Reference : Face milling and turning simulation with the finite element method
Scientific congresses and symposiums : Paper published in a book
Engineering, computing & technology : Mechanical engineering
http://hdl.handle.net/2268/14251
Face milling and turning simulation with the finite element method
English
Masset, Luc mailto [Université de Liège - ULg > Département d'aérospatiale et mécanique > Laboratoire de structures et systèmes spatiaux >]
Debongnie, Jean-François mailto [Université de Liège - ULg > Département d'aérospatiale et mécanique > Méthodes de fabrication >]
Beckers, Pierre mailto [Université de Liège - ULg > Département d'aérospatiale et mécanique > Département d'aérospatiale et mécanique >]
Apr-2001
Proceedings of the 4th International ESAFORM Conference on Material Forming
Habraken, Anne mailto
Université de Liège
627-630
Yes
No
International
Liège
Belgique
The 4th International ESAFORM Conference on Material Forming
du 23 avril 2001 au 25 avril 2001
Université de Liège, Département MSM
Liège
Belgique
[en] Finite elements ; Machining simulation ; Milling ; Turning ; Form error ; LIMARC
[en] The paper describes a new simulation tool that gives the machined surface error in face milling and turning. The form error component due to the workpiece flexibility is computed using Samcef finite element code. The finite element analyses are very efficient on industrial applications thanks to the superelement method. Results are obtained in a short time which makes possible a wide range of simulations such as finding the best tool trajectory, testing several tools and cutting conditions and choosing the most suited fixture design.
Researchers ; Professionals
http://hdl.handle.net/2268/14251

File(s) associated to this reference

Fulltext file(s):

FileCommentaryVersionSizeAccess
Open access
ESAFORM_2001.pdfAuthor preprint1.82 MBView/Open

Bookmark and Share SFX Query

All documents in ORBi are protected by a user license.