|Reference : Influence of DMM addition in light fuel oil on the flame emission in a domestic hot wate...|
|Scientific congresses and symposiums : Unpublished conference|
|Engineering, computing & technology : Energy|
|Influence of DMM addition in light fuel oil on the flame emission in a domestic hot water boiler|
|Masy, Cédric [ > > ]|
|Ngendakumana, Philippe [Université de Liège - ULg > Département d'aérospatiale et mécanique > Thermotechnique >]|
|26ème Task Leaders Meeting (TLM) de l' Accord IEA "Energy Conservation and Emissions Reduction in Combustion"|
|du 21 août au 27 août 2004|
|[en] In order to investigate the soot reduction potentialities of DMM (called also methylal) addition in an overall lean diffusion flame, tests have been carried out on our experimental fuel oil boiler whose burner is equipped with a spill-return atomizer.
The tests have been performed in steady state regime without and with addition of DMM. During all the tests, the oxygen at the chimney was kept constant (around 3%) by adjusting the position of the burner air damper and thus the air combustion mass flow rate. The combustion chamber has two quartz windows through which the flame emission was registered by using a photodiode sensible in visible range. Classical gas analysers were used to measure the CO and NOx concentrations at the chimney. DMM percentages up to 15% (by mass) have been tested.
|Région wallonne : Direction générale des Technologies, de la Recherche et de l'Energie - DGTRE|
|Researchers ; Professionals|
There is no file associated with this reference.
All documents in ORBi are protected by a user license.