References of "Delafosse, Angélique"
     in
Bookmark and Share    
Full Text
Peer Reviewed
See detailInvestigating the effects of hydrodynamics and mixing on mass transfer through the free-surface in stirred tank bioreactors
de Lamotte, Anne ULiege; Delafosse, Angélique ULiege; Calvo, Sébastien ULiege et al

in Chemical Engineering Science (2017), 172

In stirred-tank bioreactors, flow structures of various length and time scales are implied in scalar transport phenomena, such as gas species transfer through the liquid free-surface and their ... [more ▼]

In stirred-tank bioreactors, flow structures of various length and time scales are implied in scalar transport phenomena, such as gas species transfer through the liquid free-surface and their homogenization in the bulk. A proper understanding of the underlying mechanisms, i.e. hydrodynamics, mixing and mass transfer, and of their interactions is required to design and develop reliable and efficient production-scale bioprocesses. The objective of the present work is to experimentally investigate the coupling between gas-liquid mass transfer of oxygen with mixing efficiency and circulation patterns inside an arbitrarily chosen stirred-tank configuration aerated through the liquid free-surface, a baffled 20 L-vessel agitated by two Rushton turbines. Based on global parameter values, the most appropriate rotating speed, N = 300 rpm, is selected in order to further study local hydrodynamic quantities using Particle Image Velocimetry (PIV), as well as mixing and mass transfer dynamics using Planar Laser-Induced Fluorescence (PLIF). The results obtained with these local experimental methods are analyzed in detail. Their averages are first successfully compared to global data. Statistical analysis of their spatial distributions show that large-scale flow patterns significantly influence mass transfer through the free-surface of the stirred tank. Even if global measurements show that global characteristic times for mixing and mass transfer differ by two orders of magnitude, local experimental characterization shows persistent vertical gradients of dissolved gas concentrations. So the dissolved gas concentration is not as perfectly uniform as one might expect. [less ▲]

Detailed reference viewed: 56 (17 ULiège)
See detailApproche par modèle de compartiments pour la modélisation des bioréacteurs
Delafosse, Angélique ULiege; Calvo, Sébastien ULiege; Toye, Dominique ULiege

Scientific conference (2017, November 09)

Detailed reference viewed: 8 (1 ULiège)
Peer Reviewed
See detailNew models to predict microcarriers just-suspended state in bioreactors for stem cell culture.
Loubière, Céline; Olmos, Eric; Guedon, Emmanuel et al

Conference (2017, October)

Detailed reference viewed: 150 (2 ULiège)
Full Text
Peer Reviewed
See detailNew models to predict microcarriers just-suspended state in bioreactors for stem cell culturel
Loubière, Céline; Olmos, Eric; Guedon, Emmanuel et al

Conference (2017, July)

Detailed reference viewed: 16 (0 ULiège)
Peer Reviewed
See detailNew models for predicting microcarrier just-suspended state in bioreactors
Loubière, Céline; Olmos, Eric; Guedon, Emmanuel et al

Poster (2017, May)

Detailed reference viewed: 14 (0 ULiège)
Full Text
Peer Reviewed
See detailEuler–Lagrange approach to model heterogeneities in stirred tank bioreactors – Comparison to experimental flow characterization and particle tracking
Delafosse, Angélique ULiege; Calvo, Sébastien ULiege; Collignon, Marie-Laure ULiege et al

in Chemical Engineering Science (2015), 134

The aim of this work is the validation of an Euler–Lagrange modeling approach coupling a CFD-based compartment model (Eulerian approach) and a stochastic model based on a Continuous-Time Markov Chain ... [more ▼]

The aim of this work is the validation of an Euler–Lagrange modeling approach coupling a CFD-based compartment model (Eulerian approach) and a stochastic model based on a Continuous-Time Markov Chain (Lagrangian approach). The turbulent flow structure and the mixing process in a bioreactor stirred by an axial Mixel TT impeller is characterized by PIV and tracer experiments. Comparison between experimental and numerical data shows that the CFD-based compartment model is able to reproduce accurately the spatial heterogeneities inside the bioreactor. The trajectory of a small tracer particle which perfectly follows the fluid flow is measured by optical trajectography. It is then simulated by a stochastic model which is either based on an homogeneous or on an inhomogeneous Continuous Time Markov Chain (CTMC). Comparison of residence and circulation time distributions in three zones defined inside the bioreactor shows that the inhomogeneous CTMC model predicts with an excellent accuracy the particle trajectories inside the bioreactor. The modeling approach proposed here could be an useful tool to design scale-down bioreactors in order to reproduce at lab-scale the stress levels encountered in large-scale production bioreactors and to characterize and compare different bioreactor configurations. [less ▲]

