References of "IOP Conference Series: Materials Science and Engineering"
     in
Bookmark and Share    
Full Text
Peer Reviewed
See detailCO2 reforming of methane: valorizing CO2 by means of Dielectric Barrier Discharge
Machrafi, Hatim ULg; Cavadias, Simeon; Amouroux, Jacques

in IOP Conference Series: Materials Science and Engineering (2011), 19(1), 012006

The impact of pollution on the environment is causing several problems that are to be reduced as much as possible. One important example is the production of CO2 that is emitted by many transport and ... [more ▼]

The impact of pollution on the environment is causing several problems that are to be reduced as much as possible. One important example is the production of CO2 that is emitted by many transport and industrial applications. An interesting solution is to view CO2 as a source instead of a product that can be stocked. The case considered in this work is the CO2 reformation of methane producing hydrogen and CO. It is an endothermic reaction, for which the activition barrier needs to be overcome. The method of Dielectric Barrier Discharge can do this efficiently. The process relies on the collision of electrons, which are accelerated under an electrical field that is created in the discharge area. This leads to the formation of reactive species, which facilitate the abovementioned reaction. The determination of the electron density is performed by PLASIMO. The study is subsequently continued using the Reaction Engineering module in COMSOL (with an incorporated kinetic mechanism) in order to model the discharge phase. Then COMSOL (continuity and Navier-Stokes equations) is used to model the flow in the post-discharge phase. The results showed that both a 2D and 3D model can be used to model the chemical-plasma process. These methods need strongly reduced kinetic mechanism, which in some cases can cause loss of precision. It is also observed that the present experimental set-up that is modeled needs to be improved. A suggestion is made. [less ▲]

Detailed reference viewed: 32 (5 ULg)
Full Text
Peer Reviewed
See detailPreparation of Spherical Submicronic Barium Zirconate particles in Highly Basic Solution below 100°C
Boschini, Frédéric ULg; Cloots, Rudi ULg; Vertruyen, Bénédicte ULg

in IOP Conference Series: Materials Science and Engineering (2011)

In this study, a new method has been developed to produce pure crystalline BaZrO3 powders from Ba+Zr solution or weakly soluble reactants by using precipitation route in highly basic aqueous solution. The ... [more ▼]

In this study, a new method has been developed to produce pure crystalline BaZrO3 powders from Ba+Zr solution or weakly soluble reactants by using precipitation route in highly basic aqueous solution. The influence of several synthesis parameters is studied. At high OH- concentration ([NaOH] = 20 mol/l), it is possible to obtain the well-crystallized stoichiometric perovskite phase at relatively low temperature (~80°C), after a short reaction time (15 minutes) and without requiring any precaution to avoid the presence of CO2. This synthesis method yields spherical particles, whose size can be controlled by changing the concentration of the Ba+Zr solution. No calcination treatment is necessary since the precipitate is crystalline. Suitable choice of the synthesis parameters ([NaOH] = 20 mol/l, [Ba+Zr] = 1 mol/l, reaction time = 15 minutes) yields a sub-micron precipitate. [less ▲]

Detailed reference viewed: 9 (2 ULg)