References of "Rozet, Eric"
     in
Bookmark and Share    
Full Text
Peer Reviewed
See detailAnalytical Procedure Validation and the Quality by Design Paradigm
Rozet, Eric ULg; Rozet, Eric

in Journal of Biopharmaceutical Statistics (in press)

Since the adoption of the ICH Q8 document concerning the development of pharmaceutical processes following a Quality by Design (QbD) approach, there have been many discussions on the opportunity for ... [more ▼]

Since the adoption of the ICH Q8 document concerning the development of pharmaceutical processes following a Quality by Design (QbD) approach, there have been many discussions on the opportunity for analytical procedure developments to follow a similar approach. While development and optimization of analytical procedure following QbD principles have been largely discussed and described, the place of analytical procedure validation in this framework has not been clarified. This article aims at showing that analytical procedure validation is fully integrated into the QbD paradigm and is an essential step in developing analytical procedure that are effectively fit for purpose. Adequate statistical methodologies have also their role to play: such as design of experiments, statistical modelling and probabilistic statements. The outcome of analytical procedure validation is also an analytical procedure Design Space and from it, control strategy can be set. [less ▲]

Detailed reference viewed: 14 (1 ULg)
Full Text
Peer Reviewed
See detailEstimation of the Time Interval between the Administration of Heroin and the Sampling of Blood in Chronic Inhalers
DUBOIS, Nathalie ULg; HALLET, Claude ULg; SEIDEL, Laurence ULg et al

in Journal of Analytical Toxicology (2015)

To develop a model for estimating the time delay between last heroin consumption and blood sampling in chronic drug users. Eleven patients, all heroin inhalers undergoing detoxification, were included in ... [more ▼]

To develop a model for estimating the time delay between last heroin consumption and blood sampling in chronic drug users. Eleven patients, all heroin inhalers undergoing detoxification, were included in the study. Several plasma samples were collected during the detoxification procedure and analyzed for the heroin metabolites 6-acetylmorphine (6AM), morphine (MOR), morphine-6-glucuronide (M6G) and morphine-3-glucuronide (M3G), according to a UHPLC/MSMS method. The general linear mixed model was applied to time-related concentrations and a pragmatic four-step delay estimation approach was proposed based on the simultaneous presence of metabolites in plasma. Validation of the model was carried out using the jackknife technique on the 11 patients, and on a group of 7 test patients. Quadratic equations were derived for all metabolites except 6AM. The interval delay estimation was 2–4 days when only M3G present in plasma, 1–2 days when M6G and M3G were both present, 0–1 day when MOR, M6G and M3G were present and <2 h for all metabolites present. The ‘jackknife’ correlation between declared and actual estimated delays was 0.90. The overall precision of the delay estimates was 8–9 h. The delay between last heroin consumption and blood sampling in chronic drug users can be satisfactorily predicted from plasma heroin metabolites. [less ▲]

Detailed reference viewed: 24 (13 ULg)
Full Text
Peer Reviewed
See detailDesign Space for Analytical Methods: Why ? What ? How ?
Rozet, Eric ULg; Debrus, Benjamin ULg; Lebrun, Pierre ULg et al

Conference (2015, January 22)

Detailed reference viewed: 20 (1 ULg)
Full Text
Peer Reviewed
See detailTowards a full integration of optimization and validation phases: An Analytical-Quality-by-Design approach
Hubert, Cédric ULg; Houari, Sabah ULg; Rozet, Eric ULg et al

in Journal of Chromatography. A (2015)

When using an analytical method, defining an Analytical Target Profile (ATP) focused on quantitative performance represents a key input, and this will drive the method development process. In this context ... [more ▼]

