References of "Sacre, Pierre-Yves"
     in
Bookmark and Share    
Full Text
See detailRaman Hyperspectral Imaging: An essential tool in the pharmaceutical field
Sacre, Pierre-Yves ULg; De Bleye, Charlotte ULg; Netchacovitch, Lauranne ULg et al

E-print/Working paper (2017)

Raman hyperspectral imaging results from the powerful combination of spatial (imaging) and spectral (Raman) information. It is increasingly used both in R&D and in the industry because it allows the ... [more ▼]

Raman hyperspectral imaging results from the powerful combination of spatial (imaging) and spectral (Raman) information. It is increasingly used both in R&D and in the industry because it allows the investigation of many characteristics of solid samples. This technique provides an accurate tool for qualitative and quantitative analysis of a pharmaceutical solid formulation. In this webinar, Assoc. Prof. Ziemons will present fundamental concepts of hyperspectral imaging data analysis and key applications in pharmaceutical and biomedical field. [less ▲]

Detailed reference viewed: 25 (0 ULg)
Full Text
See detailLe fléau des faux médicaments
Marini Djang'Eing'A, Roland ULg; Ziemons, Eric ULg; Sacre, Pierre-Yves ULg et al

Conference given outside the academic context (2017)

Detailed reference viewed: 23 (6 ULg)
Full Text
Peer Reviewed
See detailGlobal approach for the validation of an in-line Raman spectroscopic method to determine the API content in real-time during a hot-melt extrusion process
Netchacovitch, Lauranne ULg; Thiry, Justine ULg; De Bleye, Charlotte ULg et al

in Talanta (2017)

Since the Food and Drug Administration (FDA) published a guidance based on the Process Analytical Technology (PAT) approach, real-time analyses during manufacturing processes are in real expansion. In ... [more ▼]

Since the Food and Drug Administration (FDA) published a guidance based on the Process Analytical Technology (PAT) approach, real-time analyses during manufacturing processes are in real expansion. In this study, in-line Raman spectroscopic analyses were performed during a Hot-Melt Extrusion (HME) process to determine the Active Pharmaceutical Ingredient (API) content in real-time. The method was validated based on a univariate and a multivariate approach and the analytical performances of the obtained models were compared. Moreover, on one hand, in-line data were correlated with the real API concentration present in the sample quantified by a previously validated off-line confocal Raman microspectroscopic method. On the other hand, in-line data were also treated in function of the concentration based on the weighing of the components in the prepared mixture. The importance of developing quantitative methods based on the use of a reference method was thus highlighted. The method was validated according to the total error approach fixing the acceptance limits at ± 15% and the α risk at ± 5%. This method reaches the requirements of the European Pharmacopeia norms for the uniformity of content of single-dose preparations. The validation proves that future results will be in the acceptance limits with a previously defined probability. Finally, the in-line validated method was compared with the off-line one to demonstrate its ability to be used in routine analyses. [less ▲]

Detailed reference viewed: 31 (5 ULg)
Full Text
Peer Reviewed
See detailMoisture content determination in an antibody-drug conjugate freeze-dried medicine by near-infrared spectroscopy: a case study for release testing
Clavaud, Matthieu ULg; Roggo, Yves; Dégardin, Klara et al

in Journal of Pharmaceutical & Biomedical Analysis (2016), 131

The use of Near-infrared spectroscopy (NIRS) as a fast and non-destructive technique was employed for moisture content (MC) determination in Antibody-drug conjugates (ADCs) in replacement to Karl Fischer ... [more ▼]

The use of Near-infrared spectroscopy (NIRS) as a fast and non-destructive technique was employed for moisture content (MC) determination in Antibody-drug conjugates (ADCs) in replacement to Karl Fischer (KF) method. The lab analysis of ADCs, high potent medicines, should be performed in conditions ensuring the operator’s safety and using secured analytical tools like NIRS. A NIRS method was first developed and validated in compliance with current guidelines. The novelty of this work first lies in the large number of samples prepared for a wide moisture calibration range of 0.51% to 4.01%. Then, the classical Partial Least Square (PLS) regression was used as chemometric tool for the computation of the model. Excellent predictive calibration results were shown. A coefficient of correlation (r) value of 0.99 was obtained. An intercept value of 0.02 and a slope of 0.99 were observed, while the root mean square error of calibration (RMSEC) and the root mean square error of prediction (RMSEP) were respectively 0.10% and 0.12%. In addition, instrumentation, model performances and robustness of the method were evaluated, demonstrating the validation results. Calibration transfer issue and impact of the number of samples were also evaluated. Consequently, a validation strategy was introduced as a basis for submission to the health authorities’ for release and stability activities in a cGMP environment in replacement of the KF method. [less ▲]

