Azizian, Z.G., Roberts, T.M., (1983) Morris LJ, editor. Proceedings of the international conference on instability and plastic collapse of steel structures, pp. 392-398. , London: Granada Publishing
Betten, J., Shin, C.H., Elasto-plastic buckling analysis of rectangular plates subjected to biaxial loads (2000) Forsch Ingenieurwes., 65, pp. 273-278
Brazier, L.G., On the flexure of thin cylindrical shells and other “thin” sections (1927) Proc R Soc Lond A., 116, pp. 104-114
Brown, C.J., Yettram, A.L., The elastic stability of square perforated plates under combinations of bending, shear and direct load (1986) Thin-Walled Struct, 4, pp. 239-246
Dimopoulos, C.A., Gantes, C.J., Experimental investigation of buckling of wind turbine tower cylindrical shells with opening and stiffening under bending (2012) Thin-Walled Struct., 54, pp. 140-155
Dimopoulos, C.A., Gantes, C.J., (2013) Comparison of stiffening types of the cutout in tubular wind turbine towers. Jurnal of Constructional Steel research, 83, pp. 62-74
Dimopoulos, C.A., Gantes, C.J., Numerical methods for the design of cylindrical steel shells with unreinforced or reinforced cutouts (2015) Thin-Walled Structures, 96, pp. 11-28
Dimopoulos, C.A., Koulatsou, K., Petrini, F., Gantes, C.J., Assessment of stiffening type of the cutout in tubular wind turbine towers under artificial dynamic wind actions (2015) Journal of computational and nonlinear dynamics. 10.
(1990) Stahlbauten: Stabilitätsfälle, Schalenbeulen [Steel structure-Part 4: Stability - Safety against buckling of shells, German Institute for Standardization], , Berlin: Beuth Verlag
(2013) Design of offshore wind turbine structures, Report No.: DNV-OS-J101, , Oslo: Norway): Det Norske Veritas
(2013) Buckling strength of shells, DNV-RP-C202, , Oslo:: Det Norske Veritas
Durban, D., Zuckerman, Z., Elasto-plastic buckling of rectangular plates in biaxial compression/tension (1999) Int J Mech Sci, 41, pp. 751-765
(1980) Technical committee 8, structural stability, TWG 8.4-Shells, buckling of steel shells, , 1st ed, European Design Recommendations
El-Sawy, K.M., Nazmy, A.S., Martini, M.I., Elasto-plastic buckling of perforated plates under uniaxial compression (2004) Thin-Walled Struct, 42, pp. 1083-1101
European committee for standardization, Eurocode 3: design of steel structures, Part 1–6 (2006) Strength Stability Shell Struct
Fabian, O., Collapse of cylindrical, elastic tubes under combined bending, pressure and axial loads (1977) Int J Solids Struct, 13, pp. 1257-1270
Gellin, S., The plastic buckling of long cylindrical shell under pure bending (1980) Int J Solids Struct, 16, pp. 397-407
Ghanbari Ghazijahani, T., Jiao, H., Holloway, D., Structural behaviour of shells with different cutouts under compression: an experimental study (2015) J Const Steel Res, 105, pp. 129-137
Guo, L., Yang, S., Jiao, H., Behaviour of thin-walled circular hollow section tubes subjected to bending (2013) Thin-Walled Struct, 73, pp. 281-289
Han, H., Cheng, J., Taheri, F., Pegg, N., Numerical and experimental investigations of the response of aluminum cylinders with a cutout subject to axial compression (2006) Thin-Walled Struct., 44, pp. 254-270
Ju, G.T., Kyriakides, S., Bifurcation and localization instabilities in cylindrical shells under bending II. Predictions (1992) Int J Solids Struct, 29, pp. 1143-1171
Jullien, J., Limam, A., Effects of openings of the buckling of cylindrical shells subjected to axial compression (1998) Thin-Walled Struct, 31, pp. 187-202
Kim, U.N., Choe, I.H., Paik, J.K., Buckling and ultimate strength of perforated plate panels subject to axial compression: experimental and numerical investigations with design formulations (2009) Ships Offshore Struct, 4, pp. 337-361
Kyriakides, S., Ju, G.T., Bifurcation and localization instabilities in cylindrical shells under bending. I. Experiments (1992) Int J Solids Struct, 29, pp. 1117-1142
Lee, S.E., Paik, J.K., Ha, Y.C., Kim, B.J., Seo, J.K., An efficient design methodology for subsea manifold piping systems based on parametric studies (2014) Ocean Eng, 84, pp. 273-282
Paik, J.K., Ultimate strength of steel plates with a single circular hole under axial compressive loading along short edges (2007) Ships Offshore Struct, 2, pp. 355-360
Reissner, E., On finite pure bending of cylindrical tubes (1961) Österreichisches Ingenieur-Archiv, 15, pp. 165-172
Sabir, A.B., Chow, F.Y., Elastic buckling of flat panels containing circular and square holes (1983) Proceedings of the International Conference on Instability and Plastic Collapse of Steel Structures, pp. 311-321. , London, UK:: Granada Publishing
Sahin, S., (2016) Wind turbine tower structures analysis according to wind load in terms of cost [thesis], , Szczecin: University of Liege
Schenk, C.A., Schuёller, G.I., Buckling analysis of cylindrical shells with cutouts including random boundary and geometric imperfections (2007) Comput Method Appl Mech Eng, 196, pp. 3424-3434
Seide, P., Weingarten, V.I., On the buckling of circular cylindrical shells under pure bending (1961) J Appl Mech., 28, pp. 112-116
Shangmugam, N.E., Thevendran, V., Tan, Y.H., Design formula for axially compressed perforated plates (1999) Thin-Walled Struct., 34, pp. 1-20
Shariati, M., Rokhi, M.M., Numerical and experimental investigations on buckling of steel cylindrical shells with elliptical cutout subject to axial compression (2008) Thin-Walled Struct., 46, pp. 1251-1261
Shariati, M., Rokhi, M.M., Buckling of steel cylindrical shells with an elliptical cutout (2010) Int J Steel Struct, 10, pp. 193-205
Sherman, D.R., Tests of circular steel tubes in bending (1976) ASCE J Struct Div, 102, pp. 2181-2195
Tennyson, R.C., The effects of unreinforced circular cutouts on the buckling of circular cylindrical shells under axial compression (1968) J Eng Ind, 90, pp. 541-546
Wang, G., Sun, H., Peng, H., Uemori, R., Buckling and ultimate strength of plates with openings (2009) Ships Offshore Struct., 4, pp. 43-53
Yeh, M.K., Lin, M.C., Wu, W.T., Bending buckling of an elasto-plastic cylindrical shell with a cutout (1999) Eng Struct., 21, pp. 996-1005