Detailed reference viewed: 69 (29 ULiège)
Full Text
Peer Reviewed
See detailSurface aeration in baffled stirred tanks: hydrodynamics, mixing and mass transfer characteristics
de Lamotte, Anne ULiege; Delafosse, Angélique ULiege; Calvo, Sébastien ULiege et al

Poster (2015, September)

Biotechnological and chemical processes often need a supply of gas for acceptable product formation. In some applications - where either gas requirements/reactor volumes are relatively low, or bubbles are ... [more ▼]

Biotechnological and chemical processes often need a supply of gas for acceptable product formation. In some applications - where either gas requirements/reactor volumes are relatively low, or bubbles are undesirable - aeration through the liquid free-surface is enough to meet the demand. In case of sparged stirred tanks, aeration through the liquid free-surface is a factor to be determined when scaling-up /down processes. Gas-liquid transfer is strongly influenced by the hydrodynamic conditions. Two phenomena, occurring at different scales, can be coupled in order to explain mass transfer : (i) circulation (macroscale) and (ii) mixing/homogenization (microscale). Mixing/homogenization takes into consideration the small eddies responsible for the rippled liquid free-surface and for the concentration gradients surrounding it. Circulation determines the fluid path across the reactor as well as its contribution of the surface aeration and leads to periodic and local deformation of the liquid free-surface. Circulation also accounts for the design of the reactor, where the scaling problems are focused. The objective of this work is to develop an experimental approach able to fully (global and local quantities) characterize a chosen agitation configuration in terms of hydrodynamics, mixing and transfer, in order to assess the capability of computational methods to predict gas-liquid mass transfer due to aeration through the liquid free-surface. [less ▲]

Detailed reference viewed: 110 (17 ULiège)
Peer Reviewed
See detailHydrodynamics, mixing and mass transfer in baffled stirred tanks
de Lamotte, Anne ULiege; Delafosse, Angélique ULiege; Calvo, Sébastien ULiege et al

in Proceedings of the 15th European Conference on Mixing (2015, June)

The present work presents CFD simulations of hydrodynamics, mixing and mass transfer in a surface-aerated baffled stirred tank. The modelling of the multiphase flow is realized via an Euler-Euler approach ... [more ▼]

The present work presents CFD simulations of hydrodynamics, mixing and mass transfer in a surface-aerated baffled stirred tank. The modelling of the multiphase flow is realized via an Euler-Euler approach. Three closure models are tested for the resolution of the RANS equations. When fully-developed flow field is reached, gas-liquid transfer is implemented with a local mass transfer coefficient estimated by the eddy cell model, and the temporal evolution of dissolved gas concentration is predicted.Hydrodynamic and mixing quantities as well as mass transfer parameters for the different turbulence models are compared with experimental data available for the same geometrical and operating features. A critical analysis of the prediction results allow to assess the models capabilities and to highlight the possible critical issues of the simulations. [less ▲]

Detailed reference viewed: 131 (29 ULiège)
Peer Reviewed
See detailVALIDATION OF AN EULER-LAGRANGE COMPARTMENT MODEL FOR THE DESIGN OF SCALE-DOWN BIOREACTOR USED IN ANIMAL CELL CULTURES
Delafosse, Angélique ULiege; Calvo, Sébastien ULiege; Collignon, Marie-Laure ULiege et al

in Proceeding of the 15th European Conference on Mixing (2015, June)

Detailed reference viewed: 14 (5 ULiège)
Full Text
Peer Reviewed
See detailHYDRODYNAMICS IN A DISPOSABLE RECTANGULAR PARALLELEPIPED STIRRED BIOREACTOR WITH ELLIPTIC PENDULUM MOTION PADDLE
Collignon, Marie-Laure ULiege; Droissart, Laurent; Delafosse, Angélique ULiege et al

in Biochemical Engineering Journal (2015), 93

Stainless steel bioreactors increasingly fall behind to their disposable counterparts in pharma research as they do not require cleaning or sterilization. This led company ATMI LifeSciences to develop the ... [more ▼]

