, E., Zhang, L., & Habraken, A. (2005). Modelling of semi-continuous casting of cupro-nickel alloys. In M., Papadrakakis, E., Onate, & B., Schrefler (Eds.), Proceedings of the International Conference on Computational Methods for Coupled Problems in Science and Engineering.
Peer reviewed
ORBi viewed: 69 (7 ULg) ; downloaded: 62 (2 ULg)
This research developed at University of Liege aims to optimize the complete semi-continuous casting process at LBP Company, a producer of copper-nickel alloys (or cupro-nickels). The process consists in ...
Casotto, S., Bruschi, S., Pascon, F., & Habraken, A. (2005). Development of a neural network to predict the final geometry of forged rings after cooling. In D., Banabic (Ed.), Proceedings of the 8th ESAFORM Conference on Material Forming (Vol. 2) (pp. 855-858). The publishing House of the Romanian Academy.
Peer reviewed
ORBi viewed: 35 (6 ULg) ; downloaded: 47 (6 ULg)
The paper deals with an application of Artificial Neural Networks (ANNs) to predict the geometry of hot forged pieces after cooling. Different ANNs have been considered and evaluated; then a network with two ...
Castagne, S., Pascon, F., Lecomte-Beckers, J., & Habraken, A. (2004). Mesoscopic model of intergranular cracks in low carbon steel during cooling of continuous casting. In M., Lamberigts, Proceedings of the 2nd international conference of thermomechanical processing of steels (TMP 2004) (pp. 233-240). Liège, Belgique: Stahl Eisen.
Peer reviewed
ORBi viewed: 38 (4 ULg) ; downloaded: 27 (1 ULg)
This paper addresses the problem of transverse cracking during the continuous casting of low carbon steel. The damage mechanisms occurring at high temperature during this process are identified and a numerical ...
Pascon, F., & Habraken, A. (2003). 2D1/2 thermo-mechanical model of continuous casting using FEM. In V., Brucato (Ed.), Proceedings of the 6th International ESAFORM Conference on Material Forming. Nuova Ipsa editore.
Peer reviewed
ORBi viewed: 41 (5 ULg) ; downloaded: 23 (2 ULg)
Two complementary approaches of steel continuous casting modelling using the finite element code LAGAMINE have been developed in the M&S Department. The first one (at a macroscopic scale) describes the whole ...
Cescotto, S., Duchene, L., Pascon, F., & Habraken, A. (2003). Numerical modelling of metal forming - current practice and advanced applications. In V. P., Iu, L. N., Lamas, Y. P., Li, & K. M., Mok (Eds.), Computational Methods in Engineering and Science, lu et al. (eds), Proceedings of the 9th International Conference of enhancement and Promotion of Computing Methods for Engineering and Science (A.A. Balkema Publishers, pp. 25-36). Lisse: Swets & Zeitlinger.
Peer reviewed
ORBi viewed: 30 (4 ULg) ; downloaded: 19 (4 ULg)
This paper first summarizes the current possibilities and the perspectives of effective modeling of metal forming processes. Practical considerations on manpower requirement and data availability are included ...
Castagne, S., Pascon, F., Miesse, G., & Habraken, A. (2003). Finite element analysis of continuous steel casting. Proceedings of the First International Conference Finite element for process analysis.
Peer reviewed
ORBi viewed: 138 (4 ULg) ; downloaded: 175 (1 ULg)
In order to analyse the behaviour of steel during continuous casting and to improve the process, two complementary models of steel continuous casting using the finite element code LAGAMINE have been developed ...
Castagne, S., Pascon, F., Bles, G., & Habraken, A. (2003). Developments in finite element simulations of continuous casting. Proceedings of the 2nd International Conference on Thermal Process Modelling and Computer Simulations (ICTPMCS).
Peer reviewed
ORBi viewed: 25 (4 ULg) ; downloaded: 16 (2 ULg)
Two complementary approaches of steel continuous casting modelling using the finite element code LAGAMINE have been developed in the M&S Department. We propose here a description of the context in which the ...