Detailed reference viewed: 34 (18 ULg)
Full Text
Peer Reviewed
See detailMonitoring of anatabine release by methyl jasmonate elicited BY-2 cells using surface-enhanced Raman scattering
De Bleye, Charlotte ULg; Dumont, Elodie ULg; Dispas, Amandine ULg et al

in Talanta (2016), 160

A new application of surface-enhanced Raman scattering (SERS) in the field of plant material analysis is proposed in this study. The aim was to monitor the release of anatabine by methyl jasmonate (MeJa ... [more ▼]

A new application of surface-enhanced Raman scattering (SERS) in the field of plant material analysis is proposed in this study. The aim was to monitor the release of anatabine by methyl jasmonate (MeJa) elicited Bright Yellow-2 (BY-2) cells. Gold nanoparticles (AuNps) were used as SERS substrate. The first step was to study the SERS activity of anatabine in a complex matrix comprising the culture medium and BY-2 cells. The second step was the calibration. This one was successfully performed directly in the culture medium in order to take into account the matrix effect, by spiking the medium with different concentrations of anatabine, leading to solutions ranging from 250 to 5000 µg L-1. A univariate analysis was performed, the intensity of a band situated at 1028 cm-1, related to anatabine, was plotted against the anatabine concentration. A linear relationship was observed with a R2 of 0.9951. During the monitoring study, after the MeJa elicitation, samples were collected from the culture medium containing BY-2 cells at 0, 24h, 48h, 72h and 96h and were analyzed using SERS. Finally, the amount of anatabine released in the culture medium was determined using the response function, reaching a plateau after 72h of 82 µg of anatabine released / g of fresh weight (FW) MeJa elicited BY-2 cells. [less ▲]

Detailed reference viewed: 44 (18 ULg)
Full Text
Peer Reviewed
See detailA simple calibration approach based on film-casting for confocal Raman microscopy to support the development of a Hot-Melt Extrusion process
Netchacovitch, Lauranne ULg; Thiry, Justine ULg; De Bleye, Charlotte ULg et al

in Talanta (2016), 154

When developing a new formulation, the development, calibration and validation steps of analytical methods based on vibrational spectroscopy are time-consuming. For each new formulation, real samples must ... [more ▼]

When developing a new formulation, the development, calibration and validation steps of analytical methods based on vibrational spectroscopy are time-consuming. For each new formulation, real samples must be produced and a “reference method” must be used in order to determine the Active Pharmaceutical Ingredient (API) content of each sample. To circumvent this issue, the paper presents a simple approach based on the film-casting technique used as a calibration tool in the framework of hot-melt extrusion process. Confocal Raman microscopic method was successfully validated for the determination of itraconazole content in film-casting samples. Then, hot-melt extrusion was carried out to produce real samples in order to confront the results obtained with confocal Raman microscopy and Ultra High Performance Liquid Chromatography (UHPLC). The agreement between both methods was demonstrated using a comparison study based on the Bland and Altman’s plot. [less ▲]

Detailed reference viewed: 100 (28 ULg)
Full Text
Peer Reviewed
See detailScreening study of SFC critical method parameters for the determination of pharmaceutical compounds
Dispas, Amandine ULg; Lebrun, Pierre ULg; Sacre, Pierre-Yves ULg et al

in Journal of Pharmaceutical & Biomedical Analysis (2016), 125

Nowadays, supercritical fluid chromatography is commonly presented as a promising alternative technique in the field of separation sciences. Nevertheless the selection of chromatographic conditions and ... [more ▼]

