N. Yazdi, F. Ayazi, and K. Najafi, "Micromachined inertial sensors," Proc. IEEE, vol. 86, no. 8, pp. 1640-1659, Aug. 1998.
H. Xie and G. Feder, "Integrated microelectromechanical gyroscopes," J. Aerosp. Eng., vol. 16, no. 2, pp. 65-75, Apr. 2003. (Pubitemid 40265228)
R. Neul, U.-M. Gomez, K. Kehr, W. Bauer, J. Classen, C. Doring, E. Esch, S. Gotz, J. Hauer, B. Kuhlmann, C. Lang, M. Veith, and R. Willig, "Micromachined angular rate sensors for automotive application," IEEE Sensors J., vol. 7, no. 2, pp. 302-309, Feb. 2007.
S. H. Kim, J. Y. Lee, C. H. Kim, and Y. K. Kim, "A bulk-micromachined single crystal silicon gyroscope operating at atmospheric pressure," in Proc. 13th IEEE Int. Conf. Solid-State Sens., Actuators, Microsyst., vol. 1. Jun. 2001, pp. 476-479.
J. Cui, X. Z. Chi, H. T. Ding, L. T. Lin, Z. C. Yang, and G. Z. Yan, "Transient response and stability of the AGC-PI closed-loop controlled MEMS vibratory gyroscopes," J. Micromech. Microeng., vol. 19, no. 12, pp. 1-17, Dec. 2009.
B. Eminoglu, S. E. Alper, and T. Akin, "An optimized analog drive-mode controller for vibratory MEMS gyroscope," in Proc. 25th Eurosens., vol. 25. 2011, pp. 1309-1312.
R. Oboe, R. Antonello, E. Lasalandra, G. S. Durante, and L. Prandi, "Control of a Z-axis MEMS vibrational gyroscope," IEEE/ASME Trans. Mechatron., vol. 10, no. 4, pp. 364-370, Aug. 2005. (Pubitemid 41489315)
B. Yang, B. Zhou, and S. Wang, "A precision closed-loop driving scheme of silicon micromachined vibratory gyroscope," J. Phys., Conf. Ser., vol. 34, no. 1, pp. 57-64, 2006. (Pubitemid 43812403)
R. T. M'Closkey and A. Vakakis, "Analysis of a microsensor automatic gain control loop," in Proc. Amer. Control Conf., Jun. 1999, pp. 3307-3311. (Pubitemid 32079373)
R. T. M'Closkey, A. Vakakis, and R. Gutierrez, "Mode localization induced by a nonlinear control loop," Nonlinear Dyn., vol. 25, nos. 1-3, pp. 221-236, Jul. 2001. (Pubitemid 34061103)
Y. C. Chen, R. T. M'Closkey, T. A. Tran, and B. Blaes, "A control and signal processing integrated circuit for the JPL-boeing micromachined gyroscopes," IEEE Trans. Control Syst. Technol., vol. 13, no. 2, pp. 286-300, Mar. 2005. (Pubitemid 40377503)
D. J. Kim and R. T. M'Closkey, "Real-time tuning of JPL-boeing MEMS gyro dynamics," in Proc. Amer. Control Conf., Jun. 2005, pp. 3598-3603. (Pubitemid 41196376)
W. T. Sung, S. Sung, J. Y. Lee, T. Kang, Y. J. Lee, and J. G. Lee, "Development of a lateral velocity-controlled MEMS vibratory gyroscope and its performance test," J. Micromech. Microeng., vol. 18, no. 5, pp. 1-17, May 2008.
V. P. Petkov and B. E. Boser, "A fourth-order σδM interface for micromachined inertial sensors," IEEE J. Solid-State Circuits, vol. 40, no. 8, pp. 1602-1609, Aug. 2005. (Pubitemid 41118753)
V. P. Petkov and B. E. Boser, "High-order electromechanical σδM modulation in micromachined inertial sensors," IEEE Trans. Circuits Syst. I, Reg. Papers, vol. 53, no. 5, pp. 1016-1022, May 2006.
J. Raman, E. Cretu, P. Rombouts, and L. Weyten, "A digitally controlled MEMS gyroscope with unconstrained sigma-delta force-feedback architecture," in Proc. 19th IEEE Annu. Int. Conf. Micro Electro Mech. Syst., 2006, pp. 710-713. (Pubitemid 44592392)
J. Raman, E. Cretu, P. Rombouts, and L. Weyten, "A closed-loop digitally controlled MEMS gyroscope with unconstrained sigma-delta force-feedback," IEEE Sensors J., vol. 9, no. 3, pp. 297-305, Mar. 2009.
H. Rodjegard, D. Sandstrom, P. Pelin, N. Hedenstierna, D. Eckerbert, and G. I. Andersson, "A digitally controlled MEMS gyroscope with 3.2 deg/Hr stability," in Proc. 13th Int. Conf. Solid-State Sens., Actuators, Microsyst., vol. 1. Jun. 2005, pp. 535-538. (Pubitemid 41538541)
Y. Dong, M. Kraft, and W. Redman-White, "High order band-pass sigma delta interfaces for vibratory gyroscopes," in Proc. 4th IEEE Conf. Sensors, Nov. 2005, pp. 1080-1083.
