[en] This paper compares the predictions of an isotropic-thermo-elasto-viscoplastic approach and of an anisotropic-thermo-elastoplastic one with experimental results representative of the mechanical behavior of Ti-6Al-4V at moderate temperatures and low strain rates. The first model is the well known Norton-Hoff viscoplastic constitutive law with isotropic von Mises yield locus identified by using monotonic tension tests performed at strain rates from 10-3 s-1 to 10-1 s-1 and at temperatures up to 400°C. The second model is a thermo-elasto-plastic one defined by the orthotropic yield criterion CPB06. It takes into account the anisotropy and the strength differential (SD) effect in tension-compression of Ti-6Al-4V at RT, 150°C and 400°C. The identification of the SD effect is done by using tension and compression tests and the anisotropy behavior is identified by using shear, plane strain, tension and compression tests performed in three orthogonal material directions. The accuracy of the load and displacements predictions of the two macroscopic constitutive models are compared to experimental results obtained from tests performed on specimens with multiaxial loadings and large strain at several temperatures.
Disciplines :
Materials science & engineering
Author, co-author :
Tuninetti Vásquez, Victor ; Université de Liège - ULiège > Département ArGEnCo > Département Argenco : Secteur MS2F
Habraken, Anne ; Université de Liège - ULiège > Département ArGEnCo > Département ArGEnCo
Language :
English
Title :
Impact of anisotropy and viscosity to model the mechanical behavior of Ti-6A1-4V alloy
Publication date :
2014
Journal title :
Materials Science and Engineering: A: Structural Materials: Properties, Microstructures and Processing
Bai, Q., Lin, J., Dean, T.A., Balint, D.S., Gao, T., Zhang, Z., (2013) Mater. Sci. Eng. A, 559, pp. 352-358
Lee, W.S., Lin, C.F., (1998) Mater. Sci. Eng. A, 241, pp. 48-59
Khan, A.S., Yu, S., Liu, H., (2012) Int. J. Plast., 38, pp. 14-26
Peirs, J., Verleysen, P., Degrieck, J., Coghe, F., (2010) Int. J. Impact Eng., 37, pp. 703-714
Yuan, Z., Li, F., Qiao, H., Xiao, M., Cai, J., Li, J., (2013) Mater. Sci. Eng. A, 578, pp. 260-270
Milani, A.S., Dabboussi, W., Nemes, J.A., Abeyaratne, R.C., (2009) Int. J. Impact Eng., 36, pp. 294-302
Seo, S., Min, O., Yang, H., (2005) Int. J. Impact Eng., 31, pp. 735-754
Zhang, C., Li, X., Li, D., Jin, C., Xiao, J., (2012) Nonferrous Met. Soc. China, 22, pp. s457-s464
Porntadawit, J., Uthaisangsuk, V., Choungthong, P., (2014) Mater. Sci. Eng. A, 599, pp. 212-222
Arrieta, H.V., Espinosa, H.D., (2001) Mechanics of Materials, 33, pp. 573-591
Johnson, G.R., Cook, W.H., A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures (1983), pp. 541-547. , Proceedings of the 7th International Symposium on Ballistics
Hoff, N.J., (1954) Quarterly of Applied Mathematics, 12, pp. 49-55
Hammami, W., Tirry, W., Coghe, F., Duchene, L., Delannay, L., Habraken, A.M., Ti6A14V anisotropy and texture evolution predictions using Multisite and self consistent crystal plasticity models Proceedings of the 12th World Conference on Titanium, Ti-2011, 2011
Gilles, G., Hammami, W., Libertiaux, V., Cazacu, O., Yoon, J.H., Kuwabara, T., Habraken, A.M., Duchêne, L., (2011) Int. J. Solids Struct., 48, pp. 1277-1289
Odenberger, E.L., Hertzman, J., Thilderkvist, P., Merklein, M., Kuppert, A., Stöhr, T., Lechler, J., Oldenburg, M., (2012) Int. J. Mater. Form., pp. 1-12
Cazacu, O., Plunkett, B., Barlat, F., (2006) Int. J. Plast., 22, pp. 1171-1194
Bron, F., Besson, J., (2004) Int. J. Plast., 20, pp. 937-963
Plunkett, B., Cazacu, O., Lebensohn, R.A., Barlat, F., (2007) Int. J. Plast., 23, pp. 1001-1021
Tuninetti, V., Gilles, G., Milis, O., Pardoen, T., Habraken, A.M., Anisotropy and tension-compression asymmetry predictions of the plastic response of bulk Ti-6Al-4V alloy at room temperature (unpublished results)
Lecarme, L., Viscoplasticity damage and fracture of Ti-6Al-4V (2013), (Ph.D. thesis), Université catholique de Louvain, Louvain
Peirs, J., Experimental characterisation and modelling of the dynamic behaviour of the titanium alloy Ti6Al4V (Ph.D. thesis), Ghent University, Ghent, 2012.
Tuninetti, V., Gilles, G., Péron-Lührs, V., Habraken, A.M., (2012) Proc. IUTAM, 4, pp. 206-214
Pascon, F., 2D1/2 Thermal-mechanical model of continuous casting of steel using finite element method (2002), (Ph.D. thesis), Université de Liège, Liege
Nelder, J., Mead, R., (1965) Comput. J., 7, pp. 308-313