Publications and communications of Jean-Claude Golinval

Brégand, O., Hardy, Y., Gerkens, P., Golinval, J.-C., Hoffait, S., Bertha, M., Simon, D., Briault, P., & Van Eenennaam, J. (2023). Towards High Speed Galvanizing – Mastering Wiping Conditions Using Hydrodynamic Pads Strip Stabilization. In Proceedings of GALVATECH 2023. Séoul, South Korea: The Corrosion Science Society of Korea (CSSK).

Delhez, E., Nyssen, F., Golinval, J.-C., & Batailly, A. (03 February 2023). Numerical study of bladed structures with geometric and contact nonlinearities. Journal of Sound and Vibration, 544, 117382. doi:10.1016/j.jsv.2022.117382

Denis, S., Hoffait, S., Ligot, J., Lengele, M., Mahy, P., de Cazenove, J., & Golinval, J.-C. (2022). Development of an autonomous experimental system to identify BLISK mistuning. In ISMA-USD Conference, Conference Proceedings of ISMA2022 - USD2022. Leuven, Belgium: ISMA-USD Conference.

Delhez, E., Nyssen, F., Golinval, J.-C., & Batailly, A. (05 August 2022). Reduced Order Modeling of Cyclically Symmetric Bladed Disks with Geometric and Contact Nonlinearities [Paper presentation]. 15th World Congress on Computational Mechanics.

Ligot, J., Denis, S., Hoffait, S., De Cazenove, J., & Golinval, J.-C. (2022). DEVELOPMENT OF AN ACOUSTIC EXCITATION TEST BENCH TO SUPPORT THE VALIDATION OF BLADED DISKS. In Proceedings of ASME Turbo Expo 2022 - Volume 8B: Structures and Dynamics — Probabilistic Methods; Rotordynamics; Structural Mechanics and Vibration Structures and Dynamics - Probabilistic Methods; Rotordynamics; Structural Mechanics and Vibration. American Society of Mechanical Engineers (ASME). doi:10.1115/GT2022-81933

Delhez, E., Nyssen, F., Golinval, J.-C., & Batailly, A. (2022). Reduced Order Modeling of Bladed Disks with Geometric and Contact Nonlinearities [Paper presentation]. 8th International Conference on Advanced Computational Methods in Engineering.

Delhez, E., Nyssen, F., Golinval, J.-C., & Batailly, A. (2021). Assessment of Geometric Nonlinearities Influence On NASA Rotor 37 Response to Blade Tip/Casing Rubbing Events. Journal of Engineering for Gas Turbines and Power. doi:10.1115/1.4051968

Delhez, E., Nyssen, F., Golinval, J.-C., & Batailly, A. (2021). Assessment of geometric nonlinearities influence on NASA rotor 37 response to blade tip/casing rubbing events. In Proceedings of ASME Turbo Expo 2021. doi:10.1115/GT2021-58931

Delhez, E., Nyssen, F., Golinval, J.-C., & Batailly, A. (2021). Reduced order modeling of blades with geometric nonlinearities and contact interactions. Journal of Sound and Vibration. doi:10.1016/j.jsv.2021.116037

Delhez, E., Nyssen, F., Golinval, J.-C., & Batailly, A. (2020). Comparative Study of Blades Reduced Order Models with Geometrical Nonlinearities and Contact Interfaces. In Proceedings of ASME Turbo Expo 2020. doi:10.1115/GT2020-14882

Delhez, E., Nyssen, F., Batailly, A., & Golinval, J.-C. (June 2019). Comparative Study of Reduced Order Modeling Techniques Applied to Geometrically Nonlinear Structures [Poster presentation]. ASME Turbo Expo 2019, Phoenix, United States - Arizona.

Delhez, E., Vanvinckenroye, H., Denoël, V., & Golinval, J.-C. (2019). Experimental and numerical study of the second order moment of the first passage time of a steel strip subjected to forced and parametric excitations. In Proceedings of the International Modal Analysis Conference (IMAC) XXXVII. doi:10.1007/978-3-030-12243-0_7

Hoffait, S., Ligot, J., Bertha, M., Moschini S., Simon, D., & Golinval, J.-C. (2019). Poly-Reference Least-Square Complex Frequency Identification Revised to Improve Damping Estimation. In N. Maia, Proceeding of ICEDyn 2019. Lisboa, Portugal: Instituto Superior Técnico.

Delhez, E., Vanvinckenroye, H., Golinval, J.-C., & Denoël, V. (2018). Numerical and experimental study of first passage time of a steel strip subjected to forced and parametric excitations. In Proceedings of the 28th International Conference on Noise and Vibration Engineering.

Hoang Truong, V., Wu, L., Golinval, J.-C., Arnst, M., & Noels, L. (April 2018). Stochastic multiscale model of MEMS stiction accounting for high order statistical moments of non-Gaussian contacting surfaces. Journal of Microelectromechanical Systems, 27 (2), 137-155. doi:10.1109/JMEMS.2018.2797133

Pustan, M., Birleanu, C., Dudescu, C., & Golinval, J.-C. (2018). Dynamic behavior of smart microelectromechanical systems in industrial applications. In S. Nihtianov & A. Luque (Eds.), Smart Sensors and MEMS - Intelligent Sensing Devices and Microsystems for Industrial Applications (Second Edition, pp. 377-394). Elsevier - Woodhead Publishing. doi:10.1016/B978-0-08-102055-5.00014-0

Wu, L., Lucas, V., Golinval, J.-C., Paquay, S., & Noels, L. (07 November 2017). A stochastic 3-scale method to predict the thermo-elastic behaviors of polycrystalline structures [Paper presentation]. ECCOMAS Thematic Conference: Computational Modeling of Complex Materials across the Scales (CMCS 2017), Paris, France.

Golinval, J.-C. (2017). Damage Detection in Structures Based on Principal Component Analysis of Forced Harmonic Responses. In Procedia Engineering (pp. 1912-1918). Elsevier. doi:10.1016/j.proeng.2017.09.449

Lucas, V., Golinval, J.-C., Voicu, R., Danila, M., Gravila, R., Muller, R., Dinescu, A., Noels, L., & Wu, L. (06 July 2017). Propagation of material and surface profile uncertainties on MEMS micro-resonators using a stochastic second-order computational multi-scale approach. International Journal for Numerical Methods in Engineering, 111 (1), 26-68. doi:10.1002/nme.5452

Golinval, J.-C. (03 July 2017). On the Use of Principal Component Analysis for Parameter Identification and Damage Detection in Structures [Paper presentation]. International Conference on Structural Dynamics - ICEDyn 2017, Ericeira, Portugal.

Wu, L., Lucas, V., Golinval, J.-C., Paquay, S., & Noels, L. (05 June 2017). Stochastic multiscale method applied to thermo-elasticity of polycrystalline micro-structures [Paper presentation]. 2017 Engineering Mechanics Institute Conference (EMI 2017), San Diego, United States.

Hoang Truong, V., Wu, L., Paquay, S., Golinval, J.-C., Arnst, M., & Noels, L. (June 2017). A computational stochastic multiscale methodology for MEMS structures involving adhesive contact. Tribology International, 110, 401-425. doi:10.1016/j.triboint.2016.10.007

Bertha, M., & Golinval, J.-C. (01 May 2017). Identification of non-stationary dynamical systems using multivariate ARMA models. Mechanical Systems and Signal Processing, 88, 166-179. doi:10.1016/j.ymssp.2016.11.024

Hoang Truong, V., Wu, L., Paquay, S., Golinval, J.-C., Arnst, M., & Noels, L. (2017). A Stochastic Multi-scale Model For Predicting MEMS Stiction Failure. In L. V. Starman, J. Hay, ... N. Karanjgaokar (Eds.), Micro and Nanomechanics, Volume 5: Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics (Springer International Publishing, pp. 1-8). New York, United States: The Society for Experimental Mechanics, Inc. doi:10.1007/978-3-319-42228-2_1

Hoffait, S., Marin, F., Simon, D., & Golinval, J.-C. (2016). Virtual Shaker Testing : développement et utilisation en vue d’améliorer la stratégie de contrôle. In AVE2016 - 5ième Colloque Francophone "Analyse Vibratoire Expérimentale".

Wu, L., Lucas, V., Nguyen, V. D., Golinval, J.-C., Paquay, S., & Noels, L. (01 October 2016). A Stochastic Multi-Scale Approach for the Modeling of Thermo-Elastic Damping in Micro-Resonators. Computer Methods in Applied Mechanics and Engineering, 310, 802-839. doi:10.1016/j.cma.2016.07.042

Wu, L., Lucas, V., Golinval, J.-C., Paquay, S., & Noels, L. (07 September 2016). Probabilistic prediction of the quality factor of micro-resonator using a stochastic thermo-mechanical multi-scale approach [Paper presentation]. 15th edition of the European Mechanics of Materials Conference (EMMC15), Brussels, Belgium.

Hoffait, S., Marin, F., Simon, D., Peeters, B., & Golinval, J.-C. (2016). Virtual shaker testing at V2i: measured-based shaker model and industrial test case. In Conference proceedings of ISMA2016 - USD2016.

Wu, L., Lucas, V., Nguyen, V. D., Paquay, S., Golinval, J.-C., Noels, L., Voicu, R., Baracu, A., & Muller, R. (20 June 2016). A stochastic 3-Scale approach to study the thermomechanical damping of MEMS [Paper presentation]. Faculty of Science, Technology and Communication; Mathematics Research Unit Seminars, Luxembourg, Luxembourg.

Lucas, V., Wu, L., Golinval, J.-C., Paquay, S., Voicu, R., Baracu, A., & Noels, L. (09 June 2016). Multi-scale stochastic study of the grain orientation and roughness effects on polycrystalline thin structures [Paper presentation]. ECCOMAS Congress 2016 VII European Congress on Computational Methods in Applied Sciences and Engineering, Crete Island, Greece.

Hoang Truong, V., Paquay, S., Golinval, J.-C., Wu, L., Arnst, M., & Noels, L. (2016). A Stochastic Multi-scale Model For Predicting MEMS Stiction Failure. In Proceedings of the SEM XIII International Congress and Exposition on Experimental and Applied Mechanics. (SEMXIII 2016) (pp. 8).

Nyssen, F., & Golinval, J.-C. (2016). Influence of the inter‐stage coupling flexibility on the dynamics of multi‐stage rotors. In Proceedings of the ASME Turbo Expo 2016. doi:10.1115/GT2016-57212

Wu, L., Lucas, V., Nguyen, V. D., Paquay, S., Golinval, J.-C., Noels, L., Voicu, R., Baracu, A., & Muller, R. (23 May 2016). Probabilistic prediction of the quality factor of micro-resonator using a stochastic thermo-mechanical multi-scale approach [Paper presentation]. SMMEG Seminar Series (engs solid mechanics seminars), Oxford, United Kingdom.

