References of "Hubert, Philippe"
     in
Bookmark and Share    
Full Text
Peer Reviewed
See detailA BAYESIAN PROBABILITY CRITERION TO ASSESS ANALYTICAL RESULTS RELIABILITY
Rozet, Eric ULg; Lebrun, Pierre ULg; Boulanger, B et al

Conference (2013, May 21)

In pharmaceutical and biomedical industries, quantitative analytical methods such as HPLC play a key role. Indeed, the analytical results obtained from them are used to make crucial decisions such as the ... [more ▼]

In pharmaceutical and biomedical industries, quantitative analytical methods such as HPLC play a key role. Indeed, the analytical results obtained from them are used to make crucial decisions such as the release of batches of drugs, the evaluation of safety and efficacy of new drug candidates or the monitoring of patients health. Prior to their routine use, analytical methods are submitted to a stringent validation study [1] where they have to demonstrate that they are fit for their final purpose, i.e. providing accurate results: where is the analytical result, is the theoretical unknown true concentration of analyte in the sample analyzed and a regulatory acceptance limit. Typically this demonstration is made by either providing point estimates of systematic error (bias) and random error (variance) or sometimes by providing interval estimates of these statistical parameters at several well defined concentration levels of the target analyte [2]. They are then compared to maximum acceptable levels. More recently, tolerance intervals approaches have been proposed that are evaluated in a similar way at these key concentration levels [3]. However none of these decision approaches allow knowing the probability to obtain accurate results over the whole concentration range of interest: is a vector of parameters and Pmin is a minimum reliability probability. Frequentist approximations have been proposed to estimate this probability but only at the concentration levels experimentally tested [4,5]. In this work, a linear hierarchical Bayesian approach is proposed. It takes into account the potential random characteristic of the slope and intercept observed from one analytical run to the other, but it also integrates the possible covariance between the parameters. Additionally, heteroscedasticity of the residual variance over the concentration range investigated is taken into account. A situation regularly observed in practice. Finally a reliability profile for the whole concentration range studied is obtained using MCMC sampling. This profile provides the probability (Prel) to obtain accurate results over the full concentration range investigated. This profile is then compared to a minimum reliability probability (Pmin) that will define the valid concentration range of the analytical method. The usefulness of this approach is illustrated through the validation of a bioanalytical method and also compared with one concentration level at a time frequentist approaches [4,5]. [1] International Conference on Harmonization (ICH) of Technical Requirements for registration of Pharmaceuticals for Human Use Topic Q2 (R1): Validation of Analytical Procedures: Text and Methodology, Geneva, 2005. [2] A. Bouabidi and al., J. Chromatogr. A, 1217 (2010) 3180. [3] Ph. Hubert and al., J. Pharm. Biomed. Anal., 36 (2004) 579. [4] W. Dewé and al., Chemometr. Intell. Lab. Syst. 85 (2007) 262. [5] B. Govaerts and al., Qual. Reliab. Engng. Int. 24 (2008) 667. [less ▲]

Detailed reference viewed: 24 (4 ULg)
Full Text
See detailMEASURING VARIABILITY SOURCES IN NMR METABOLOMIC STUDIES
Rozet, Eric ULg; De Tullio, Pascal ULg; Hubert, Philippe ULg et al

Conference (2013, May 13)

Due to the huge amount of information available in NMR spectra obtained from the analysis of metabolomic experiments, multivariate analysis such as Principal Component Analysis (PCA) are required to ... [more ▼]

