Publications of Eric Pirard
Bookmark and Share    
Full Text
See detailMatières premières et environnement - Défis pour le développement des compétences en Afrique Centrale
Pirard, Eric ULiege

Scientific conference (2017, May 16)

Historique des programmes de formation que l'ULiège a mis en place à destination de l'Afrique dans le domaine des ressources minérales. Obstacles rencontrés à la mise en oeuvre de certains projets et ... [more ▼]

Historique des programmes de formation que l'ULiège a mis en place à destination de l'Afrique dans le domaine des ressources minérales. Obstacles rencontrés à la mise en oeuvre de certains projets et défis qui nous attendent. Perception des stratégies propres à l'espace francophone dans une dynamique de numérisation et de mondialisation tous azimuts. [less ▲]

Detailed reference viewed: 38 (2 ULiège)
Full Text
See detailSHAPE ANALYSIS OF FINE AGGREGATES USED FOR CONCRETE
HE, Huan; Courard, Luc ULiege; Pirard, Eric ULiege et al

in Image Analysis and Stereology (2016), 35(3), 159-166

Fine aggregate is one of the essential components in concrete and significantly influences the material properties. As parts of natures, physical characteristics of fine aggregate are highly relevant to ... [more ▼]

Fine aggregate is one of the essential components in concrete and significantly influences the material properties. As parts of natures, physical characteristics of fine aggregate are highly relevant to its behaviors in concrete. The most of previous studies are mainly focused on the physical properties of coarse aggregate due to the equipment limitations. In this paper, two typical fine aggregates, i.e. river sand and crushed rock, are selected for shape characterization. The new developed digital image analysis systems are employed as the main approaches for the purpose. Some other technical methods, e.g. sieve test, laser diffraction method are also used for the comparable references. Shape characteristics of fine aggregates with different origins but in similar size ranges are revealed by this study. Compared with coarse aggregate, fine grains of different origins generally have similar shape differences. These differences are more significant in surface texture properties, which can be easily identified by an advanced shape parameter: bluntness. The new image analysis method is then approved to be efficient for the shape characterization of fine aggregate in concrete [less ▲]

Detailed reference viewed: 34 (3 ULiège)
Full Text
See detailFrom resource to process efficiency. Educating a new generation of georesources engineers
Pirard, Eric ULiege; Fiorentino, Rosalia ULiege

in Mazijn, Bernard (Ed.) Proceedings 8th Conference on Engineering Education for Sustainable Development (2016, September)

Even though the Circular Economy paradigm clearly puts the emphasis on recycling, it is essential to understand that we will still need for decades to explore and find resources in the earth crust. Mining ... [more ▼]

Even though the Circular Economy paradigm clearly puts the emphasis on recycling, it is essential to understand that we will still need for decades to explore and find resources in the earth crust. Mining is vital to feed the loop and make sure enough metals and minerals are made available to society. But, mining is also one of the most challenging industrial operations when it comes to sustainability objectives. A modern education in mineral resources engineering must build on a strong technical background but give students the opportunity to confront their knowledge with societal needs and responsibilities. The EMerald Erasmus Mundus Master program in Georesources Engineering was set up by four leading European universities with the clear objective to educate responsible professionals who will be actors of sustainable solutions. Therefore, the University of Lorraine, the Lulea Technical University, the TU Bergakademie Freiberg and the University of Liege (coordinator) designed a unique curriculum bridging the traditional gap between natural sciences and engineering, encompassing the valley too often separating the industrial operators from the stakeholders of a mining project. The program offers a unique blend of courses from geology to mineral processing with the aim to familiarize students with the most advanced tools for improving the efficiency of processes. Field trips and industrial visits are a key component of this program as are the non-technical seminars delivered by professionals (lawyers, entrepreneurs, NGO leaders, etc.). Evaluation is often based on written reports, documentary research and short oral presentations to make sure students acquire the indispensable soft skills for efficient communication on environmental and societal issues linked to the impact of extractive activities. Internships and hands-on practices on pilot platforms or laboratory equipments are absolutely essential to reach the highest standards and meet the objectives of the master program. This is costly and can only be maintained thanks to the strong presence of the participating universities in research programs. All four universities are core partners of the EIT Raw Materials knowledge innovation community. This gives an additional leveraging effect when it comes to the education of young entrepreneurs with a strong sustainability mindset. [less ▲]

