References of "Aqil, Abdelhafid"
     in
Bookmark and Share    
Full Text
Peer Reviewed
See detailPhysicochemical properties of pH-controlled polyion complex (PIC) micelles of poly(acrylic acid)-based double hydrophilic block copolymers and various polyamines
Warnant, Jérôme; Marcotte, N.; Reboul, J. et al

in Analytical and Bioanalytical Chemistry (2012), 403

The physicochemical properties of polyion complex (PIC) micelles were investigated in order to characterize the cores constituted of electrostatic complexes of two oppositely charged polyelectrolytes. The ... [more ▼]

The physicochemical properties of polyion complex (PIC) micelles were investigated in order to characterize the cores constituted of electrostatic complexes of two oppositely charged polyelectrolytes. The pH-sensitive micelles were obtained with double hydrophilic block copolymers containing a poly(acrylic acid) block linked to a modified poly(ethylene oxide) block and various polyamines (polylysine, linear and branched polyethyleneimine, polyvinylpyridine, and polyallylamine). The pH range of micellization in which both components are ionized was determined for each polyamine. The resulting PIC micelles were characterized using dynamic light scattering and smallangle X-ray scattering experiments (SAXS). The PIC micelles presented a core–corona nanostructure with variable polymer density contrasts between the core and the corona, as revealed by the analysis of the SAXS curves. It was shown that PIC micelle cores constituted by polyacrylate chains and polyamines were more or less dense depending on the nature of the polyamine. It was also determined that the density of the cores of the PIC micelles depended strongly on the nature of the polyamine. These homogeneous cores were surrounded by a large hairy corona of hydrated polyethylene oxide block chains. Auramine O (AO) was successfully entrapped in the PIC micelles, and its fluorescence properties were used to get more insight on the core properties. Fluorescence data confirmed that the cores of such micelles are quite compact and that their microviscosity depended on the nature of the polyamine. The results obtained on these core–shell micelles allow contemplating a wide range of applications in which the AO probe would be replaced by various cationic drugs or other similarly charged species to form drug nanocarriers or new functional nanodevices. [less ▲]

Detailed reference viewed: 32 (2 ULg)
Full Text
See detailChitosan-based biomimetic scaffolds and methods for preparing the same
Filée, Patrick; Freichels, Astrid ULg; Jérôme, Christine ULg et al

Patent (2011)

The invention concerns chitosan-based biomimetic scaffolds and methods for modulating their intrinsic properties such as rigidity, elasticity, resistance to mechanical stress, porosity, biodegradation and ... [more ▼]

The invention concerns chitosan-based biomimetic scaffolds and methods for modulating their intrinsic properties such as rigidity, elasticity, resistance to mechanical stress, porosity, biodegradation and absorbance of exudates. Therefore, the present invention relates to a layered chitosan-based scaffold wherein said layered scaffold comprises at least two fused layers, wherein at least one layer consists of a chitosan nanofiber scaffold membrane and at least one of the other layers of a porous chitosan scaffold support layer. Moreover, the present invention provides a layered chitosan-based scaffold characterized by (i) a good adhesion between the porous and nanofiber layers, (ii) a tuneable porosity of the nanofiber layer by tuning the distance between the nanofibers, (iii) a stable nanofibers and porous morphology even when immersed in water or other solvents and a process for the preparation of such layered chitosan-based scaffold.Finally, the present invention provides the use of the layered electrospun chitosan-based scaffold of the invention or the layered electrospun chitosan-based scaffold produced by the process of the invention as a wound dressing, in tissue engineering or for biomedical applications. [less ▲]

Detailed reference viewed: 26 (5 ULg)
Full Text
See detailChitosan-based biomimetic scaffolds and methods for preparing the same
Filée, Patrice; Freichels, Astrid ULg; Jérôme, Christine ULg et al

Patent (2011)

The invention concerns chitosan biomimetic scaffolds and methods for modulating their intrinsic properties such as rigidity, elasticity, resistance to mechanical stress, porosity, biodegradation and ... [more ▼]