When using an analytical method, defining an Analytical Target Profile (ATP) focused on quantitative performance represents a key input, and this will drive the method development process. In this context, two case studies were selected in order to demonstrate the potential of a Quality-by-Design (QbD) strategy when applied to two specific phases of the method lifecycle: the pre-validation study and the validation step. The first case study focused on the improvement of a Liquid Chromatography (LC) coupled to Mass Spectrometry (MS) stability-indicating method by the means of the QbD concept. The Design of Experiments (DoE) conducted during the optimization step (i.e. determination of the qualitative Design Space (DS)) was performed a posteriori. Additional experiments were performed in order to simultaneously conduct the pre-validation study to assist in defining the DoE to be conducted during the formal validation step. This predicted protocol was compared to the one used during the formal validation. A second case study based on the LC/MS-MS determination of glucosamine and galactosamine in human plasma was considered in order to illustrate an innovative strategy allowing the QbD methodology to be incorporated during the validation phase. An operational space, defined by the qualitative DS, was considered during the validation process rather than a specific set of working conditions as conventionally performed. Results of all the validation parameters conventionally studied were compared to those obtained with this innovative approach for glucosamine and galactosamine. Using this strategy, qualitative and quantitative information were obtained. Consequently, an analyst using this approach would be able to select with great confidence several working conditions within the operational space rather than a given condition for the routine use of the method. This innovative strategy combines both a learning process and a thorough assessment of the risk involved. [less ▲]

Detailed reference viewed: 8 (0 ULg)
Full Text
Peer Reviewed
See detailA quality by design approach for longitudinal quality attributes
Lebrun, Pierre ULg; Giacoletti, Katherine; Scherder, Tara et al

in Journal of Biopharmaceutical Statistics (2015), 25

The concept of quality by design (QbD) as published in ICH-Q8 is currently one of the most recurrent topics in the pharmaceutical literature. This guideline recommends the use of information and prior ... [more ▼]

The concept of quality by design (QbD) as published in ICH-Q8 is currently one of the most recurrent topics in the pharmaceutical literature. This guideline recommends the use of information and prior knowledge gathered during pharmaceutical development studies to provide a scientific rationale for the manufacturing process of a product and provide guarantee of future quality. This poses several challenges from a statistical standpoint and requires a shift in paradigm from traditional statistical practices. First, to provide “assurance of quality” of future lots implies the need to make predictions regarding the quality given past evidence and data. Second, the quality attributes described in the Q8 guidelines are not always a set of unique, independent measurements. In many cases, these criteria are com- plicated longitudinal data with successive acceptance criteria over a defined period of time. A common example is a dissolution profile for a modified or extended-release solid dosage form that must fall within acceptance limits at several time points. A Bayesian approach for longitudinal data obtained in various conditions of a design of experiment is provided to elegantly address the ICH-Q8 recommendation to provide assurance of quality and derive a scientifically sound design space. [less ▲]

Detailed reference viewed: 20 (3 ULg)
Full Text
Peer Reviewed
See detailAnalytical Procedure Validation and the Quality by Design Paradigm
Rozet, Eric ULg; Lebrun, Pierre ULg; Michiels, Jean-François et al

in Journal of Biopharmaceutical Statistics (2015), 25

Since the adoption of the ICH Q8 document concerning the development of pharmaceutical processes following a quality by design (QbD) approach, there have been many discussions on the opportunity for ... [more ▼]

Since the adoption of the ICH Q8 document concerning the development of pharmaceutical processes following a quality by design (QbD) approach, there have been many discussions on the opportunity for analytical procedure developments to follow a similar approach. While development and optimization of analytical procedure following QbD principles have been largely discussed and described, the place of analytical procedure validation in this framework has not been clarified. This article aims at showing that analytical procedure validation is fully integrated into the QbD paradigm and is an essential step in developing analytical procedures that are effectively fit for purpose. Adequate statistical methodologies have also their role to play: such as design of experiments, statistical modelling, and probabilistic statements. The outcome of analytical procedure validation is also an analytical procedure design space, and from it, control strategy can be set. [less ▲]

