Article (Scientific journals)
Room-temperature MBE deposition, thermoelectric properties, and advanced structural characterization of binary Bi2Te3 and Sb2Te3 thin films
Peranio, Nicola; Winkler, Markus; Bessas, Dimitrios et al.
2012In Journal of Alloys and Compounds, 521, p. 163-173
Peer Reviewed verified by ORBi
 

Files


Full Text
064_2012_Peranio_JAllCmpds_MBEBi2Te3.pdf
Publisher postprint (2.17 MB)
Request a copy

All documents in ORBi are protected by a user license.

Send to



Details



Abstract :
[en] Sb2Te3 and Bi2Te3 thin films were grown at room temperature on SiO2 and BaF2 substrates using molecular beam epitaxy. A layer-by-layer growth was achieved such that metallic layers of the elements with 0.2 nm thickness were deposited. The layer structure in the as-deposited films was confirmed by X-ray diffraction and was seen more clearly in Sb2Te3 thin films. Subsequent annealing was done at 250 degrees C for 2 h and produced the Sb2Te3 and Bi2Te3 crystal structure as confirmed by high-energy X-ray diffraction. This preparation process is referred to as nano-alloying and it was demonstrated to yield single-phase thin films of these compounds. In the thin films a significant texture could be identified with the crystal c axis being almost parallel to the growth direction for Sb2Te3 and tilted by about 30 degrees for Bi2Te3 thin films. Inplane transport properties were measured for the annealed films at room temperature. Both films yielded a charge carrier density of about 2.6 x 10(19) cm (3). The Sb2Te3 films were p-type, had a thermopower of +130 mu V K-1, and surprisingly high mobilities of 402 cm(2) V-1 s(-1). The Bi2Te3 films were n-type, showed a thermopower of -153 mu V K-1, and yielded significantly smaller mobilities of 80 cm(2) V-1 s(-1). The chemical composition and microstructure of the films were investigated by transmission electron microscopy (TEM) on cross sections of the thin films. The grain sizes were about 500 nm for the Sb2Te3 and 250 nm for the Bi2Te3 films. In the Bi2Te3 thin film, energy-filtered TEM allowed to image a Bi-rich grain boundary phase, several nanometers thick. This secondary phase explains the poor mobilities of the Bi2Te3 thin film. With these results the high potential of the nano-alloying deposition technique for growing films with a more complex layer architecture is demonstrated. (C) 2012 Elsevier B.V. All rights reserved.
Disciplines :
Physics
Author, co-author :
Peranio, Nicola;  Eberhard Karls Universität Tübingen > Institut für Angewandte Physik
Winkler, Markus;  Fraunhofer Institut Physikalische Messtechnik
Bessas, Dimitrios ;  Université de Liège - ULiège > Doct. sc. (chimie - Bologne)
Aabdin, Zainul;  Eberhard Karls Universität Tübingen > Institut für Angewandte Physik
Koenig, Jan D.
Boettner, Harald;  Fraunhofer Institut Physikalische Messtechnik
Hermann, Raphaël ;  Université de Liège - ULiège > Département de chimie (sciences) > Département de chimie (sciences)
Eibl, Oliver;  Eberhard Karls Universität Tübingen > Institut für Angewandte Physik
Language :
English
Title :
Room-temperature MBE deposition, thermoelectric properties, and advanced structural characterization of binary Bi2Te3 and Sb2Te3 thin films
Publication date :
2012
Journal title :
Journal of Alloys and Compounds
ISSN :
0925-8388
eISSN :
1873-4669
Publisher :
Elsevier, Amsterdam, Netherlands
Volume :
521
Pages :
163-173
Peer reviewed :
Peer Reviewed verified by ORBi
Available on ORBi :
since 14 December 2012

Statistics


Number of views
83 (2 by ULiège)
Number of downloads
2 (1 by ULiège)

Scopus citations®
 
58
Scopus citations®
without self-citations
48
OpenCitations
 
47

Bibliography


Similar publications



Contact ORBi