Due to the huge amount of information available in NMR spectra obtained from the analysis of metabolomic experiments, multivariate analysis such as Principal Component Analysis (PCA) are required to understand the influence of treatments over the metabolites [1]. However, many experiments in metabolomics studies have more complexes variability structures than simply comparing several treatments: they may include time effects, biological effects such as diet or hormonal status, and other blocking factors or variability sources: samples stability, age of the individuals, pH of a buffer, days of acquisition, and so on. Metabolomic data analysis needs to extract from the spectral data matrix the variations linked to a change indicated in the factor of interest. However other sources of variability may impair this objective. This stresses the importance to discover the sources of variability of the spectral metabolomic data using appropriate methodology. Classically, to analyze such data analysis of variance (ANOVA) or multivariate ANOVA (MANOVA) [2] is used. However direct application of these methodologies to NMR spectra obtained from structured metabolomics studies is inappropriate or impossible. More complex data analyses methodologies are required to understand the importance of the various factors implied in the experiments and to provide a measure of their variance components. Three related methodologies have been proposed to achieve this: ASCA [3], ANOVA-PCA [4] and AComDim [5]. The ASCA and ANOVA-PCA methodologies combine first an analysis of variance step (ANOVA) and then a PCA step. The AComDim one adds to the output of the ANOVA-PCA step a multi-block analysis. In this presentation, the usefulness and applicability of these advanced techniques to data analysis of NMR metabolomic spectra are provided to highlight the increase of knowledge gained and the estimation of main sources of variability arising in an experimental setup. Two NMR databases will be used [6]. The first one concerns human serum analyzed by 1H-NMR where three random factors are present: day of measurement (3 days), sample (2 samples per individual) and replication of analyses as well as two fixed controlled factors, time of measurement after thawing (2 times) and two protein suppression methods for the spectral pre-treatment. The second database is about the 1H-NMR analyses of rats’ urine where two different concentrations of citrate and of hippurate were deliberately added and three other sources of variability are present: urine pool diluted or not diluted, repetitions of analyses, days of analyses (three days), as well as two different spectral pre-treatment procedures. [less ▲]

Detailed reference viewed: 42 (6 ULg)
Full Text
Peer Reviewed
See detailNON-ANTHOCYANIN POLYPHENOLS QUANTIFICATION IN EUTERPE OLERACEA FRUITS BY A UHPLC−LTQ-ORBITRAP MS METHOD
Dias, Aecio; Rozet, Eric ULg; Chataigné, G et al

Poster (2013, May)

High antioxidant and anti-inflammatory activities have been observed from non-anthocyanin polyphenols of E. oleracea fruits [1-2]. The aim of this work was to quantify major non-anthocyanin polyphenols by ... [more ▼]

High antioxidant and anti-inflammatory activities have been observed from non-anthocyanin polyphenols of E. oleracea fruits [1-2]. The aim of this work was to quantify major non-anthocyanin polyphenols by an accurate UHPLC−LTQ-Orbitrap MS method. Fruits were harvested in Pará state (Brazil), processed to pulp and lyophilised. 0.5g of dry pulp powder was defatted by sonication with petroleum ether. The residue was then extracted five times with 5mL MeOH each time for 30 min (optimized conditions giving recovery rates > 90%). The extract was evaporated to dryness with a RapidVap® evaporator at 35°C. Solubilization of the dried extract was realised using 40% MeOH. For the UHPLC quantification, a HSS C18 column (1.8µm) was used with a gradient elution of MeOH and H2O both with 0.1% HCOOH and the ionisation source (ESI) was operated in NI mode. 26 compounds were identified, among them 7 identified for the first time in this fruit. Total error and accuracy profiles were used as validation criteria. Calibration in the matrix was found to be more accurate than calibration without matrix. Trueness, repeatability, intermediate precision, selectivity, response function, linearity and LOD/LOQ for 12 non-anthocyanin phenolic compounds were evaluated and the quantification method validated. [1] J. Kang et al., Food Chem. 122 (2010) 610–617. [2] J. Kang et al., Food Chem. 128 (2011) 152–157. [less ▲]

Detailed reference viewed: 55 (4 ULg)
Full Text
Peer Reviewed
See detailFalsification des médicaments: mythe ou réalité ?
Marini Djang'Eing'A, Roland ULg; Fillet, Marianne ULg; Vancauwenberghe, Roy et al

Conference (2013, April 24)

La santé publique est de nos jours minée par la problématique des médicaments falsifiés ou de qualité inférieure, avec plusieurs conséquences sanitaires, économiques voire professionnelles. On estime à 7 ... [more ▼]