Hoffait, S., Marin, F., Simon, D., Peeters, B., & Golinval, J.-C. (03 May 2016). Measured-based shaker model to virtually simulate vibration sine test. Case Studies in Mechanical Systems and Signal Processing, 4, 1-7. doi:10.1016/j.csmssp.2016.04.001

Hoang Truong, V., Wu, L., Paquay, S., Golinval, J.-C., Arnst, M., & Noels, L. (2016). A Study Of Dry Stiction Phenomenon In MEMS Using A Computational Stochastic Multi-scale Methodology. In EuroSimE 2016 in Montpellier (pp. 4). IEEE. doi:10.1109/EuroSimE.2016.7463333

Elkarous, L., Robbe, C., Pirlot, M., & Golinval, J.-C. (2016). Dynamic calibration of piezoelectric transducers for ballistic high-pressure measurement. International Journal of Metrology and Quality Engineering. doi:10.1051/ijmqe/2016004

Bertha, M., & Golinval, J.-C. (2016). Time-Varying Modal Parameters Identification in the Modal Domain. In Proceedings of ISMA 2016 - International Conference on Noise and Vibration Engineering.

Bertha, M., & Golinval, J.-C. (2016). Multivariate ARMA Based Modal Identification of a Time-varying Beam. In Proceedings of the International Modal Analysis Conference (IMAC) XXXIV. doi:10.1007/978-3-319-30249-2_24

Nyssen, F., Epureanu, B., & Golinval, J.-C. (2016). Experimental modal identification of mistuning in an academic two-stage drum. Mechanical Systems and Signal Processing. doi:10.1016/j.ymssp.2016.10.030

Hoang Truong, V., Wu, L., Paquay, S., Obreja, A. C., Voicu, R., Müller, R., Golinval, J.-C., & Noels, L. (December 2015). A probabilistic model for predicting the uncertainties of the humid stiction phenomenon on hard materials. Journal of Computational and Applied Mathematics, 289, 173 - 195. doi:10.1016/j.cam.2015.02.022

Lucas, V., Golinval, J.-C., Paquay, S., Nguyen, V. D., Noels, L., & Wu, L. (01 September 2015). A stochastic computational multiscale approach; Application to MEMS resonators. Computer Methods in Applied Mechanics and Engineering, 294, 141–167. doi:10.1016/j.cma.2015.05.019

Lucas, V., Wu, L., Paquay, S., Golinval, J.-C., & Noels, L. (09 July 2015). A probabilistic multi-scale model for polycrystalline MEMS resonators [Paper presentation]. 9th European Solid Mechanics Conference, ESMC15, Madrid, Spain.

Nyssen, F., Arnst, M., & Golinval, J.-C. (2015). Experimental Modal Identification of Mistuning in an Academic Blisk and Comparison With The Blades Geometry Variations. Proceedings of the ASME Turbo Expo. doi:10.1115/GT2015-43436

Hoang Truong, V., Wu, L., Golinval, J.-C., Paquay, S., & Noels, L. (26 May 2015). A stochastic multiscale analysis for MEMS stiction failure [Paper presentation]. 1st International Conference on Uncertainty Quantification in Computational Sciences and Engineering (UNCECOMP 2015), Crete Island, Greece.

Lucas, V., Wu, L., Golinval, J.-C., Paquay, S., & Noels, L. (26 May 2015). Propagation of uncertainties in the modelling of MEMS resonators (using a 3-scale probabilistic approach) [Paper presentation]. 1st International Conference on Uncertainty Quantification in Computational Sciences and Engineering (UNCECOMP 2015), Crete Island, Greece.

Lucas, V., Wu, L., Paquay, S., Golinval, J.-C., Mulay, S., & Noels, L. (25 February 2015). Propagation of uncertainties using probabilistic multi-scale models [Paper presentation]. Euromech 559 Multi-scale computational methods for bridging scales in materials and structures, Eindhoven, Netherlands.

Nyssen, F., & Golinval, J.-C. (2015). Identification of Mistuning and Model Updating of an Academic Blisk Based on Geometry and Vibration Measurements. Mechanical Systems and Signal Processing. doi:10.1016/j.ymssp.2015.08.006

Golinval, J.-C. (20 November 2014). On the Use of Principal Component Analysis for Parameter Identification and Damage Detection in Structures [Paper presentation]. 4ème Colloque "Analyse Vibratoire Expérimentale", Blois, France.

Lucas, V., Wu, L., Arnst, M., Golinval, J.-C., Paquay, S., & Noels, L. (27 August 2014). Prediction of meso-scale mechanical properties of poly-silicon materials [Paper presentation]. EMMC14 - European Mechanics of Materials Conference 2014, Gothenburg, Sweden.

Nyssen, F., Arnst, M., & Golinval, J.-C. (2014). Modeling of Uncertainties in Bladed Disks Using a Nonparametric Approach. Proceedings of the ASME IDETC/CIE 2014. doi:10.1115/DETC2014-35025

Bertha, M., & Golinval, J.-C. (July 2014). Experimental modal analysis of a beam travelled by a moving mass using Hilbert Vibration Decomposition [Paper presentation]. 9th International Conference on Structural Dynamics, EURODYN 2014, Porto, Portugal.

Nyssen, F., Arnst, M., & Golinval, J.-C. (July 2014). Nonparametric modelling of multi-stage assemblies of mistuned bladed disks [Paper presentation]. 5th European Conference on Computational Mechanics, Barcelona, Spain.

Hoang Truong, V., Wu, L., Arnst, M., Golinval, J.-C., Muller, R., Voicu, R., & Noels, L. (26 June 2014). A probabilistic model of the adhesive contact forces between rough surfaces in the MEMS stiction context [Paper presentation]. 6th International Conference on Advanced Computational Methods in Engineering, ACOMEN 2014, Ghent, Belgium.

Beckers, R., Nyssen, F., Benabou, H., Viguié, R., Ligot, J., Simon, D., & Golinval, J.-C. (June 2014). Calibration of Gauges for Dynamic Strain Measurements on Compressor Bladed Disks [Poster presentation]. ASME Turbo Expo 2014, Düsseldorf, Germany.

Lucas, V., Wu, L., Arnst, M., Golinval, J.-C., Paquay, S., Nguyen, V. D., & Noels, L. (2014). Prediction of macroscopic mechanical properties of a polycrystalline microbeam subjected to material uncertainties. In Á. Cunha, E. Caetano, P. Ribeiro, ... G. Muller (Eds.), Proceedings of the 9th International Conference on Structural Dynamics, EURODYN 2014 (pp. 2691-2698).

Nyssen, F., Arnst, M., & Golinval, J.-C. (June 2014). Towards a Nonparametric Modelling of Multi-stage Assemblies of Mistuned Bladed Disks [Poster presentation]. ASME Turbo Expo 2014, Düsseldorf, Germany.

Bertha, M., & Golinval, J.-C. (2014). Identification of a Time-varying Beam Using Hilbert Vibration Decomposition. In Proceedings of the International Modal Analysis Conference (IMAC) XXXII.

Nguyen, V. H., Mahowald, J., Maas, S., & Golinval, J.-C. (2014). Damage Detection in Civil Engineering Structure Considering Temperature Effect. In Proceedings of IMAC XXXII Dynamics of Coupled Structures. doi:10.1007/978-3-319-04546-7_22

Bertha, M., & Golinval, J.-C. (2014). Modal identification of time-varying systems using Hilbert transform and signal decomposition [Paper presentation]. ISMA 2014 conference.

Nguyen, V. H., Mahowald, J., Maas, S., & Golinval, J.-C. (2014). Use of Time- and Frequency-Domain Approaches for Damage Detection in Civil Engineering Structures. Shock and Vibration, 2014. doi:10.1155/2014/872492

Lucas, V., Wu, L., Arnst, M., Golinval, J.-C., Paquay, S., & Noels, L. (December 2013). Probabilistic model for MEMS micro-beam resonance frequency made of polycrystalline linear anisotropic material [Paper presentation]. 5th Asia Pacific Congress on Computational Mechanics & 4th International Synposium on Computational Mechanics APCOM & ISCM 2013, Singapore, Singapore.

Elkarous, L., Coghe, F., Pirlot, M., & Golinval, J.-C. (10 September 2013). Experimental techniques for ballistic pressure measurements and recent development in means of calibration. Journal of Physics. Conference Series, 459. doi:10.1088/1742-6596/459/1/012048

Nyssen, F., Viguié, R., Simon, D., & Golinval, J.-C. (2013). A Methodology for The Appropriation And The Isolation of Nodal Diameter Modes in Cyclic Symmetric Structures. Proceedings of ASME 2013 International Design Engineering Technical Conference & Computers and Information in Engineering Conference IDETC/CIE 2013. doi:10.1115/DETC2013-12919

Demy, P., Golinval, J.-C., & Simon, D. (19 June 2013). Damage detection in composites by vibrothermography and local resonances. Mechanics and Industry, 14 (2), 137-143. doi:10.1051/meca/2012038

Nyssen, F., Golinval, J.-C., Viguié, R., & Simon, D. (2013). Excitation of nodal diameter mode-shapes of a stator ring of a turbojet engine using a limited number of excitation sources. Proceedings of ASME Turbo Expo 2013. doi:10.1115/GT2013-94779

Nguyen, V. H., Mahowald, J., Golinval, J.-C., & Maas, S. (2013). Detection and Localisation of Damage on Industrially Produced Concrete Slabs Through Time- and Frequency-Domain Approaches. In E. Carrera, F. Miglioretti, ... M. Petrolo (Eds.), 6th ECCOMAS Thematic Conference on Smart Structures and Materials (SMART2013).

Nguyen, V. H., Mahowald, J., Maas, S., & Golinval, J.-C. (2013). Use of Time- and Frequency-Domain Approaches for Damage Detection in Civil Engineering Structures. In N. Maia, N. Neves, ... R. Sampaio (Eds.), International Conference on Structural Engineering Dynamics : ICEDyn 2013, Sesimbra 17-19 June 2013. IST/IDMEC.

Wu, L., Noels, L., & Golinval, J.-C. (2013). ON THE MODELING OF ADHESIVE CONTACT AND STICTION FAILURE IN MICRO-SWITCHES. In Ouisse (FEMTO-ST – ENSMM, France) & J. F. Deü (CNAM, FR) (Eds.), MEDYNA 2013 Proceedings (Creative Commons Attribution-NoDerivs 3.0 Generic (CC BY-ND 3.0) License, pp. 377-380).

Kerschen, G., Peeters, M., Golinval, J.-C., & Stephan, C. (2013). Nonlinear modal analysis of a full-scale aircraft. Journal of Aircraft, 50, 1409-1419. doi:10.2514/1.C031918

Wu, L., Golinval, J.-C., & Noels, L. (2013). Stiction Failure in Microswitches Due to Elasto-Plastic Adhesive Contacts. In G. Shaw, B. Prorok, ... L. Starman (Eds.), MEMS and Nanotechnology, Volume 6 (pp. 67-74). Springer. doi:10.1007/978-1-4614-4436-7_11

Wu, L., Golinval, J.-C., & Noels, L. (January 2013). A Micro Model for Elasto-Plastic Adhesive-Contact in Micro-Switches: Application to cyclic loading. Tribology International, 57, 137-146. doi:10.1016/j.triboint.2012.08.003

Wu, L., Golinval, J.-C., & Noels, L. (24 November 2012). Stiction failure in microswitches due to elasto-plastic adhesive contact and cyclic loading [Paper presentation]. Nanomechanics and nanotribology for reliability design of micro- and nanosystems - international exploratory workshop, Cluj Napoca, Romania.

