Macro- and near-mesoporous monoliths by medium internal phase emulsion polymerization: a systematic study

[en] The synthesis of a series of poly(ethylene oxide)-b-polystyrene copolymers with different block lengths was performed by radical addition fragmentation chain transfer. These amphiphilic copolymers were tested as stabilizers for water-in-oil medium internal phase emulsion (MIPE) templating polymerization and the formation of polyMIPEs with controlled morphology. Aside from the structure of the emulsion stabilizer, several parameters susceptible to influence the size of the cavities and the interconnectivity of the porous monoliths were probed including the choice of the comonomers, treatment of the emulsion by ultrasound, the use of controlled radical polymerization method for the network formation as well as interfacial initiation. Interconnected cellular monoliths were produced. The polymerization of the ultrasonicated water-in-ethylhexylacrylate/divinylbenzene MIPE notably led to near-mesoporous open-cell material. Mechanical properties and specific surface areas of the polyMIPEs were also investigated and discussed.

Research center :

Center for Education and Research on Macromolecules (CERM)
CESAM - Complex and Entangled Systems from Atoms to Materials - ULiège

Disciplines :

Chemistry
Materials science & engineering

Author, co-author :

Mathieu, Kevin ; University of Liège - ULiège > Department of Chemistry > Center for Education and Research on Macromolecules (CERM)

Jérôme, Christine ; University of Liège - ULiège > Department of Chemistry > Center for Education and Research on Macromolecules (CERM)

Debuigne, Antoine ; University of Liège - ULiège > Department of Chemistry > Center for Education and Research on Macromolecules (CERM)

Language :

English

Title :

Macro- and near-mesoporous monoliths by medium internal phase emulsion polymerization: a systematic study

Publication date :

02 September 2016

Journal title :

Polymer

ISSN :

0032-3861

eISSN :

1873-2291

Publisher :

Elsevier Science, Oxford, United Kingdom

Volume :

Pages :

157-165

Peer reviewed :

Peer Reviewed verified by ORBi

Funders :

F.R.S.-FNRS - Fonds de la Recherche Scientifique [BE]
BELSPO - SPP Politique scientifique - Service Public Fédéral de Programmation Politique scientifique

Available on ORBi :

since 17 August 2016

Statistics

Number of views

72 (22 by ULiège)

Number of downloads

1 (1 by ULiège)