Nowadays, supercritical fluid chromatography is commonly presented as a promising alternative technique in the field of separation sciences. Nevertheless the selection of chromatographic conditions and sample preparation of pharmaceutical compounds remain a challenge and peak distortion was previously highlighted. The main objective of the present work was to evaluate the impact of different critical method parameters (CMPs), i.e. stationary phase, mobile phase composition and injection solvent nature. The experiments were performed considering two groups of antimalarial molecules: one group with neutral/apolar compounds and the other one with salt form of polar compounds. In this context, another objective was to propose a suitable sample solvent for quantitative analysis. The interest of new generation stationary phase to obtain good peak shape and the interest to tune the mobile phase composition were demonstrated. During this study, design of experiments and desirability function approach enabled to highlight optimal chromatographic conditions in order to maximise peak capacity and to get acceptable value of symmetry factor. Regarding sample injection solvent composition, some counterintuitive results were observed: solvents closer to the mobile phase polarity (i.e heptane or 2-propanol/heptane mixture) did not provide best results in terms of peak symmetry. In addition, acetonitrile and short aliphatic alcohols offered an interesting alternative as injection solvent: toxicity of solvents used is clearly reduced and better quantitative performances could be expected while keeping high peak capacity and symmetric sharp peaks. Finally, the quantitative performances were evaluated by the method validation for the quantitative determination of quinine sulfate in a pharmaceutical formulation. These better understandings on critical method parameters led SFC to be an even more promising technique in the field of the analysis of pharmaceutical compounds. [less ▲]

Detailed reference viewed: 47 (19 ULg)
Full Text
See detailMédicaments usage de faux
Sacre, Pierre-Yves ULg; Ziemons, Eric ULg; Hubert, Philippe ULg et al

Article for general public (2016)

Detailed reference viewed: 56 (12 ULg)
Full Text
Peer Reviewed
See detailFrom Near-Infrared and Raman to Surface-Enhanced Raman Spectroscopy: Progress, Limitations, Perspectives in Bioanalysis
Dumont, Elodie ULg; De Bleye, Charlotte ULg; Sacre, Pierre-Yves ULg et al

in Bioanalysis (2016), 8(10), 1077-1103

Over recent decades, spreading environmental concern entailed the expansion of green chemistry analytical tools. Vibrational spectroscopy, belonging to this class of analytical tool, is particularly ... [more ▼]

Over recent decades, spreading environmental concern entailed the expansion of green chemistry analytical tools. Vibrational spectroscopy, belonging to this class of analytical tool, is particularly interesting taking into account its numerous advantages such as fast data acquisition and no sample preparation. In this context, Near-Infrared, Raman and mainly Surface-Enhanced Raman Spectroscopy (SERS) have thus gained interest in many fields including bioanalysis. The two former techniques only ensure the analysis of concentrated compounds in simple matrices, whereas the emergence of SERS improved the performances of vibrational spectroscopy to very sensitive and selective analyses. Complex SERS substrates were also developed enabling biomarker measurements, paving the way for SERS immunoassays. Therefore, in this paper, the strengths and weaknesses of these techniques will be highlighted with a focus on recent progress. [less ▲]

Detailed reference viewed: 115 (25 ULg)
Full Text
Peer Reviewed
See detailPoplar-root-knot nematode interaction: a model for perennial woody species
Baldacci-Cresp, Fabien; Sacre, Pierre-Yves ULg; Twyffels, Laure et al

in Molecular Plant-Microbe Interactions [=MPMI] (2016), 29(7), 560-572

Plant root-knot nematode interaction studies are performed on several host plant models. However, even though root-knot nematodes interact with trees, no perennial woody model has been explored so far. We ... [more ▼]

Plant root-knot nematode interaction studies are performed on several host plant models. However, even though root-knot nematodes interact with trees, no perennial woody model has been explored so far. We show here that poplar (Populus tremula x Populus alba) grown in vitro is susceptible to Meloidogyne incognita as this nematode is able to penetrate, to induce feeding sites and to reproduce in poplar roots. As analyzed by Raman spectromicroscopy, the cell walls of the giant cells, with typical characteristics of transfer cell walls, were not lignified and were composed mainly of pectin and cellulose. To better depict the poplar-nematode interaction at the molecular level, a quantitative RT-PCR analysis was performed to study changes in poplar gene expression in galls compared to non-infected roots. Three marker genes, reported for other plant hosts, including expansin A, histone 3.1 and asparagine synthase, were conserved for poplar-nematode interaction. In addition, the down-regulation of four genes coding for enzymes of the lignin biosynthesis pathway was evidenced in galls, suggesting a modification in lignin composition within galls developed in poplar roots. Together, this study shows that poplar is a suitable model host for specific traits of tree-nematode interaction. [less ▲]