The invention concerns chitosan biomimetic scaffolds and methods for modulating their intrinsic properties such as rigidity, elasticity, resistance to mechanical stress, porosity, biodegradation and absorbance of exudates. Therefore, the present invention relates to a layered chitosan scaffold wherein said layered scaffold comprises at least two fused layers, wherein at least one of the fused layers comprises a chitosan nanofiber membrane and the other fused layer comprises a porous chitosan support layer. Moreover, the present invention provides a layered chitosan scaffold characterized by (i) a good adhesion between the porous and nanofiber layers, (ii) a tuneable porosity of the nanofiber layer by tuning the distance between the nanofibers, (iii) a stable nanofibers and porous morphology even when immersed in water or other solvents and a process for the preparation of such layered chitosan scaffold. Finally, the present invention provides the use of the layered electrospun chitosan scaffold of the invention or the layered electrospun chitosan scaffold produced by the process of the invention as a wound dressing, in tissue engineering or for biomedical applications. [less ▲]

Detailed reference viewed: 27 (1 ULg)
Full Text
Peer Reviewed
See detailCharged poly(D,L-lactide) nanofibers: towards customized surface properties
Croisier, Florence ULg; Aqil, Abdelhafid ULg; Malherbe, Cédric ULg et al

in Macromolecular Symposia (2011), 309/310(1), 20-27

Surface-charged nanofibers were prepared by electrospinning technique (ESP). For this purpose, a copolymer bearing carboxylic acid functions was added to a poly(D,L-lactide) solution just before ESP ... [more ▼]

Surface-charged nanofibers were prepared by electrospinning technique (ESP). For this purpose, a copolymer bearing carboxylic acid functions was added to a poly(D,L-lactide) solution just before ESP process. In a basic medium, negative charges were therefore revealed on fiber surface. By deposition of positively charged particles or polyelectrolytes, surface properties of the fibers could be tailor-made for a specific application. This versatile method can, for example, be applied to the preparation of new biomedical scaffolds. [less ▲]

Detailed reference viewed: 44 (17 ULg)
Full Text
See detailChitosan-based nanofibers for wound dressing
Aqil, Abdelhafid ULg; Tchemtchoua Tateu, Victor ULg; Colige, Alain ULg et al

Poster (2011, May 12)

Detailed reference viewed: 52 (6 ULg)
Full Text
Peer Reviewed
See detailEffect of non-ionic surfactant and acidity on chitosan nanofibers with different molecular weights
Ziani, Khalid; Henrist, Catherine ULg; Jerome, Christine et al

in Carbohydrate Polymers (2011), 83(2), 470-476

Detailed reference viewed: 57 (8 ULg)
Full Text
Peer Reviewed
See detailDevelopment of a Chitosan Nanofibrillar Scaffold for Skin Repair and Regeneration.
Tchemtchoua Tateu, Victor ULg; Atanasova, G.; Aqil, Abdelhafid ULg et al

in Biomacromolecules (2011), 12

The final goal of the present study was the development of a 3-D chitosan dressing that would shorten the healing time of skin wounds by stimulating migration, invasion, and proliferation of the relevant ... [more ▼]

The final goal of the present study was the development of a 3-D chitosan dressing that would shorten the healing time of skin wounds by stimulating migration, invasion, and proliferation of the relevant cutaneous resident cells. Three-dimensional chitosan nanofibrillar scaffolds produced by electrospinning were compared with evaporated films and freeze-dried sponges for their biological properties. The nanofibrillar structure strongly improved cell adhesion and proliferation in vitro. When implanted in mice, the nanofibrillar scaffold was colonized by mesenchymal cells and blood vessels. Accumulation of collagen fibrils was also observed. In contrast, sponges induced a foreign body granuloma. When used as a dressing covering full-thickness skin wounds in mice, chitosan nanofibrils induced a faster regeneration of both the epidermis and dermis compartments. Altogether our data illustrate the critical importance of the nanofibrillar structure of chitosan devices for their full biocompatibility and demonstrate the significant beneficial effect of chitosan as a wound-healing biomaterial. [less ▲]