Detailed reference viewed: 40 (5 ULiège)
Full Text
See detailEngineering education at the heart of the Raw Materials Value Chain
Pirard, Eric ULiege; Sonnemann, Guido

in Mazijn, Bernard (Ed.) Proceedings 8th Conference on Engineering Education for Sustainable Development (2016, September)

EIT Raw Materials has the mission to reinforce Europe’s innovation capacity by preparing the entrepreneurs and innovators of tomorrow. By fully integrating the three sides of the knowledge triangle ... [more ▼]

EIT Raw Materials has the mission to reinforce Europe’s innovation capacity by preparing the entrepreneurs and innovators of tomorrow. By fully integrating the three sides of the knowledge triangle (education, research and industry), the EIT Raw Materials aims at boosting the innovation process: from idea to product; from lab to market and from student to entrepreneur. A key mission of the EIT Raw Materials is to educate young professionals and specifically engineers and scientists by breaking the barriers of classical disciplines. The so-called T-shaped professional will have a strong entrepreneurial mindset and combine an in depth knowledge of his own discipline with a sound understanding of the challenges appearing along the whole raw materials value chain, such as exploration, extraction and processing of primary resources, recycling of secondary resources and substitution of critical and toxic materials. It is essential that these T-shaped professionals understand their role within the value chain as actors of a more circular economy. Every educational activity organized under the umbrella of the EIT Raw Materials (RM) Academy will therefore make sure to involve all stakeholders of the raw materials value chain and to contribute to raising awareness with respect to the societal function of raw materials and the related supply and availability challenges. To achieve these missions and create a long lasting impact, the RM Academy aims to innovate in terms of teaching, which includes: • The promotion of problem-based learning, self organisation and learning by doing. • The offer of an open learning environment and a series of online courses. • Enabling a high degree of mobility of students and professionals. • Facilitating access to experimental platforms and pilot plants for hands-on training • Adopting a strong multidisciplinary approach (e.g. joint courses across sectors) • Thinking beyond boundaries and systematically exploring and generating new ideas • Transforming innovations into feasible business solutions • Joint curriculum development Critical reflection, peer review processes as well as assessments and collegial discussions under the roof of the EIT Raw Material Academy will be used for continuing quality development of the programs. [less ▲]

Detailed reference viewed: 45 (1 ULiège)
Full Text
See detailLa quadrature de l'économie circulaire
Pirard, Eric ULiege

Scientific conference (2016, February 25)

La quadrature du cercle économique est une source d’inspiration et d’innovation pour tous les ingénieurs au Nord comme au Sud. Essayer de la résoudre, c’est contribuer sans conteste à une utilisation plus ... [more ▼]

La quadrature du cercle économique est une source d’inspiration et d’innovation pour tous les ingénieurs au Nord comme au Sud. Essayer de la résoudre, c’est contribuer sans conteste à une utilisation plus efficiente des ressources de notre planète. Mais pour cela, il est indispensable de bien comprendre l’ensemble de la chaîne de valeurs de la matière et d’éviter les leurres et les slogans simplistes comme « zero waste » ou « closing the loop » [less ▲]

Detailed reference viewed: 83 (5 ULiège)
Full Text
See detailDesign and calibration of a two-camera (VNIR and SWIR) hyperspectral acquisition system for the characterization of metallic alloys from the recycling industry
Barnabé, Pierre ULiege; Dislaire, Godefroid ULiege; Leroy, Sophie ULiege et al

in Journal of Electronic Imaging (2015), 24(6),

The conception of a prototype combining two hyperspectral cameras, one ranging from visible to near-infrared and the other covering short-wave infrared, is presented. The prototype aims at the ... [more ▼]