Bertha, M., & Golinval, J.-C. (November 2012). Identification modale de systèmes variant dans le temps à partir de réponses simulées sur un exemple d'éoliennes [Poster presentation]. 3ième Colloque "Analyse Vibratoire Expérimentale", Blois, France.

Demy, P., Golinval, J.-C., & Simon, D. (2012). Détection d'endommagement et résonances locales sur composite CFRP par vibrothermographie. In R. Serra (Ed.), 3ième Colloque "Analyse Vibratoire Expérimentale". Blois, France: ENIVL.

Marin, F., Simon, D., & Golinval, J.-C. (2012). Qualification d’un appareil d'éclairage décoratif soumis aux vibrations induites par un pont ferroviaire. In R. Serra (Ed.), 3ième Colloque "Analyse Vibratoire Expérimentale". Blois, France: ENIVL.

Nyssen, F., Golinval, J.-C., Simon, D., & Viguié, R. (2012). Méthodologie d’excitation de modes à diamètres nodaux d’un anneau statorique de turboréacteur. In R. Serra (Ed.), 3ième Colloque "Analyse Vibratoire Expérimentale". Blois, France: ENIVL.

Kerschen, G., Noël, J.-P., Renson, L., & Golinval, J.-C. (October 2012). Nonlinear Dynamic Analysis of Aerospace Structures [Paper presentation]. LMS European Aerospace Conference 2012, Toulouse, France.

Bertha, M., Mayorga Rios, J. P., & Golinval, J.-C. (2012). Modal identification of time-varying systems using simulated responses on wind turbines. In P. Sas, D. Moens, ... S. Jonckheere (Eds.), Proceedings of ISMA2012-USD2012 (pp. 4285-4296). Leuven, Belgium: KU Leuven.

Demy, P., Golinval, J.-C., & Simon, D. (September 2012). Damage detection and local resonances model in CFRP composite material by vibrothermography [Paper presentation]. ISMA2012 - International Conference on Noise and Vibration Engineering, Leuven, Belgium.

Elkarous, L., Pirlot, M., & Golinval, J.-C. (2012). Étalonnage dynamique des capteurs piézoélectriques pour la mesure de haute pression balistique. In 4ème Conférence Internationale de métrologie - CAFMET2012.

Nguyen, V. H., Rutten, C., & Golinval, J.-C. (2012). Fault Diagnosis in Industrial Systems Based on Blind Source Separation Techniques Using One Single Vibration Sensor. Shock and Vibration, 19 (5), 795-801. doi:10.3233/SAV-2012-0688

Nguyen, V. H., Rutten, C., Golinval, J.-C., Mahowald, J., Maas, S., & Waldmann, D. (2012). Damage Detection on the Champangshiehl Bridge using Blind Source Separation. In A. Strauss, D. M. Frangopol, ... K. Bergmeister (Eds.), Life-Cycle and Sustainability of Civil Infrastructure Systems. London, United Kingdom: Taylor & Francis Group.

Pustan, M., Muller, R., & Golinval, J.-C. (2012). Nanomechanical and nanotribological characterization of microelectromechanical system. Journal of Optoelectronics and Advanced Materials, 14 (3-4), 401-412.

Pustan, M., Rochus, V., & Golinval, J.-C. (2012). Mechanical and tribological characterization of a thermally actuated MEMS cantilever. Microsystem Technologies. doi:10.1007/s00542-011-1423-7

Wu, L., Golinval, J.-C., & Noels, L. (2012). Stiction failure in microswitches due to elasto-plastic adhesive contact. In Proceedings of the XII SEM International Conference & Exposition on Experimental and Applied Mechanics (pp. 9).

Demy, P., Golinval, J.-C., & Simon, D. (2011). Détection d'endommagement de structures en matériaux composites CFRP par vibrothermographie. In J.-M. Desse, P. Picart, ... P. Tankam (Eds.), Actes du 12ème colloque international francophone sur les méthodes et techniques optiques pour l'industrie. France: Les éditions de la Société Française d'Optique.

Wu, L., Golinval, J.-C., & Noels, L. (2011). Influence of the elasto-plastic adhesive contact on Micro-Switches. In M. Hogge, R. Van Keer, E. Dick, B. Malengier, M. Slodicka, C. Geuzaine, L. Noels, J.-F. Remacle, ... E. Béchet (Eds.), Proceedings of the 5th International Conference on Advanded COmputational Methods in Engineering (ACOMEN2011) (pp. 8).

Wu, L., Noels, L., Rochus, V., Pustan, M., & Golinval, J.-C. (01 August 2011). A Micro-Macroapproach to Predict Stiction due to Surface Contact in Microelectromechanical Systems. Journal of Microelectromechanical Systems, 20 (4), 976 - 990. doi:10.1109/JMEMS.2011.2153823

Pustan, M., Paquay, S., Rochus, V., & Golinval, J.-C. (25 April 2011). Modeling and finite element analysis of mechanical behavior of flexible MEMS components. Microsystem Technologies, 17 (4), 553-562. doi:10.1007/s00542-011-1232-z

Pustan, M., Paquay, S., Rochus, V., & Golinval, J.-C. (2011). Effects of the electrode positions on the dynamical behaviour of electrostatically actuated MEMS resonators [Paper presentation]. 12th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems - EuroSimE, Linz, Austria. doi:10.1109/ESIME.2011.5765767

Elkarous, L., Pirlot, M., Golinval, J.-C., & Maldague, M. (2011). Investigation on gas pressure measurement inside small caliber weapons with piezoelectric transducers. In Measurement Science Conference 2012.

Golinval, J.-C. (06 January 2011). Diagnostic de l’état mécanique de structures par analyse de vibrations [Paper presentation]. Les Jeudis des Sciences, Luxembourg, Luxembourg.

Nguyen, V. H., & Golinval, J.-C. (2011). Damage Detection Using Blind Source Separation Techniques. In IMAC-XXIX: Conference & Exposition on Structural Dynamics - Advanced Aerospace Applications. Springer.

Nguyen, V. H., Rutten, C., & Golinval, J.-C. (2011). Fault Diagnosis in Industrial Systems Based on Blind Source Separation Techniques Using One Single Vibration Sensor. In N. M. Maia NNM (Ed.), International Conference on Structural Engineering Dynamics (ICEDyn 2011) - Proceedings.

Peeters, M., Kerschen, G., & Golinval, J.-C. (2011). Phase resonance testing of nonlinear vibrating structures. In 28th International Modal Analysis Conference, Jacksonville, 2010.

Peeters, M., Kerschen, G., & Golinval, J.-C. (2011). Modal testing of nonlinear vibrating structures based on nonlinear normal modes: Experimental demonstration. Mechanical Systems and Signal Processing, 25, 1227-1247. doi:10.1016/j.ymssp.2010.11.006

Peeters, M., Kerschen, G., & Golinval, J.-C. (2011). Dynamic testing of nonlinear vibrating structures using nonlinear normal modes. Journal of Sound and Vibration, 330. doi:10.1016/j.jsv.2010.08.028

Peeters, M., Kerschen, G., Golinval, J.-C., & Stephan, C. (2011). Nonlinear normal modes of real-world structures: application to a full-scale aircraft. In Proceedings of the ASME International Design Engineering Technical Conferences. doi:10.1115/DETC2011-47141

Peeters, M., Kerschen, G., Golinval, J.-C., Stéphan, C., & Lubrina, P. (2011). Nonlinear Normal Modes of a Full-Scale Aircraft. In 29th International Modal Analysis Conference, Jacksonville, 2011.

Peeters, M., Kerschen, G., Golinval, J.-C., Stephan, C., & Lubrina, P. (2011). Nonlinear modal analysis of aerospace structures. In Proceedings of the 3rd International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering.

Peeters, M., Renson, L., Kerschen, G., Golinval, J.-C., Stéphan, C., & Lubrina, P. (2011). Computation of nonlinear normal modes of large structures: application to a full-scale aircraft. In Proceedings of the 7th European Nonlinear Dynamics Conference (ENOC 2011).

Pustan, M., Belcin, O., & Golinval, J.-C. (2011). Dynamic investigations of paddle MEMS cantilevers used in mass sensing applications. In M. Arghir (Ed.), Acta Technica Napocensis of The Technical University of Cluj-Napoca (pp. 117-122).

Rutten, C., Nguyen, V. H., & Golinval, J.-C. (2011). Industrial applications of extended output-only Blind Source Separation techniques. Vibration Problems Icovp 2011: The 10th International Conference on Vibration Problems.

Rutten, C., Nguyen, V. H., & Golinval, J.-C. (2011). Comparison of output-only methods for condition monitoring of industrials systems. Journal of Physics. Conference Series, 305. doi:10.1088/1742-6596/305/1/012101

Wu, L., Noels, L., Rochus, V., Pustan, M., & Golinval, J.-C. (2011). Design of Microswitch Systems Avoiding Stiction due to Surface Contact. In T. Proulx (Ed.), MEMS and Nanotechnology, Volume 2 (pp. 189-195). New York, United States - New York: Springer. doi:10.1007/978-1-4419-8825-6_27

Pustan, M., Rochus, V., & Golinval, J.-C. (December 2010). NANOTRIBOLOGICAL AND NANOMECHANICAL CHARACTERIZATIONS OF MEMS MATERIALS [Poster presentation]. NanoWal - The Wallonia Network for Nanotechnologies ASBL, Louvain-la-Neuve, Belgium.

Nguyen, V. H., & Golinval, J.-C. (September 2010). Fault detection based on Kernel Principal Component Analysis. Engineering Structures, 32, 3683-3691. doi:10.1016/j.engstruct.2010.08.012

Nguyen, V. H., Rutten, C., & Golinval, J.-C. (2010). Fault detection in mechanical systems based on subspace features. International Conference on Noise and Vibration Engineering.

Nguyen, V. H., & Golinval, J.-C. (August 2010). Localization and quantification of damage in beam-like structures using sensitivities of principal component analysis results. Mechanical Systems and Signal Processing, 24 (6), 1831-1843. doi:10.1016/j.ymssp.2010.01.012

Nguyen, V. H., Peeters, M., & Golinval, J.-C. (July 2010). Detection of nonlinearity in a dynamic system using deformation modes obtained from the wavelet transform of measured responses. Shock and Vibration, 17 (4-5), 491-506. doi:10.3233/SAV-2010-0543

Pustan, M., Golinval, J.-C., & Rochus, V. (2010). Geometrical Effects on the Dynamical Behavior of MEMS structures [Paper presentation]. European Conference on Computational Mechanics (ECCM 2010), Paris, France.

Pustan, M., Paquay, S., Rochus, V., & Golinval, J.-C. (2010). Modeling and Finite Element Analysis of Mechanical Behavior of Flexible MEMS Components. In B. Courtois (Ed.), DTIP 2010 (2010, pp. 171-176). Grenoble, France: EDA Publishing.