Y. Dong, M. Kraft, and W. Redman-White, "Micromachined vibratory gyroscopes controlled by a high-order band-pass sigma-delta modulator," IEEE Sensors J., vol. 7, no. 1, pp. 59-69, Jan. 2007. (Pubitemid 46113467)
Y. Dong, M. Kraft, and W. Redman-White, "High order noise shaping filters for high performance inertial sensors," IEEE Trans. Instrum. Meas., vol. 56, no. 5, pp. 1666-1674, Oct. 2007.
H. Ding, Z. Yang, G. Yan, M. Kraft, and R. Wilcock, "MEMS gyroscope control system using a band-pass continuous-time sigma-delta modulator," in Proc. 9th IEEE Conf. Sensors, Jul. 2010, pp. 868-872.
J. Luo, H. Ding, and M. Kraft, "A new design methodology for electromechanical sigma-delta modulators," in Proc. 4th IEEE Int. Conf. Nano Micro Eng. Molecular Syst., Jan. 2009, pp. 881-884.
F. Chen, H. Chang, W. Yuan, R. Wilcock, and M. Kraft, "Parameter optimization for a high-order band-pass continuous-time sigma-delta modulator MEMS gyroscope using a genetic algorithm approach," J. Micromech. Microeng., vol. 22, no. 10, p. 105006, Oct. 2012.
H. Chang, Y. Zhang, J. Xie, Z. Zhou, and W. Yuan, "Integrated behavior simulation and verification for a MEMS vibratory gyroscope using parametric model order reduction," J. Microelectromech. Syst., vol. 19, no. 2, pp. 282-293, Apr. 2010.
H. Chang, J. Xie, Q. Fu, Q. Shen, and W. Yuan, "Micromachined inertial measurement unit fabricated by a SOI process with selective roughening under structures," Micro Nano Lett., vol. 6, no. 7, pp. 486-489, Jul. 2011.
R. Maurino and P. Mole, "A 200-MHz IF 11-bit fourth-order bandpass sigma-delta ADC in SiGe," IEEE J. Solid-State Circuits, vol. 35, no. 7, pp. 959-967, Jul. 2000.
J. Lota, M. Al-Janabi, and I. Kale, "Nonlinear-stability analysis of higher orderδ - σ modulators for DC and sinusoidal inputs," IEEE Trans. Instrum. Meas., vol. 57, no. 3, pp. 530-542, Mar. 2008. (Pubitemid 351359245)
Y. Dong, M. Kraft, and W. Redman-White, "Force feedback linearization for higher-order electromechanical sigma-delta modulators," J. Micromech. Microeng., vol. 16, no. 6, pp. 54-60, Jun. 2006.
R. Wilcock and M. Kraft, "Genetic algorithm for the design of electromechanical sigma delta modulator MEMS sensors," J. Sensors, vol. 11, no. 10, pp. 9217-9238, Sep. 2011.
J. C. Lotters, W. Olthuis, P. H. Veltink, and P. Bergveld, "A sensitive differential capacitance to voltage converter for sensor applications," IEEE Trans. Instrum. Meas., vol. 48, no. 1, pp. 89-96, Feb. 1999.
J. A. Cherry and W. M. Snelgrove, "Excess loop delay in continuoustime delta-sigma modulators," IEEE Trans. Circuits Syst. II, Analog Digit. Signal Process., vol. 46, no. 4, pp. 376-389, Apr. 1999.
J. A. Cherry and W. M. Snelgrove, "Clock jitter and quantizer metastability in continuous-time delta-sigma modulators," IEEE Trans. Circuits Syst. II, Analog Digit. Signal Process., vol. 46, no. 6, pp. 661-676, Jun. 1999.
A. Sharma, M. F. Zaman, and F. Ayazi, "A sub-0.2°/hr bias drift micromechanical silicon gyroscope with automatic CMOS mode-matching," IEEE J. Solid-State Circuits, vol. 44, no. 5, pp. 1593-1608, May 2009.
S. E. Alper, Y. Temiz, and T. Akin, "A compact angular rate sensor system using a fully decoupled silicon-on-glass MEMS gyroscope," J. Microelectromech. Syst., vol. 17, no. 6, pp. 1418-1429, Dec. 2008.
S. Sonmezoglu, S. E. Alper, and T. Akin, "An automatically modematched MEMS gyroscope with 50 Hz bandwidth," in Proc. 25th IEEE Annu. Int. Conf. Micro Electro Mech. Syst., Feb. 2012, pp.523-526.
S.E. Alper, K. Azgin, T. Akin, "A high-performance silicon-on-insulator MEMS gyroscope operating at atmospheric pressure," Sens. Actuators A, Phys., vol. 135, no. 1, pp. 34-42, Mar. 2007. (Pubitemid 46428076)
H. Ding, X. Lin, L. Lin, X. Chi, J. Cui, M. Kraft, Z. Yang, and G. Yan, "A high-resolution silicon-on-glass Z axis gyroscope operating at atmospheric press," IEEE Sensors J., vol. 10, no. 6, pp. 1066-1074, Jun. 2010.