The conception of a prototype combining two hyperspectral cameras, one ranging from visible to near-infrared and the other covering short-wave infrared, is presented. The prototype aims at the characterization of millimeter-sized metallic alloys particles, originating from end-of-life vehicles and waste electrical and electronic equipment recycling. This paper is meant to serve as a support for a similar project by presenting difficulties encountered and available solutions. The calibration steps necessary to obtain quality reflectance data are also described. Classification results obtained on 100 metallic fragments dataset are finally presented. [less ▲]

Detailed reference viewed: 23 (4 ULiège)
Full Text
See detailL'odyssée des métaux : de la mine au GSM
Pirard, Eric ULiege

Scientific conference (2015, September 21)

Detailed reference viewed: 49 (5 ULiège)
Full Text
See detailGeophysical Investigation of the Pb-Zn deposit of Plombières, Belgium
Evrard, Maxime ULiege; Pirard, Eric ULiege; Nguyen, Frédéric ULiege

in André-mayer, anne-Sylvie; Cathelineau, Michel; Muchez, Philippe (Eds.) et al Mineral resources in a sustainable worl, proceeding, volume 5 (2015, August)

Detailed reference viewed: 59 (7 ULiège)
Full Text
See detailCritical metals in sphalerites from Belgian MVT deposits
Goffin, Vincent; Evrard, Maxime ULiege; Pirard, Eric ULiege

in André-Mayer, Anne-Sylvie; Cathelineau, Michel; Muchez, Philippe (Eds.) et al Proceedings of the 13th SGA Biennial Meeting (2015, August)

Belgium hosts a series of well documented low temperature, carbonate hosted, lead-zinc veins and lenses clearly categorized as MVT deposits. This paper revisits the distribution of trace elements in ... [more ▼]

Belgium hosts a series of well documented low temperature, carbonate hosted, lead-zinc veins and lenses clearly categorized as MVT deposits. This paper revisits the distribution of trace elements in sphalerites from Belgian deposits with a special focus on Ge, Ga and In. By comparing with a database of worldwide deposits, this paper shows that Belgian sphalerites do not display a classical substitution pattern involving Cu+. Instead, multivariate analysis points towards similarities with the Tres Marias deposit in Mexico, although the explanation of coupled substitution with Fe++ does not seem to apply in the present case. From the limited set of sphalerites analysed in this paper, the following rithmetic means are obtained: m(Ge) = 302 ppm, m(Ga) = 2.2 ppm and m(In) < 0.06 ppm. These average values should not hide the fact that a wide variability does exist from one deposit to the other and within zoned colloform sphalerites of the same deposit. Further nd systematic work is required to better evaluate the resource and understand the mechanisms responsible for Ge incorporation into sphalerite. [less ▲]

Detailed reference viewed: 79 (6 ULiège)
Full Text
See detailThe limits of sustainable metal resources availability
Pirard, Eric ULiege

Conference (2015, May 11)

The sustainable availability of raw materials used in manufacturing advanced products is a question that consumers will raise more and more in the future. In order to answer this legitimate request, it is ... [more ▼]

The sustainable availability of raw materials used in manufacturing advanced products is a question that consumers will raise more and more in the future. In order to answer this legitimate request, it is mandatory to define characterization factors capable of taking into account the geological scarcity of an element and also the social and environmental impact of its exploitation and beneficiation. But the specificities of metals also raise the question of their availability from recycling of end-of-life products. It makes no doubt that many products have a dispersive action because of their very low metal contents or because of the complex form under which the metal has been incorporated. The metal availability from recycling will need recycling indices to be developed and specific actions to be taken to fight against improper applications causing harmful resource degradation for the future generations [less ▲]

Detailed reference viewed: 60 (8 ULiège)
Full Text
See detailOn the Shape Simulation of Aggregate and Cement Particles in a DEM System
He, Huan; Stroeven, Piet; Pirard, Eric ULiege et al

in Advances in Materials Science and Engineering (2015)