Nguyen, V. H., & Golinval, J.-C. (2010). Damage localization in Linear-Form Structures Based on Sensitivity Investigation for Principal Component Analysis. Journal of Sound and Vibration, 329, 4550-4566. doi:10.1016/j.jsv.2010.04.032

Nguyen, V. H., & Golinval, J.-C. (2010). Damage Diagnosis of Beam-like Structures Based on Sensitivities of Principal Component Analysis Results. In IMAC-XXVIII A Conference on Structural Dynamics. Stoughton, United States - Wisconsin: The Printing House, Inc.

Nguyen, V. H., Rutten, C., & Golinval, J.-C. (2010). Subspace-based Methods for Machinery Analysis and Monitoring [Paper presentation]. XVIIth Symposium Vibrations, Chocs & Bruits, Lyon, France.

Peeters, M., Golinval, J.-C., & Kerschen, G. (2010). Theoretical and experimental modal analysis of nonlinear aerospace structures. In Proceedings of the AIAA Modeling and Simulation Technologies Conference.

Peeters, M., Golinval, J.-C., & Kerschen, G. (2010). Nonlinear Normal Modes: Theoretical Curiosity or Practical Concept ?, KEYNOTE LECTURE. In IMPACT 2010, Djerba, 2010.

Peeters, M., Kerschen, G., & Golinval, J.-C. (2010). Modal testing using nonlinear normal modes: experimental demonstration. In Proceedings of the International Conference on Noise and Vibration Engineering.

Peeters, M., Kerschen, G., & Golinval, J.-C. (2010). Experimental modal analysis of nonlinear vibrating structures using nonlinear normal modes. In IV European Conference on Computational Mechanics, Paris, 2010.

Pustan, M., Golinval, J.-C., & Rochus, V. (2010). Effects of the geometrical dimensions on stress and strain of electrostatically actuated MEMS resonators at pull-in and stiction positions. In EuroSimE 2010. doi:10.1109/ESIME.2010.5464576

Pustan, M., Rochus, V., Wu, L., Noels, L., & Golinval, J.-C. (2010). Evaluation of Tribo-Mechanical Properties of Thin Films Using Atomic Force Microscope. In First European Conference on Nanofilm ECNF2010 (pp. 7).

Rochus, V., Hannot, S., Golinval, J.-C., & Rixen. (2010). Simulation of Particle Levitation due to Dielectrophoresis. In EuroSimE 2010. doi:10.1109/ESIME.2010.5464526

Wu, L., Noels, L., Rochus, V., Pustan, M., & Golinval, J.-C. (2010). Design of Microswitch Systems Avoiding Stiction due to Surface Contact. In SEM 2010 Annual Conference & Exposition on Experimental and Applied Mechanics (Society for Experimental Mechanics, Inc, pp. 7).

Wu, L., Rochus, V., Noels, L., & Golinval, J.-C. (2010). Prediction of Stiction in Microswitch Systems. In EUROSIME 2010 (pp. 4). doi:10.1109/ESIME.2010.5464599

Wu, L., Rochus, V., Noels, L., & Golinval, J.-C. (01 December 2009). Influence of Adhesive Rough Surface Contact on Micro-Switches. Journal of Applied Physics, 106 (11), 113502. doi:10.1063/1.3260248

Marin, F., Marville, C., & Golinval, J.-C. (2009). Qualification Procedure of Luminaires in the Event of an Impact to the Pole [Paper presentation]. Second EUREKA International Symposium on Environmental Testing Engineering, Brussels, Belgium.

Rutten, C., Loffet, C., & Golinval, J.-C. (2009). Damage Detection of Mechanical Components Using Null Subspace Analysis [Paper presentation]. Second EUREKA International Symposium on Environmental Testing Engineering, Brussels, Belgium.

Poncelet, F., Bernay, B., Kerschen, G., & Golinval, J.-C. (2009). Damping material characterization and modeling: an industrial case-study. In International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2009), San Diego, 2009. doi:10.1115/DETC2009-87342

Georgiades, F., Peeters, M., Kerschen, G., Golinval, J.-C., & Ruzzene, M. (2009). Modal Analysis of a Nonlinear Periodic Structure with Cyclic Symmetry. AIAA Journal, 47, 1014-1025. doi:10.2514/1.40461

Golinval, J.-C. (2009). Parameter estimation and structural model updating using modal methods in the presence of nonlinearity [Paper presentation]. SICON Final Conference, Rome, Italy.

Gutschmidt, S., Rochus, V., & Golinval, J.-C. (2009). Static and Dynamic experimental investigations of a micro-electromechanical cantilever in air and vacuum [Paper presentation]. Proceedings of Thermal, Mechanical and Multiphysics Simulation and Experiments in Micro-Electronics and Micro-systems EuroSime, Delft, Netherlands. doi:10.1109/ESIME.2009.4938475

Kerschen, G., & Golinval, J.-C. (2009). Dimensionality Reducion using Linear and Nonlinear Transformations. In C. Boller, Encyclopedia of Structural Health Monitoring. Chichester, United Kingdom: Wiley.

Kerschen, G., Peeters, M., Golinval, J.-C., & Vakakis, A. F. (2009). Nonlinear normal modes, Part 1: Useful framework for the structural dynamicist. Mechanical Systems and Signal Processing, 23, 170-194. doi:10.1016/j.ymssp.2008.04.002

Nguyen, V. H., Peeters, M., & Golinval, J.-C. (2009). Detection of nonlinearity in a dynamic system using deformation modes obtained from the Wavelet Transfrom of measured responses [Paper presentation]. Internaional Conference on Structural Engineering Dynamics (ICEDyn 2009), Ericeira, Portugal.

Peeters, M., Kerschen, G., & Golinval, J.-C. (2009). On modal interactions in strongly nonlinear systems. In Euromech 503, Nonlinear Normal Modes, Dimension Reduction and Localization in Vibrating Systems, Frascati, 2009.

Peeters, M., Kerschen, G., & Golinval, J.-C. (2009). Modal testing of nonlinear vibrating structures based on a nonlinear extension of force appropriation. In ASME International Design Engineering Technical Conferences, San Diego, 2009. doi:10.1115/DETC2009-87321

Peeters, M., Viguié, R., Kerschen, G., & Golinval, J.-C. (2009). Modal analysis of a nonlinear structure with cyclic symmetry. In 27th International Modal Analysis Conference, Orlando, 2009.

Peeters, M., Viguié, R., Sérandour, G., Kerschen, G., & Golinval, J.-C. (2009). Nonlinear normal modes, Part 2: Toward a pratical computation using numerical continuation techniques. Mechanical Systems and Signal Processing, 23, 195-216. doi:10.1016/j.ymssp.2008.04.003

Pustan, M., Golinval, J.-C., & Rochus, V. (2009). Nanomechanical properties of sensing microcomponents [Paper presentation]. MicroNano Conference´09, Delft, Netherlands.

Rochus, V., Golinval, J.-C., & Geuzaine, C. (2009). Dual Approach for Electromechanical Coupling in MEMS [Paper presentation]. ASME Design Engineering Technical Conference & Computers and Information in Engineering Conference, San Diego, United States - California. doi:10.1115/DETC2009-87791

Rochus, V., Golinval, J.-C., Van Miegroet, L., & Duysinx, P. (2009). Electrostatic Forces Computed with Extended Finite Element [Paper presentation]. International Conference on Extended Finite Element Methods – Recent Developments and Applications XFEM 2009, Aachen, Germany.

Rochus, V., Gutschmidt, S., Golinval, J.-C., Saint-Mard, M., Heusdens, B., Haudry, F., & Destiné, J. (2009). High Vibration Sensors: Modelling, Design and Integration. In Proceedings of Thermal, Mechanical and Multiphysics Simulation and Experiments in Micro-Electronics and Micro-systems EuroSime. doi:10.1109/ESIME.2009.4938479

Saint-Mard, M., Heusdens, B., Haudry, F., Rochus, V., Gutschmidt, S., Destiné, J., & Golinval, J.-C. (2009). Smart Sensors and MEMS for all over Industrial Application Niches. In Smart Systems Integration.

Viguié, R., Kerschen, G., Golinval, J.-C., Bergman, L. A., & Vakakis, A. F. (2009). Using passive nonlinear targeted energy transfer to stabilize drill-stringsystems. In International Colloquium on Non-Linear Dynamics of Deep Drill-String Systems, Liège, 2009.

Viguié, R., Kerschen, G., Golinval, J.-C., McFarland, D. M., Bergman, L. A., Vakakis, A. F., & van de Wouw, N. (2009). Using passive nonlinear targeted energy transfer to stabilize drill-stringsystems. Mechanical Systems and Signal Processing, 23, 149-169. doi:10.1016/j.ymssp.2007.07.001

Viguié, R., Peeters, M., Kerschen, G., & Golinval, J.-C. (2009). Energy Transfer and Dissipation in a Duffing Oscillator Coupled to a Nonlinear Attachment. Journal of Computational and Nonlinear Dynamics, 4 (4). doi:10.1115/1.3192130

Wu, L., Rochus, V., Noels, L., & Golinval, J.-C. (2009). Influence of Adhesive Rough Surface Contact on Micro-Switches [Paper presentation]. MUT 09, Besançon, France.

Georgiades, F., Peeters, M., Kerschen, G., Golinval, J.-C., & Ruzzenne, M. (2008). Nonlinear modal analysis and energy localization in a bladed disk assembly. In ASME Turbo Expo 2008: Power for Land, Sea and Air, Berlin, 2008. doi:10.1115/GT2008-51388

Bruls, O., & Golinval, J.-C. (2008). On the numerical damping of time integrators for coupled mechatronic systems. Computer Methods in Applied Mechanics and Engineering, 197 (6-8), 577-588. doi:10.1016/j.cma.2007.08.007

Durieu, F., Bruls, O., Rochus, V., Golinval, J.-C., & Serandour, G. (2008). Reduced-order modeling of electrostatically-actuated micro-beams. In Proceedings of the 6th EUROMECH Nonlinear Dynamics Conference (ENOC) (pp. 1-6).

Kerschen, G., Peeters, M., Golinval, J.-C., & Vakakis, A. F. (2008). Nonlinear Normal Modes, Part I: An Attempt To Demystify Them. In 26th International Modal Analysis Conference, Orlando, 2008.

Lemaire, E., Rochus, V., Golinval, J.-C., & Duysinx, P. (2008). Microbeam pull-in voltage topology optimization including material deposition constraint. Computer Methods in Applied Mechanics and Engineering, 197, 4040-4050. doi:10.1016/j.cma.2008.03.024

Lemaire, E., Rochus, V., Golinval, J.-C., & Duysinx, P. (2008). Electromechanical microdevice pull-in voltage maximization using topology optimization [Paper presentation]. 8th World Congress on Computational Mechanics, Venice, Italy.

Peeters, M., Viguié, R., Sérandour, G., Kerschen, G., & Golinval, J.-C. (2008). Nonlinear Normal Modes, Part II: Practical Computation using Numerical Continuation Techniques. In 26th International Modal Analysis Conference, Orlando, 2008.

