References of "Maire, Eric"
     in
Bookmark and Share    
Full Text
Peer Reviewed
See detailNumerical investigation and experimental validation of physically-based advanced GTN model for DP steels
Fansi Tchonko, Joseph ULg; Balan, Tudor; Lemoine, Xavier et al

in Materials Science & Engineering : A (2013), 569

This numerical investigation of an advanced Gurson-Tvergaard-Needleman (GTN) model is an extension of the original work of [Ben Bettaieb, M., Lemoine, X., Bouaziz, O., Habraken, A.-M., Duchêne, L ... [more ▼]

This numerical investigation of an advanced Gurson-Tvergaard-Needleman (GTN) model is an extension of the original work of [Ben Bettaieb, M., Lemoine, X., Bouaziz, O., Habraken, A.-M., Duchêne, L., Numerical modeling of damage evolution of DP steels on the basis of X-ray tomography measurements, Mechanics of Materials 43 (2011) 139-156]. The current damage model extends the previous version by integrating the three damage mechanisms: nucleation, growth and coalescence of voids. Physically-based void nucleation and growth laws are considered, including an effect of the kinematic hardening. [less ▲]

Detailed reference viewed: 65 (24 ULg)
See detailInfluence of Fiber Distribution and Grain Size on the Mechanical Behavior of Friction Stir Processed Mg-C Composites
Mertens, Anne ULg; Montrieux, Henri-Michel ULg; Lecomte-Beckers, Jacqueline ULg et al

Conference (2012, November 12)

Short C fibers-Mg matrix composites have been produced by friction stir processing sandwiches made of a layer of C fabric stacked between two sheets of either the ductile Mg alloy AZ31B, or of the less ... [more ▼]

Short C fibers-Mg matrix composites have been produced by friction stir processing sandwiches made of a layer of C fabric stacked between two sheets of either the ductile Mg alloy AZ31B, or of the less ductile alloy AZ91D, that is capable of age hardening. It has been shown that the choice of the optimal experimental parameters for the production of sound composites was strongly dependent on the nature of the matrix. 3D X-ray tomography reveals that the fibers orient along the onion rings and that they are more or less fragmented depending on the local shear stress during the process. The fiber volume fraction is increased when the nugget volume decreases in particular for the AZ91D base material and for a high advancing speed for the AZ31B base material. The fiber volume fraction influences directly the grain size, the hardness and the tensile properties of the composites. [less ▲]

Detailed reference viewed: 38 (7 ULg)
See detailComposite Manufacturing by Friction Stir Processing
Simar, Aude; de Meester, Bruno; Delannay, Francis et al

Conference (2012, October 29)

A new solid-state process developed recently on the same principles as Friction Stir Welding (FSW), Friction Stir Processing appear as a very promising technique for the production of metal matrix ... [more ▼]

A new solid-state process developed recently on the same principles as Friction Stir Welding (FSW), Friction Stir Processing appear as a very promising technique for the production of metal matrix composites and for tailoring materials properties. In the present work, this process has been applied to two different composite systems: (i) magnesium-matrix composites reinforced with carbon fibers, and (ii) copper-matrix composites reinforced with Y2O3 powder. Process optimization and mechanical properties of the composites are discussed in both systems. [less ▲]

Detailed reference viewed: 60 (4 ULg)
Full Text
Peer Reviewed
See detailApplication of an Advanced GTN Model
Fansi, Joseph; Habraken, Anne ULg; Balan, Tudor et al

Conference (2012)

Detailed reference viewed: 42 (15 ULg)