Aggregate occupies at least three-quarters of the volume of concrete, so its impact on concrete’s properties is significant. Both size and shape of aggregate influence workability, mechanical properties ... [more ▼]

Aggregate occupies at least three-quarters of the volume of concrete, so its impact on concrete’s properties is significant. Both size and shape of aggregate influence workability, mechanical properties, and durability of concrete. On the other hand, the shape of cement particles plays also an important role in the hydration process due to surface dissolution in the hardening process. Additionally, grain dispersion, shape, and size govern the pore percolation process that is of crucial importance for concrete durability. Discrete element modeling (DEM) is commonly employed for simulation of concrete structure. To be able to do so, the assessed grain shape should be implemented. The approaches for aggregate and cement structure simulation by a concurrent algorithm-based DEM system are discussed in this paper. Both aggregate and cement grains were experimentally analyzed by X-ray tomography method recently. The results provide a real experimental database, for example, surface area versus volume distribution, for simulation of particles in concrete technology. Optimum solutions are obtained by different simplified shapes proposed for aggregate and cement, respectively. In this way, more reliable concepts for aggregate structure and fresh cement paste can be simulated by a DEM system. [less ▲]

Detailed reference viewed: 41 (15 ULiège)
Full Text
See detailRouvrir une mine à Plombières. Une utopie ?
Pirard, Eric ULiege

in Simons, Marc (Ed.) Plomb'hier à bonnes mines. (2014)

Plombières, Ferrières, Goldgrübe,… autant de noms qui dans nos régions renvoient aux sept métaux connus depuis l’Antiquité. Sept métaux comme les sept planètes ou les sept jours de la semaine à l’image ... [more ▼]

Plombières, Ferrières, Goldgrübe,… autant de noms qui dans nos régions renvoient aux sept métaux connus depuis l’Antiquité. Sept métaux comme les sept planètes ou les sept jours de la semaine à l’image d’un monde parfait. Pourtant, si pendant des siècles, ces métaux ont suffi à satisfaire nos besoins technologiques, il n’en va plus de même aujourd’hui : l’éolienne a remplacé le moulin à vent et l’ordinateur s’est substitué à la craie ! Avec la production de 900.000 t de zinc et 100.000 t de plomb, les gisements de Moresnet ont eu une importance historique majeure dans le développement d’une véritable industrie du zinc. Ils ont aussi joué un rôle important dans la découverte d’éléments rares comme le gallium. Notre société ne peut plus se passer de ces métaux, jamais leur exploitation n’a été aussi intense et ce malgré l’existence et le développement constant du recyclage. Les mines de nos régions ont fermé il y a près d’un siècle, faute de technologies adéquates pour localiser de nouvelles ressources ou pour réaliser une exhaure efficace. Très vite, il s’est avéré plus simple et plus rentable de faire venir le minerai de régions lointaines comme l’Afrique, l’Australie et aujourd’hui la Chine. Pourtant, rien ne dit qu’il ne reste pas des quantités significatives de zinc et de plomb dans notre sous-sol. Pour des raisons stratégiques évidentes, l’Europe souhaite que nous réévaluions nos ressources et nos réserves avec les moyens les plus modernes. Une mise en exploitation n’est pas pour autant à l’ordre du jour. Elle ne pourra de toute façon résulter que de la volonté concertée de tous les acteurs d’une région unis autour d’un même objectif. [less ▲]

Detailed reference viewed: 130 (14 ULiège)
Full Text
See detailIs Geometallurgy Teachable? A challenge for the new Erasmus Mundus EMerald
Pirard, Eric ULiege