Peeters, M., Viguié, R., Serandour, G., Kerschen, G., & Golinval, J.-C. (2008). Computation of Nonlinear Normal Modes using Numerical Continuation Techniques. In International Confernce on Advanced Computational Methods in Engineering, Liège, 2008.

Peeters, M., Viguié, R., Serandour, G., Kerschen, G., & Golinval, J.-C. (2008). COMPUTATION OF NONLINEAR NORMAL MODES, PART I: NUMERICAL CONTINUATION IN MATLAB. In Sixth EUROMECH Nonlinear Dynamics Conference, Saint Petersbourg, 2008.

Poncelet, F., Kerschen, G., & Golinval, J.-C. (2008). Operational Modal Analysis using Second-Order Blind Identification. In 26th International Modal Analysis Conference, Orlando, 2008.

Poncelet, F., Kerschen, G., & Golinval, J.-C. (2008). In-orbit vibration testing of spacecraft structures. In International Conference on Noise and Vibration Engineering, Leuven, 2008.

Rochus, V., Rixen, D., & Golinval, J.-C. (2008). MEMS Modelling using Non-Conforming Elements [Paper presentation]. Eccomas, Venezia, Italy.

Rochus, V., Van Miegroet, L., Duysinx, P., Golinval, J.-C., & Rixen, D. (2008). Modelling the electromechanical coupling of RF switch using Extended Finite Element [Paper presentation]. EuroSimE Conference :Thermal, Mechanical and Multiphysics Simulation and Experiments in Micro-Electronics and Micro-Systems, Freiburg im Breisgau, Germany. doi:10.1109/ESIME.2008.4525039

Serandour, G., Peeters, M., Kerschen, G., & Golinval, J.-C. (2008). Computation of nonlinear normal modes, part II: numerical continuation in Auto. In Sixth EUROMECH Nonlinear Dynamics Conference, Saint Petersbourg, 2008.

Viguié, R., Peeters, M., Kerschen, G., & Golinval, J.-C. (2008). Vibration Mitigation of Nonlinear Vibrating Structures using Nonlinear Energy Sinks. In 26th International Modal Analysis Conference, Orlando, 2008.

Rochus, V., Golinval, J.-C., Mendez, C., Klapka, I., & Louis, C. (December 2007). Model of electrostatic actuated deformable mirror using strongly coupled electro-mechanical finite element. Analog Integrated Circuits and Signal Processing, 53 (2-3), 129-135. doi:10.1007/s10470-007-9066-4

Georgiades, F., Peeters, M., Kerschen, G., Golinval, J.-C., & Ruzzenne, M. (2007). LOCALIZATION OF ENERGY IN A PERFECTLY SYMMETRIC BLADED DISK ASSEMBLY DUE TO NONLINEARITIES. In ASME Internaional Mechanical Engineering Congress and Exposition, Seattle, 2007. doi:10.1115/IMECE200741649

Rochus, V., Rixen, D. J., & Golinval, J.-C. (July 2007). Non-conforming element for accurate modelling of MEMS. Finite Elements in Analysis and Design, 43 (10), 749-756. doi:10.1016/j.finel.2007.03.006

Lemaire, E., Rochus, V., Fleury, C., Golinval, J.-C., & Duysinx, P. (May 2007). Topology optimization of microbeams including layer deposition manufacturing constraints [Paper presentation]. 7th World Congress on Structural and Multidisciplinary Optimization, Seoul, South Korea.

Bolland, M., COLLIGNON, G., VANDENPLAS, X., Vueghs, P., Vandenrijt, J.-F., Kerschen, G., Bruls, O., Noels, L., Golinval, J.-C., Beckers, P., Rochus, P., & GRANVILLE, D. (2007). PARTICIPATION OF ULG STUDENTS TO THE SSETI MICROSATELLITE PROGRAMME USING SAMCEF [Paper presentation]. 10th SAMTECH Users Conference, Liège, Belgium.

Bruls, O., Duysinx, P., & Golinval, J.-C. (2007). The global modal parameterization for non-linear model-order reduction in flexible multibody dynamics. International Journal for Numerical Methods in Engineering, 69 (5), 948-977. doi:10.1002/nme.1795

Kerschen, G., Poncelet, F., & Golinval, J.-C. (2007). Physical interpretation of independent component analysis in structural dynamics. Mechanical Systems and Signal Processing, 21, 1561–1575. doi:10.1016/j.ymssp.2006.07.009

Kerschen, G., Poncelet, F., Golinval, J.-C., Vakakis, A. F., & Bergman, L. A. (2007). Identification of Linear and Nonlinear Systems using Signal Processing Techniques. In 26th Benelux Meeting on Systems and Control, Lommel, 2007.

Kerschen, G., Worden, K., Vakakis, A. F., & Golinval, J.-C. (2007). Nonlinear System Identification in Structural Dynamics: Current Status and Future Directions. In 25th International Modal Analysis Conference, Orlando, 2007.

Peeters, M., Viguié, R., Kerschen, G., & Golinval, J.-C. (2007). Practical Computation of Nonlinear Normal Modes Using Numerical Continuation Techniques. In International Workshop: Advancements in Design Optimization of Materials, Structures and Mechanical Systems, Xi'An, 2007.

Poncelet, F., Kerschen, G., Golinval, J.-C., & Marin, F. (2007). System Identification in Structural Dynamics Using Blind Source Separation Techniques. In 7th International Conference on ICA and Signal, Londres, 2007.

Poncelet, F., Kerschen, G., Golinval, J.-C., & Marin, F. (2007). Blind source separation techniques - Another way of doing operational modal analysis. In International Operational Modal Analysis Conference, Copenhague, 2007.

Poncelet, F., Kerschen, G., Golinval, J.-C., & Verhelst, D. (2007). Output-only modal analysis using blind source separation techniques. Mechanical Systems and Signal Processing, 21 (6), 2335-2358. doi:10.1016/j.ymssp.2006.12.005

Poncelet, F., Kerschen, G., Golinval, J.-C., & Verlest, D. (2007). BLIND SOURCE SEPARATION TECHNIQUES FOR MODAL ANALYSIS: EXPERIMENTAL DEMONSTRATION. In International Conference on Engineering Dynamics, Carvoeiro, 2007.

Rochus, V., & Golinval, J.-C. (2007). Electro-mechanical Coupling in MEMS: Modeling and Experimental Validation [Paper presentation]. International Workshop: Advancements in Design Optimization of Materials, Structures and Mechanical Systems, Xi'An, China.

Viguié, R., Kerschen, G., Golinval, J.-C., Bergman, L. A., Vakakis, A. F., & van de Wouw, N. (2007). Using Targeted Energy Transfer to Stabilize Drill-string Systems. In 25th International Modal Analysis Conference, Orlando, 2007.

Worden, K., Kerschen, G., Vakakis, A. F., & Golinval, J.-C. (2007). Nonlinear System Identification in Structural Dynamics: A Short (and Biased) History. In 25th International Modal Analysis Conference, Orlando, 2007.

Bruls, O., Duysinx, P., & Golinval, J.-C. (November 2006). Simulation and optimization of controlled multibody systems: Application to vehicle dynamics [Paper presentation]. ITCT 2006, Paris, France.

Bruls, O., Kerschen, G., Collignon, G., Cornez, S., Vandenplas, X., Bolland, M., Golinval, J.-C., Vandenrijt, J.-F., Granville, D., & Rochus, P. (November 2006). Participation of the undergraduate students to the solar panels design of the educational spacecraft ESEO [Paper presentation]. ITCT 2006, Paris, France.

Bruls, O., & Golinval, J.-C. (October 2006). The generalized-alpha method in mechatronic applications. ZAMM - Zeitschrift für Angewandte Mathematik und Mechanik, 86 (10 Sp. Iss. SI), 748-758. doi:10.1002/zamm.200610283

Bruls, O., Duysinx, P., & Golinval, J.-C. (2006). An extended flexible multibody dynamics software for mechatronic applications. In Proceedings of ISMA 2006 (pp. 10).

Lepage, S., & Golinval, J.-C. (17 July 2006). Stochastic Finite Element Analysis of Thermoelastic Effects in Micro-Resonators [Paper presentation]. 7th World Congress on Computational Mechanics, Los Angeles, United States - California.

Rochus, V., Rixen, D. J., & Golinval, J.-C. (June 2006). Coupled electro-mechanics simulation methodology of the dynamic pull-in in micro-systems. Sensor Letters, 4 (2), 206-213. doi:10.1166/sl.2006.017

Kerschen, G., Worden, K., Vakakis, A. F., & Golinval, J.-C. (April 2006). Past, present and future of nonlinear system identification in structural dynamics. Mechanical Systems and Signal Processing, 20 (3), 505-592. doi:10.1016/j.ymssp.2005.04.008

Rochus, V., Rixen, D. J., & Golinval, J.-C. (2006). On the Advantages of Using a Strong Coupling Variational Formulation to Model Electro-Mechanical Problem. In Thermal, Mechanical and Multiphysics Simulation and Experiments in Micro/Nanoelectronics and Systems, Proceedings of EuroSimE 2006. doi:10.1109/ESIME.2006.1643965

Yan, A.-M., & Golinval, J.-C. (April 2006). Null subspace-based damage detection of structures using vibration measurements. Mechanical Systems and Signal Processing, 20 (3), 611-626. doi:10.1016/j.ymssp.2005.04.010

Lepage, S., & Golinval, J.-C. (2006). Modeling and Uncertainty Quantification of Thermoelastic Damping in Micro-Resonators [Paper presentation]. International Modal Analysis Conference (IMAC XXIV), St Louis, United States - Missouri.

Rochus, V., Rixen, D. J., & Golinval, J.-C. (22 January 2006). Monolithic modelling of electro-mechanical coupling in micro-structures. International Journal for Numerical Methods in Engineering, 65 (4), 461-493. doi:10.1002/nme.1450

Bolland, M., Collignon, G., Vandenplas, X., Kerschen, G., Vandenrijt, J.-F., Golinval, J.-C., Granville, D., & Rochus, P. (2006). PARTICIPATION OF UNDERGRADUATE STUDENTS TO THE SOLAR PANELS DESIGN OF THE EDUCATIONAL SPACECRAFT ESEO [Paper presentation]. Conf. de l'Association Aéronautique et Astronautique de France(AAAF), Paris, France.

Bruls, O., Duysinx, P., & Golinval, J.-C. (2006). A model reduction method for the control of rigid mechanisms. Multibody System Dynamics, 15 (3), 213-227. doi:10.1007/s11044-006-1354-8

Lemaire, E., Duysinx, P., Rochus, V., & Golinval, J.-C. (2006). Topology optimization of electromechanical microsystems against pull-in voltage [Paper presentation]. Eurosime 2006, Como, Italy. doi:10.1109/ESIME.2006.1644038

Lemaire, E., Duysinx, P., Rochus, V., & Golinval, J.-C. (2006). Improvement of Pull-in Voltage of Electromechanical Microbeams Using Topology Optimization. In 3rd European Conference on Computational Mechanics (ECCM).