La santé publique est de nos jours minée par la problématique des médicaments falsifiés ou de qualité inférieure, avec plusieurs conséquences sanitaires, économiques voire professionnelles. On estime à 7% la part du marché pharmaceutique mondial que représenterait ce fléau; l’Afrique, l’Asie et de nombreux pays d'Amérique latine étant les régions les plus touchées avec plus de 30% de médicaments falsifiés. D’après l'OMS, plus de 50% des médicaments achetés à partir des sites internet illégaux sont contrefaits, annihilant très fortement les chances de succès thérapeutique. Ces médicaments viennent dans la plupart des cas des pays asiatiques et de l’Eurasie. Le trafic de faux médicaments est un crime contre l'humanité qui représente environ 50 milliards de dollars par an (10-15 % de plus que le marché de la drogue). Au travers de deux leçons, la situation de la falsification des médicaments sera présentée au grand public dans le but de le sensibiliser à ce fléau. La première leçon présentera la situation en Europe avec un accent sur la Belgique. La problématique du droit à la propriété intellectuelle et de l’encadrement législatif sera abordée, ainsi que la falsification des médicaments modernes et des phytomédicaments, ces derniers étant utilisés par plus de 40% de la population en Europe et aux Etats-Unis. Dans la seconde leçon sera abordée la situation vécue en Afrique. L’approvisionnement en médicaments de qualité par le partage de l’information sera présenté ainsi que les moyens analytiques à la disposition de ce continent pour combattre ce fléau. Des membres du Département de Pharmacie de l’Université de Liège, de l’Agence Fédérale des Médicaments et des Produits de Santé ainsi que du programme QUAMED (Quality Medicines for All) feront partager leur expérience sur cette question d’une brûlante actualité.  [less ▲]

Detailed reference viewed: 52 (12 ULg)
Full Text
See detailValidation methodologies of near infrared spectroscopy methods in pharmaceutical applications
Chavez, Pierre-François ULg; De Bleye, Charlotte ULg; Sacre, Pierre-Yves ULg et al

in European Pharmaceutical Review (2013), 18(1), 3-6

As any analytical methods, a mandatory step at the end of the development of a near infrared spectroscopy (NIRS) method is the validation. This step enables to give enough guarantees that each future ... [more ▼]

As any analytical methods, a mandatory step at the end of the development of a near infrared spectroscopy (NIRS) method is the validation. This step enables to give enough guarantees that each future results coming from the application of the method in routine will be closed enough to the true value. However, from the literature, a minority of NIRS methods are thoroughly validated despite of the guidelines published by different group and regulatory authorities to help analyst to adequately decide if his method can be considered as valid. In this context, the aim of this review is to offer a critical overview of the different validation methodologies applied to assess the validity of quantitative methods using near infrared spectroscopy used in the field of pharmacy. [less ▲]

Detailed reference viewed: 144 (22 ULg)
Full Text
Peer Reviewed
See detailDesign Spaces for Analytical Methods
Rozet, Eric ULg; Lebrun, Pierre ULg; Debrus, Benjamin ULg et al

in Trends in Analytical Chemistry (2013), 42

Since the adoption of the ICH Q8 document concerning the development of pharmaceutical processes following a Quality by Design (QbD) approach, there have been many discussions on the opportunity for ... [more ▼]

Since the adoption of the ICH Q8 document concerning the development of pharmaceutical processes following a Quality by Design (QbD) approach, there have been many discussions on the opportunity for analytical method developments to follow a similar approach. A key component of the QbD paradigm is the definition of the Design Space of analytical methods where assurance of quality is provided. Several Design Spaces for analytical methods have been published, stressing the importance of this concept. This paper aims at explaining what is an analytical method Design Space, why it is useful for the robust development and optimization of analytical methods and how to build such a Design Space. A strong emphasis is made by distinguishing the usual mean response surface approach, overlapping mean response surfaces and the desirability function one to other probabilistic approaches as only these last ones correctly define a Design Space. In addition, recent publications assessing the Design Space of analytical methods are reviewed and discussed. [less ▲]

Detailed reference viewed: 437 (30 ULg)
Full Text
Peer Reviewed
See detailA Bayesian Design Space for analytical methods based on multivariate models and predictions
Lebrun, Pierre ULg; Boulanger, Bruno ULg; Debrus, Benjamin ULg et al

in Journal of Biopharmaceutical Statistics (2013), 23

The International Conference for Harmonization (ICH) has released regulatory guidelines for Pharmaceutical Development. In the document ICH Q8, The Design Space of a process is presented as the set of ... [more ▼]