Conference (2014, September 05)

designate any kind of advanced ore characterisation prior to mineral processing operations while in fact it should clearly refer to a multidisciplinary integration of geological, mining, metallurgical ... [more ▼]

designate any kind of advanced ore characterisation prior to mineral processing operations while in fact it should clearly refer to a multidisciplinary integration of geological, mining, metallurgical, environmental and economic information into a single orebody model. In order to instil the best available geometallurgical practices in the professional world, it seems essential to break the traditional cleavages among disciplines and educate a new generation of engineers. The Erasmus Mundus EMerald “Master in Georesources Engineering” program initiated by four European universities under the coordination of University of Liege, has been designed to exactly tackle this challenge. It is not surprising that this program has been set up by universities having a long tradition in mixing a double perspective of geology and engineering (Nancy; Lulea; Liege and Freiberg). Geometallurgy requires both an excellent understanding of the natural variability and complexity of an ore and a comprehensive overview of the techniques available to extract and concentrate any valuable material. The course program has been designed to achieve a right balance between knowledge of mineral resources (geology, resource characterisation, reserve estimation, modelling) and processing (comminution, preconcentration, leaching, waste disposal,...). It also includes a broader view on life cycle analysis and urban mining. A series of professional seminars, suggested by an industrial advisory board, shed light on strategic issues, economic and environmental challenges, corporate social responsibilities, etc. Mobility and multicultural experience is an added-value of the Erasmus Mundus experience which definitely contributes to breeding engineers for tomorrow. [less ▲]

Detailed reference viewed: 123 (10 ULiège)
Full Text
See detailFrom geometallurgy to ecometallurgy:Building mines for the future
Pirard, Eric ULiege

Conference (2014, September 02)

geometallurgy will become the central pivot of a successful mining operation. Recently, Europe has awakened from a long period of lethargy in the raw materials sector. A series of important initiatives ... [more ▼]

geometallurgy will become the central pivot of a successful mining operation. Recently, Europe has awakened from a long period of lethargy in the raw materials sector. A series of important initiatives inspired by the European Innovation Partnership (EIP) have paved the way for more intense cooperation between industry, research centres and universities. Among these, the establishment of a Knowledge Innovation Community (KIC) in 2015 will definitely boost innovation and education in the sector. Interestingly, EIP addresses the whole value chain and considers mining, recycling and substitution as essential pillars of the raw materials policy. This vision strengthens the role of geometallurgy but also brings up the need for a close dialogue between mineralogists, metallurgists and product designers. Microelectronics and nanotechnologies are ubiquitous in our technologies and have greatly improved their functionality, but they have also made recycling and efficient recovery of metals a tough technical challenge. Our urban mines formed by the accumulation of end-of-life products should be scrutinized from now on using an ecometallurgical approach whereby important questions should be addressed such as: 1. Metal concentrations: Is the metal grade high enough to pay for recycling? Does the manufacturer help to maintain grades above a technological cut-off? 2. Metal speciation: Under which form (alloy, salt, organic compound,…) is the metal present? Is there a processing technology available to separate these species? 3. Metal paragenesis: What are the metal assemblages found in the product? Will it be feasible to separate those metals and at what costs? Are there penalty or contaminating elements associated? 4. Textural assemblage: How will the product behave during dismantling? Is it realistic to liberate a given component? What comminution strategy will be needed to achieve phase liberation? 5. Reserve estimation: What are the tonnages expected for this kind of product? Can selective collection be organised? 6. Homogeneity: What will the next generation of products look like? Should one expect strong differences in concentration, speciation, paragenesis, etc.? Will this kind of product be blended with others during collection? How will this impact on downstream recycling? Ecometallurgy, as introduced here, is essentially about establishing a dialogue with product designers and material scientists to make sure that, once unearthed, metals will remain easily and sustainably available for the future generations. Geologists and mineralogists, even though generally kept away from the synthetic materials, could greatly contribute to this progress by bringing their expertise in dealing with complex and variable orebodies of the future. [less ▲]

Detailed reference viewed: 124 (7 ULiège)
Full Text
See detailMineralogy of fine particles in slurry from multispectral imaging
Leroy, Sophie ULiege; Dislaire, Godefroid ULiege; Barnabé, Pierre ULiege et al

Conference (2014, September 02)

Quantitative mineralogy of fine particles in slurry from multispectral imaging Sophie Leroy, Godefroid Dislaire, Pierre Barnabé and Eric Pirard Mineral processing especially in its final stages relies ... [more ▼]

