References of "Marchot, Pierre"
     in
Bookmark and Share    
Peer Reviewed
See detailMoisture profiles determination during convective drying using X-ray microtomography
Léonard, Angélique ULg; Blacher, Silvia ULg; Marchot, Pierre ULg et al

in Proceedings of the 3rd World Congress on Industrial Process Tomography, Banff, Canada (2003, September)

Detailed reference viewed: 6 (0 ULg)
Full Text
Peer Reviewed
See detailRétention gazeuse dans une colonne à bulles contenant un liquide visqueux non-newtonien
Fransolet, Emmanuelle; Coumont, V.; Crine, Michel ULg et al

in Tribune de l'Eau (La) (2003), 56(622), 15-20

Detailed reference viewed: 29 (2 ULg)
Peer Reviewed
See detailPerspectives in data fusion between x-ray computed tomography and electrical capacitance tomography in an absorption column
Toye, Dominique ULg; L'Homme, Guy ULg; Crine, Michel ULg et al

in Dyakowski, T.; Kantzas, A.; Ronson, P. (Eds.) Proceedings of 3rd World Congress on Industrial Process Tomography, Banff, Canada, 2-5 septembre 2003 (2003)

Detailed reference viewed: 18 (2 ULg)
Peer Reviewed
See detailDétermination du régime hydrodynamique dans une colonne à bulles par tomographie électrique résistive
Marchot, Pierre ULg; Fransolet, Emmanuelle; L'Homme, Guy ULg et al

in Legrand, J. (Ed.) Récents Progrès en Génie des procédés - N°90 - Du rayonnement scientifique à la diffusion des technologies - Actes du 9ème Congrès de la Société Française de Génie des Procédés, 9-11 septembre 2003, Saint-Nazaire, France (2003)

Detailed reference viewed: 40 (4 ULg)
Full Text
Peer Reviewed
See detailMultiscale texture characterization of wastewater sludges dried in a convective rig
Léonard, Angélique ULg; Blacher, Silvia ULg; Pirard, René ULg et al

in Drying Technology (2003), 21(8), 1507-1526

Secondary sludges from two different wastewater treatment plants are conditioned and dewatered in the same way before drying in a lab-scale convective rig at the same operating conditions. Several ... [more ▼]

Secondary sludges from two different wastewater treatment plants are conditioned and dewatered in the same way before drying in a lab-scale convective rig at the same operating conditions. Several techniques are used to characterize the texture of the dried materials over a wide range of scales from nm up to mm. Texture and porosity of the dried products are studied by SEM imaging, nitrogen absorption isotherms (0.5 < d(p) < 50 nm), mercury porosimetry (7.5 nm < d(p) < 150 mum) and X-ray microtomography (spatial resolution= 41 mum). The image analysis of cross-sections reconstructed by microtomography also allows following shrinkage and textural evolution during drying. [less ▲]

Detailed reference viewed: 34 (7 ULg)
Full Text
Peer Reviewed
See detailElectrical resistance tomography sensor simulations: comparison with experiments
Fransolet, E.; Crine, Michel ULg; L'Homme, Guy ULg et al

in Measurement Science & Technology (2002), 13(8), 1239-1247

This paper compares experimental results (differences of potential), obtained with a 16-electrode electrical resistance tomography (ERT) device using the adjacent-electrode pair measurement strategy, with ... [more ▼]

This paper compares experimental results (differences of potential), obtained with a 16-electrode electrical resistance tomography (ERT) device using the adjacent-electrode pair measurement strategy, with finite-element method (FEM) simulations in two and three dimensions. In the first part of the paper, ERT measurements made on a homogeneous medium are compared with two- and three-dimensional FEM simulations. It is shown that the dependence of the electrical field on the axial coordinate cannot be neglected. Consequently, only the three-dimensional FEM simulations are able to fit the experimental results. In the second part of the paper, ERT measurements on static physical phantoms immersed in water evidence that ERT is significantly more sensitive to non-symmetrical distributions than to symmetrical ones. This observation is confirmed by three-dimensional FEM simulations performed on numerical phantoms that mimic the physical ones. In the last part of the paper, an attempt to use three-dimensional simulations to determine the characteristics (diameter and gas content) of a gas core created by injecting a gas flow from a single-orifice gas sparger leads to promising results. [less ▲]