Detailed reference viewed: 21 (1 ULg)
Full Text
Peer Reviewed
See detailEvaluation of the quantitative performances of Supercritical Fluid Chromatography : from method development to validation
Dispas, Amandine ULg; Lebrun, Pierre ULg; Ziemons, Eric ULg et al

in Journal of Chromatography. A (2014), 1353(Method Validation), 78-88

Recently, the number of papers about SFC increased drastically but scientists did not truly focus their work on quantitative performances of this technique. In order to prove the potential of UHPSFC, the ... [more ▼]

Recently, the number of papers about SFC increased drastically but scientists did not truly focus their work on quantitative performances of this technique. In order to prove the potential of UHPSFC, the present work discussed about the different steps of the analytical life cycle of a method: from development to validation and application. Moreover, the UHPSFC quantitative performances were evaluated in comparison with UHPLC, which is the main technique used for quality control in the pharmaceutical industry and then could be considered as a reference. The methods were developed using Design Space strategy, leading to the optimization of robust method. In this context, when the Design Space optimization shows guarantee of quality, no more robustness study is required prior to the validation. Then, the methods were geometrically transferred in order to reduce the analysis time. The UHPSFC and UHPLC methods were validated based on the total error approach using accuracy profile. Even if UHPLC showed better precision and sensitivity, UHPSFC method is able to give accurate results in a dosing range larger than the 80–120% range required by the European Medicines Agency. Consequently, UHPSFC results are valid and could be used for the control of active substance in a finished pharmaceutical product. Finally, UHPSFC validated method was used to analyse real samples and gave similar results than the reference method (UHPLC). [less ▲]

Detailed reference viewed: 53 (22 ULg)
Full Text
Peer Reviewed
See detailINVESTIGATION OF TWO IMPROVED TRADITIONAL MEDICINES: DEVELOPMENT AND VALIDATION OF A LC-UV METHOD FOR THE DOSAGE OF A TRACER COMPOUND
Tshisekedi Tshibangu, Pascal; Kalenda Dibungi, Pascal; Rozet, Eric ULg et al

Poster (2014, June)

Detailed reference viewed: 31 (8 ULg)
Full Text
Peer Reviewed
See detailDevelopment of a liquid chromatographic method for thesimultaneous quantification of curcumin, -arteether,tetrahydrocurcumin and dihydroartemisinin. Application to lipid-based formulations
Memvanga Bondo, Patrick; Mbinze Kindenge, Jérémie ULg; Rozet, Eric ULg et al

in Journal of Pharmaceutical & Biomedical Analysis (2014), 88(-), 447-456

A liquid chromatographic method was developed for the simultaneous separation of curcumin, B-arteether, tetrahydrocurcumin and dihydroartemisinin based on the design of experiments and the design space ... [more ▼]

A liquid chromatographic method was developed for the simultaneous separation of curcumin, B-arteether, tetrahydrocurcumin and dihydroartemisinin based on the design of experiments and the design space methodology. The influence of the percentage of organic modifier, flow rate of the mobile phase and column temperature on the analytes separation was investigated. The optimal chromatographic separation was achieved on a C18 column (125 mm × 4 mm, 5 µm) using an isocratic elution with a mobile phase consisting of methanol:ammonium acetate (pH 4; 10 mM) (80/20, v/v) at a flow rate of 0.45 ml/min and a column temperature of 32.5◦C. This method was then validated for simultaneous quantification of curcumin and B -arteether contained in lipid-based formulations taking into account the B -expectation tolerance interval for the total error measurement. Finally, the suitability of the proposed liquid chromatographic method for routine analysis of curcumin and B -arteether loaded in lipid-based formulations has been proven. [less ▲]