Quantitative mineralogy of fine particles in slurry from multispectral imaging Sophie Leroy, Godefroid Dislaire, Pierre Barnabé and Eric Pirard Mineral processing especially in its final stages relies heavily on the differential behavior of particles in pulps. In order to monitor hydrocyclones and flotation cells in almost real time, it is important to develop at line particle characterization providing information on particle distribution but also mineralogy. A sampling device has been elaborated based on a flow cell with variable wall spacing linked to a high pressure peristaltic pump. This setup allows for dispersion and dilution of the mineral slurry into the cell. Depending on the ore or gangue minerals to be controlled, particles can be imaged either in diffuse reflectance or in transmittance mode. A simple multispectral imaging module has been designed to acquire images at eight different wavelengths. The design is based on a series of dichroic filters thereby avoiding any moving part and enabling a very fast acquisition of multispectral images. Imaging artifacts due, among others, to specular reflectance from the glass window are minimized. Multispectral classification is used to outline particles appearing in the field of view and to qualify their main mineral component. In particular, areas reflecting a meaningful and discriminative spectrum are identified and compared to a multispectral database. The database is continuously enriched through testing of pure mineral particles under similar pulp conditions (dilution, grain size,…). Results of final classification are compared to the modal analysis obtained from polished blocks and conventional reflected light microscopy. The technology developed in this work sets the basis for at line monitoring of ore slurries with reasonably simple mineralogy. Extension of the spectral range is being considered for future developments. [less ▲]

Detailed reference viewed: 137 (18 ULiège)
Full Text
See detailImaging and understanding of iron ore granulation using X-ray mictrotomography
Evrard, Maxime ULiege; Contreras, Rafael; Pirard, Eric ULiege

Conference (2014, September)

Imaging and understanding of iron ore granulation using X-ray microtomography. Evrard M., Contreras R., Pirard E. Most iron ores cannot be directly fed into blast furnaces because their particle size ... [more ▼]

Imaging and understanding of iron ore granulation using X-ray microtomography. Evrard M., Contreras R., Pirard E. Most iron ores cannot be directly fed into blast furnaces because their particle size distribution will negatively impact the blast furnace permeability and hence the overall efficiency of the ore reduction process. The finest fraction (typ. < 6.3 mm) has to undergo a sintering process, wherein a mixture of iron ore, coke and flux (limestone, olivine,…) is heated, partially molten and transformed into pieces of sintered material with adequate size, porosity and strength characteristics to be fed into the blast furnace. The preparation of an adequate mixture involves a granulation process which is the subject of this study. Sintering and hence granulation of iron ores, is particularly important in Europe where iron ores show a downward trend in quality (finer particles, broader size range, lower grades with higher variability). In addition an increasing fraction of non-sintered material (return fines) is being added to the mix to optimize the resource efficiency while maintaining sinter quality. For most practitioners, microgranules (or micropellets) are considered as being composed of a nucleus (a particle in the range of 1 to 2 mm) surrounded by layers of the finest ore particles (typically the < 250 µm fraction). A series of experiments and 3D imaging tests have been performed in this study to better understand the granulation mechanisms. Microgranules are formed by mixing iron ore with water in a small rotating drum. Several parameters can be tuned during the granulation process: size and proportion of nucleating particles, size and proportion of fines, water addition, rotating speed, total duration,… Simple experiments using a single ore type (dominantly goethitic or hematitic) and water additions have been carried out systematically to better understand the kinetics of granulation. X-ray microtomography and subsequent 3D image analysis is used to identify and quantify the number of nuclei (when present), to measure the porosity and identify layering or cracks in the microgranule. Compared to previous studies on iron ore pellets (Farber et al. 2002; Shatokha et al. 2009; Shatokha et al. 2010), this work focuses on imaging prior to sintering. It also uses higher resolution micro-CT and definitely brings a better insight into granulation as compared to data from 2D imaging of polished blocks: less artefacts in apparent porosity due to sample preparation; good discrimination among components of the granule; clear identification of the nuclei; etc. This work is part of a larger European project (IMSIMI - Improved Sintering Mix) aiming at an optimal use of challenging input materials through carefully monitored preparation phases (mixing, granulation, etc.) and better understanding of their impact on the sintering process. Farber L., Tardos G., Michaels JN.,2002. Use of X-ray tomograzphy to study the porosity and morphology of granules. Powder Technology vol. 132, p 57-63. Shatokha V., Korobeynikov I., Maire E., Adrien J., 2009. Application of 3D X-ray tomography to investigation of structure of sinter mixture granules. Ironmaking and Steelmaking, vol. 36 (6), p 416-420. Shatokha V., Korobeynikov I., Maire E., Gremillard L., Adrien J.,2010. Iron ore sinter porosity characterisation with application of 3D X-ray tomography. Ironmaking and Steelmaking, vol. 37(5), p313-319. [less ▲]