Detailed reference viewed: 61 (24 ULg)
Full Text
Peer Reviewed
See detailNanostructured silica templated by double hydrophilic block copolymers with a comb-like architecture
Warnant, Jérôme ULg; Reboul, J.; Aqil, Abdelhafid ULg et al

in Powder Technology (2011), 208

An original way to synthesize nanostructured materials is the use of new structuring agents constituted of induced and reversible micelles of Double Hydrophilic Block Copolymers (DHBC). The present paper ... [more ▼]

An original way to synthesize nanostructured materials is the use of new structuring agents constituted of induced and reversible micelles of Double Hydrophilic Block Copolymers (DHBC). The present paper aims at showing that induced micelles can be obtained by complexation between a PAA-b-PAMPEO (DHBC) polymer containing a comb-type neutral block and a polyamine, that the micellization process is reversible as a function of the pH and finally, that the obtained polyion complex micelles can be successfully used in the preparation of well organized mesostructured silica materials. [less ▲]

Detailed reference viewed: 83 (18 ULg)
See detailElectrografting and LbL deposition for the elaboration of antimicrobial coatings
Aqil, Abdelhafid ULg; Cécius, Michaël; Jérôme, Christine ULg

Poster (2010, November 29)

Detailed reference viewed: 7 (0 ULg)
See detailChitosan nanofiber membranes for tissue engineering - synthesis, characterization and properties
Toncheva, Natalia ULg; Aqil, Abdelhafid ULg; Croisier, Florence ULg et al

Poster (2010, November 29)

This poster was presented by Natalia Toncheva

Detailed reference viewed: 48 (3 ULg)
See detailPreparation of cross-linked chitosan-based nanofibers as wound dressing
Aqil, Abdelhafid ULg; Ziani, K.; Tchemtchoua Tateu, Victor ULg et al

Poster (2009, November 18)

Detailed reference viewed: 51 (19 ULg)
Full Text
See detailDevelopment of multilayered chitosan-based nanofibers
Croisier, Florence ULg; Aqil, Abdelhafid ULg; Detrembleur, Christophe ULg et al

Poster (2009, June 14)

By combining electrospinning and layer-by-layer deposition techniques, new porous material scaffolds of multilayered, chitosan-based nanofibers were produced. Layer-by-layer (LBL) is a well-known method ... [more ▼]

By combining electrospinning and layer-by-layer deposition techniques, new porous material scaffolds of multilayered, chitosan-based nanofibers were produced. Layer-by-layer (LBL) is a well-known method for surface coating, based on electrostatic interactions. It enables the controllable deposition of a variety of polyelectrolytes including synthetic and natural materials, with designable layer structure, defined layer thickness and size. Electrospinning (ESP) allows the fabrication of polymer fibers ranging from nanometers to a few microns in diameter, depending on the polymer characteristics (a.o. molecular weight, solution viscosity and conductivity) and processing conditions (electric potential, distance between syringe-capillary and collection plate, concentration, flow rate). Mats of nanofibers produced by ESP display a very large surface area-to-volume ratio and high porosity with very small pore size. The nanometric scale of electrospun fibers also proves a positive effect on cellular growth, as fiber mats mimic extracellular matrix structure. The association of these two techniques with the use of biocompatible and biodegradable polymers such as chitosan, gives outstanding prospects in the field of biomedical applications, especially for the preparation of wound dressings, artificial skin or tissue engineering scaffolds. In the present study, a charged copolymer, poly(methylmethacrylate-block-methacrylic acid), was added to a poly(ε-caprolactone) or poly(D,L-lactide) solution before electrospinning in order to prepare surface charged nanofibers. Oppositely charged polyelectrolytes – chitosan and poly(styrene sulfonate) or hyaluronic acid – were then alternately deposited on these aliphatic polyester fiber “cores” using LBL method. The aliphatic polyester core was also removed selectively to confirm the growth of a multilayered shell, obtaining hollow fibers. [less ▲]

