References of "Denis, Samuel"
     in
Bookmark and Share    
Full Text
Peer Reviewed
See detailDC and AC Shielding Properties of Bulk High-Tc Superconducting Tubes
Fagnard, Jean-François ULg; Denis, Samuel; Lousberg, Grégory ULg et al

in IEEE Transactions on Applied Superconductivity (2009), 19(3), 2905-2908

We have studied numerically and experimentally the magnetic flux penetration in high-Tc superconducting tube subjected to a uniform magnetic field parallel to its long axis. This study is carried in view ... [more ▼]

We have studied numerically and experimentally the magnetic flux penetration in high-Tc superconducting tube subjected to a uniform magnetic field parallel to its long axis. This study is carried in view of designing low-frequency magnetic shields by exploiting the diamagnetic properties of high-Tc superconducting ceramics. We have measured the field attenuation for applied magnetic fields in the frequency range 5 mHz-0.1 Hz by Hall probe measurements and at audio frequencies using a sensing coil. A simple 1D analysis using the Kim critical state model was found to be able to reproduce the experimental data satisfactorily. We have also determined the phase shift between the internal and the applied field both experimentally and numerically. Finally, we have studied the sweep rate dependence of the magnetic shielding properties, using data recorded either at several constant sweep rates dB/dt or at several AC fields of various amplitudes and frequencies. Both methods agree with each other and lead to a n -value of the E ~ J n law equal to ~ 40 at 77 K. [less ▲]

Detailed reference viewed: 142 (57 ULg)
Full Text
Peer Reviewed
See detailInfluence of thermal treatment on YBa2Cu3O7-x thick films prepared by electrophoretic deposition on Ni and Ag substrates
Dusoulier, Laurent; Denis, Samuel; Dirickx, Michel et al

in Materials Research Society Symposium Proceedings (2007), 1001E

We have studied the sintering parameters of YBa2Cu3O7-x (YBCO) coatings produced by electrophoretic deposition (EPD) on Ag and Ni substrates. The maximal sintering temperature is ~ 930°C due to partial ... [more ▼]

We have studied the sintering parameters of YBa2Cu3O7-x (YBCO) coatings produced by electrophoretic deposition (EPD) on Ag and Ni substrates. The maximal sintering temperature is ~ 930°C due to partial melting and chemical contamination for Ag and Ni substrates respectively. Increasing the sintering duration does not improve significantly the densification. When Ar sintering atmosphere is used, the coating density is strongly increased on Ag substrates while adhesion is poor on Ni substrates. The Ar-sintered YBCO coating deposited on planar Ag substrate displays a significant magnetic shielding effect for low frequency applied magnetic induction. [less ▲]

Detailed reference viewed: 13 (4 ULg)
Full Text
Peer Reviewed
See detailCharacterisation of the magnetic shielding properties of YBaCuO thick films prepared by electrophoretic deposition on silver substrates
Denis, Samuel; Grenci, G.; Dusoulier, Laurent et al

in Journal of Physics: Conference Series (2006), 43

This communication reports experimental results on the superconducting properties of YBaCuO thick films prepared by electrophoretic deposition on silver substrates. The magnetic shielding properties of ... [more ▼]

This communication reports experimental results on the superconducting properties of YBaCuO thick films prepared by electrophoretic deposition on silver substrates. The magnetic shielding properties of the coatings were characterised by various methods. First, the electrical resistance and the transport critical current density, Jc, were determined. Our coatings exhibit a superconducting transition at a temperature of 90 K. Next, shielding characterisations were carried out at 77 K for samples having either a slab or a cylindrical geometry. In both cases, the frequency of the applied magnetic field was 103 Hz; the field behind the shielding wall was measured by a pick-up coil connected to a lock-in amplifier. In the case of cylindrical samples and for an applied induction lower than 1 G, the field inside the shielding enclosure is reduced by a factor greater than 106 (i.e. 120 dB) with respect to the applied field. [less ▲]

Detailed reference viewed: 86 (48 ULg)
Full Text
Peer Reviewed
See detailYBa2Cu3O(7-delta) thick films on Ag prepared by the electrophoretic deposition technique
Dusoulier, Laurent; Denis, Samuel; Fagnard, Jean-François ULg et al

in Journal of Physics: Conference Series (2006), 43

YBa2Cu3O7-δ thick films have been deposited onto Ag substrates by the Electrophoretic Deposition (EPD) technique. Different microstructures and electrical behaviours were observed depending on the ... [more ▼]

YBa2Cu3O7-δ thick films have been deposited onto Ag substrates by the Electrophoretic Deposition (EPD) technique. Different microstructures and electrical behaviours were observed depending on the starting powder. Coatings prepared from commercial powder displayed significant porosity and the superconducting transition width was found to be magnetic-field dependent. Films produced from home-made coprecipitated powder are denser but contain some secondary phases. No dependence of the resistive transition as a function of magnetic field (H ≤ 20 Oe) was observed in that case. [less ▲]

Detailed reference viewed: 44 (8 ULg)