References of "Pirard, Sophie"
     in
Bookmark and Share    
Full Text
Peer Reviewed
See detailDevelopment by the sol–gel process of highly dispersed Ni–Cu/SiO2 xerogel catalysts for selective 1,2-dichloroethane hydrodechlorination into ethylene
Pirard, Sophie ULg; Mahy, Julien ULg; Pirard, Jean-Paul ULg et al

in Microporous and Mesoporous Materials (in press)

Ni–Cu/SiO2 xerogel catalysts have been synthesized by cogelation of industrial tetraethoxysilane (Dynasil) and chelates of Ni and Cu with industrial 3-(2-aminoethylamino)propyltrimethoxysilane (Dynasylan ... [more ▼]

Ni–Cu/SiO2 xerogel catalysts have been synthesized by cogelation of industrial tetraethoxysilane (Dynasil) and chelates of Ni and Cu with industrial 3-(2-aminoethylamino)propyltrimethoxysilane (Dynasylan DAMO) in industrial ethanol denatured with diethyl phthalate. Despite the use of industrial grade reagents, highly dispersed bimetallic Ni–Cu/SiO2 xerogel catalysts were obtained. These samples are composed of completely accessible Ni–Cu alloy crystallites with sizes of 1.6–3.4 nm located inside silica particles exhibiting a monodisperse microporous distribution. It appears that the bimetallic complex acts as a nucleation agent in the formation of silica particles. The combination of results obtained from the calculation of the metal ratio in catalysts, H2 chemisorption and transmission electron microscopy allowed calculating the surface composition of the nickel–copper particles in Ni–Cu/SiO2 cogelled xerogel catalysts. Values obtained indicate a very pronounced surface enrichment with copper. While 1,2-dichloroethane hydrodechlorination over pure nickel mainly produces ethane, increasing copper content in bimetallic catalysts results in an increase in ethylene selectivity. The specific consumption rate of 1,2-dichloroethane decreases when copper loading increases. The turnover frequency, that is, the number of catalytic cycle per active site (nickel atom and its surrounding copper atoms) and per second, seems to be independent of surface composition of alloy particles. [less ▲]

Detailed reference viewed: 66 (8 ULg)
Full Text
Peer Reviewed
See detailHow to correctly determine the kinetics of a photocatalytic degradation reaction?
Pirard, Sophie ULg; Malengreaux, Charline ULg; Toye, Dominique ULg et al

in Chemical Engineering Journal (2014), 249

Detailed reference viewed: 25 (8 ULg)
Full Text
Peer Reviewed
See detailP-doped titania xerogels as efficient UV-visible photocatalysts
Bodson, Céline ULg; Pirard, Sophie ULg; PIRARD, Arlette ULg et al

in Journal of Materials Science and Chemical Engineering (2014), 2

In the present study, sol-gel process is used to synthesize P-doped TiO2 xerogels by the cogelation method of a functionalized P alkoxide, (NH2-(CH2)2-NH-(CH2)2-P(O)-(OC2H5)2) with Ti(OC3H7)4 in either 2 ... [more ▼]

In the present study, sol-gel process is used to synthesize P-doped TiO2 xerogels by the cogelation method of a functionalized P alkoxide, (NH2-(CH2)2-NH-(CH2)2-P(O)-(OC2H5)2) with Ti(OC3H7)4 in either 2-methoxyethanol or isopropanol. The phosphorus-doping improved the thermal stability of titania and decreased the phase transformation of anatase into rutile. This modification by phosphorus shifted the absorption edge of titania to the visible region as proved by Diffuse reflectance measurements, and thus offers the possibility to produce visible light effective TiO2 photocatalyst. The excellent photocatalytic activity of P-doped TiO2 xerogels compared to pure TiO2 could be explained by its high surface area and small TiO2-anatase crystallite size. From these results, it was proved by using three different models that phosphorus intrinsically influences the photocatalytic activity. [less ▲]

Detailed reference viewed: 13 (1 ULg)
Full Text
Peer Reviewed
See detailPhotocatalytic degradation of water pollutants with visible light-sensitized TiO2 xerogels
Tasseroul, Ludivine ULg; Pirard, Sophie ULg; Lambert, Stéphanie ULg et al

in Récents Progrès en Génie des Procédés (2014), 106

To extend its photocatalytic activity to visible light, TiO2 has been doped in situ through the cogelation sol-gel proces with two dyes : free metal tetra(4-carboxyphenyl)porphyrin and nickel tetra(4 ... [more ▼]