Detailed reference viewed: 62 (31 ULg)
Full Text
See detailDevelopment of multilayered chitosan-based nanofibers for tissue engineering
Croisier, Florence ULg; Aqil, Abdelhafid ULg; Detrembleur, Christophe ULg et al

Conference (2009, June 13)

By combining electrospinning and layer-by-layer deposition techniques, new porous material scaffolds of multilayered, chitosan-based nanofibers were produced. Layer-by-layer (LBL) is a well-known method ... [more ▼]

By combining electrospinning and layer-by-layer deposition techniques, new porous material scaffolds of multilayered, chitosan-based nanofibers were produced. Layer-by-layer (LBL) is a well-known method for surface coating, based on electrostatic interactions. It enables the controllable deposition of a variety of polyelectrolytes including synthetic and natural materials, with designable layer structure, defined layer thickness and size. Electrospinning (ESP) allows the fabrication of polymer fibers ranging from nanometers to a few microns in diameter, depending on the polymer characteristics (a.o. molecular weight, solution viscosity and conductivity) and processing conditions (electric potential, distance between syringe-capillary and collection plate, concentration, flow rate). Mats of nanofibers produced by ESP display a very large surface area-to-volume ratio and high porosity with very small pore size. The nanometric scale of electrospun fibers also proves a positive effect on cellular growth, as fiber mats mimic extracellular matrix structure. The association of these two techniques with the use of biocompatible and biodegradable polymers such as chitosan, gives outstanding prospects in the field of biomedical applications, especially for the preparation of wound dressings, artificial skin or tissue engineering scaffolds. In the present study, a charged copolymer, poly(methylmethacrylate-block-methacrylic acid), was added to a poly(ε-caprolactone) or poly(D,L-lactide) solution before electrospinning in order to prepare surface charged nanofibers. Oppositely charged polyelectrolytes – chitosan and poly(styrene sulfonate) or hyaluronic acid – were then alternately deposited on these aliphatic polyester fiber “cores” using LBL method. The aliphatic polyester core was also removed selectively to confirm the growth of a multilayered shell, obtaining hollow fibers. [less ▲]

Detailed reference viewed: 63 (18 ULg)
Full Text
See detailLayer-by-layer self-assembled chitosan coating on electrospun nanofibers
Croisier, Florence ULg; Aqil, Abdelhafid ULg; Detrembleur, Christophe ULg et al

Poster (2009, April)

By combining electrospinning technique and layer-by-layer deposition, we produced a new material made of multilayered, chitosan-based nanofibers. Layer-by-layer (LBL) is a well-known method for surface ... [more ▼]

By combining electrospinning technique and layer-by-layer deposition, we produced a new material made of multilayered, chitosan-based nanofibers. Layer-by-layer (LBL) is a well-known method for surface coating, based on electrostatic interactions. It enables the controllable deposition of a variety of polyions including synthetic and natural materials, with designable layer structure, defined wall thickness and size. Electrospinning (ESP) technique allows the fabrication of polymer fibers ranging from nanometers to a few microns in diameter, depending on the polymer characteristics (a.o. molecular weight, solution viscosity and conductivity) and processing conditions (electric potential, distance between syringe-capillary and collection plate, concentration, flow rate). Mats of nanofibers produced by ESP display a very large surface area-to-volume ratio and high porosity with very small pore size. The nanometric scale of electrospun fibers also proves a positive effect on cellular growth, as fibers mats mimic extracellular matrix structure. The association of these two techniques with the use of biocompatible and biodegradable polymers such as chitosan, gives outstanding prospects in the field of biomedical applications, especially for the preparation of wound dressings, artificial skin or tissue engineering scaffolds. In the present study, a charged copolymer, poly(methylmethacrylate-block-methacrylic acid), was added to a poly(ε-caprolactone) or poly(D,L-lactide) solution before electrospinning in order to obtain charges on fibers surface. Oppositely charged polyelectrolytes – chitosan and poly(styrene sulfonate) or hyaluronic acid – were then alternately deposited on these aliphatic polyester fiber “cores” using LBL method. The aliphatic polyester core was also removed selectively to confirm the existence of a multilayered shell, obtaining hollow fibers. [less ▲]

