References of "Milis, Olivier"
     in
Bookmark and Share    
Full Text
Peer Reviewed
See detailQUASI-STATIC MECHANICAL BEHAVIOUR OF TI-6AL-4V ALLOY AT ROOM TEMPERATURE
Tuninetti Vásquez, Victor ULg; Gilles, Gaëtan ULg; Milis, Olivier ULg et al

in Complas XII (2013), XII

In order to determine the mechanical behavior of a bulk TA6V alloy, a set of mechanical tests such as shear, compression, tensile monotonic tests, and tensile tests on notched samples are performed. The ... [more ▼]

In order to determine the mechanical behavior of a bulk TA6V alloy, a set of mechanical tests such as shear, compression, tensile monotonic tests, and tensile tests on notched samples are performed. The material is tested at constant strain rate. Full-field optical technique for displacement measurements and strain computation are used for all the experiments. Plastic anisotropy and tension–compression asymmetry are observed. The CPB06 [1] yield criterion adapted for hexagonal close packed (hcp) material is identified. The sensitivity of the material parameters on the identification method as well as the efficiency of the model to predict forces and displacement field are discussed. Validation is done by using Finite Element method (FEM) simulations and 3D Digital Image Correlation (3D-DIC) measurements on specimens with multi-axial stress and strain fields subjected to large deformation. [less ▲]

Detailed reference viewed: 93 (40 ULg)
Full Text
Peer Reviewed
See detailCompression test for plastic anisotropy characterization using optical full-field dis-placement measurement technique
Tuninetti Vásquez, Victor ULg; Gilles, Gaëtan ULg; Milis, Olivier ULg et al

in Steel Research International (2012)

In this work, a constitutive law, its identification and its validation for TA6V titanium alloy are presented. The material characteri-zation is achieved by quasi-static monotonic tensile and compression ... [more ▼]

In this work, a constitutive law, its identification and its validation for TA6V titanium alloy are presented. The material characteri-zation is achieved by quasi-static monotonic tensile and compression tests at several strain rates and in three orthogonal material orientations. Constitutive model as Johnson-Cook which describes the strain rate sensitivity of the plastic material response is used in order to identify the initial yield locus at a common strain rate (10-3 s-1). The macroscopic orthotropic yield criterion chosen is the well-known CPB06 proposed by Cazacu et al., which describes both the tension/compression asymmetry and the anisotropic behavior of hcp metals and alloys. Voce type isotropic hardening model is used for simplicity reasons. A compression test on ellipsoidal cross-section specimen is selected for validation purpose, where 3 Digital Image Correlation 3D systems are used in order to acquire the evolution of the full field displacement/strain during the test. Coulomb friction coefficient between the dies and the specimen is computed by means of inverse modelling. A good agreement on the prediction of the load as a function of axial displacement of the specimen is found. [less ▲]

Detailed reference viewed: 159 (97 ULg)