A Review of Pharmaceutical Extrusion: Critical Process Parameters and Scaling-up

[en] Hot melt extrusion has been a widely used process in the pharmaceutical area for three decades. In this field, it is important to optimize the formulation in order to meet specific requirements. However, the process parameters of the extruder should be as much investigated as the formulation since they have a major impact on the final product characteristics. Moreover, a design space should be defined in order to obtain the expected product within the defined limits. This gives some freedom to operate as long as the processing parameters stay within the limits of the design space. Those limits can be investigated by varying randomly the process parameters but it is recommended to use design of experiments. An examination of the literature is reported in this review to summarize the impact of the variation of the process parameters on the final product properties. Indeed, the homogeneity of the mixing, the state of the drug (crystalline or amorphous), the dissolution rate, the residence time, can be influenced by variations in the process parameters. In particular, the impact of the following process parameters: temperature, screw design, screw speed and feeding, on the final product, has been reviewed.

Research center :

Centre Interfacultaire de Recherche du Médicament - CIRM

Disciplines :

Pharmacy, pharmacology & toxicology

Author, co-author :

Thiry, Justine ; Université de Liège - ULiège > Département de pharmacie > Pharmacie galénique

Krier, Fabrice ; Université de Liège - ULiège > Département de pharmacie > Pharmacie galénique

Evrard, Brigitte ; Université de Liège - ULiège > Département de pharmacie > Pharmacie galénique

Language :

English

Title :

A Review of Pharmaceutical Extrusion: Critical Process Parameters and Scaling-up

Publication date :

01 February 2015

Journal title :

International Journal of Pharmaceutics

ISSN :

0378-5173

eISSN :

1873-3476

Publisher :

Elsevier Science, Amsterdam, Netherlands

Volume :

479

Issue :

Pages :

227-240

Peer reviewed :

Peer Reviewed verified by ORBi

Additional URL :

http://www.sciencedirect.com/science/article/pii/S0378517314009338

Name of the research project :

MYCOMELT

Available on ORBi :

since 05 January 2015

Statistics

Number of views

172 (46 by ULiège)

Number of downloads

5 (3 by ULiège)