The International Conference for Harmonization (ICH) has released regulatory guidelines for Pharmaceutical Development. In the document ICH Q8, The Design Space of a process is presented as the set of factor settings providing satisfactory results. However, ICH Q8 does not propose any practical methodology to define, derive and compute Design Space. In parallel, in the last decades, it has been observed that the diversity and the quality of analytical methods have evolved exponentially allowing substantial gains in selectivity and sensitivity. However, there is still a lack for a rationale towards the development of robust separation methods in a systematic way. Applying ICH Q8 to analytical methods provides a methodology for predicting a region of the space of factors in which results will be reliable. Combining design of experiments and Bayesian standard multivariate regression, an identified form of the predictive distribution of a new response vector has been identified and used, under non-informative as well as informative prior distributions of the parameters. From the responses and their predictive distribution, various critical quality attributes can be easily derived. This Bayesian framework was then extended to the multi-criteria setting to estimate the predictive probability that several critical quality attributes will be jointly achieved in the future use of an analytical method. An example based on a high-performance liquid chromatography (HPLC) method is given. For this example, a constrained sampling scheme was applied to ensure the modeled responses have desirable properties. [less ▲]

Detailed reference viewed: 197 (59 ULg)
Full Text
Peer Reviewed
See detailATR-IR and Raman spectroscopic study of interaction between major calixarene derivatives and oral anticoagulants
Tiuca, Ioana; Saponar, Alina; Bodoki, Andreea et al

in Farmacia (2013), 61(5), 874-882

In this study we analyzed by ATR-IR and Raman spectroscopy the interaction between six major calixarene derivatives and two anticoagulants: warfarin and acenocoumarol. The six calixarene derivatives were ... [more ▼]

In this study we analyzed by ATR-IR and Raman spectroscopy the interaction between six major calixarene derivatives and two anticoagulants: warfarin and acenocoumarol. The six calixarene derivatives were: p-tert-butyl-calix[4]arene (C4), p-tert- butyl-calix[6]arene (C6) and p-tert-butyl-calix[8]arene (C8) and their ethyl-ester- derivatives: tetraester-p-tert-butyl-calix[4]arene (C4Es4), hexaester-p-tert-butyl- calix[6]arene (C6Es6), octaester-p-tert-butyl-calix[8]arene (C8Es8). The results showed the most intense interaction in terms of complex formation for the C6-acenocoumarol couple and for the C6-warfarin couple, respectively. [less ▲]

Detailed reference viewed: 31 (2 ULg)
Full Text
Peer Reviewed
See detailPAT tools for the control of co-extrusion implants manufacturing process
Krier, Fabrice ULg; Mantanus, Jérome; Sacre, Pierre-Yves ULg et al

in International Journal of Pharmaceutics (2013), 458

Hot melt extrusion is a novel pharmaceutical manufacturing process technique. In this study, we identified four Critical Quality Attributes (CQAs) of the implant manufacturing process by hot melt ... [more ▼]

Hot melt extrusion is a novel pharmaceutical manufacturing process technique. In this study, we identified four Critical Quality Attributes (CQAs) of the implant manufacturing process by hot melt extrusion: the implant diameter, the quantity of the Active Pharmaceutical Ingredient (API), the homogeneity distribution of API and the thickness of the membrane. We controlled the implant diameter and the quantity of API in-line with a laser measurement, NIR and Raman spectroscopy, respectively. These two different spectroscopic techniques provided comparable results. In fact, the RMSEC and RMSECV were very close in each PAT technique but NIR spectroscopy was easier to use and less sensitive to external changes. For the control of the homogeneity of API distribution and the thickness of the membrane, we used successfully Raman spectroscopy imaging. These PAT tools help reducing analysis time. [less ▲]

Detailed reference viewed: 37 (19 ULg)
Full Text
Peer Reviewed
See detailUsefulness of Information Criteria for the Selection of Calibration Curves
Rozet, Eric ULg; Ziemons, Eric ULg; Marini Djang'Eing'A, Roland ULg et al

in Analytical Chemistry (2013), 85

The reliability of analytical results obtained with quantitative analytical methods is highly dependant upon the selection of the adequate model used as calibration curve. To select the adequate response ... [more ▼]

The reliability of analytical results obtained with quantitative analytical methods is highly dependant upon the selection of the adequate model used as calibration curve. To select the adequate response function or model the most used and known parameter is the determination coefficient R². However it is well known that it suffers many inconvenient, such as leading to overfitting the data. A solution proposed is to use the adjusted determination coefficient R²adj that aims at reducing this problem. However there is another family of criteria that exists to allow the selection of an adequate model: the information criteria AIC, AICc and BIC. These criteria have rarely been used in analytical chemistry to select the adequate calibration curve. This works aims at assessing the performance of the statistical information criteria as well as R² and R²adj for the selection of an adequate calibration curve. They are applied to several analytical methods covering liquid chromatographic methods as well as electrophoretic ones involved in the analysis of active substances in biological fluids or aimed at quantifying impurities in drug substances. In addition, Monte-Carlo simulations are performed to assess the efficacy of these statistical criteria to select the adequate calibration curve. [less ▲]