Lemaire, E., Rochus, V., Fleury, C., Golinval, J.-C., & Duysinx, P. (2006). MAXIMIZATION OF PULL-IN VOLTAGE OF MICRO-ELECTROMECHANICAL STRUCTURES USING TOPOLOGY OPTIMIZATION [Paper presentation]. 7th World Congress on Computational Mechanics, Los Angeles, United States.

Lepage, S., Le Traon, O., KLapka, I., Masson, S., & Golinval, J.-C. (2006). THERMOELASTIC DAMPING IN VIBRATING BEAM ACCELEROMETER: A NEW THERMOELASTIC FINITE ELEMENT APPROACH [Paper presentation]. CANEUS 2006, Toulouse, France.

Peeters, M., Georgiades, F., Viguié, R., Sérandour, G., Kerschen, G., & Golinval, J.-C. (2006). Development of Numerical Algorithms for Practical Computation of Nonlinear Normal Modes. In International Conference on Noise and vibration Engineering, Leuven, 2006.

Poncelet, F., Kerschen, G., & Golinval, J.-C. (2006). Experimental modal analysis using blind source separation techniques. In International Conference on Noise and Vibration Engineering, Leuven, 2006.

Rochus, V., Louis, C., Golinval, J.-C., Mendez, C., & Klapka, I. (2006). Model of Electrostatic Actuated Deformable Mirror using Strongly Coupled Electro-Mechanical Finite Element. In Proceeding of Design, Test, Integration and Packaging (pp. 6). TIMA Editions.

Rochus, V., Rixen, D., & Golinval, J.-C. (2006). Correlation of Experimental and Numerical Results on Electrostatically Actuated Micro-Beams. Technical Proceedings of the 2006 NSTI Nanotechnology Conference and Trade Show, 3.

Yan, A.-M., De Boe, P., & Golinval, J.-C. (2006). Détection et localisation d’endommagements structuraux par la méthode des sous-espaces, le modèle de Kalman et la méthode d’analyse en composantes principales. Mécanique and Industries, 7, 365-372. doi:10.1051/meca:2006050

Bruls, O., & Golinval, J.-C. (October 2005). The generalized-alpha method in mechatronics : Application to a semi-active car suspension [Paper presentation]. ECMI Workshop – Numerical Methods in Multibody Dynamics, Bad Herrenalb, Germany.

Yan, A. M., & Golinval, J.-C. (October 2005). Structural damage localization by combining flexibility and stiffness methods. Engineering Structures, 27 (12), 1752-1761. doi:10.1016/j.engstruct.2005.04.017

Poncelet, F., Kerschen, G., Golinval, J.-C., & Marin, F. (2005). Second-order blind identification for operational modal analysis [Paper presentation]. ASME International Design Engineering Technical Conferences, Las Vegas, Nevada, United States.

Rochus, V., Kerschen, G., & Golinval, J.-C. (2005). Dynamic analysis of the nonlinear behavior of MEMS using the finite element formulation. In ASME International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Long Beach, 2005.

Kerschen, G., Golinval, J.-C., Vakakis, A. F., & Bergman, L. A. (August 2005). The method of proper orthogonal decomposition for dynamical characterization and order reduction of mechanical systems: An overview. Nonlinear Dynamics, 41 (1-3), 147-169. doi:10.1007/s11071-005-2803-2

Poncelet, F., Marin, F., Fleury, C., & Golinval, J.-C. (2005). Optimal design of fixtures for vibration testing of structures on electro-dynamic shaker [Paper presentation]. Twelfth International Congress on sound and Vibration, Lisbon, Portugal.

Yan, A. M., Kerschen, G., De Boe, P., & Golinval, J.-C. (July 2005). Structural damage diagnosis under varying environmental conditions - Part II: local PCA for non-linear cases. Mechanical Systems and Signal Processing, 19 (4), 865-880. doi:10.1016/j.ymssp.2004.12.003

Yan, A.-M., Kerschen, G., De Boe, P., & Golinval, J.-C. (July 2005). Structural damage diagnosis under varying environmental conditions - Part I: A linear analysis. Mechanical Systems and Signal Processing, 19 (4), 847-864. doi:10.1016/j.ymssp.2004.12.002

Bruls, O., Duysinx, P., & Golinval, J.-C. (2005). A unified finite element framework for the dynamic analysis of controlled flexible mechanisms. In Proceedings of the ECCOMAS Conference on Advances in Computational Multibody Dynamics (pp. 16).

Kerschen, G., Yan, A. M., & Golinval, J.-C. (07 February 2005). Distortion function and clustering for local linear models. Journal of Sound and Vibration, 280 (1-2), 443-448. doi:10.1016/j.jsv.2004.02.043

Kerschen, G., De Boe, P., Golinval, J.-C., & Worden, K. (February 2005). Sensor validation using principal component analysis. Smart Materials and Structures, 14 (1), 36-42. doi:10.1088/0964-1726/14/1/004

Kerschen, G., & Golinval, J.-C. (January 2005). Generation of accurate finite element models of nonlinear systems - Application to an aeroplane-like structure. Nonlinear Dynamics, 39 (1-2), 129-142. doi:10.1007/s11071-005-1919-8

Lepage, S., & Golinval, J.-C. (2005). Modélisation par éléments finis du couplage thermo-élastique dans les structures vibrantes [Paper presentation]. 7ème Colloque National en Calcul des Structures, Giens, France.

Lepage, S., & Golinval, J.-C. (2005). Finite element modeling of the thermoelastic damping in micro-electromechanical systems [Paper presentation]. Third international conference on Advanced Computational Methods in Engineering (ACOMEN 2005), Ghent, Belgium.

Rochus, V., Rixen, D., & Golinval, J.-C. (2005). Simulation of Strong Coupling and Dynamic Pull-in [Paper presentation]. 1st Delft Center for Mechatronics and Microsystems (DCMM) Research Meeting, Delft, Netherlands.

Rochus, V., Rixen, D., & Golinval, J.-C. (2005). Finite Element Modeling of Electro-Mechanical Coupling in Capacitive Micro-Systems [Paper presentation]. 8th Internationale Conference on Modeling and Simulation of Microsystems, Anaheim, California, United States.

Rochus, V., Rixen, D. J., & Golinval, J.-C. (2005). Electrostatic coupling of MEMS structures: transient simulations and dynamic pull-in. Nonlinear Analysis: Theory, Methods and Applications, 63, 1619 – e1633. doi:10.1016/j.na.2005.01.055

Rochus, V., Rixen, D. J., & Golinval, J.-C. (2005). Coupled Electro-Mechanics Simulation Methodology of the Dynamic Pull-in in Micro-Systems [Paper presentation]. EuroSime 2005 Conference:Termal, Mechanical and Multiphysics Simulation and Experiments in Micro-Electronics and Microsystems, Berlin, Germany. doi:10.1109/ESIME.2005.1502828

Yan, A.-M., Golinval, J.-C., & Marin, F. (2005). Fault Detection Algorithm based on Null-Space Analysis for On-Line Structural Health Monitoring [Paper presentation]. International Modal Analysis Conference (IMAC XXIII), Orlando, United States - Florida.

Kerschen, G., & Golinval, J.-C. (2004). A 2-step methodology for the generation of accurate FE models of nonlinear systems. In ASME Internaional Mechanical Engineering Congress, Anaheim, 2004.

Kerschen, G., & Golinval, J.-C. (07 August 2004). A model updating strategy of non-linear vibrating structures. International Journal for Numerical Methods in Engineering, 60 (13), 2147-2164. doi:10.1002/nme.1040

Bruls, O., Duysinx, P., & Golinval, J.-C. (2004). Generation of closed-form models for the control of flexible mechanisms: a numerical approach. In Proc. of the 7th Int. Conf. on Motion and Vibration Control (MOVIC) (pp. 1-10).

Bruls, O., Duysinx, P., & Golinval, J.-C. (2004). A systematic model reduction method for the control of flexible multibody systems. In Proc. of the 21st Int. Congress of Theoretical and Applied Mechanics (ICTAM) (pp. 1-2).

Kerschen, G., & Golinval, J.-C. (22 July 2004). Comments on "interpreting proper orthogonal modes of randomly excited linear vibration systems" [letter to the editor]. Journal of Sound and Vibration, 274 (3-5), 1091-1092. doi:10.1016/j.jsv.2004.01.001

Yan, A. M., De Boe, P., & Golinval, J.-C. (June 2004). Structural damage diagnosis by Kalman model based on stochastic subspace identification. Structural Health Monitoring, 3 (2), 103-119. doi:10.1177/1475921704042545

Bruls, O., Duysinx, P., & Golinval, J.-C. (March 2004). Reliable simulation of mechatronic systems using Newmark algorithms [Paper presentation]. EUROMECH Colloquium on Advances in Simulation Techniques for Applied Dynamics (EUROMECH 452), Halle, Germany.

Kerschen, G., & Golinval, J.-C. (February 2004). Feature extraction using auto-associative neural networks. Smart Materials and Structures, 13 (1), 211-219. doi:10.1088/0964-1726/13/1/025

Brasseur, M., De Boe, P., Golinval, J.-C., Tamaz, P., Caule, P., Embrechts, J.-J., & Nemerlin, J. (2004). Placement of Piezoelectric Laminate Actuator for Active Structural Acoustic Control [Paper presentation]. ISMA 2004, Leuven, Belgium.

Caule, P., Tamaz, P., Brasseur, M., De Boe, P., Golinval, J.-C., Nemerlin, J., & Embrechts, J.-J. (2004). Active noise insulation in frontages of buildings [Paper presentation]. 33rd Inter-Noise Congress, Prague, Czechia.

Golinval, J.-C., De Boe, P., Yan, A. M., & Kerschen, G. (2004). Structural damage detection based on PCA of vibration measurements. In 58th Meeting of the Soc. for Mach. Failure Prevention Tech, Virginia Beach, 2004.

Kerschen, G., De Boe, P., Golinval, J.-C., & Worden, K. (2004). Sensor Validation for On-line Vibration Monitoring. In 2nd European Workshop on Structural Health Monitoring, Munich, 2004.

Kerschen, G., Lenaerts, V., Golinval, J.-C., & Feeny, B. F. (2004). Proper Orthogonal modes for the characterisation of nonlinear dynamic systems. In Euromech Colloquim on Nonlinear Modes of Vibrating Systems, Frejus, 2004.

Lejeune, J.-M., Lepage, S., Rochus, V., & Golinval, J.-C. (2004). F.E. modelling of electro-mechanical and thermo-elastic couplings in micro-system [Paper presentation]. PAI, Bruxelles, Belgium.

Lejeune, J.-M., Rochus, V., & Golinval, J.-C. (2004). Finite element computation of electromechanical micro-switches and micro-pump actuators [Paper presentation]. 15th International Invitational Symposium on the Unification of Analytical, Computational, and Experimental Solution Methodologies, Springfield, United States - Massachusetts.