More statistics

Scopus citations^®

122

Scopus citations^®
without self-citations

110

OpenCitations

102

Bibliography

Almeida, A., Possemiers, S., Boone, M.N., De Beer, T., Quinten, T., Van Hoorebeke, L., Remon, J.P., Vervaet, C., 2011. Ethylene vinyl acetate as matrix for oral sustained release dosage forms produced via hot-melt extrusion. Eur. J. Pharm. Biopharm. 77, 297-305.
Almeida, A., Saerens, L., De Beer, T., Remon, J.P., Vervaet, C., 2012. Upscaling and inline process monitoring via spectroscopic techniques of ethylene vinyl acetate hot-melt extruded formulations. Int. J. Pharm. 439, 223-229.
Anderson, M.J., 2011. What to Look for in Statistical Software. Stat-Ease, Inc.
Andrews, G., Margetson, D., Jones, D., McAllister, S., Diak, O., 2008. A Basic Guide: Hot-Melt Extrusion, vol. 13. UKICRS.
Andrews, G.P., Jones, D.S., 2014. Hot melt extrusion - processing solid solutions? J. Pharm. Pharmacol. 66, 145-147.
Breitenbach, J., 2002. Melt extrusion from process to drug delivery technology. Eur. J. Pharm. Biopharm. 54, 107-117.
Bruce, L.D., Shah, N.H., Waseem Malick, A., Infeld, M.H., McGinity, J.W., 2005. Properties of hot-melt extruded tablet formulations for the colonic delivery of 5-aminosalicylic acid. Eur. J. Pharm. Biopharm. 59, 85-97.
Chokshi, R., Zia, H., 2004. Hot-melt extrusion technique: a review. Iran. J. Pharm. Res. 3, 3-16.
Crowley, M.M., Zhang, F., Koleng, J.J., McGinity, J.W., 2002. Stability of polyethylene oxide in matrix tablets prepared by hot-melt extrusion. Biomaterials 23, 4241-4248.
Crowley, M.M., Zhang, F., Repka, M.A., Thumma, S., Upadhye, S.B., Kumar Battu, S., McGinity, J.W., Martin, C., 2007. Pharmaceutical applications of hot-melt extrusion: part I. Drug Dev. Ind. Pharm. 33, 909-926.
Dhumal, R.S., Kelly, A.L., York, P., Coates, P.D., Paradkar, A., 2010. Cocrystalization and simultaneous agglomeration using hot melt extrusion. Pharm. Res. 27, 2725-2733.
Dinunzio, J.C., Brough, C., Hughey, J.R., Miller, D.A., Williams, R.O., McGinity 3rd, J.W., 2010. Fusion production of solid dispersions containing a heat-sensitive active ingredient by hot melt extrusion and Kinetisol dispersing. Eur. J. Pharm. Biopharm. 74, 340-351.
Dover, H.W., 1902. Apparatus for insulating or covering strands and forming same into cables. Google Patents.
Gerrens, H., 1994. Handbuch der Technischen Polymerchemie. Von A. Echte. VCH Verlagsgesellschaft mbH, Weinheim 1993. 721 S., 398 Abb. und 57 Tab., geb., DM 276,-. Chem. Ing. Tech. 66, 239.
Gosh, I., Vippagunta, R., Li, S., Vippagunta, S., 2012. Key considerations for optimization of formulation and melt-extrusion process parameters for developing thermosensitive compound. Pharm. Dev. Technol. 17, 502-510.
Hanna, M.A., Gennadios, A., Mandigo, R.W., 1996. Restructuring of pork meat in a twin-screw extruder. J. Food Process. Preserv. 20, 391-402.
Giles Jr., H.F., Wagner, J.R., Mount III, E.M., 2005. Extrusion. The Definitive Proccessing Guide and Handbook. Crescent Associates, Inc., Rochester, NY, USA.
Hughey, Keen, J.M., Miller, D.A., Kolter, K., Langley, N., McGinity, J.W., 2013. The use of inorganic salts to improve the dissolution characteristics of tablets containing Soluplus1-based solid dispersions. Eur. J. Pharm. Sci. 48, 758-766.
ICH Harmonised Tripartite Guidline, 2009. Pharmaceitical development (R2) international conference on harmonisation of technical requirements for registration of pharmaceuticals for human use...
Janssens, S., de Armas, H.N., Remon, J.P., Van den Mooter, G., 2007. The use of a new hydrophilic polymer, Kollicoat IR1, in the formulation of solid dispersions of itraconazole. Eur. J. Pharm. Sci. 30, 288-294.
Jijun, F., Lili, Z., Tingting, G., Xing, T., Haibing, H., 2010. Stable nimodipine tablets with high bioavailability containing NM-SD prepared by hot-melt extrusion. Powder Technol. 204, 214-221.
Keen, J.M., Martin, C., Machado, A., Sandhu, H., McGinity, J.W., DiNunzio, J.C., 2014. Investigation of process temperature and screw speed on properties of a pharmaceutical solid dispersion using corotating and counter-rotating twin-screw extruders. J. Pharm. Pharmacol. 66, 204-217.
