[en] The dispersing phenomenon of silicon nitride suspension has been investigated systematically by measuring surface charge density, sediment volume and turbidity of the suspension. Dolapix A 88 has been used as dispersant to improve the stability of the suspension and assessed through measurement of the specific surface charge of the Si3N4 system. The isoelectric point (iep) of Si3N4 powder has been found to be at pHiep = 6.91 and there was no shift in iep due to presence of dispersant indicating that the interaction between the powder and the dispersant Dolapix A88 is purely physisorbing in nature. Good agreement has been observed between dispersion characteristics, surface charge and streaming potential inflection. The paper also describes the selection and optimisation of the dispersant in controlling stability of an aqueous suspension of Si3N4. It can be concluded from this investigation that the PCD technique for measurement of specific surface charge can be conveniently used for the assessment of dispersibility of ceramic suspension in both dilute as well as in concentrated suspensions
Disciplines :
Materials science & engineering
Author, co-author :
Singh, Bimal
Gaydardzhiev, Stoyan ; Université de Liège - ULiège > Département Argenco : Secteur GeMMe > Traitement et recyclage des matières minérales
Ay, Peter
Language :
English
Title :
Stabilization of aqueous silicon nitride suspension with Dolapix A 88
Bergstrom, L. and Pugh, R. (1989) J. Am. Ceram. Soc., 72(6), pp. 103.
Busca, G. and Lorenzelli, V. and Pocile, G. and Baraton, M. and Quintard, P. and Marchand, R. (1986) Mat. Chem. Phys., 14(3), pp. 123.
Cesarano III, J. and Aksay, I. (1988) J. Am. Ceram. Soc., 71(7), pp. 250.
Hackley, V. (1997) J. Am. Ceram. Soc., 80(9), pp. 2315.
Han, K. and Lim, C. and Hong, M. and Choi, S. and Kwon, S. (1996) J. Am. Ceram. Soc., 79(2), pp. 574.
Janney, M. (2001) Attaining high solids in ceramics slurries. In. Available at: http://www.ms.ornl.gov/researchgroups/process/cpg/ gelcasting.html, 6/8/01
Jean, J. and Wang, J. (1990) J. Am. Ceram. Soc., 81(6), pp. 1589.
Kulig, M. and Orosehin, W. and Griel, P. (1989) J. Eur. Ceram. Soc., 5(6), pp. 209.
Luther, E. and Kramer, T. and Lange, F. and Pearson, D. (1994) J. Am. Ceram. Soc., 77(4), pp. 1047.
Luther, E. and Lang, F. and Person, D. (1995) J. Am. Ceram. Soc., 78(8), pp. 2009.
Nitzsche, R. and Bley, L. (1997) Particle charge detector - a new method to characterize and optimise the processing of ceramics. In Operating Manual. Germany: Herrsching Mütek.
Nitzsche, R. and Friedrich, H. and Boden, G. and Hermel, W. (1987) Electrochemical surface investigation: An important technique for ceramic powder processing. Academy of Sciences, Institute of Solid State Physics and Material Research Dresden. In [pp. 280-291]. AN 6012
Porter, M. (1994) Speciality surfactant. In Handbook of Surfactants 2nd ed. (pp. 277-291). New York: Blackie Academic and Professional.
Pradip. (1988) Trans. Indian Ins. Met., 41(3), pp. 15.
Pugh, R. (1994) Dispersion and stability of ceramic powders in liquids. In Surface and Colloid Chemistry in Advanced Ceramics Processing. (pp. 127-191). New York: Marcel Dekker.
Schwelm, M. (1992) Dispersion of Si3N4 with Y2O3-Al2O3 Sintering Additive in Pressure Casting. In. University of Stuttgart. Ph.D. Diss
Singh, B. and Besra, L. and Bhattacharjee, S. (2002a) Colloids Surf A. Physicochem. Eng. Asp., 204(1).
Singh, B. and Bhattacharjee, S. and Besra, L. (2002b) Ceram. Int., 28(4), pp. 413.
Singh, B. and Bhattacharjee, S. and Besra, L. (2002c) Mater. Lett., 56(5), pp. 475.
Singh, B. and Bhattacharjee, S. and Besra, L. and Sengupta, D. (2004) Ceramic Int., 30(4), pp. 496.
Wang, C. and Riley, F. (1992) J. Eur. Ceram. Soc., 10(3), pp. 83.
Wang, L. and Bindal, I. and Sigmund, W. and Aldinger, F. (1996) Colloidal processing on non-oxide ceramics. In Proceedings of Werkstoffwoche'96, Symposium. In [pp. 611-616].
Wang, L. and Sigmund, W. and Aldinger, F. (2000) J. Am. Ceram. Soc., 83(4), pp. 697.
Ziegler, G. and Henrich, J. and Wotting, G. (1987) J. Mater. Sci., 22(4), pp. 3717.