More statistics

Scopus citations^®

Scopus citations^®
without self-citations

OpenCitations

Bibliography

[1] Zhang, H., Cooper, A.I., Synthesis and applications of emulsion-templated porous materials. Soft Matter 1:2 (2005), 107–113.
[2] Silverstein, M.S., PolyHIPEs: recent advances in emulsion-templated porous polymers. Prog. Polym. Sci. 39:1 (2014), 199–234.
[3] Silverstein, M.S., Emulsion-templated porous polymers: a retrospective perspective. Polymer 55:1 (2014), 304–320.
[4] Krajnc, P., Leber, N., Štefanec, D., Kontrec, S., Podgornik, A., Preparation and characterisation of poly(high internal phase emulsion) methacrylate monoliths and their application as separation media. J. Chromatogr. A 1065:1 (2005), 69–73.
[5] Svec, F., Huber, C.G., Monolithic materials: promises, challenges, achievements. Anal. Chem. 78:7 (2006), 2100–2107.
[6] Brown, J.F., Krajnc, P., Cameron, N.R., PolyHIPE supports in batch and flow-through suzuki cross-coupling reactions. Ind. Eng. Chem. Res. 44:23 (2005), 8565–8572.
[7] Pierre, S.J., Thies, J.C., Dureault, A., Cameron, N.R., Van Hest, J.C.M., Carette, N., et al. Covalent enzyme immobilization onto photopolymerized highly porous monoliths. Adv. Mater 18:14 (2006), 1822–1826.
[8] Pulko, I., Kolar, M., Krajnc, P., Atrazine removal by covalent bonding to piperazine functionalized PolyHIPEs. Sci. Total Environ. 386:1 (2007), 114–123.
[9] Zhu, Y., Zheng, Y., Wang, F., Wang, A., Monolithic supermacroporous hydrogel prepared from high internal phase emulsions (HIPEs) for fast removal of Cu2+ and Pb2+. Chem. Eng. J. 284 (2016), 422–430.
[10] Busby, W., Cameron, N.R., Jahoda, C.A.B., Emulsion-derived foams (PolyHIPEs) containing poly(caprolactone) as matrixes for tissue engineering. Biomacromolecules 2:1 (2001), 154–164.
[11] Busby, W., Cameron, N.R., Jahoda, C.A.B., Tissue engineering matrixes by emulsion templating. Polym. Int. 51:10 (2002), 871–881.
[12] Gokmen, M.T., Van Camp, W., Colver, P.J., Bon, S.A.F., Du Prez, F.E., Fabrication of porous clickable polymer beads and rods through generation of high internal phase emulsion (HIPE) droplets in a simple microfluidic device. Macromolecules 42:23 (2009), 9289–9294.
[13] Kimmins, S.D., Cameron, N.R., Functional porous polymers by emulsion templating: recent advances. Adv. Funct. Mater 21:2 (2011), 211–225.
[14] Pulko, I., Krajnc, P., High internal phase emulsion templating–a path to hierarchically porous functional polymers. Macromol. Rapid Commun. 33:20 (2012), 1731–1746.
[15] Cameron, N.R., Sherrington, D.C., Albiston, L., Gregory, D.P., Study of the formation of the open-cellular morphology of poly(styrene/divinylbenzene) polyHIPE materials by cryo-SEM. Colloid Polym. Sci. 274:6 (1996), 592–595.
[16] Menner, A., Bismarck, A., New evidence for the mechanism of the pore formation in polymerising high internal phase emulsions or why polyHIPEs have an interconnected pore network structure. Macromol. Symp. 242:1 (2006), 19–24.
[17] Gibson, L.J., Ashby, M.F., Cellular Solids Structure and Properties. second ed., 1999, Cambridge University Press, Cambridge.
[18] Menner, A., Salgueiro, M., Shaffer, M.S.P., Bismarck, A., Nanocomposite foams obtained by polymerization of high internal phase emulsions. J. Polym. Sci. Part A Polym. Chem. 46:16 (2008), 5708–5714.
[19] Hus, S., Krajnc, P., PolyHIPEs from methyl methacrylate : hierarchically structured microcellular polymers with exceptional mechanical properties. Polymer 55:17 (2014), 4420–4424.
[20] Jiang, Q., Menner, A., Bismarck, A., Robust macroporous polymers: using polyurethane diacrylate as property defining crosslinker. Polymer 97 (2016), 598–603.
[21] Menner, A., Powell, R., Bismarck, A., Open porous polymer foams via inverse emulsion polymerization: should the definition of high internal phase (ratio) emulsions be extended ?. Macromolecules 39:6 (2006), 2034–2035.
[22] Manley, S.S., Graeber, N., Grof, Z., Menner, A., Hewitt, G.F., Stepanek, F., et al. New insights into the relationship between internal phase level of emulsion templates and gas–liquid permeability of interconnected macroporous polymers. Soft Matter 5:23 (2009), 4780–4787.