Kelly, A.L., Gough, T., Dhumal, R.S., Halsey, S.A., Paradkar, A., 2012. Monitoring ibuprofen-nicotinamide cocrystal formation during solvent free continuous cocrystallization (SFCC) using near infrared spectroscopy as a PAT tool. Int. J. Pharm. 426, 15-20.
Krier, F., Mantanus, J., Sacre, P.Y., Chavez, P.F., Thiry, J., Pestieau, A., Rozet, E., Ziemons, E., Hubert, P., Evrard, B., 2013. PAT tools for the control of co-extrusion implants manufacturing process. Int. J. Pharm. 458, 15-24.
Lang, B., McGinity, J.W., Williams 3rd, R.O., 2014. Dissolution enhancement of itraconazole by hot-melt extrusion alone and the combination of hot-melt extrusion and rapid freezing - effect of formulation and processing variables. Mol. Pharm. 11, 186-196.
Lepore, J., Spavins, J., 2008. PQLI Design Space. J. Pharm. Innov. 3, 79-87.
Li, Y., Pang, H., Guo, Z., Lin, L., Dong, Y., Li, G., Lu, M., Wu, C., 2014. Interactions between drugs and polymers influencing hot melt extrusion. J. Pharm. Pharmacol. 66, 148-166.
Listro, A., 2014. Taking the scare out of scale-up: hot melt extrusion case studies. AAPS, San Diego.
Liu, H., Zhu, L., Wang, P., Zhang, X., Gogos, C.G., 2012. Effects of screw configuration on indomethacin dissolution behavior in Eudragit E PO. Adv. Polym. Technol. 31, 331-342.
Lucazeau, G., 2003. Effect of pressure and temperature on Raman spectra of solids: anharmonicity. J. Raman Spectrosc. 34, 478-496.
Luker, K., Ghebre-Selassie, 2003. Pharmaceutical Extrusion Technology.
Lyons, J.G., Blackie, P., Higginbotham, C.L., 2008. The significance of variation in extrusion speeds and temperatures on a PEO/PCL blend based matrix for oral drug delivery. Int. J. Pharm. 351, 201-208.
Lyons, J.G., Hallinan, M., Kennedy, J.E., Devine, D.M., Geever, L.M., Blackie, P., Higginbotham, C.L., 2007. Preparation of monolithic matrices for oral drug delivery using a supercritical fluid assisted hot melt extrusion process. Int. J. Pharm. 329, 62-71.
Manikandan, P., Subramanian, N., 2013. Improving solubility and bioavailability of poorly water soluble drugs by solid dispersion technique - a review. Int. J. Pharm. Sci. Rev. Res. 23, 220-227.
Maniruzzaman, M., Boateng, J.S., Chowdhry, B.Z., Snowden, M.J., Douroumis, D., 2014. A review on the taste masking of bitter APIs: hot-melt extrusion (HME) evaluation. Drug Dev. Ind. Pharm. 40, 145-156.
Maniruzzaman, M., Boateng, J.S., Snowden, M.J., Douroumis, D., 2012. A review of hot-melt extrusion: process technology to pharmaceutical products. ISRN Pharm. 2012.
Miller, D.A., DiNunzio, J.C., Yang, W., McGinity, J.W., Williams 3rd, R.O., 2008. Targeted intestinal delivery of supersaturated itraconazole for improved oral absorption. Pharm. Res. 25, 1450-1459.
Moradiya, H., Islam, M.T., Woollam, G.R., Slipper, I.J., Halsey, S., Snowden, M.J., Douroumis, D., 2014a. Continuous cocrystallization for dissolution rate optimization of a poorly water-soluble drug. Cryst. Growth Des. 14, 189-198.
Moradiya, H.G., Islam, M.T., Halsey, S., Maniruzzaman, M., Chowdhry, B.Z., Snowden, M.J., Douroumis, D., 2014b. Continuous cocrystallisation of carbamazepine and trans-cinnamic acid via melt extrusion processing. CrystEngComm 16, 3573-3583.
Nakamichi, K., Nakano, T., Yasuura, H., Izumi, S., Kawashima, Y., 2002. The role of the kneading paddle and the effects of screw revolution speed and water content on the preparation of SD using twin-screw extruder. Int. J. Pharm. 241, 203-211.
Nakamichi, K., Nakano, T., Yasuura, H., Izumi, S., Kawashima, Y., 2003. Stabilization of sodium guaiazulene sulfonate in granules for tableting prepared using a twin-screw extruder. Eur. J. Pharm. Biopharm. 56, 347-354.
Nikitine, C., Rodier, E., Sauceau, M., Fages, J., 2009. Residence time distribution of a pharmaceutical grade polymer melt in a single screw extrusion process. Chem. Eng. Res. Des. 87, 809-816.
Quintavalle, U., Voinovich, D., Perissutti, B., Serdoz, F., Grassi, G., Dal Col, A., Grassi, M., 2008. Preparation of sustained release co-extrudates by hot-melt extrusion and mathematical modelling of in vitro/in vivo drug release profiles. Eur. J. Pharm. Sci. 33, 282-293.
Reitz, E., Podhaisky, H., Ely, D., Thommes, M., 2013. Residence time modeling of hot melt extrusion processes. Eur. J. Pharm. Biopharm. 85, 1200-1205.