Detailed reference viewed: 37 (13 ULg)
Full Text
Peer Reviewed
See detailImprovement of a stability-indicating method by Quality-by-Design versus Quality-by-Testing: A case of a learning process
Hubert, Cédric ULg; Lebrun, Pierre ULg; Houari, Sabah ULg et al

in Journal of Pharmaceutical & Biomedical Analysis (2014), 88

The understanding of the method is a major concern when developing a stability-indicating method and even more so when dealing with impurity assays from complex matrices. In the presented case study, a ... [more ▼]

The understanding of the method is a major concern when developing a stability-indicating method and even more so when dealing with impurity assays from complex matrices. In the presented case study, a Quality-by-Design approach was applied in order to optimize a routinely used method. An analytical issue occurring at the last stage of a long-term stability study involving unexpected impurities perturbing the monitoring of characterized impurities needed to be resolved. A compliant Quality-by-Design (QbD) methodology based on a Design of Experiments (DoE) approach was evaluated within the framework of a Liquid Chromatography (LC) method. This approach allows the investigation of Critical Process Parameters (CPPs), which have an impact on Critical Quality Attributes (CQAs) and, consequently, on LC selectivity. Using polynomial regression response modeling as well as Monte Carlo simulations for error propagation, Design Space (DS) was computed in order to determine robust working conditions for the developed stability-indicating method. This QbD compliant development was conducted in two phases allowing the use of the Design Space knowledge acquired during the first phase to define the experimental domain of the second phase, which constitutes a learning process. The selected working condition was then fully validated using accuracy profiles based on statistical tolerance intervals in order to evaluate the reliability of the results generated by this LC/ESI-MS stability-indicating method. A comparison was made between the traditional Quality-by-Testing (QbT) approach and the QbD strategy, highlighting the benefit of this QbD strategy in the case of an unexpected impurities issue. On this basis, the advantages of a systematic use of the QbD methodology were discussed. [less ▲]

Detailed reference viewed: 97 (18 ULg)
Full Text
Peer Reviewed
See detailQuantitative approaches based on Surface-Enhanced Raman Scattering (SERS) and Surface-Enhanced Raman Chemical Imaging (SER-CI)
De Bleye, Charlotte ULg; Sacre, Pierre-Yves ULg; Dumont, Elodie ULg et al

Conference (2014, January 20)

Surface-enhanced Raman scattering (SERS), discovered in 1978, is a recent technique enabling to circumvent the main limitations of classical Raman spectroscopy by dramatically exalting the Raman ... [more ▼]

Surface-enhanced Raman scattering (SERS), discovered in 1978, is a recent technique enabling to circumvent the main limitations of classical Raman spectroscopy by dramatically exalting the Raman scattering of the target molecules which are adsorbed or very closed to metallic surfaces while reducing the fluorescence impact on spectra [1]. This technique combines the sensitivity of the fluorescence keeping the structural information of molecules obtained from the SERS spectrum [2]. This last point allows to implement multiplex analyses. Moreover, it is possible to perform Surface-enhanced Raman chemical imaging (SER-CI) analyses which enable to acquire a visual representation of samples combining spectral and spatial measurements. Therefore SERS could become an attractive technique in numerous fields such as pharmaceutical and biomedical research. In this context, the feasibility of developing quantitative approaches using SERS and SER-CI on a pharmaceutical model was studied. The aim was to develop methods allowing the quantification of 4-aminophenol (4-AP) in a pharmaceutical formulation based on paracetamol. 4-AP is the main impurity of paracetamol and is actively research because of its toxicity. This pharmaceutical model was first investigated using SERS and a quantitative method enabling to quantify 4-AP from 3 to15 µg/mL was developed and validated using the standard addition method as a calibration method [3]. From these results, the possibility of developing a quantitative approach using SER-CI was investigated. Tablets based on paracetamol comprising different concentrations of 4-AP were prepared. Different ways to cover the sample surface by the SERS substrate were tested and a homogeneity study was performed to improve the repeatability of SER-CI analyses. Different spectral intensity normalizations were also tested in order to optimize the SER-CI method. Finally, a quantitative approach using SER-CI was developed allowing the quantification of 4-AP from 0.025% to 0.2% (w/w) in paracetamol tablets [4]. This first quantitative approach could pave the way to quantitative analysis of small molecules using SER-CI in complex matrices. References [1] P.L. Stiles, J.A. Dieringer, N.C. Shah, R.P. Van Duyne, Annu. Rev. Anal. Chem. 1 (2008) 601-626. [2] R.F. Aroca, R.A. Alvarez-Puebla, N. Pieczonka, S. Sanchez-Cortez, J.V. Garcia-Ramos, Adv. Colloid Interface Sci. 116 (2005) 45-61. [3] C. De Bleye, E. Dumont, E. Rozet, P.-Y. Sacré, P.-F. Chavez, L. Netchacovitch, G. Piel, Ph. Hubert, E. Ziemons, Talanta 116 (2013) 899-905. [4] C. De Bleye, P.-Y. Sacré, E. Dumont, L. Netchacovitch, P.-F. Chavez, G. Piel, P. Lebrun, Ph. Hubert, E. Ziemons, J. Pharm. Biomed. Anal. (in Press) [less ▲]