Detailed reference viewed: 190 (18 ULg)
Full Text
See detailPreparation of multilayered chitosan-based nanofibers by combination of electrospinning and layer-by-layer deposition techniques
Croisier, Florence ULg; Aqil, Abdelhafid ULg; Detrembleur, Christophe ULg et al

Poster (2009, March)

By combining electrospinning technique and layer-by-layer deposition, we produced a new material made of multilayered, chitosan-based nanofibers. Layer-by-layer (LBL) is a well known method for surface ... [more ▼]

By combining electrospinning technique and layer-by-layer deposition, we produced a new material made of multilayered, chitosan-based nanofibers. Layer-by-layer (LBL) is a well known method for surface coating, based on electrostatic interactions. It enables the controllable deposition of a variety of polyions including synthetic and natural materials, with designable layer structure, defined wall thickness and size. Electrospinning (ESP) technique allows the fabrication of polymer fibers ranging from nanometers to a few microns in diameter, depending on the polymer characteristics (a.o. molecular weight, solution viscosity and conductivity) and processing conditions (electric potential, distance between syringe-capillary and collection plate, concentration, flow rate) (3). Mats of nanofibers produced by ESP display a very large surface area-to-volume ratio and high porosity with very small pore size. The nanometric scale of electrospun fibers also proves a positive effect on cellular growth, as fibers mats mimic extracellular matrix structure. The association of these two techniques with the use of biocompatible and biodegradable polymers such as chitosan, gives outstanding prospects in the field of biomedical applications, especially for the preparation of wound dressings, artificial skin or tissue engineering scaffolds. In the present study, a charged copolymer, poly(methylmethacrylate-block-methacrylic acid), was added to a poly(ε-caprolactone) or poly(D,L-lactide) solution before electrospinning in order to obtain charges on fibers surface. Oppositely charged polyelectrolytes – chitosan and poly(styrene sulfonate) or hyaluronic acid – were then alternately deposited on these aliphatic polyester fiber “cores” using LBL method. The aliphatic polyester core was also removed selectively to confirm the existence of a multilayered shell, obtaining hollow fibers. [less ▲]

Detailed reference viewed: 65 (14 ULg)
Full Text
Peer Reviewed
See detailDevelopment of a procedure to simultaneously isolate RNA, DNA, and proteins from characterizing cells invading or cultured on chitosan scaffolds.
Tchemtchoua Tateu, Victor ULg; Atanasova, Ganka; Aqil, Abdelhafid ULg et al

in Analytical Biochemistry (2009), 393(1), 145-7

For many years, chitosan and its derivatives have been considered to be promising biomaterials for tissue engineering and repair. However, information regarding their biological effect on cell phenotype ... [more ▼]

For many years, chitosan and its derivatives have been considered to be promising biomaterials for tissue engineering and repair. However, information regarding their biological effect on cell phenotype is usually limited to evaluation of cell proliferation and survival, overlooking proteomic and transcriptomic analysis. This is largely related to the lack of efficient and quantitative procedures for protein and nucleic acid purification from cells cultured on, or inside, chitosan scaffold. Here we describe an ultracentrifugation procedure enabling the simultaneous and quantitative recovery of high quality RNA, DNA and proteins from cells growing in close contact of biomaterial matrices containing chitosan. [less ▲]

Detailed reference viewed: 52 (12 ULg)
See detailDesign of thermoresponsive inorganic nanoparticles
Aqil, Abdelhafid ULg; Jérôme, Christine ULg

Conference (2008, November 28)

Detailed reference viewed: 15 (4 ULg)