Lenaerts, V., Kerschen, G., Golinval, J.-C., Ruzzene, M., & Giorcelli, E. (2004). Validation of two nonlinear system identification techniques using an experimental testbed. Shock and Vibration, 11 (3-4), 365-375. doi:10.1155/2004/203405

Rochus, V., Rixen, D. J., & Golinval, J.-C. (2004). Electrostatic Coupling of MEMs Structures: Transient Simulations and Dynamic Pull-in [Paper presentation]. Workshop on Coupled Processes and Phenomena(WCNA-2004), Orlando, Floride, United States.

Rochus, V., rixen, D., & Golinval, J.-C. (2004). Dynamical behaviour of electro-mechanical coupled problem [Paper presentation]. Conference EUROMECH, Halle, Germany.

Yan, A. M., Kerschen, G., De Boe, P., & Golinval, J.-C. (2004). Structural damage diagnosis under changing environmental conditions. In 7th International Conference on Motion and Vibration Control, Saint Louis, 2004.

Yan, A.-M., Marin, F., & Golinval, J.-C. (2004). Null-Subspace Analysis for Structural Damage Monitoring in Fatigue Testing of Luminaires [Paper presentation]. International Conference on Noise and Vibration Engineering, ISMA 2004, Leuven, Belgium.

Kerschen, G., & Golinval, J.-C. (2003). On the development of a model updating strategy of nonlinear vibrating structures. In ASME International Design Engineering Technical Conferences, Chicago, 2003. doi:10.1115/detc2003/vib-48438

Bruls, O., Duysinx, P., & Golinval, J.-C. (2003). A model reduction method for the control of rigid mechanisms. In Proceedings of the ECCOMAS Conference on Advances in Computational Multibody Systems.

Kerschen, G., Golinval, J.-C., & Hemez, F. M. (July 2003). Bayesian model screening for the identification of nonlinear mechanical structures. Journal of Vibration and Acoustics, 125 (3), 389-397. doi:10.1115/1.1569947

Rochus, V., Rixen, D. J., & Golinval, J.-C. (2003). Consistent Vibration Analysis of Electrostatically Coupled Structures: Application to Microsystems [Paper presentation]. Tenth International Congress on Sound and Vibration, Stockholm, Sweden.

Kerschen, G., Lenaerts, V., & Golinval, J.-C. (08 May 2003). Identification of a continuous structure with a geometrical non-linearity. Part I: Conditioned reverse path method. Journal of Sound and Vibration, 262 (4), 889-906. doi:10.1016/S0022-460X(02)01151-3

Lenaerts, V., Kerschen, G., & Golinval, J.-C. (08 May 2003). Identification of a continuous structure with a geometrical non-linearity. Part II: Proper orthogonal decomposition. Journal of Sound and Vibration, 262 (4), 907-919. doi:10.1016/S0022-460X(02)01132-X

Bruls, O., Duysinx, P., & Golinval, J.-C. (2003). Computational environment for the design of flexible mechanisms with feedback control. In Proceeding of 6th National Congress on theorical and Applied Mechanics.

Marin, F., Golinval, J.-C., Marville, C., & Blochouse, A. (2003). Wind Excitation and Severity of Standards Used for the Vibration Testing of Luminaires [Paper presentation]. 6th National Congress on Theoretical and Applied Mechanics, Gent, Belgium.

Rochus, V., Rixen, D. J., & Golinval, J.-C. (2003). Modeling of Electro-Mechanical Coupling Problem using the Finite Element Formulation [Paper presentation]. SPIE's 10th Annual International Symposium on Smart Structures and Materials, San Diego, United States.

Bodeux, J.-B., & Golinval, J.-C. (January 2003). Modal identification and damage detection using the data-driven stochastic subspace and ARMAV methods. Mechanical Systems and Signal Processing, 17 (1), 83-89. doi:10.1006/mssp.2002.1543

Bruls, O., & Golinval, J.-C. (2003). Simulation of an Active Control System in a Hot-Dip Galvanizing Line, Virtual Nonlinear Multibody Systems. NATO Review, 103, 325-332.

De Boe, P., & Golinval, J.-C. (2003). Principal component analysis of Piezo-Sensor Array for damage localization. Structural Health Monitoring, 2 (2), 137-144. doi:10.1177/1475921703002002005

De Boe, P., Yan, A.-M., & Golinval, J.-C. (2003). Substructure Damage Detection by Principal Component Analysis : Application to Environmental Vibration Testing [Paper presentation]. Fourth Workshop on Structural Health Monitoring, Stanford, United States - California.

Golinval, J.-C., Kerschen, G., Lenaerts, V., Thouverez, F., & Argoul. (2003). European COST action F3 on structural dynamics. Working group 3: identification of non-linear systems. Introduction and conclusions. Mechanical Systems and Signal Processing.

Golinval, J.-C., Kerschen, G., Lenaerts, V., Thouverez, F., & Argoul, P. (January 2003). Working group 3- Identification of non-linear systems. Mechanical Systems and Signal Processing, 17 (1), 177-178. doi:10.1006/mssp.2002.1549

Golinval, J.-C., & Link, M. (Eds.). (2003). Identification, Health Monitoring and Damage Detection of Structural Dynamic Systems: Results Obtained Within the European COST Research Network. London, United Kingdom: Academic Press. doi:10.1006/mssp.2002.1532

Golinval, J.-C., & Link, M. (January 2003). Cost Action F3 'Structural Dynamics' (1997-2001) - An European Co-operation in the Field of Science and Technology. Mechanical Systems and Signal Processing, 17 (1), 3-7. doi:10.1006/mssp.2002.1533

Kerschen, G., Feeny, B. F., & Golinval, J.-C. (2003). On the exploitation of chaos to build reduced-order models. Computer Methods in Applied Mechanics and Engineering, 192 (13-14), 1785-1795. doi:10.1016/S0045-7825(03)00206-8

Kerschen, G., & Golinval, J.-C. (2003). Validating structural models in non-linear dynamics. In 6ème congrès national de Mécanique Th. et App., Gent, 2003.

Kerschen, G., & Golinval, J.-C. (2003). Auto-associative neural networks, Part II: Feacture extraction for non-linear model updating. In 8th Internationale Conference on Recent Advances in Structural Dynamics, Southampton, 2003.

Kerschen, G., & Golinval, J.-C. (2003). Auto-associantive neural networks, Part I: Replacement of missing sensor values. In 8th Internationale Conference on Recent Advances in Structural Dynamics, Southampton, 2003.

Kerschen, G., Lenaerts, V., & Golinval, J.-C. (2003). VTT benchmark: Application of the restoring force surface method. Mechanical Systems and Signal Processing, 17 (1), 189-193. doi:10.1006/mssp.2002.1558

Lenaerts, V., Kerschen, G., & Golinval, J.-C. (January 2003). ECL benchmark: Application of the proper orthogonal decomposition. Mechanical Systems and Signal Processing, 17 (1), 237-242. doi:10.1006/mssp.2002.1565

Marin, F., Golinval, J.-C., Marville, C., & Blochouse, A. (2003). Comparison of the Severity of Standards Used for the Vibration Testing of Luminaires [Paper presentation]. ASTELAB 2003, Paris, France.

Molina, F. J., Pascual, R., & Golinval, J.-C. (January 2003). Description of the STEELQUAKE benchmark. Mechanical Systems and Signal Processing, 17 (1), 77-82. doi:10.1006/mssp.2002.1542

Rochus, V., Duysinx, P., & Golinval, J.-C. (2003). Modeling of the influence of electric forces on mechanical structures [Paper presentation]. Proceedings of the 6th National Congress on Theoretical and Applied Mechanics, Gent, Belgium.

SIMON, D., & Golinval, J.-C. (2003). Use of Whole-Field Displacement Measurements for Model Updating of Blades [Paper presentation]. Proceedings of IMAC XXI, Kissimmee, United States - Florida.

Thonon, C., & Golinval, J.-C. (January 2003). Results obtained by minimising natural frequency and mac-value errors of a beam model. Mechanical Systems and Signal Processing, 17 (1), 65-72. doi:10.1006/mssp.2002.1540

Yan, A.-M., De Boe, P., & Golinval, J.-C. (2003). Structural Integrity Monitoring by Vibration Measurements [Paper presentation]. Fracture Mechanics 2003, Shanghai, China.

Yan, A.-M., De Boe, P., & Golinval, J.-C. (2003). Structural integral monitoring by vibration measurements. FM2003 - Structural Integrity and Materials Aging, 363-370.

Yan, A.-M., & Golinval, J.-C. (2003). Model Updating Based on Frequency Response Functions Using A General Finite Element Code. European Journal of Mechanical and Environmental Engineering, 48 (3), 149-162.

Golinval, J.-C., Kerschen, G., Lenaerts, V., Thouverez, F., & Argoul, P. (2002). "European Cost action F3 on structural dynamics. WG3: identification of non-linear systems.Activities and Results". In International Conference on Noise and Vibration Engineering, Leuven, 2002.

Kerschen, G., Feeny, B. F., & Golinval, J.-C. (2002). On the exploitation of chaos to build reduced-order models. In International Conference on Noise and Vibration Engineering, Leuven, 2002.

Bruls, O., Duysinx, P., & Golinval, J.-C. (2002). An Adaptation of the Newmark Scheme for the Integrated Simulation of Mechatronic Systems. In Proceeding of 6th Int. Conf. on Motion and Vibration Control (MOVIC) (pp. 484-489).

Kerschen, G., & Golinval, J.-C. (25 July 2002). Non-linear generalization of principal component analysis: From a global to a local approach. Journal of Sound and Vibration, 254 (5), 867-876. doi:10.1006/jsvi.2001.4129

Bruls, O., & Golinval, J.-C. (2002). Simulation of an Active Control System in a Hot-Dip Galvanizing Line. In Preprints of the NATO Advanced Study Institute on Virtual Nonlinear Multibody Systems (pp. 39-44).

Kerschen, G., & Golinval, J.-C. (2002). Feature extraction for non-linear model updating. In International Conference on Structural Dynamics Modelling, Funchal, 2002.

Bruls, O., De Boe, P., Duysinx, P., & Golinval, J.-C. (2002). Integrated simulation of mechanical structures and their control system. In Proc. of the 2nd Int. Conf. on Advanced Computational Methods in Engineering (ACOMEN) (pp. 1-10).

Rochus, V., Duysinx, P., & Golinval, J.-C. (2002). Finite Element Analysis of the Electro-Mechanical Coupling in MEMS [Paper presentation]. Proceedings of ACOMEN 2002, Liège, Belgium.

Bruls, O., & Golinval, J.-C. (March 2002). Active Control of the Steel Strip in a Hot-Dip Galvanizing Line [Paper presentation]. 21st Benelux Meeting on Systems and Control, Veldhoven, Netherlands.

Kerschen, G., & Golinval, J.-C. (2002). Frequency domain approaches for the identification of an experimental beam with a local nonlinearity. In 20th International Modal Analysis Conference, Los Angeles, 2002.