Detailed reference viewed: 158 (6 ULg)
Full Text
Peer Reviewed
See detailAn Easy, Convenient Cell and Tissue Extraction Protocol for Nuclear Magnetic Resonance Metabolomics.
Matheus, Nicolas ULg; Hansen, Sylvain ULg; Rozet, Eric ULg et al

in Phytochemical analysis : PCA (2014)

INTRODUCTION: As a complement to the classic metabolomics biofluid studies, the visualisation of the metabolites contained in cells or tissues could be a very powerful tool to understand how the local ... [more ▼]

INTRODUCTION: As a complement to the classic metabolomics biofluid studies, the visualisation of the metabolites contained in cells or tissues could be a very powerful tool to understand how the local metabolism and biochemical pathways could be affected by external or internal stimuli or pathologies. Therefore, extraction and/or lysis is necessary to obtain samples adapted for use with the current analytical tools (liquid NMR and MS). These extraction or lysis work-ups are often the most labour-intensive and rate-limiting steps in metabolomics, as they require accuracy and repeatability as well as robustness. Many of the procedures described in the literature appear to be very time-consuming and not easily amenable to automation. OBJECTIVE: To find a fast, simplified procedure that allows release of the metabolites from cells and tissues in a way that is compatible with NMR analysis. METHODS: We assessed the use of sonication to disrupt cell membranes or tissue structures. Both a vibrating probe and an automated bath sonicator were explored. RESULTS: The application of sonication as the disruption procedure led to reproducible NMR spectral data compatible with metabolomics studies. This method requires only a small biological tissue or cell sample, and a rapid, reduced work-up was applied before analysis. The spectral patterns obtained are comparable with previous, well-described extraction protocols. CONCLUSION: The rapidity and the simplicity of this approach could represent a suitable alternative to the other protocols. Additionally, this approach could be favourable for high- throughput applications in intracellular and intratissular metabolite measurements. Copyright (c) 2014 John Wiley & Sons, Ltd. [less ▲]

Detailed reference viewed: 69 (21 ULg)
Full Text
Peer Reviewed
See detailRobust method optimization strategy – a useful tool for method transfer: the case of SFC
Dispas, Amandine ULg; Lebrun, Pierre ULg; Andri, Bertyl ULg et al

in Journal of Pharmaceutical & Biomedical Analysis (2014), 88

The concept of Quality by Design (QbD) is now well established in pharmaceutical industry and should be applied to the development of any analytical methods. In this context, the key concept of Design ... [more ▼]