[23] Ikem, V.O., Menner, A., Bismarck, A., High-porosity macroporous polymers synthesized from titania-particle- stabilized medium and high internal phase emulsions. Langmuir 26:11 (2010), 8836–8841.
[24] Berber, E., Cira, F., Mert, E.H., Preparation of porous polyester composites via emulsion templating: investigation of the morphological, mechanical, and thermal properties. Polym. Compos 37:5 (2016), 1531–1538.
[25] Tebboth, M., Jiang, Q., Kogelbauer, A., Bismarck, A., Inflatable elastomeric macroporous polymers synthesized from medium internal phase emulsion templates. ACS Appl. Mater. Interfaces 7:34 (2015), 19243–19250.
[26] Menner, A., Verdejo, R., Shaffer, M., Bismarck, A., Particle-stabilized surfactant-free medium internal phase emulsions as templates for porous nanocomposite materials: poly-pickering-foams. Langmuir 23:5 (2007), 2398–2403.
[27] Ikem, V.O., Menner, A., Horozov, T.S., Bismarck, A., Highly permeable macroporous polymers synthesized from pickering medium and high internal phase emulsion templates. Adv. Mater 22:32 (2010), 3588–3592.
[28] Wu, R., Menner, A., Bismarck, A., Tough interconnected polymerized medium and high internal phase emulsions reinforced by silica particles. J. Polym. Sci. Part A Polym. Chem. 48:9 (2010), 1979–1989.
[29] Ikem, V.O., Menner, A., Bismarck, A., Tailoring the mechanical performance of highly permeable macroporous polymers synthesized via Pickering emulsion templating. Soft Matter 7:14 (2011), 6571–6577.
[30] Kovačič, S., Jeřábek, K., Krajnc, P., Slugovc, C., Ring opening metathesis polymerisation of emulsion templated dicyclopentadiene giving open porous materials with excellent mechanical properties. Polym. Chem. 3:2 (2012), 325–328.
[31] Wu, R., Menner, A., Bismarck, A., Macroporous polymers made from medium internal phase emulsion templates: effect of emulsion formulation on the pore structure of polyMIPEs. Polymer 54:21 (2013), 5511–5517.
[32] Moglia, R.S., Robinson, J.L., Muschenborn, A.D., Touchet, T.J., Maitland, D.J., Cosgriff-Hernandez, E., Injectable polyMIPE scaffolds for soft tissue regeneration. Polymer 55:1 (2014), 426–434.
[33] Luo, Y., Wang, A.-N., Gao, X., Miniemulsion template polymerization to prepare a sub-micrometer porous polymeric monolith with an inter-connected structure and very high mechanical strength. Soft Matter 8:29 (2012), 7547–7551.
[34] Mespouille, L., Hedrick, J.L., Dubois, P., Expanding the role of chemistry to produce new amphiphilic polymer (co)networks. Soft Matter 5:24 (2009), 4878–4892.
[35] Luo, Y., Wang, A.-N., Gao, X., Pushing the mechanical strength of PolyHIPEs up to the theoretical limit through living radical polymerization. Soft Matter 8:6 (2012), 1824–1830.
[36] Luo, Y., Wang, A.-N., Gao, X., One-pot interfacial polymerization to prepare PolyHIPEs with functional surface. Colloid Polym. Sci. 293:6 (2015), 1767–1779.
[37] Mathieu, K., Jérôme, C., Debuigne, A., Influence of the macromolecular surfactant features and reactivity on morphology and surface properties of emulsion-templated porous polymers. Macromolecules 48:18 (2015), 6489–6498.
[38] Chen, M., Moad, G., Rizzardo, E., Thiocarbonylthio end group removal from RAFT-synthesized polymers by a radical-induced process. J. Polym. Sci. Part A Polym. Chem. 47:23 (2009), 6704–6714.
[39] Alaimo, D., Beigbeder, A., Dubois, P., Broze, G., Jérôme, C., Grignard, B., Block, random and palm-tree amphiphilic fluorinated copolymers: controlled synthesis, surface activity and use as dispersion polymerization stabilizers. Polym. Chem. 5:18 (2014), 5273–5282.
[40] Washburn, E.W., The dynamics of capillary flow. Phys. Rev. 17:3 (1921), 273–283.
[41] Brunauer, S., Emmett, P.H., Teller, E., Adsorption of gases in multimolecular layers. J. Am. Chem. Soc. 60:2 (1938), 309–319.
[42] Cameron, N.R., Sherrington, D.C., Preparation and glass transition temperatures of elastomeric PolyHIPE materials. J. Mater. Chem. 7:11 (1997), 2209–2212.
[43] Tai, H., Sergienko, A., Silverstein, M.S., High internal phase emulsion foams:copolymers and interpenetrating polymer networks. Polym. Eng. Sci. 41:9 (2001), 1540–1552.