To extend its photocatalytic activity to visible light, TiO2 has been doped in situ through the cogelation sol-gel proces with two dyes : free metal tetra(4-carboxyphenyl)porphyrin and nickel tetra(4-carboxyphenyl)porphyrin. DR and FT-IR spectroscopies have been performed to determine the interaction between porphyrins and TiO2. Cristallinity and specific surface area have been measured by XRD and N2 adsorption. The photoactivity of the doped TiO2 xerogels has been evaluated for p-nitrophenol (a model water pollutant) degradation under visible light and a kinetic study has been performed. The samples allow the degradation of 40% of p-nitrophenol in 6 h which makes them very promising for water decontamination under natural light. A kinetic study of p-nitrophenol degradation with the Ni-doped catalyst has shown that the best kinetic model involves one type of active site corresponding to the hole h+ of electron-hole pairs created at the TiO2 surface by light. The rate determining step consists of the surface reaction between adsorbed p-nitrophenol and adsorbed OH• radicals. [less ▲]

Detailed reference viewed: 36 (8 ULg)
Full Text
Peer Reviewed
See detailKinetic study of 4-nitrophenol photocatalytic degradation over a Zn2+ doped TiO2 catalyst prepared through an environmentally friendly aqueous sol–gel process
Malengreaux, Charline ULg; Pirard, Sophie ULg; Bartlett, John et al

in Chemical Engineering Journal (2014), 245

A kinetic study of the photocatalytic degradation of 4-nitrophenol (4-NP) under UV–visible light (330 nm < k < 800 nm) has been performed via a rigorous chemical engineering approach over a Zn2+ doped ... [more ▼]

A kinetic study of the photocatalytic degradation of 4-nitrophenol (4-NP) under UV–visible light (330 nm < k < 800 nm) has been performed via a rigorous chemical engineering approach over a Zn2+ doped TiO2 catalyst prepared through an environmentally friendly aqueous sol–gel process. The experiments have been performed at three temperatures to enable the global activation energy to be estimated. The influence of the illumination intensity has also been considered. The possibility of internal and external diffusion limitations has been studied and the results obtained demonstrated that there is no diffusional limitation during the photocatalytic degradation of the 4-NP using the selected catalyst. Therefore, the apparent specific reaction rate measured corresponds to the actual reaction rate of the chemical reaction. Parameter adjustments show that the kinetic model that provides the best fit to the experimental data corresponds to a first order reaction. A sequence of elementary steps has been considered and a pseudo-steady state approach based upon the stationary state hypothesis for reaction intermediates has been applied to obtain a kinetic rate expression in agreement with the experimental data. The mean values of the reaction rate constant found at 283 K, 288 K and 293 K are respectively equal to k1 = 0.094 ± 0.003 m3 h- 1 kgcatalyst- 1; k2 = 0.119 ± 0.004 m3 h- 1 kgcatalyst- 1 and k3 = 0.150 ± 0.023 m3 h- 1 kg catalyst-1 and the global activation energy of the degradation reaction was evaluated as 40 kJ mol-1. A phenomenological kinetic mechanism is proposed to describe the reaction at a molecular scale. Finally, statistical validations and residuals analysis have been performed to confirm that the first order model is suitable to represent the 4-NP photocatalytic degradation over time. Such studies are essential to design a reactor for water pollutant degradation on an industrial scale. [less ▲]

Detailed reference viewed: 32 (12 ULg)
See detailPhysico-chemical properties and photocatalytic activity of P/Ag-doped TiO2 xerogels
Bodson Céline; Pirard, Sophie ULg; Pirard René et al

Conference (2013, July)

Detailed reference viewed: 15 (4 ULg)
See detailTernary LLE for systems composed of Biofuel Blends and Water
Pirard, Sophie ULg; Dechambre, Dominique; Greiner, Lasse et al

Conference (2013, May 29)

Detailed reference viewed: 12 (0 ULg)
Peer Reviewed
See detailPhysico-chemical properties and photocatalytic activity of calcined P-doped and P/Ag-doped TiO2 xerogels
Bodson, Céline; Pirard, Sophie ULg; Pirard, René ULg et al

Conference (2013, March 05)

Detailed reference viewed: 31 (1 ULg)
Peer Reviewed
See detailBiokraftstoffe der 2. Generation und Wasser: Automatisierte Untersuchung der Löslichkeiten
Pirard, Sophie ULg; Dechambre, Dominique; Pauls, Christophe et al

Conference (2013)

Detailed reference viewed: 15 (0 ULg)
Peer Reviewed
See detailCarbon nanotube synthesis by CCVD process: kinetic study on a Ni-Mo/MgO catalyst
Douven, Sigrid ULg; Pirard, Sophie ULg; Chan, Fang-Yue et al

Poster (2012, October)

Detailed reference viewed: 10 (0 ULg)
Peer Reviewed
See detailSynthèse de MWNT dans un réacteur continu incliné rotatif à lit mobile par procédé CCVD
Douven, Sigrid ULg; Pirard, Sophie ULg; Chan, Fang-Yue et al

Conference (2012, October)

Detailed reference viewed: 29 (8 ULg)