Detailed reference viewed: 215 (16 ULiège)
Full Text
See detailApplication of X-ray microtomography to investigate the effect of raw material properties on the kinetics of iron ores granulation
Evrard, Maxime ULiege; Contreras, Rafael; Pirard, Eric ULiege

Conference (2014, September)

In modern ironmaking, granulation is the first step of the sintering process. It is typically carried out in continuous drum granulators using water as a binder, and involves multiple components besides ... [more ▼]

In modern ironmaking, granulation is the first step of the sintering process. It is typically carried out in continuous drum granulators using water as a binder, and involves multiple components besides iron ores, such as return fines and other recycled materials (dusts, mill scale, sludges), solid fuel (coke breeze or anthracite) and fluxes (limestone, lime, olivine, dunite or dolomite) (Ball, 1973). As it is necessary to maintain a consistent quality of the granules (size distribution, porosity, strength, etc.) despite of the varying iron ore origins, the question arises as to how the properties of the iron ore particles (size and shape) influence the granulation process. The granulation process is partly influenced by the characteristic of the feed and partly by the action of cohesive force inside the drum granulator (Newitt et al. 1958). The objective of this paper is to study the effect of raw material properties on the kinetics of iron ore granulation considering in particular the mechanisms ruling wet granulation for two iron ores and to know the factors which determine the texture, shape, porosity and mechanical strength of the granules. [less ▲]

Detailed reference viewed: 70 (4 ULiège)
Full Text
See detailApplication of X-ray microtomography to investigate the effect of raw material properties on the kinetics of iron ores granulation
Contreras, Rafael; Evrard, Maxime ULiege; Van loo, Frederic et al

in PSA 2014 Manchester- Abstracts (2014, September)

In modern ironmaking, granulation is the first step of the sintering process. It is typically carried out in continuous drum granulators using water as a binder, and involves multiple components besides ... [more ▼]

In modern ironmaking, granulation is the first step of the sintering process. It is typically carried out in continuous drum granulators using water as a binder, and involves multiple components besides iron ores, such as return fines and other recycled materials (dusts, mill scale, sludges), solid fuel (coke breeze or anthracite) and fluxes (limestone, lime, olivine, dunite or dolomite) (Ball, 1973). As it is necessary to maintain a consistent quality of the granules (size distribution, porosity, strength, etc.) despite of the varying iron ore origins, the question arises as to how the properties of the iron ore particles (size and shape) influence the granulation process. The granulation process is partly influenced by the characteristic of the feed and partly by the action of cohesive force inside the drum granulator (Newitt et al. 1958). The objective of this paper is to study the effect of raw material properties on the kinetics of iron ore granulation considering in particular the mechanisms ruling wet granulation for two iron ores and to know the factors which determine the texture, shape, porosity and mechanical strength of the granules. [less ▲]

Detailed reference viewed: 94 (6 ULiège)
Full Text
See detailPropos sur le Zinc
Pirard, Eric ULiege

Conference given outside the academic context (2014)

Detailed reference viewed: 49 (15 ULiège)