[1] Armand, G., Noiret, A., Zghondi, J., Seyedi, D.M., Short- and long-term behaviors of drifts in the Callovo-Oxfordian claystone at the Meuse/Haute-Marne underground research laboratory. J Rock Mech Geotech Eng 5:3 (2013), 221–230.
[2] Armand, G., Leveau, F., Nussbaum, C., de La Vaissiere, R., Noiret, A., Jaeggi, D., et al. Geometry and properties of the excavation-induced fractures at the Meuse/Haute-Marne URL drifts. Rock Mech Rock Eng 47:1 (2014), 21–41.
[3] Pardoen, B., Levasseur, S., Collin, F., Using local second gradient model and shear strain localisation to model the excavation damaged zone in unsaturated claystone. Rock Mech Rock Eng 48:2 (2015), 691–714, 10.1007/s00603-014-0580-2.
[4] Desrues, J., Viggiani, G., Strain localization in sand: an overview of the experimental results obtained in Grenoble using stereophotogrammetry. Int J Numer Anal Meth Geomech 28:4 (2004), 279–321.
[6] Charlier R. Approche unifiée de quelques problèmes non linéaires de mécanique des milieux continus par la méthode des éléments finis (grandes déformations des métaux et des sols, contact unilatéral de solides, conduction thermique et écoulements en milieu poreux), Ph.D. thesis. Belgium: Faculté des Sciences Appliquées, Université de Liège; 1987.
[7] Biot, M.A., General theory for three-dimensional consolidation. J Appl Phys 12:2 (1941), 155–164.
[8] van Genuchten, M.T., A closed-form equation for predicting the hydraulic conductivity of unsaturated soils. Soil Sci Soc Am J 44:5 (1980), 892–898.
[9] Collin, F., Pardoen, B., Excavation damaged zone modelling in claystone with coupled second gradient model. Yang, Q., Zhang, J.M., Zheng, H., Yao, Y., (eds.) Constitutive modeling of geomaterials Springer series in geomechanics and geoengineering, 2013, Springer, Berlin Heidelberg, 313–317, 10.1007/978-3-642-32814-5_42.
[10] Pardoen, B., Levasseur, S., Collin, F., Using shear strain localisation to model the fracturing around gallery in unsaturated Callovo-Oxfordian claystone. Chau, K.T., Zhao, J., (eds.) Bifurcation and degradation of geomaterials in the new millennium Springer series in geomechanics and geoengineering, 2015, Springer, 285–291, 10.1007/978-3-319-13506-9_41.
[11] Collin, F., Levasseur, S., Chambon, R., Numerical post failure methods in multiphysical problems. Eur J Environ Civ Eng 13:7–8 (2009), 983–1004.
[12] Toupin, R., Elastic materials with couple-stresses. Arch Ration Mech An 11:1 (1962), 385–414.
[13] Mindlin, R.D., Micro-structure in linear elasticity. Arch Ration Mech An 16:1 (1964), 51–78.
[14] Chambon, R., Caillerie, D., Matsushima, T., Plastic continuum with microstructure, local second gradient theories for geomaterials: localization studies. Int J Solids Struct 38:46–47 (2001), 8503–8527.
[15] Collin, F., Chambon, R., Charlier, R., A finite element method for poro mechanical modelling of geotechnical problems using local second gradient models. Int J Numer Meth Eng 65:11 (2006), 1749–1772.
[16] Ehlers, W., Volk, W., On theoretical and numerical methods in the theory of porous media based on polar and non-polar elasto-plastic solid materials. Int J Solids Struct 35:34–35 (1998), 4597–4617.
[17] Love, A.E.H., A treatise on the mathematical theory of elasticity. 4th ed., 1927, Cambridge University Press.
[18] Graham, J., Houlsby, G.T., Anisotropic elasticity of a natural clay. Géotechnique 33:2 (1983), 165–180.
[19] Cheng, A.H.D., Material coefficients of anisotropic poroelasticity. Int J Rock Mech Min Sci 34:2 (1997), 199–205.
[20] Van Eekelen, H.A.M., Isotropic yield surfaces in three dimensions for use in soil mechanics. Int J Numer Anal Meth Geomech 4:1 (1980), 98–101.
[21] Barnichon JD. Finite Element Modelling in Structural and Petroleum Geology, Ph.D. thesis. Faculté des Sciences Appliquées, Université de Liège, Belgium; 1998.