Stainless steel bioreactors increasingly fall behind to their disposable counterparts in pharma research as they do not require cleaning or sterilization. This led company ATMI LifeSciences to develop the “Nucleo™”. Original in design, this disposable bioreactor comprises a rectangular parallelepiped plastic bag stirred by a paddle revolving in elliptic pendulum motion. Studies covering this bioreactor showed good homogeneity of culture medium as well as good productivity for animal cell cultures. To further explain these good performances, the flow inside the “Nucleo™” had to be resolved. This paper focuses on the mean flow description, computed from stereo-PIV measurements performed in 20 verticals covering the whole volume of a 50 dm3 Nucleo™ bioreactor. As the flow is already turbulent in the chosen agitation conditions, its dimensionless mean velocity field does not vary with the paddle rotational speed. Mean flow pattern exhibits an axial symmetry – same flow is observed in opposite quarters of the tank – and can be described as a three-dimensional helix coiled on itself to form a distorted horizontal torus which covers the whole tank volume. Mean velocity value is on average doubled in the cone swept by the paddle, and its two horizontal components are twice higher than its vertical ones. However, mean velocity remains significant everywhere and, in particular, no stagnant area is observed in tank corners. Our results thus confirm previous studies observations. [less ▲]

Detailed reference viewed: 80 (20 ULiège)
Full Text
Peer Reviewed
See detailCFD Comparison of hydrodynamics between BIOSTAT® Cultibag STR and standard Stirred Cell Culture Bioreactors
Calvo, Sébastien ULiege; Delafosse, Angélique ULiege; Crine, Michel ULiege et al

Poster (2014, September 10)

Single-use bioreactors have been increasingly used for animal cell cultures on microcarriers in screening experiments. Because of their manufacturing process, the shape of these kinds of vessels such as ... [more ▼]

Single-use bioreactors have been increasingly used for animal cell cultures on microcarriers in screening experiments. Because of their manufacturing process, the shape of these kinds of vessels such as the BIOSTAT® Cultibag STR one, is limited. For example, technical constraints on weld seams limit angles to 30° and no baffle may be installed. The shape of standard re-usable vessels may thus not be exactly reproduced and the flow structure may thus significantly differs from the flow structure in standard bioreactors. [less ▲]

Detailed reference viewed: 90 (18 ULiège)
Full Text
Peer Reviewed
See detailCFD-based Compartment model for description of mixing in bioreactors
Delafosse, Angélique ULiege; Calvo, Sébastien ULiege; Collignon, Marie-Laure ULiege et al

in Chemical Engineering Science (2014), 106

In most bioprocesses, it is fundamental to accurately predict the hydrodynamics behavior of bioreactors of different size and its interaction with the biological reaction. Computational Fluid Dynamics can ... [more ▼]

In most bioprocesses, it is fundamental to accurately predict the hydrodynamics behavior of bioreactors of different size and its interaction with the biological reaction. Computational Fluid Dynamics can provide detailed modeling about hydrodynamics and mixing. However, it is computationally intensive, especially when reactions are taken into account. Another way to predict hydrodynamics is the use of “Compartment” or “Network-of-zones” model which are much less demanding in computation time than CFD. However, compartments and fluxes between them are often defined by considering global quantities not representative of the flow complexity. To overcome the limitations of these two methods, a solution is to combine compartment modeling and CFD simulations. The aim of this study is to propose a compartment model where the flow rates between two adjacent compartments are easily computed from the velocity fields obtained by CFD. The mixing evolution predicted by the CFD-based compartment model have been then compared with mixing experiment results. Unlike a CFD mixing simulation and a classical compartment model, the CFD-based compartment model proposed in this work reproduces with a good accuracy the spatial distribution of concentrations during the mixing process and this, without any adjustable parameters. [less ▲]

Detailed reference viewed: 109 (36 ULiège)
Full Text
Peer Reviewed
See detailDéveloppement d'un dispositif de trajectographie optique nécessaire pour la caractérisation expérimentale par une approche Euler-Lagrange des écoulements dans des bioréacteurs à cuve agitée
Collignon, Marie-Laure ULiege; Delafosse, Angélique ULiege; Delvigne, Frank ULiege et al

in Récents Progrès en Génie des Procédés (2013, October)

Les bioréacteurs à cuve agitée sont des dispositifs largement utilisés dans l’industrie pharmaceutique. Les performances globales des cultures menées dans ces bioréacteurs dépendent fortement de ... [more ▼]