Reitz, E., Vervaet, C., Neubert, R.H., Thommes, M., 2012. Solid crystal suspensions containing griseofulvin - preparation and bioavailability testing. Eur. J. Pharm. Biopharm. 83, 193-202.
Repka, M.A., Battu, S.K., Upadhye, S.B., Thumma, S., Crowley, M.M., Zhang, F., Martin, C., McGinity, J.W., 2007. Pharmaceutical applications of hot-melt extrusion: part II. Drug Dev. Ind. Pharm. 33, 1043-1057.
Repka, M.A., Langley, N., DiNunzio, J.C., 2013. Melt extrusion. AAPS.
Romanski, F., Zhuang, K., Langley, N., 2013. The importance of monitoring process parameters as a method for quality control for hot melt extrusion. AAPS Annual Meeting 2013, San Antonio, USA.
Saerens, L., Dierickx, L., Quinten, T., Adriaensens, P., Carleer, R., Vervaet, C., Remon, J. P., De Beer, T., 2012. In-line NIR spectroscopy for the understanding of polymer-drug interaction during pharmaceutical hot-melt extrusion. Eur. J. Pharm. Biopharm. 81, 230-237.
Saerens, L., Ghanam, D., Raemdonck, C., Francois, K., Manz, J., Kruger, R., Kruger, S., Vervaet, C., Remon, J.P., De Beer, T., 2014a. In-line solid state prediction during pharmaceutical hot-melt extrusion in a 12 mm twin screw extruder using Raman spectroscopy. Eur. J. Pharm. Biopharm. 87, 606-615.
Saerens, L., Segher, N., Vervaet, C., Remon, J.P., De Beer, T., 2014b. Validation of an inline Raman spectroscopic method for continuous active pharmaceutical ingredient quantification during pharmaceutical hot-melt extrusion. Anal. Chim. Acta 806, 180-187.
Saerens, L., Vervaet, C., Remon, J.P., De Beer, T., 2013. Visualization and process understanding of material behavior in the extrusion barrel during a hot-melt extrusion process using Raman spectroscopy. Anal. Chem. 85, 5420-5429.
Sarode, A.L., Sandhu, H., Shah, N., Malick, W., Zia, H., 2012. Hot melt extrusion (HME) for amorphous solid dispersions: predictive tools for processing and impact of drug-polymer interactions on supersaturation. Eur. J. Pharm. Sci. 48, 371-384.
Shah, S., Maddineni, S., Lu, J., Repka, M.A., 2013. Melt extrusion with poorly soluble drugs. Int. J. Pharm. 453, 233-252.
Swanborough, A., 2006. A practical approach to scale-up from bench-top. Twin Screw Extruders. Thermo Fisher Scientific Inc.
Theile, Ghebre-Selassie, 2003. Pharmaceutical Extrusion Technology.
Tomba, E., Facco, P., Bezzo, F., Barolo, M., 2013. Latent variable modeling to assist the implementation of Quality-by-Design paradigms in pharmaceutical development and manufacturing: a review. Int. J. Pharm. 457, 283-297.
Administration F.D.A, 2004. Process Analytical Technology Initiative, Guidance for Industry, PAT - a framework for innovative pharmaceutical development, manufacturing and quality assurance.
Verhoeven, E., De Beer, T.R., Van den Mooter, G., Remon, J.P., Vervaet, C., 2008. Influence of formulation and process parameters on the release characteristics of ethylcellulose sustained-release mini-matrices produced by hot-melt extrusion. Eur. J. Pharm. Biopharm. 69, 312-319.
Verhoeven, E., Vervaet, C., Remon, J.P., 2006. Xanthan gum to tailor drug release of sustained-release ethylcellulose mini-matrices prepared via hot-melt extrusion: in vitro and in vivo evaluation. Eur. J. Pharm. Biopharm. 63, 320-330.
Verreck, G., Decorte, A., Heymans, K., Adriaensen, J., Liu, D., Tomasko, D., Arien, A., Peeters, J., Van den Mooter, G., Brewster, M.E., 2006. Hot stage extrusion of p-amino salicylic acid with EC using CO2 as a temporary plasticizer. Int. J. Pharm. 327, 45-50.
Verreck, G., Six, K., Van den Mooter, G., Baert, L., Peeters, J., Brewster, M.E., 2003. Characterization of solid dispersions of itraconazole and hydroxypropylmethylcellulose prepared by melt extrusion - part I. Int. J. Pharm. 251, 165-174.
Vigh, T., Drávavölgyi, G., Sóti, P.L., Pataki, H., Igricz, T., Wagner, I., Vajna, B., Madarász, J., Marosi, G., Nagy, Z.K., 2014. Predicting final product properties of melt extruded solid dispersions from process parameters using Raman spectrometry. J. Pharm. Biomed. Anal. 98, 166-177.
Wahl, P.R., Treffer, D., Mohr, S., Roblegg, E., Koscher, G., Khinast, J.G., 2013. Inline monitoring and a PAT strategy for pharmaceutical hot melt extrusion. Int. J. Pharm. 455, 159-168.