Detailed reference viewed: 38 (0 ULg)
Peer Reviewed
See detailGas-liquid-solid bubble column investigation by electrical resistance tomography
Marchot, Pierre ULg; Fransolet, Emmanuelle; Crine, Michel ULg et al

Conference (2002)

Detailed reference viewed: 6 (1 ULg)
Peer Reviewed
See detailRétention gazeuse dans une colonne à bulles contenant un liquide visqueux non-newtonien
Fransolet, Emmanuelle; Coumont, Valérie; Crine, Michel ULg et al

Poster (2002)

Detailed reference viewed: 54 (0 ULg)
Peer Reviewed
See detailComparison between temporal pressure and ERT signals in a bubble column
Fransolet, Emmanuelle; Toye, Dominique ULg; Crine, Michel ULg et al

Conference (2002)

Detailed reference viewed: 3 (0 ULg)
Full Text
Peer Reviewed
See detailUse of X-ray microtomography to follow the convective heat drying of wastewater sludges
Léonard, Angélique ULg; Blacher, Silvia ULg; Marchot, Pierre ULg et al

in Drying Technology (2002), 20(4-5), 1053-1069

X-ray microtomography is proposed as a new tool to investigate the evolution of size, shape and texture of soft materials during a drying operation. This study is focused on the drying of mechanically ... [more ▼]

X-ray microtomography is proposed as a new tool to investigate the evolution of size, shape and texture of soft materials during a drying operation. This study is focused on the drying of mechanically dewatered sludges from a secondary wastewater treatment. The shrinkage phenomenon is shown to play a crucial role in the control of the drying process. The shrinkage curves are determined by analysing the shape and size of cross sectional microtomographic images of sludge extrudates at different levels of drying. The observation of drying and shrinkage curves allows us to determine 3 critical water content values, which define different drying zones where extragranular, intragranular or mixed limitations prevail. When drying is externally controlled. the decrease of the drying rate observed during experiments can be related to the reduction of the external area of the sample, i.e., to shrinkage. When drying is internally controlled, resistances inside the solid govern the process. Between these two extreme situations, the drying rate reduction is the result of both the external area decrease and the development of internal resistances limiting drying. A multizone model is proposed to describe quantitatively these observations. The analysis of the internal texture of the Sludge extrudates reveal, crack formation at the end of the drying process. The onset of crack formation is clearly related to the appearance of internal transfer limitations. i.e., humidity and temperature gradients inside the material. [less ▲]

Detailed reference viewed: 77 (22 ULg)
Full Text
Peer Reviewed
See detailSuivi du procédé de séchage thermique de boues d'épuration par microtomographie aux rayons X
Léonard, Angélique ULg; Blacher, Silvia ULg; Marchot, Pierre ULg et al

in Latifi, A.; Boudrant, J.; Tonde, J. (Eds.) Récents progrès en génie des procédés N°82 Vol.15 2001 : information, modélisation, simulation et optimisation (2001, October)

Detailed reference viewed: 57 (3 ULg)
Peer Reviewed
See detailUse of X-ray microtomography to follow the convective heat drying of wastewater sludges
Léonard, Angélique ULg; Blacher, Silvia ULg; Marchot, Pierre ULg et al

in Proceedings of the 6th World Congress of Chemical Engineering (2001, September)

Detailed reference viewed: 11 (3 ULg)
Full Text
Peer Reviewed
See detailX-ray microtomography : a new tool to follow soft material shrinkage during convective drying
Léonard, Angélique ULg; Blacher, Silvia ULg; Marchot, Pierre ULg et al

in Proceedings of the 2nd World Congress on Industrial Process Tomography, Hannover, Germany, Aug 29-31, 2001 (2001, August)

Detailed reference viewed: 17 (1 ULg)
Peer Reviewed
See detailBubble columns : local gas holdup determination by electrical resistance tomography
Fransolet, Emmanuelle; Crine, Michel ULg; L'Homme, Guy ULg et al

Poster (2001)

Detailed reference viewed: 9 (0 ULg)