Les bioréacteurs à cuve agitée sont des dispositifs largement utilisés dans l’industrie pharmaceutique. Les performances globales des cultures menées dans ces bioréacteurs dépendent fortement de l’environnement physico-chimique et hydrodynamique local rencontré par les microorganismes et ce au cours du temps. Pour parvenir à caractériser cet historique de conditions locales rencontrées, une approche Euler-Lagrange doit être adoptée. La difficulté dans ce type d’approche est d’être capable de mesurer de manière fiable la trajectoire suivie par le microorganisme au sein du bioréacteur. Pour ce faire, le Laboratoire de Génie Chimique de l’Université de Liège a conçu un dispositif de trajectographie optique. L’objectif de cet article est de présenter ce dispositif, les développements qui ont été nécessaire à sa mise en œuvre et les résultats obtenus. Le dispositif se compose de deux caméras observant selon deux axes de l’espace un bioréacteur rétro-éclairé par des panneaux leds. La trajectoire suivie par une particule noire en gel d’alginate de calcium de 491 µm de diamètre est construite à partir des images acquises par ces deux caméras préalablement modélisée par un modèle pinhole et traitées par une approche rationnée. La validité des trajectoires mesurées a été prouvée dans un bioréacteur de 20 L mélangé par une hélice TTP en comparant les champs de vitesse moyen et d’énergie cinétique turbulent extraits de la trajectoire avec ceux obtenus par la technique eulérienne Stéréo P.I.V. La convergence de ces deux champs avec le temps d’acquisition de la trajectoire a également été démontrée. [less ▲]

Detailed reference viewed: 125 (37 ULiège)
Full Text
Peer Reviewed
See detailCaractérisation expérimentale et modélisation des conditions de mise en suspension homogène d’un solide dans une cuve agitée industrielle
Calvo, Sébastien ULiege; Delafosse, Angélique ULiege; Collignon, Marie-Laure ULiege et al

in Récents Progrès en Génie des Procédés (Cd-ROM) (2013, September)

In this work, we study the conditions needed to reach homogeneous distribution of solid particles of aluminium salts in water inside a GRC bottom shape stirred tank of 70L equipped with Pfaudler RCI type ... [more ▼]

In this work, we study the conditions needed to reach homogeneous distribution of solid particles of aluminium salts in water inside a GRC bottom shape stirred tank of 70L equipped with Pfaudler RCI type impeller and three equispaced vertical baffles. The aim of the present study is to develop a CFD model describing the quality of particle distribution at the industrial scale. This model, validated with experimental data, is afterward used to developed scale-up and scale-down correlation to predict the minimum impeller speed needed to reach homogeneous solid distribution Nhs. The commercial CFD tool Fluent 14 is used to model the fluid flow and the solid particle distribution in the tank. The 3D geometry of the tank and the associated mesh are realized respectively by Ansys 14 DesignModeler and Meshing. The Sliding-Mesh approach is used to take into account the impeller motion. Assuming that only the continuous phase is present, the fluid flow dynamics may be simulated independently using the wellknown k-ε turbulence model. The behaviour of the liquid-solid mixture is then described implementing the Eulerian Mixture model. Liquid velocity fields simulated by CFD have been validated by comparison with PIV (Particle Image Velocimetry) measurements. Computed Nhs is well compared to experimental data obtained with a nephelometric probe. Results obtained at different scales allowed correlating Nhs and volumetric power consumption. [less ▲]

Detailed reference viewed: 94 (10 ULiège)
Full Text
Peer Reviewed
See detailExperimental characterisation and modelling of homogeneous solid suspension in an industrial stirred tank
Calvo, Sébastien ULiege; Delafosse, Angélique ULiege; Collignon, Marie-Laure ULiege et al

in Advances in Mechanical Engineering (2013), Volume 2013

In this work, we study the conditions needed to reach homogeneous distribution of aluminium salts particles in water inside a torispherical bottom shaped stirred tank of 70 L equipped with a Pfaudler RCI ... [more ▼]

In this work, we study the conditions needed to reach homogeneous distribution of aluminium salts particles in water inside a torispherical bottom shaped stirred tank of 70 L equipped with a Pfaudler RCI type impeller and three equispaced vertical baffles. The aim of the present study is to develop a CFD model describing the quality of particle distribution in industrial scale tanks. This model, validated with experimental data, is used afterwards to develop scale-up and scale-down correlations to predict the minimum impeller speed needed to reach homogeneous solid distribution Nhs.The commercial CFD software Fluent 14 is used to model the fluid flow and the solid particle distribution in the tank. Sliding Mesh approach is used to take the impeller motion into account. Assuming that the discrete solid phase has no influence on the continuous liquid phase behaviour, the fluid flow dynamics is simulated independently using the well-known k-ε turbulence model. The liquid-solid mixture behaviour is then described by implementing the Eulerian Mixture model. Computed liquid velocity fields are validated by comparison with PIV measurements. ComputedNhs were found to be in good agreement with experimental measurements. Results fromdifferent scales allowed correlating Nhs values to the volumetric power consumption. [less ▲]

Detailed reference viewed: 80 (19 ULiège)