[23] Pietruszczak, S., Pande, G.N., Description of soil anisotropy based on multi-laminate framework. Int J Numer Anal Meth Geomech 25:2 (2001), 197–206.
[24] Pietruszczak, S., Lydzba, D., Shao, J.F., Modelling of inherent anisotropy in sedimentary rocks. Int J Solids Struct 39:3 (2002), 637–648.
[25] Pietruszczak, S., Fundamentals of plasticity in geomechanics. 2010, CRC Press/Balkema, Leiden (The Netherlands) [Ch. 7, Description of inherent anisotropy in geomaterials. p. 133–56].
[26] Pietruszczak, S., Mroz, Z., Formulation of anisotropic failure criteria incorporating a microstructure tensor. Comput Geotech 26 (2000), 105–112.
[27] Shao, J.F., Zhu, Q.Z., Su, K., Modeling of creep in rock materials in terms of material degradation. Comput Geotech 30:7 (2003), 549–555.
[28] Shao, J.F., Chau, K.T., Feng, X.T., Modeling of anisotropic damage and creep deformation in brittle rocks. Int J Rock Mech Min Sci 43:4 (2006), 582–592.
[29] Perzyna, P., Fundamental problems in viscoplasticity. Adv Appl Mech 9 (1966), 243–377.
[30] Jia, Y., Bian, H.B., Duveau, G., Su, K., Shao, J.F., Hydromechanical modelling of shaft excavation in Meuse/Haute-Marne laboratory. Phys Chem Earth 33 (2008), S422–S435.
[31] Zhou, H., Jia, Y., Shao, J.F., A unified elastic–plastic and viscoplastic damage model for quasi-brittle rocks. Int J Rock Mech Min Sci 45:8 (2008), 1237–1251.
[32] Mindlin, R.D., Second gradient of strain and surface-tension in linear elasticity. Int J Solids Struct 1 (1965), 417–438.
[33] Matsushima, T., Chambon, R., Caillerie, D., Large strain finite element analysis of a local second gradient model: application to localization. Int J Numer Meth Eng 54:4 (2002), 499–521.
[34] Chambon, R., Caillerie, D., Hassan, N.E., One-dimensional localisation studied with a second grade model. Eur J Mech A-Solid 17:4 (1998), 637–656.
[35] Collin, F., Caillerie, D., Chambon, R., Analytical solutions for the thick-walled cylinder problem modeled with an isotropic elastic second gradient constitutive equation. Int J Solids Struct 46:22–23 (2009), 3927–3937.
[36] Bésuelle, P., Chambon, R., Collin, F., Switching deformation modes in post-localization solutions with a quasibrittle material. J Mech Mater Struct 1:7 (2006), 1115–1134.
[37] Charlier, R., Collin, F., Pardoen, B., Talandier, J., Radu, J.P., Gerard, P., An unsaturated hydro-mechanical modelling of two in-situ experiments in Callovo-Oxfordian argillite. Eng Geol 165 (2013), 46–63.
[38] Dossier Andra. Référentiel du site Meuse/Haute-Marne tome 2: Caractérisation comportementale du milieu géologique sous perturbation, Seconde édition. Paris (France); 2005.
[39] Charlier R, Radu JP, Collin F. Projet HAVL – Argile – Expertise sur les mesures sur échantillons d'argilite du module de déformation et de la résistance à la compression simple, Tech. Rep. C.RP.0ULg.08.001. Andra: Université de Liège; 2008.
[40] Pardoen B. Hydro-mechanical analysis of the fracturing induced by the excavation of nuclear waste repository galleries using shear banding, Ph.D. thesis. Faculté des Sciences Appliquées, Université de Liège (Belgium); 2015.
[41] Panet, M., Guenot, A., Analysis of convergence behind the face of a tunnel. Proceedings of the 3rd international symposium: tunnelling 82, 1982, Institution of Mining and Metallurgy, Brighton, 197–204.
[42] Pardoen, B., Talandier, J., Collin, F., Permeability evolution and water transfer in the excavation damaged zone of a ventilated gallery. Int J Rock Mech Min Sci 85 (2016), 192–208, 10.1016/j.ijrmms.2016.03.007.
[43] Pardoen, B., Levasseur, S., Collin, F., Excavation damaged zone modelling including hydraulic permeability evolution in unsaturated argilaceous rock. Khalili, N., Russell, A.R., Khoshghalb, A., (eds.) Unsaturated soils: research and applications, 2014, CRC Press, London, 1387–1393, 10.1201/b17034-203.