References of "Schrijnemakers, Audrey"
     in
Bookmark and Share    
See detailHigh Performance DSSC Based on Semiconducting Oxides Prepared Through Soft Chemistry Processes
Dewalque, Jennifer ULg; Schrijnemakers, Audrey ULg; Thalluri, Venkata Visveswara Gopala Kris ULg et al

Conference (2013, July)

DSSCs have been reported by O’Regan and Grätzel in the early nineties as a very promising alternative to conventional photovoltaic silicon devices. Main benefits of these cells are their low cost as well ... [more ▼]

DSSCs have been reported by O’Regan and Grätzel in the early nineties as a very promising alternative to conventional photovoltaic silicon devices. Main benefits of these cells are their low cost as well as their mild manufacturing process. In most of the specific literature, DSSCs are made of TiO2 films prepared by doctor-blade or screen-printing of anatase nanoparticles paste. However, due to the random organization of the nanoparticles, pore accessibility by the dye and electrolyte could be incomplete. Moreover, some anatase crystallites could suffer from a lack of connectivity, leading to electron transfer issues. The strategy adopted by our group to improve photovoltaic efficiencies involves a templating-assisted process allowing the preparation of highly porous layers with well-ordered and accessible pores as well as improved crystallites connectivity. The main goal is to increase the film surface area and to perfectly control the mesostructure in order to maximize the adsorption of active dye and the electrolyte infiltration inside the porous network. This talk especially focuses on the templating-assisted synthesis of TiO2 and ZnO semiconducting layers used as photoelectrode in DSSCs. Besides, due to the surface area improvement as well as the perfect control of the pore organization and the pore size, the templating strategy can be an effective solution to overcome light harvesting and solid electrolyte filling limitations encountered in solid-state DSSCs. Special effort is paid to the tuning of the TiO2 and ZnO semiconducting layers mesostructure in order to match with solid-state DSSC applications. [less ▲]

Detailed reference viewed: 27 (1 ULg)
Full Text
Peer Reviewed
See detailMullite plasma spraying for in situ repair of cracks in mullite refractories: Simultaneous optimization of porosity and thickness by statistical design of experiments
Schrijnemakers, Audrey ULg; Francq, B. G.; Cloots, Rudi ULg et al

in Journal of Thermal Spray Technology (2013), 22(7), 1133-1139

We report a laboratory-scale study about the suitability of the plasma spraying process for "in situ" repair of cracks in mullite refractories of industrial furnaces. The "design of experiments" approach ... [more ▼]

We report a laboratory-scale study about the suitability of the plasma spraying process for "in situ" repair of cracks in mullite refractories of industrial furnaces. The "design of experiments" approach is used to investigate how the coating porosity and thickness are influenced by six experimental parameters. Arc current, secondary gas (H 2) flow rate, and stand-off distance are the most significant parameters for both responses. Several interaction terms also affect significantly the thickness response. The validity of the model equations is discussed both from a statistical point of view and regarding the physical credibility of the main model terms. Additional experiments confirm that the measured properties lie into the prediction intervals provided by the model. Using a set of parameters optimized for minimal porosity and high thickness (relevant for the crack repair application), coatings with 6% porosity and 1070 μm thickness can be prepared reproducibly. © 2013 ASM International. [less ▲]

Detailed reference viewed: 13 (4 ULg)
Full Text
Peer Reviewed
See detailNanosphere Lithography and Hydrothermal Growth : How to Increase Surface Area and Control Reversible Wetting Properties of ZnO Nanowire Arrays ?
Colson, Pierre ULg; Schrijnemakers, Audrey ULg; Vertruyen, Bénédicte ULg et al

in Journal of Materials Chemistry (2012), 22(33), 17086-17093

Due to their large surface-area-to-volume ratio as well as their interesting intrinsic optical and electronic properties, ZnO 1D nanostructures are part of the few dominant materials for nanotechnology ... [more ▼]

Due to their large surface-area-to-volume ratio as well as their interesting intrinsic optical and electronic properties, ZnO 1D nanostructures are part of the few dominant materials for nanotechnology. In this article, we compare two different routes of using the nanosphere lithography for the manufacturing of well-aligned, density-controlled ZnO nanowires by low-temperature hydrothermal growth. The first route uses the colloidal mask as a template for the patterned growth of the nanowires, while in the second route, the nanospheres act as a mask to pattern the seed layer. SEM and XRD characterizations are performed on samples manufactured by both routes and evidence patterned well-aligned nanowires with high c-axis texturing in the first synthetic route. Oriented growth is less pronounced in the second route, as well as the ability to adsorb dye. However, for the first route the dye loading measurements reveal that the amount of N-719 adsorbed is higher than on unpatterned ZnO nanowires films, highlighting an increased interface area. Reversible hydrophobicity to superhydrophilicity transition was observed and intelligently controlled by alternation of UV illumination and dark storage. This promising synthetic route opens exciting perspectives for the production of ZnO nanowire arrays with tunable density, wetting properties and enhanced adsorption properties. [less ▲]

Detailed reference viewed: 58 (28 ULg)
Full Text
Peer Reviewed
See detailMullite coatings on ceramic substrates: Stabilisation of Al2O3-SiO2 suspensions for spray drying of composite granules suitable for reactive plasma spraying
Schrijnemakers, Audrey ULg; Andre, Sophie; Lumay, Geoffroy ULg et al

in Journal of the European Ceramic Society (2009), 29(11), 2169-2175

The present work deals with the preparation of stable alumina + silica suspensions with high solid loading for the production of spray-dried composite powders. These composite powders are to be used for ... [more ▼]

The present work deals with the preparation of stable alumina + silica suspensions with high solid loading for the production of spray-dried composite powders. These composite powders are to be used for reactive plasma spraying whereby the formation of mullite and the coating on a ceramic substrate are achieved in a single step process. Electrostatic stabilisation of alumina and silica suspensions has been studied as a function of pH. Silica suspensions are most stable at basic pH whereas alumina suspensions are stable at acidic pH. The addition of ammonium polymethacrylate (APMA) makes it possible to stabilise alumina and prepare a stable 50 wt% alumina + silica suspension at pH 10. The optimum amounts of dispersant and binder have been determined by zeta potential, viscosity and sedimentation measurements. Spray drying of the suspension yields composite powders whose morphology, size distribution and flowability have been characterized before realizing reactive plasma spraying tests. (C) 2009 Elsevier Ltd. All fights reserved. [less ▲]

Detailed reference viewed: 196 (40 ULg)