The concept of Quality by Design (QbD) is now well established in pharmaceutical industry and should be applied to the development of any analytical methods. In this context, the key concept of Design Space (DS) was introduced in the field of analytical method optimization. In chromatographic words, the DS is the space of chromatographic conditions that will ensure the quality of peaks separation, thus DS is a zone of robustness. In the present study, the interest of robust method optimization strategy was investigated in the context of direct method transfer from sending to receiving laboratory. The benefit of this approach is to speed up the method life cycle by performing only one quantitative validation step in the final environment of method use. A Supercritical Fluid Chromatography (SFC) method previously developed was used as a case study in this work. Moreover, the interest of geometric transfer was investigated simultaneously in order to stress a little bit more the transfer exercise and, by the way, emphasize the additional benefit of DS strategy in this particular context. Three successful transfers were performed on two column geometries. In order to compare original and transferred methods, the observed relative retention times (RT) were modelled as a function of the predicted relative RT and of the method type (original or transferred). The observed relative RT of the original and transferred methods are not statistically different and thus the method transfer is successfully achieved thanks to the robust optimization strategy. Furthermore, the analytical method was improved considering analysis time (reduced five times) and peak capacity (increased three times). To conclude, the advantage of using a DS strategy implemented for the optimization and transfer of SFC method was successfully demonstrated in this work. [less ▲]

Detailed reference viewed: 70 (20 ULg)
Full Text
Peer Reviewed
See detailA new criterion to assess distributional homogeneity in hyperspectral images of solid pharmaceutical dosage forms
Sacre, Pierre-Yves ULg; Lebrun, Pierre ULg; Chavez, Pierre-François ULg et al

in Analytica Chimica Acta (2014), 818

During galenic formulation development, homogeneity of distribution is a critical parameter to check since it may influence activity and safety of the drug. Raman hyperspectral imaging is a technique of ... [more ▼]

During galenic formulation development, homogeneity of distribution is a critical parameter to check since it may influence activity and safety of the drug. Raman hyperspectral imaging is a technique of choice for assessing the distributional homogeneity of compounds of interest. Indeed, the combination of both spectroscopic and spatial information provides a detailed knowledge of chemical composition and component distribution. Actually, most authors assess homogeneity using parameters of the histogram of intensities (e.g. mean, skewness and kurtosis). However, this approach does not take into account spatial information and loses the main advantage of imaging. To overcome this limitation, we propose a new criterion: Distributional Homogeneity Index (DHI). DHI has been tested on simulated maps and formulation development samples. The distribution maps of the samples were obtained without validated calibration model since different formulations were under investigation. The results obtained showed a linear relationship between content uniformity values and DHI values of distribution maps. Therefore, DHI methodology appears to be a suitable tool for the analysis of homogeneity of distribution maps even without calibration during formulation development. [less ▲]

Detailed reference viewed: 43 (25 ULg)
Full Text
Peer Reviewed
See detailStrategies for Using the Sheep Ovarian Cortex as a Model in Reproductive Medicine
Fransolet, Maïté ULg; Labied, Soraya ULg; Henry, Laurie ULg et al

in PLoS ONE (2014), 9(3), 91073

Objective: To evaluate and compare the distribution and density of primordial follicles within a whole sheep ovary and to gain insight into how to overcome the impact of natural follicular heterogeneity ... [more ▼]

Objective: To evaluate and compare the distribution and density of primordial follicles within a whole sheep ovary and to gain insight into how to overcome the impact of natural follicular heterogeneity on the experimental results. Design: Histological study. Setting: Academic research center. Animals: Five- to nine-month-old ewes. Interventions: Freshly sampled whole sheep ovaries were collected and prepared for histological analysis. Main Outcome Measure(s): The follicular densities and distributions were determined for hematoxylin and eosin sections. A mathematical model was derived based on the follicle counts and Monte-Carlo simulations. Results: Heterogeneous distributions and densities of primordial follicles were identified 1) for distinct areas of the same ovarian cortex, 2) between the ovaries of the same animal and 3) across different ewes. A mathematical model based on the analysis of 37,153 primordial follicles from 8 different ovaries facilitated the estimation of the number of cortical biopsies and sections that had to be analyzed to overcome such heterogeneity. Conclusion: The influence of physiological follicular heterogeneity on experimental and clinical results can be overcome when a definite number of cortical pieces and sections are taken into consideration. [less ▲]