Kerschen, G., & Golinval, J.-C. (31 January 2002). Physical interpretation of the proper orthogonal modes using the singular value decomposition. Journal of Sound and Vibration, 249 (5), 849-865. doi:10.1006/jsvi.2001.3930

Marin, F., Golinval, J.-C., & Marville, C. (2002). Accelerated Fatigue Testing Methodology of Luminaires on Electro-Dynamic Shaker [Paper presentation]. ACOMEN 2002, Liège, Belgium.

Pascual, R., Razeto, M., Golinval, J.-C., & Schalchli, R. (2002). A Robust FRF-based Technique for Model Updating [Paper presentation]. ISMA27 - International Conference on Noise and Vibration Engineering, Leuven, Belgium.

Rochus, V., Duysinx, P., & Golinval, J.-C. (2002). Modeling of Electro-mechanical coupling in MEMS [Paper presentation]. PAI, Bruxelles, Belgium.

Simon, D., & Golinval, J.-C. (2002). Finite Element Model Updating of Plate-like Structures Using Modal Holographic Measurement Field [Paper presentation]. International Congress on Quality Assessment of Numerical Simulations in Engineering (QUANSE 2002), Concepción, Chile.

Worden, K., Molina, F., Pascual, R., Golinval, J.-C., Maeck, J., & De Roeck, G. (2002). COST Action F3 on Structural Dynamics: Benchmarks for Structural Health Monitoring [Paper presentation]. ISMA27 - International Conference on Noise and Vibration Engineering, Leuven, Belgium.

Kerschen, G., Lenaerts, V., & Golinval, J.-C. (2001). Experimental identification of a non-linear beam, conditionned reverse path method. In International Conference on Structural Systems Identification, Kassel, 2001.

Bodeux, J.-B., & Golinval, J.-C. (June 2001). Application of ARMAV models to identification and damage detection of mechanical and civil engineering structures. Smart Materials and Structures, 10 (3), 479-489. doi:10.1088/0964-1726/10/3/309

BODEUX, J.-B., & Golinval, J.-C. (2001). Modal Identification of the "Steel-Quake" Structure Using the Data-Driven Stochastic Subspace and ARMAV Methods [Paper presentation]. International Conference on Structural System Identification, Kassel, Germany.

Bruls, O., De Boe, P., & Golinval, J.-C. (2001). Stabilisation vibratoire de la ligne de galvanisation Eurogal - Etude paramétrique. (Internal Report VIS-RE-48). University of Liège.

De Boe, P., & Golinval, J.-C. (2001). Damage Localisation Using Principal Component Analysis of Distributed Sensor Array [Paper presentation]. Third Workshop on Structural Health Monitoring, Stanford, United States - California.

Golinval, J.-C., & Argoul, P. (2001). COST F3 Structural Dynamics 1997-2001, Presentation and Some Preliminary Results [Paper presentation]. 3rd International Workshop on Structural Control, Paris, France.

Kerschen, G., Golinval, J.-C., & Worden, K. (2001). Theoretical and experimental identification of a non-linear beam. Journal of Sound and Vibration, 244, 597-613. doi:10.1006/jsvi.2000.3490

Kerschen, G., Lenaerts, V., & Golinval, J.-C. (2001). Identification of wire rope isolators using the restoring force surface method. In International Conference on Structural Systems Identification, Kassel, 2001.

Lenaerts, V., Kerschen, G., & Golinval, J.-C. (2001). Proper orthogonal decomposition for model updating of non-linear mechanical systems. Mechanical Systems and Signal Processing, 15(1), 31-43. doi:10.1006/mssp.2000.1350

Lenaerts, V., Kerschen, G., & Golinval, J.-C. (2001). Experimental identification of a non-linear beam, proper othogonal decomposition. In International Conference on Structural Systems Identification, Kassel, 2001.

Thonon, C., & Golinval, J.-C. (2001). Finite Element Model Updating of the Garteur SM-AG19 Structure [Paper presentation]. International Conference on Structural System Identification, Kassel, Germany.

BODEUX, J.-B., & Golinval, J.-C. (2000). ARMAV Model Technique for System Identification and Damage Detection [Paper presentation]. European COST F3 Conference on System Identification & Structural Health Monitoring, Madrid, Spain.

De Boe, P., & Golinval, J.-C. (2000). Identification of Electromechanical Coupling in Piezo-Structures [Paper presentation]. Seventh International Conference on Recent Advances in Structural Dynamics, Southampton, United Kingdom.

De Boe, P., & Golinval, J.-C. (2000). Actuator / Sensor Placement and Experimental Modal Analysis on Piezo-Structures [Paper presentation]. 5ème Congrès National de Mécanique Théorique et Appliquée, Louvain-la-Neuve, Belgium.

De Boe, P., Simon, D., & Golinval, J.-C. (2000). Strategies for Distributed Piezoelectric Actuator / Sensor Placement by Noise Effect Minimisation and Modal Controllability / Observability [Paper presentation]. ISMA25 - International Conference on Noise and Vibration Engineering, Leuven, Belgium.

Kerschen, G., Lenaerts, V., & Golinval, J.-C. (2000). Proper Orthogonal Decomposition and Model Reduction of Nonlinear Systems. In European Cost F3 Conference on system Identification & Structural Health Monitoring, Madrid, 2000.

Kerschen, G., Lenaerts, V., & Golinval, J.-C. (2000). Proper Orthogonal Decomposition and its Application in of Nonlinear Structures dynamics. In Proceedings.

Lenaerts, V., Kerschen, G., Trandafilova, I., Golinval, J.-C., Van Brussel, H., & Heylen, W. (2000). Detection, localisation and identification of nonlinearities in structural dynamics. In International Conference on noise and vibration Engineering, Leuven, 2000.

Lenearts, V., Kerschen, G., & Golinval, J.-C. (2000). Parameter identification of nolinear mechanical systems using POD. In 18th International Modal Analysis Conference, San Antonio, 2000.

Thonon, C., & Golinval, J.-C. (2000). Modal identification in presence of noise using an optimization approach [Paper presentation]. International Conference on Noise and Vibration Engineering (ISMA25), Leuven, Belgium.

Adam, O., Marin, F., Essers, J.-A., Golinval, J.-C., Léonard, O., & Thonon, C. (1999). Aerodynamic and Mechanical Design of Compressor Blades Including Static Analysis. In Proceedings od the 3rd World Congress of Structural and Multidisciplinary Optimization.

Pascual, R., Trendafilova, I., Golinval, J.-C., & Heylen, W. (1999). Damage Detection Using Model Updating and Identification Techniques [Paper presentation]. Second International Conference on Identification in Engineering Systems (IES’99), United Kingdom.

Pascual, R., Golinval, J.-C., & RAZETO, M. (1999). On-line Damage Assessment Using Operating Deflection Shapes [Paper presentation]. 17th International Modal Analysis Conference (Proceedings of IMAC XVII), Kissimmee, Florida, United States.

Golinval, J.-C., & Géradin, M. (1999). Punch Press Vibration Isolation: a Case History. Revue-M. Mécanique, 44 (3), 141-145.

Lenaerts, V., Golinval, J.-C., Ruzzene, M., & Giorcelli, E. (1999). Experimental Validation of Two Nonlinear Identification Techniques on a Single Degree of Freedom System [Paper presentation]. Second International Conference on Identification in Engineering Systems (IES’99), Swansea, United Kingdom.

Simon, D., & Golinval, J.-C. (1999). Finite Element Model Updating Based On Holographic and Speckle Interferometry Measurements: Rapport VIA-25 [Paper presentation]. Photonics and Mechanics (PHOTOMEC/ETE'99), Liège, Belgium.

De Boe, P., Pascual, R., & Golinval, J.-C. (1998). Identification of the Mechanical and Piezoelectric Parameters of a Massively Piezoelectric Structure [Paper presentation]. International Conference on Noise and Vibration Engineering, ISMA 23, Leuven, Belgium.

Pascual, R., Golinval, J.-C., & Razeto, M. (1998). On the Reliability of Error Localization Indicators [Paper presentation]. International Conference on Noise and Vibration Engineering, ISMA 23, Leuven, Belgium.

Adam, O., Marin, F., Thonon, C., Essers, J.-A., Golinval, J.-C., & Léonard, O. (1998). Developpement d'une méthodologie d'optimisation aérodynamique et mécanique d'aubes de compresseurs. RFM: Revue Française de Mécanique, 4, 247-253.

Pascual, R., Golinval, J.-C., Berthillier, M., & Despres, T. (1998). Updating Industrial Models Under a General Optimization Environnment [Paper presentation]. 16th International Modal Analysis Conference (Proceedings of IMAC XVI), Santa Barbara, United States - California.

Pascual, R., Golinval, J.-C., & Razeto, M. (1998). Model Updating Using Operating Deflection Shapes [Paper presentation]. 16th International Modal Analysis Conference (Proceedings of IMAC XVI), Santa Barbara, United States - California.

Adam, O., Thonon, C., Essers, J.-A., Golinval, J.-C., & Léonard, O. (1997). Développement d’une méthodologie d’optimisation aérodynamique et mécanique d’aubes de compresseurs. In Proceedings of the 4th Belgian National Congress on Theoretical and Applied Mechanics.

Pascual, R., Golinval, J.-C., & Razeto, M. (1997). A Frequency Domain Correlation Technique for Model Correlation and Updating [Paper presentation]. 15th International Modal Analysis Conference (IMAC XV), Orlando, United States - Florida.

Simon, D., & Golinval, J.-C. (1996). Dynamic Stress and Fatigue Life Prediction Using Modal Testing and Model Correlation [Paper presentation]. International Modal Analysis Conference (IMAC XIV), Dearborn, United States - Michigan.

Slangen, P., Lion, Y., Golinval, J.-C., & Géradin, M. (1995). Modal Analysis of Plate Structures Using Digital Speckle Pattern Interferometry [Paper presentation]. International Modal Analysis Conference (IMAC XIII), Nashville, United States - Tennessee.

Chen, S. L., Golinval, J.-C., & Géradin, M. (1994). A Dynamic Stiffness-Transfer Matrix Method for Forced Response Analysis of One-Dimensional Structures. Journal of Modal Analysis, (Avril).

Razeto, M., Golinval, J.-C., & Géradin, M. (1994). Modal Identification and Determination of Effective Mass Using Environmental Vibration Testing on an Electro-dynamic Shaker. In Proceedings of the International Modal Analysis Conference (IMAC XII). Society of Experimental Mechanics, Inc.

Benallal, A., Chabrand, P., Ghazouane, P., Chaudonneret, M., Culié, J.-P., Contesti, E., Gamha, H., Golinval, J.-C., & Turbat, A. (1990). Validation of Structural Computation Codes in Elastoviscoplasticity. International Journal for Numerical Methods in Engineering, 29, 1109-1130. doi:10.1002/nme.1620290514

Géradin, M., Golinval, J.-C., & Mascarell, J.-P. (1989). Three dimensional turbine blade analysis in thermo-viscoplasticity. Recherche Aérospatiale, 5 (Septembre-Octobre), 51-57.

Géradin, M., Golinval, J.-C., & Mascarell, J.-P. (1989). Analyse tridimensionnelle d'une aube de turbine en thermo-viscoplasticité. Recherche Aérospatiale, 5 (Septembre-Octobre), 51-57.