Reference : European design recommendations for simple joints in steel structures
Books : Book published as author, translator, etc.
Engineering, computing & technology : Civil engineering
http://hdl.handle.net/2268/19647
European design recommendations for simple joints in steel structures
English
[fr] Recommandations Européennes pour le dimensionnement d'assemblages articulés dans les structures métalliques
Jaspart, Jean-Pierre mailto [Université de Liège - ULg > Département Argenco : Secteur MS2F > Adéquat. struct. aux exig. de fonct.& perfor. techn.-écon. >]
Demonceau, Jean-François mailto [Université de Liège - ULg > Département ArGEnCo > Département ArGEnCo >]
Renkin, S. [ > > ]
Guillaume, M. L. [ > > ]
2009
ECCS (European Convention for Constructional Steelwork)
Publication n°126, 1° edition
90
92-9147-000-95
Bruxelles
Belgium
[en] Simple joint ; design recommendation
[en] This document intends to provide European recommendations for the design of simple
joints in steel structures.
Eurocode 3 Part 1-8 “Design of Connections” gives precise guidelines for the design of
structural joints aimed at transferring bending moments. But for simple joints, information is
only provided in Eurocode 3 for some specific failure modes. The way on how internal forces
distribute amongst the various components within the joints is also not explicitly described.
The present publication fills this gap by proposing practical guidelines for the design of
simple joints commonly used in Europe. The design rules presented in this document are in
full agreement with the principles of Eurocode 3, and in particular of Eurocode 3 Part 1-8.
This document has been prepared at Liège University, editorially checked by Prof. D.
Anderson from Warwick University and approved by the Technical Committee TC10.
http://hdl.handle.net/2268/19647

There is no file associated with this reference.

Bookmark and Share SFX Query

All documents in ORBi are protected by a user license.