Modeling of Pulverized Coal Combustion in Cement Rotary Kiln

[en] In this paper, based on analysis of the chemical and physical processes of clinker formation, a heat flux function was introduced to take account of the thermal effect of clinker formation. Combining the models of gas-solid flow, heat and mass transfer, and pulverized coal combustion, a set of mathematical models for a full-scale cement rotary kiln were established. In terms of commercial CFD code (FLUENT), the distributions of gas velocity, gas temperature, and gas components in a cement rotary kiln were obtained by numerical simulation of a 3000 t/d rotary kiln with a four-channel burner. The predicted results indicated that the improved model accounts for the thermal enthalpy of the clinker formation process and can give more insight (such as fluid flow, temperature, etc,) from within the cement rotary kiln, which is a benefit to better understanding of combustion behavior and an improvement of burner and rotary kiln technology.

Research center :

Huazhong Uni Versity of Science and Technology

Disciplines :

Energy

Author, co-author :

Wang, Shijie

Lu, Jidong

Li, Weijie

Li, Jie ; Université de Liège - ULiège > Département de chimie appliquée > Génie chimique - Procédés et développement durable

Hu, Zhijuan

Language :

English

Title :

Modeling of Pulverized Coal Combustion in Cement Rotary Kiln

Publication date :

2006

Journal title :

Energy and Fuels

ISSN :

0887-0624

eISSN :

1520-5029

Publisher :

American Chemical Society

Volume :

Pages :

2350-2356

Peer reviewed :

Peer Reviewed verified by ORBi

Available on ORBi :

since 19 March 2013

Statistics

Number of views

167 (3 by ULiège)

Number of downloads

2432 (2 by ULiège)

More statistics

Scopus citations^®

Scopus citations^®
without self-citations

OpenCitations

Bibliography

Lu, J. D.; Huang, L.; Hu Z. J.; Wang, S. J. Simulation of the gas-solid two-phase flow, coal combustion and raw meal calcination in a precalciner. ZKG Int. 2004, 57 (2), 55-63.
Georgallis, M.; Nowak, P.; Salcudean, M. Modelling the rotary lime kiln. Can. J. Chem. Eng. 2005, 83 (2), 212-223.
Khraisha, Y. H.; Dugwell, D. R. Thermal decompostion of limestone in a suspension reactor. Chem. Eng. Res. Des. 1989, 67, 52-57.
Khraisha, Y. H.; Dugwell, D. R. Coal combustion and limestone calcination in suspension reactor. Chem. Eng. Sci. 1992, 47 (5), 993-1006.
Carvalho, M. G.; Farias, T.; Martins, A. Three-dimensional modelling of the radiative heat transfer in a cement kiln. Conduction, Radiation and Phase Change; Computational Mechanics Inc: Billerica, MA, 1992; pp 141-160.
Ghoshdastidar, P. S.; Anandan Unni, V. K. Heat transfer in the non-reacting zone of a cement rotary kiln. J. Eng. Ind., Trans. ASME 1996, 118 (1), 169-171.
Guruz, H. K.; Bac, N. Mathematical modeling of rotary cement kiln by the zone method. Can. J. Chem. Eng. 1981, 59 (4), 540-548.
Modigell, M.; Liebig D.; Munstermann, S. Calculation of the clinker burning process using thermochemical process simulation. ZKG Int. 2002, 55 (7), 38-46.
Locher, G. Mathmatical models for the cement clinker burning process. Part 1: Reactions and unit operations. ZKG Int. 2002, 55 (1), 29-38.
Locher, G. Mathmatical models for the cement clinker burning process. Part 2: Rotary kiln. ZKG Int. 2002, 55 (3), 68-80.
Mastorakos, E.; Massias, A.; Tsakiroglou, C. D. CFD predictions for cement kilns including flame modelling, heat transfer and clinker chemistry. Appl. Math. Modell. 1999, 23 (1), 55-76.
Kolyfetis, E.; Markatos, N. C. Aerodynamics and coal-flame modelling in the burning zone of cement rotary kilns, Part 1. ZKG Int. 1996, 49 (1), 24-35.
Kolyfetis, E.; Markatos, N. C. Aerodynamics and coal-flame modelling in the burning zone of cement rotary kilns, Part 2. ZKG Int. 1996, 49 (6), 326.
Hou, L. Y.; Fu, W. B.; Zhang Y. J. A theoretical analysis on combustion intensification for blended coal in rotary cement kiln. Fuel 2001, 80, 1645-1650.
Chen, Q. G.; Xu, Z.; Zhang, Y. J. Application of two versions of a RNG based k-ε model to numerical simulations of turbulent impinging jet flow. J. Hydrodyn. 2003, 15 (2), 71-76.
Kuang, C. P. Recirculating flow in shallow open channel via the RNG k-ε model. J. Hydrodyn. 1999, 11 (1), 41-49.
Siegel, R.; Howell, J. R. Thermal Radiation Heat Transfer; Hemisphere Publishing Corporation: Washington, DC, 1992.
Smoot, L. D.; Smith, P. J. Coal Combustion and Gasification; Plenum Press: New York, 1985.
Huang, L.; Lu, J. D.; Xia, F. 3-D mathematical modeling of an in-line swirl-spray precalciner. Chem. Eng. Process. 2006, 45 (3), 204-213.
Fan, J. R.; Zhang, X. Y.; Chen L. H.; Cen, K. F. New stochastic particle dispersion modeling of a turbulent particle-laden round jet. Chem. Eng. J. 1997, 66, 207-215.
Ghenai, C.; Lin, C. X.; Ebadian, M. A. Numerical investigation of oxygen-enriched pulverized coal combustion. Proc. 2003 ASME Summer Heat Transfer Conf. 2, 57-62.
Jamaluddin, A. S.; Truelove, J. S.; Wall, T. F. Modeling of coal devolatilization and its effects on combustion calculations. Combust. Flame 1985, 62, 85-89.
Smoot, L. D. Modeling of coal combustion processes. Prog. Energy Combust. Sci. 1984, 10 (22), 229-254.
Zhao, X.; Richards, P. G.; Zhang, S. J. High-resolution schemes for bubbling flow computation. Appl. Math. Modell. 2005, 29, 1232-1251.
Patel, M. K.; Markatos, N. C. Evaluation of eight discretization schemes for two-dimensional convection-diffusion equations. Int. J. Numer. Methods Fluids 1986, 6 (3), 129-154.