Pascon, F., & Habraken, A. (2002). Finite element thermo-mechanical model of continuous steel casting. In M., Kiuchi, H., Nishimura, & J., Yanagimoto, Proceedings of the 7th International Conference on Advanced Technology of Plasticity.
Peer reviewed
ORBi viewed: 36 (3 ULg) ; downloaded: 33 (1 ULg)
Problems in continuous casting of steel are numerous and have been leading producers to find ever more efficient solutions. Wa have developed a thermomechanical model of continuous casting, using a non-linear ...
Hubsch, P., Bourdouxhe, M., Pascon, F., & Habraken, A. (2002). Numerical simulation of the solidification of a beam blank in the mould. Proceedings of the 4th European Continuous Casting Conference (pp. 421-428). Birmingham: IOM Communications.
Peer reviewed
ORBi viewed: 69 (3 ULg) ; downloaded: 55 (1 ULg)
The stability of the casting process and the wear of the mould as well as the quality of the product depend strongly on the mould design. This is particularly true when considering the production of beam ...
Pascon, F., Habraken, A., Bourdouxhe, M., & Labory, F. (2001). Finite element modeling of thermo-mechanical behaviour of a steel strand in continuous casting. In A., Habraken, Proceedings of the 4th International Conference ESAFORM (pp. 867-870).
Peer reviewed
ORBi viewed: 23 (5 ULg) ; downloaded: 41 (2 ULg)
Surface and internal quality of continuous cast products depends very much upon the behaviour of the strand in the mould. Among the parameters likely to influence this behaviour, the mould taper takes a ...
Pascon, F., Habraken, A., Bourdouxhe, M., & Labory, F. (2001). Finite element modelling of thermo-mechanical behaviour of a steel strand in continuous casting. Proceedings of the 7th European Conference on Advanced Materials and processes (Euromat 2001).
Peer reviewed
ORBi viewed: 36 (5 ULg) ; downloaded: 49 (3 ULg)
An elastic-viscous-plastic constitutive law (Norton-Hoff type) is coupled to a contact law in a finite element code in order to model the behaviour of a steel strand in the mould of a continuous casting ...
Pascon, F., Habraken, A., Bourdouxhe, M., & Labory, F. (2000). Thermo-mechanical model of a strand in the mould of a continuous casting plant. Proceedings of the European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2000) (pp. 15).
Peer reviewed
ORBi viewed: 40 (8 ULg) ; downloaded: 63 (3 ULg) — SCOPUS®: 1
Surface and internal quality of continuous casts depends very much on the behaviour of the strand in the mould. Among the parameters likely to influence this behaviour, the mould taper takes a prominen tpart ...
À portée nationale
Kaux, J.-F., Drion, P., Renouf, J., Pascon, F., Libertiaux, V., Colige, A., Le Goff, C., Lambert, C., Nusgens, B., Gothot, A., Cescotto, S., Defraigne, J.-O., Rickert, M., & Crielaard, J.-M. (2010). Tendon lesion and platelet-rich plasma (PRP) injection: rat model. Annual Congress of the RBSPRM.
Peer reviewed
ORBi viewed: 69 (12 ULg) ; downloaded: 1 (1 ULg)
Introduction: For a few years, the positive effect of platelets on the healing process of different tissues (skin, bones...) was demonstrated. In fact platelets contain lots of growth factors which can be ...
Pecquet, E., Pascon, F., Lecomte-Beckers, J., & Habraken, A. (2003). Lingopti project: semi-continuous casting process of coper-nickel alloys. In E., Dick, J., Vierendeels, F., Cantrijn, G., Campion, & C., Lacor, Proceedings of the 6th national congress on theoretical and applied mechanics.
Peer reviewed
ORBi viewed: 71 (5 ULg) ; downloaded: 61 (1 ULg)
Lingopti project is a First Europe project. It treats semi-continuous casting of copper-nickel alloys ingots. The research, performed in the University of Liège, consists in the optimisation of the mould and ...