Detailed reference viewed: 39 (13 ULg)
Full Text
Peer Reviewed
See detailMethodology for the Validation of Analytical Methods involved in Uniformity of Dosage Units tests
Rozet, Eric ULg; Ziemons, Eric ULg; Marini Djang'Eing'A, Roland ULg et al

in Analytica Chimica Acta (2013), 760

Validation of analytical methods is required prior to their routine use. In addition, the current implementation of the Quality by Design (QbD) framework in the pharmaceutical industries aims at improving ... [more ▼]

Validation of analytical methods is required prior to their routine use. In addition, the current implementation of the Quality by Design (QbD) framework in the pharmaceutical industries aims at improving the quality of the end products starting from its early design stage. However, no regulatory guideline or none of the published methodologies to assess method validation propose decision methodologies that effectively take into account the final purpose of developed analytical methods. In this work a solution is proposed for the specific case of validating analytical methods involved in the assessment of the Content Uniformity or Uniformity of Dosage Units of a batch of pharmaceutical drug products as proposed in the European or US pharmacopoeias. This methodology uses statistical tolerance intervals as decision tools. Moreover it adequately defines the Analytical Target Profile of analytical methods in order to obtain analytical methods that allow to make correct decisions about Content Uniformity or Uniformity of Dosage Units with high probability. The applicability of the proposed methodology is further illustrated using an HPLC-UV assay as well as a Near Infra-Red Spectrophotometric method. [less ▲]

Detailed reference viewed: 53 (12 ULg)
Full Text
Peer Reviewed
See detailImplementation of a Design Space Approach for Enantiomeric Separations in Polar Organic Solvent Chromatography
Nistor, Iolanda; Lebrun, Pierre ULg; Ceccato, Attilio ULg et al

in Journal of Pharmaceutical & Biomedical Analysis (2013), 74

This paper focuses on implementing a Design Space approach and on the critical process parameters (CPPs) to consider when applying the Quality by Design (QbD) concepts outlined in ICH Q8(R2), Q9 and Q10 ... [more ▼]

This paper focuses on implementing a Design Space approach and on the critical process parameters (CPPs) to consider when applying the Quality by Design (QbD) concepts outlined in ICH Q8(R2), Q9 and Q10 to analytical method development and optimization for three chiral compounds developed as modulators of small conductance calcium-activated potassium (SK) channels. In this sense, an HPLC method using a polysaccharide-based stationary phase containing a cellulose tris (4-chloro-3-methylphenylcarbamate) chiral selector in polar organic solvent chromatography mode was considered. The effects of trifluoroacetic acid (TFA) and n-hexane concentration in an acetonitrile (MeCN) mobile phase were investigated under a wide range of column temperatures. Good correlations were found between the observed data obtained after using a central composite design and the expected chromatographic behaviours predicted by applying the design of experiments-design space (DoE-DS) methodology. The critical quality attribute represented here by the separation criterion (Scrit) allowed assessing the quality of the enantioseparation. Baseline separation for the compounds of interest in an analysis time of less than 20 minutes was possible due to the original and powerful tools applied which facilitated an enhanced method comprehension. Finally, the advantage of the DoE-DS approach resides in granting the possibility to concurrently assess robustness and identify the optimal conditions which are compound dependent. [less ▲]

Detailed reference viewed: 72 (24 ULg)
Full Text
See detailIntérêt de la microscopie vibrationnelle dans la recherche de nouvelles formulations pharma-ceutiques à haute valeur ajoutée.
Sacre, Pierre-Yves ULg; Marini Djang'Eing'A, Roland ULg; Ziemons, Eric ULg et al

Report (2012)

La grande majorité des nouvelles molécules actives présente une faible biodisponibilité dans des formulations pharmaceutiques simples contenant principalement un ou plusieurs constituants et l’actif ... [more ▼]