Detailed reference viewed: 15 (6 ULg)
Full Text
Peer Reviewed
See detailDetermination of 4-aminophenol in a pharmaceutical formulation using Surface Enhanced Raman scattering: from development to method validation
De Bleye, Charlotte ULg; Dumont, Elodie ULg; Rozet, Eric ULg et al

in Talanta (2013), 116

A Surface Enhanced Raman Scattering (SERS) method able to quantify 4-aminophenol in a pharmaceutical formulation based on acetaminophen, also called paracetamol, was developed and, for the first time ... [more ▼]

A Surface Enhanced Raman Scattering (SERS) method able to quantify 4-aminophenol in a pharmaceutical formulation based on acetaminophen, also called paracetamol, was developed and, for the first time, successfully validated. In this context, silver nanoparticles were synthesized according to the method described by Lee-Meisel and used as SERS substrate. The repeatability of the silver colloid synthesis was tested using different methods to characterise the size and the zeta potential of silver nanoparticles freshly synthesized. To optimize the SERS samples preparation, a design of experiments implicating concentrations of citrate-reduced silver nanoparticles and aggregating agent was performed in order to maximize the Raman signal enhancement. Finally, an approach based on tolerance intervals and accuracy profiles was applied in order to thoroughly validate the method in a range of concentrations comprised from 3 to 15 µg mL-1 using normalized band intensities. The standard addition method was selected as method calibration. Therefore, measurements were carried out on 4-aminophenol spiked solutions of the pharmaceutical formulation. Despite the well-known stability and reproducibility problems of SERS, the validation was performed using two operators and 5 batches of nanoparticles, one for each validation day. [less ▲]

Detailed reference viewed: 82 (50 ULg)
Full Text
See detailValidation data treatment
Marini Djang'Eing'A, Roland ULg; Rozet, Eric ULg; Hubert, Philippe ULg

Learning material (2013)

-

Detailed reference viewed: 185 (85 ULg)
Full Text
Peer Reviewed
See detailApplication of an innovative design space optimization strategy to thedevelopment of LC methods for the simultaneous screening of antibiotics to combat poor quality medicines
Mbinze Kindenge, Jérémie ULg; Dispas, Amandine ULg; Lebrun, Pierre ULg et al

in Journal of Pharmaceutical & Biomedical Analysis (2013), 85

The poor quality of medicines is a crucial problem of public health. Therefore, it is important to haveanalytical tools to attend decisions of the legal authorities while combating this offense. In this ... [more ▼]

The poor quality of medicines is a crucial problem of public health. Therefore, it is important to haveanalytical tools to attend decisions of the legal authorities while combating this offense. In this context,the main objective of this study was to develop generic methods able to trace, screen and determineseveral antibiotics and common associated molecules by mean of liquid chromatographic techniques.For that purpose, an innovative Design Space optimization strategy was applied, targeting 16 antibioticsand 3 beta-lactamase inhibitors. The robustness of the developed method allowed using its use in anenvironment where operational factors such as temperature are not easy to control and eased its trans-fer to Ultra High Performance Liquid Chromatography. To demonstrate its ability to quantify the targetedmolecules, the developed and transferred method was fully validated for two active ingredients com-monly used in association, sulbactam and ceftriaxone, using the accuracy profile as decision tool. Basedon this successful step, the method was then used for the quantitative determination of these two activeingredients in three pharmaceutical brands marketed in the Democratic Republic of Congo. Two out ofthe three pharmaceutical products did not comply with the specifications [less ▲]

Detailed reference viewed: 70 (27 ULg)