Detailed reference viewed: 74 (10 ULg)
Full Text
Peer Reviewed
See detailAnalytical Tools and Strategic Approach to Detect Poor Quality Medicines, Identify Unknown Components, and Timely Alerts for Appropriate Measures: Case Study of Antimalarial Medicines
Habyalimana, Védaste ULg; Mbinze Kindenge, Jérémie; Kalenda Tshilombo, Nicodème ULg et al

in American Journal of Analytical Chemistry (2015), 6

Nowadays, the circulation of poor quality medicines is becoming an alarming worldwide phenomenon with serious public health and socio-economic concerns. The situation is particularly critical in ... [more ▼]

Nowadays, the circulation of poor quality medicines is becoming an alarming worldwide phenomenon with serious public health and socio-economic concerns. The situation is particularly critical in developing countries where drug quality assurance and regulatory systems for drug manufacturing, importation, distribution and sales are weak. A sustained vigilance on poor quality medicines that regroup counterfeit/falsified, substandard and degraded medicines is therefore required to ensure patient safety and genuine medicines integrity. A case situation is illustrated including a strategic approach and analytical tools that were found useful to detect poor quality medicines, identify unknown components, and timely alerts for appropriate measures against the spread of those harmful products. Several suspected medicines randomly sampled in several strategic Rwandan areas were firstly check-controlled by means of visual inspection and then applying several analytical techniques from simple to more complex ones. The following medicines were studied: quinine sulfate tablets, artemisinin-based combination tablets, and artesunate powders for injection. Taking into account the pharmaceutical forms and the chemical characteristics, the following tests were applied: uniformity of mass, friability, disintegration, fluorescence, identification and assay. They were followed by more complex analytical techniques that allowed more comprehension of abnormal findings among which the presence of a wrong active pharmaceutical ingredient in quinine sulfate tablets which is mainly discussed in this paper to illustrate a strategic approach and various analytical tools that can be used in detecting and identifying unknown component in poor quality medicines. [less ▲]

Detailed reference viewed: 50 (15 ULg)
Full Text
Peer Reviewed
See detailA simple approach for ultrasensitive detection of bisphenols by multiplexed surface-enhanced Raman scattering
De Bleye, Charlotte ULg; Dumont, Elodie ULg; Hubert, Cédric ULg et al

in Analytica Chimica Acta (2015), 888

Bisphenol A (BPA) is well known for its use in plastic manufacture and thermal paper production despite its risk of health toxicity as an endocrine disruptor in humans. Since the publication of new ... [more ▼]

Bisphenol A (BPA) is well known for its use in plastic manufacture and thermal paper production despite its risk of health toxicity as an endocrine disruptor in humans. Since the publication of new legislation regarding the use of BPA, manufacturers have begun to replace BPA with other phenolic molecules such as bisphenol F (BPF) and bisphenol B (BPB), but there are no guarantees regarding the health safety of these compounds at this time. In this context, a very simple, cheap and fast surface-enhanced Raman scattering (SERS) method was developed for the sensitive detection of these molecules in spiked tap water solutions. Silver nanoparticles were used as SERS substrates. An original strategy was employed to circumvent the issue of the affinity of bisphenols for metallic surfaces and the silver nanoparticles surface was functionalized using pyridine in order to improve again the sensitivity of the detection. Semi-quantitative detections were performed in tap water solutions at a concentrations range from 0.25 to 20 µg L-1 for BPA and BPB and from 5 to 100 µg L-1 for BPF. Moreover, a feasibility study for performing a multiplex-SERS detection of these molecules was also performed before successfully implementing the developed SERS method on real samples. [less ▲]

Detailed reference viewed: 99 (30 ULg)
Full Text
Peer Reviewed
See detailDevelopment of a simple approach for ultrasensitive detection of bisphenols by multiplexed surface enhanced Raman scattering
De Bleye, Charlotte ULg; Dumont, Elodie ULg; Netchacovitch, Lauranne ULg et al

Poster (2015, July 13)

A very simple, cheap and fast SERS method using functionalized silver nanoparticles was developed to detect bisphenols. This method was applied for the semi-quantitative detection of bisphenol A (BPA ... [more ▼]

A very simple, cheap and fast SERS method using functionalized silver nanoparticles was developed to detect bisphenols. This method was applied for the semi-quantitative detection of bisphenol A (BPA), bisphenol B (BPB) and bisphenol F (BPF) separately. Afterwards, a feasibility study of performing a multiplex SERS detection of BPA, BPB and BPF was successfully carried out. Finally, this developed method was applied on real samples which were solutions comprising cash receipts collected from different stores. [less ▲]

Detailed reference viewed: 73 (10 ULg)