La grande majorité des nouvelles molécules actives présente une faible biodisponibilité dans des formulations pharmaceutiques simples contenant principalement un ou plusieurs constituants et l’actif faiblement soluble dans l’eau. Dès lors, il est primordial d’investir dans la recherche de nouvelles formulations « plus sophistiquées » (formulations de demain) favorisant la solubilité de l’actif. Cependant cette recherche est limitée par celle de nouveaux outils analytiques pointus permettant de les caractériser, d’étudier les interactions au sein des formulations pharmaceutiques, de comprendre les mécanismes liès à leur formation et in fine de contrôler et garantir leur conformité. Par ailleurs, la Technologie Analytique des Procédés (PAT) est un concept développé par l’Administration Américaine des Aliments et des Médicaments (FDA) et soutenu par l’Agence Européenne des Médicaments (EMA). Ce concept qui devient de plus en plus incontournable (au niveau des dossiers d’Autorisation de Mise sur le Marché). La rapidité de mesure et le caractère non destructif de la spectroscopie vibrationnelle dont fait partie la microscopie Raman la rendent particulièrement compatibles avec ce concept. De plus, les techniques vibrationnelles de part l’absence de préparation de l’échantillon et de l’utilisation de solvant organique rencontrent également le concept de Chimie Verte et donc s’incrivent parfaitement dans un contexte de développement durable et respectueux de l’environnement. L’objectif du présent projet est d’explorer les potentialités de la microscopie Raman dans l’étude pointue des matrices complexes afin d’en améliorer les connaissances tant au niveau de leur charactérisation, des intéractions analyte-matrice que des mécanismes liés à leur formation. L’obtention de ces informations nécéssiteront la recherche de nouvelles méthodologies, outils et règles de décision dédicacés aux aspects qualitatifs et plus encore aux aspects quantiftatifs où l’accès à de telles données est très marginal. L’ensemble de cette recherche sera réalisée sur un modèle complexe, une formulation à haute valeur ajoutée issue de l’industrie pharmaceutique. [less ▲]

Detailed reference viewed: 38 (4 ULg)
Full Text
See detailModèles statistiques Bayésiens et méthodologies pour calculer le Design Space (OPTIMAL-DS)
Marini Djang'Eing'A, Roland ULg; Lebrun, Pierre ULg; Hubert, Philippe ULg

Report (2012)

La compréhension des procédés technologiques et industriels dans les secteurs (bio)pharmaceutiques, biotechnologiques, agroalimentaires et environnementaux doit permettre de se conformer aux lignes de ... [more ▼]

La compréhension des procédés technologiques et industriels dans les secteurs (bio)pharmaceutiques, biotechnologiques, agroalimentaires et environnementaux doit permettre de se conformer aux lignes de conduites initiées par la FDA ou d'autres organismes de contrôles. Notamment, le document ICH Q8 introduit les notions de "Process Analytical Technology", de "Quality by Design" et de "Design Space", ayant attraits à la qualité des procédés industriels, des procédés d'analyse ainsi qu'à la qualité des produits finis. Cependant, si les lignes de conduites pour ces exigences sont expliquées, aucune méthodologie pour les atteindre n'est donnée. Or, un nombre considérable de nouvelles entités chimiques sont synthétisées par les laboratoires pharmaceutiques, biotechnologiques ou agroalimentaires. Les producteurs de matières premières et/ou d’excipients (secteur chimique) ont également besoin de disposer rapidement de méthodes analytiques de contrôle qui leur permettront de s’assurer de la qualité de leurs produits. On comprend aisément la nécessité pour ces secteurs de disposer rapidement de résultats fiables puisque les activités de recherches mais aussi des investissements, souvent importants, sont orientés ou stoppés sur base de données chiffrées, produits par les méthodes analytiques. La production de résultats fiables et la démonstration de cette fiabilité sont donc économiquement fondamentales. Ce projet vise la mise au point de stratégies et de modèles génériques de développement automatisé de nouvelles méthodes analytiques séparatives, en se basant sur la modélisation des temps de rétention, la planification expérimentale, et le concept de Design Space. L’objectif connexe est d’appliquer cette méthodologie à l’optimisation de n’importe quel procédé. Le fait de pouvoir disposer d’une méthodologie de mise au point automatique de méthodes analytiques ou de tous procédés analytiques aura un impact significatif. Cette nouvelle technologie permettra de réduire de façon drastique le temps d’optimisation des méthodes et procédés, permettant une production plus efficiente de produits (pharmaceutique, cosmétique, agro-alimentaire ou biotechnologique) répondant aux spécifications du client. [less ▲]

Detailed reference viewed: 33 (1 ULg)