Pascon, F., Habraken, A., Bourdouxhe, M., & Labory, F. (2000). Thermomechanical model of the behaviour of a strand in continuous steel casting using finite element method. Proceedings of the 5ème Congrès national belge, Mécanique théorique et appliquée (pp. 239-242).
Peer reviewed
ORBi viewed: 9 (4 ULg) ; downloaded: 27 (1 ULg)

Communications uniquement orales ou poster

À portée internationale
Kaux, J.-F., Drion, P., Renouf, J., Pascon, F., Libertiaux, V., Colige, A., Le Goff, C., Lambert, C., Nusgens, B., Gothot, A., Cescotto, S., Defraigne, J.-O., Rickert, M., & Crielaard, J.-M. (2010, November 25). Tendon lesion and platelet-rich plasma (PRP) injection. Poster session presented at 6th Meeting of the EFOST, Brussels, Belgium.
Peer reviewed
ORBi viewed: 52 (11 ULg) ; downloaded: 28 (3 ULg)
Introduction: For a few years, the positive effects of platelets on the healing process of different tissues (skin, bones...) were demonstrated. In fact platelets contain lots of growth factors which can be ...
Kaux, J.-F., Drion, P., Libertiaux, V., Pascon, F., Colige, A., Le Goff, C., Lambert, C., Janssen, L., Nusgens, B., Gothot, A., Cescotto, S., Defraigne, J.-O., Rickert, M., & Crielaard, J.-M. (2010, November 25). Tendon lesion and VEGF-111 injection. Poster session presented at 6th Meeting of the EFOST, Brussels, Belgium.
Peer reviewed
ORBi viewed: 40 (12 ULg) ; downloaded: 18 (6 ULg)
Introduction: Tendon lesion is one of the most frequent pathology in sports and by physical workers. This pathology often becomes chronic. For this reason, it is of interest to develop new treatments ...
Kaux, J.-F., Drion, P., Pascon, F., Libertiaux, V., Le Goff, C., Gothot, A., Cescotto, S., Defraigne, J.-O., Rickert, M., & Crielaard, J.-M. (2010, March 20). Platelet-rich plasma (PRP) increases healing process of rats' Achilles tendons. Paper presented at VVS Biennial Congress for Sports Medicine and Sports Sciences, Brugge, Belgium.
Peer reviewed
ORBi viewed: 130 (36 ULg) ; downloaded: 73 (5 ULg)
Introduction Some tendinopathies (epicondylitis, jumper’s knee or Achilles tendinopathy) are frequently considered as rebel to “classic” treatments such as rest, orthotics, NSAIs, electrotherapy ...
Kaux, J.-F., Drion, P., Libertiaux, V., Pascon, F., Colige, A., Le Goff, C., Lambert, C., Nusgens, B., Gothot, A., Cescotto, S., Defraigne, J.-O., Rickert, M., & Crielaard, J.-M. (2010, March 20). Comparison between platelet-rich plasma (PRP) and vascular endothelial growth factor-111 (VEGF-111) as a therapeutic tool in tendon healing process. Poster session presented at VVS Biennial Congress for Sports Medicine and Sports Sciences, Brugge, Belgium.
Peer reviewed
ORBi viewed: 107 (33 ULg) ; downloaded: 12 (8 ULg)
Introduction In spite of the availability of various treatments for tendinopathy, this pathology often becomes chronic. For this reason, it is of interest to develop new treatments. Among them, the injection ...
Diarra, H., Gerday, A.-F., Ben Bettaieb, M., Pascon, F., Duchene, L., & Habraken, A. (2010). Study of the effects of α-grain proportion, shape and orientation on the mechanical behavior of Ti-5553 by FE simulations. Paper presented at Advances in Materials and Processing Technologies (AMPT 2010), Paris, France.
Peer reviewed
ORBi viewed: 48 (19 ULg) ; downloaded: 43 (8 ULg) — SCOPUS®: -